| /* | |
| * linux/arch/arm/kernel/smp.c | |
| * | |
| * Copyright (C) 2002 ARM Limited, All Rights Reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/delay.h> | |
| #include <linux/init.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/sched.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/cache.h> | |
| #include <linux/profile.h> | |
| #include <linux/errno.h> | |
| #include <linux/ftrace.h> | |
| #include <linux/mm.h> | |
| #include <linux/err.h> | |
| #include <linux/cpu.h> | |
| #include <linux/smp.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/irq.h> | |
| #include <linux/percpu.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/completion.h> | |
| #include <linux/atomic.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/cpu.h> | |
| #include <asm/cputype.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/pgalloc.h> | |
| #include <asm/processor.h> | |
| #include <asm/sections.h> | |
| #include <asm/tlbflush.h> | |
| #include <asm/ptrace.h> | |
| #include <asm/localtimer.h> | |
| /* | |
| * as from 2.5, kernels no longer have an init_tasks structure | |
| * so we need some other way of telling a new secondary core | |
| * where to place its SVC stack | |
| */ | |
| struct secondary_data secondary_data; | |
| enum ipi_msg_type { | |
| IPI_TIMER = 2, | |
| IPI_RESCHEDULE, | |
| IPI_CALL_FUNC, | |
| IPI_CALL_FUNC_SINGLE, | |
| IPI_CPU_STOP, | |
| }; | |
| int __cpuinit __cpu_up(unsigned int cpu) | |
| { | |
| struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu); | |
| struct task_struct *idle = ci->idle; | |
| pgd_t *pgd; | |
| int ret; | |
| /* | |
| * Spawn a new process manually, if not already done. | |
| * Grab a pointer to its task struct so we can mess with it | |
| */ | |
| if (!idle) { | |
| idle = fork_idle(cpu); | |
| if (IS_ERR(idle)) { | |
| printk(KERN_ERR "CPU%u: fork() failed\n", cpu); | |
| return PTR_ERR(idle); | |
| } | |
| ci->idle = idle; | |
| } else { | |
| /* | |
| * Since this idle thread is being re-used, call | |
| * init_idle() to reinitialize the thread structure. | |
| */ | |
| init_idle(idle, cpu); | |
| } | |
| /* | |
| * Allocate initial page tables to allow the new CPU to | |
| * enable the MMU safely. This essentially means a set | |
| * of our "standard" page tables, with the addition of | |
| * a 1:1 mapping for the physical address of the kernel. | |
| */ | |
| pgd = pgd_alloc(&init_mm); | |
| if (!pgd) | |
| return -ENOMEM; | |
| if (PHYS_OFFSET != PAGE_OFFSET) { | |
| #ifndef CONFIG_HOTPLUG_CPU | |
| identity_mapping_add(pgd, __pa(__init_begin), __pa(__init_end)); | |
| #endif | |
| identity_mapping_add(pgd, __pa(_stext), __pa(_etext)); | |
| identity_mapping_add(pgd, __pa(_sdata), __pa(_edata)); | |
| } | |
| /* | |
| * We need to tell the secondary core where to find | |
| * its stack and the page tables. | |
| */ | |
| secondary_data.stack = task_stack_page(idle) + THREAD_START_SP; | |
| secondary_data.pgdir = virt_to_phys(pgd); | |
| secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir); | |
| __cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data)); | |
| outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1)); | |
| /* | |
| * Now bring the CPU into our world. | |
| */ | |
| ret = boot_secondary(cpu, idle); | |
| if (ret == 0) { | |
| unsigned long timeout; | |
| /* | |
| * CPU was successfully started, wait for it | |
| * to come online or time out. | |
| */ | |
| timeout = jiffies + HZ; | |
| while (time_before(jiffies, timeout)) { | |
| if (cpu_online(cpu)) | |
| break; | |
| udelay(10); | |
| barrier(); | |
| } | |
| if (!cpu_online(cpu)) { | |
| pr_crit("CPU%u: failed to come online\n", cpu); | |
| ret = -EIO; | |
| } | |
| } else { | |
| pr_err("CPU%u: failed to boot: %d\n", cpu, ret); | |
| } | |
| secondary_data.stack = NULL; | |
| secondary_data.pgdir = 0; | |
| if (PHYS_OFFSET != PAGE_OFFSET) { | |
| #ifndef CONFIG_HOTPLUG_CPU | |
| identity_mapping_del(pgd, __pa(__init_begin), __pa(__init_end)); | |
| #endif | |
| identity_mapping_del(pgd, __pa(_stext), __pa(_etext)); | |
| identity_mapping_del(pgd, __pa(_sdata), __pa(_edata)); | |
| } | |
| pgd_free(&init_mm, pgd); | |
| return ret; | |
| } | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| static void percpu_timer_stop(void); | |
| /* | |
| * __cpu_disable runs on the processor to be shutdown. | |
| */ | |
| int __cpu_disable(void) | |
| { | |
| unsigned int cpu = smp_processor_id(); | |
| struct task_struct *p; | |
| int ret; | |
| ret = platform_cpu_disable(cpu); | |
| if (ret) | |
| return ret; | |
| /* | |
| * Take this CPU offline. Once we clear this, we can't return, | |
| * and we must not schedule until we're ready to give up the cpu. | |
| */ | |
| set_cpu_online(cpu, false); | |
| /* | |
| * OK - migrate IRQs away from this CPU | |
| */ | |
| migrate_irqs(); | |
| /* | |
| * Stop the local timer for this CPU. | |
| */ | |
| percpu_timer_stop(); | |
| /* | |
| * Flush user cache and TLB mappings, and then remove this CPU | |
| * from the vm mask set of all processes. | |
| */ | |
| flush_cache_all(); | |
| local_flush_tlb_all(); | |
| read_lock(&tasklist_lock); | |
| for_each_process(p) { | |
| if (p->mm) | |
| cpumask_clear_cpu(cpu, mm_cpumask(p->mm)); | |
| } | |
| read_unlock(&tasklist_lock); | |
| return 0; | |
| } | |
| static DECLARE_COMPLETION(cpu_died); | |
| /* | |
| * called on the thread which is asking for a CPU to be shutdown - | |
| * waits until shutdown has completed, or it is timed out. | |
| */ | |
| void __cpu_die(unsigned int cpu) | |
| { | |
| if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) { | |
| pr_err("CPU%u: cpu didn't die\n", cpu); | |
| return; | |
| } | |
| printk(KERN_NOTICE "CPU%u: shutdown\n", cpu); | |
| if (!platform_cpu_kill(cpu)) | |
| printk("CPU%u: unable to kill\n", cpu); | |
| } | |
| /* | |
| * Called from the idle thread for the CPU which has been shutdown. | |
| * | |
| * Note that we disable IRQs here, but do not re-enable them | |
| * before returning to the caller. This is also the behaviour | |
| * of the other hotplug-cpu capable cores, so presumably coming | |
| * out of idle fixes this. | |
| */ | |
| void __ref cpu_die(void) | |
| { | |
| unsigned int cpu = smp_processor_id(); | |
| idle_task_exit(); | |
| local_irq_disable(); | |
| mb(); | |
| /* Tell __cpu_die() that this CPU is now safe to dispose of */ | |
| complete(&cpu_died); | |
| /* | |
| * actual CPU shutdown procedure is at least platform (if not | |
| * CPU) specific. | |
| */ | |
| platform_cpu_die(cpu); | |
| /* | |
| * Do not return to the idle loop - jump back to the secondary | |
| * cpu initialisation. There's some initialisation which needs | |
| * to be repeated to undo the effects of taking the CPU offline. | |
| */ | |
| __asm__("mov sp, %0\n" | |
| " mov fp, #0\n" | |
| " b secondary_start_kernel" | |
| : | |
| : "r" (task_stack_page(current) + THREAD_SIZE - 8)); | |
| } | |
| #endif /* CONFIG_HOTPLUG_CPU */ | |
| /* | |
| * Called by both boot and secondaries to move global data into | |
| * per-processor storage. | |
| */ | |
| static void __cpuinit smp_store_cpu_info(unsigned int cpuid) | |
| { | |
| struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid); | |
| cpu_info->loops_per_jiffy = loops_per_jiffy; | |
| } | |
| /* | |
| * This is the secondary CPU boot entry. We're using this CPUs | |
| * idle thread stack, but a set of temporary page tables. | |
| */ | |
| asmlinkage void __cpuinit secondary_start_kernel(void) | |
| { | |
| struct mm_struct *mm = &init_mm; | |
| unsigned int cpu = smp_processor_id(); | |
| printk("CPU%u: Booted secondary processor\n", cpu); | |
| /* | |
| * All kernel threads share the same mm context; grab a | |
| * reference and switch to it. | |
| */ | |
| atomic_inc(&mm->mm_count); | |
| current->active_mm = mm; | |
| cpumask_set_cpu(cpu, mm_cpumask(mm)); | |
| cpu_switch_mm(mm->pgd, mm); | |
| enter_lazy_tlb(mm, current); | |
| local_flush_tlb_all(); | |
| cpu_init(); | |
| preempt_disable(); | |
| trace_hardirqs_off(); | |
| /* | |
| * Give the platform a chance to do its own initialisation. | |
| */ | |
| platform_secondary_init(cpu); | |
| /* | |
| * Enable local interrupts. | |
| */ | |
| notify_cpu_starting(cpu); | |
| local_irq_enable(); | |
| local_fiq_enable(); | |
| /* | |
| * Setup the percpu timer for this CPU. | |
| */ | |
| percpu_timer_setup(); | |
| calibrate_delay(); | |
| smp_store_cpu_info(cpu); | |
| /* | |
| * OK, now it's safe to let the boot CPU continue. Wait for | |
| * the CPU migration code to notice that the CPU is online | |
| * before we continue. | |
| */ | |
| set_cpu_online(cpu, true); | |
| while (!cpu_active(cpu)) | |
| cpu_relax(); | |
| /* | |
| * OK, it's off to the idle thread for us | |
| */ | |
| cpu_idle(); | |
| } | |
| void __init smp_cpus_done(unsigned int max_cpus) | |
| { | |
| int cpu; | |
| unsigned long bogosum = 0; | |
| for_each_online_cpu(cpu) | |
| bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy; | |
| printk(KERN_INFO "SMP: Total of %d processors activated " | |
| "(%lu.%02lu BogoMIPS).\n", | |
| num_online_cpus(), | |
| bogosum / (500000/HZ), | |
| (bogosum / (5000/HZ)) % 100); | |
| } | |
| void __init smp_prepare_boot_cpu(void) | |
| { | |
| unsigned int cpu = smp_processor_id(); | |
| per_cpu(cpu_data, cpu).idle = current; | |
| } | |
| void __init smp_prepare_cpus(unsigned int max_cpus) | |
| { | |
| unsigned int ncores = num_possible_cpus(); | |
| smp_store_cpu_info(smp_processor_id()); | |
| /* | |
| * are we trying to boot more cores than exist? | |
| */ | |
| if (max_cpus > ncores) | |
| max_cpus = ncores; | |
| if (ncores > 1 && max_cpus) { | |
| /* | |
| * Enable the local timer or broadcast device for the | |
| * boot CPU, but only if we have more than one CPU. | |
| */ | |
| percpu_timer_setup(); | |
| /* | |
| * Initialise the present map, which describes the set of CPUs | |
| * actually populated at the present time. A platform should | |
| * re-initialize the map in platform_smp_prepare_cpus() if | |
| * present != possible (e.g. physical hotplug). | |
| */ | |
| init_cpu_present(&cpu_possible_map); | |
| /* | |
| * Initialise the SCU if there are more than one CPU | |
| * and let them know where to start. | |
| */ | |
| platform_smp_prepare_cpus(max_cpus); | |
| } | |
| } | |
| static void (*smp_cross_call)(const struct cpumask *, unsigned int); | |
| void __init set_smp_cross_call(void (*fn)(const struct cpumask *, unsigned int)) | |
| { | |
| smp_cross_call = fn; | |
| } | |
| void arch_send_call_function_ipi_mask(const struct cpumask *mask) | |
| { | |
| smp_cross_call(mask, IPI_CALL_FUNC); | |
| } | |
| void arch_send_call_function_single_ipi(int cpu) | |
| { | |
| smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE); | |
| } | |
| static const char *ipi_types[NR_IPI] = { | |
| #define S(x,s) [x - IPI_TIMER] = s | |
| S(IPI_TIMER, "Timer broadcast interrupts"), | |
| S(IPI_RESCHEDULE, "Rescheduling interrupts"), | |
| S(IPI_CALL_FUNC, "Function call interrupts"), | |
| S(IPI_CALL_FUNC_SINGLE, "Single function call interrupts"), | |
| S(IPI_CPU_STOP, "CPU stop interrupts"), | |
| }; | |
| void show_ipi_list(struct seq_file *p, int prec) | |
| { | |
| unsigned int cpu, i; | |
| for (i = 0; i < NR_IPI; i++) { | |
| seq_printf(p, "%*s%u: ", prec - 1, "IPI", i); | |
| for_each_present_cpu(cpu) | |
| seq_printf(p, "%10u ", | |
| __get_irq_stat(cpu, ipi_irqs[i])); | |
| seq_printf(p, " %s\n", ipi_types[i]); | |
| } | |
| } | |
| u64 smp_irq_stat_cpu(unsigned int cpu) | |
| { | |
| u64 sum = 0; | |
| int i; | |
| for (i = 0; i < NR_IPI; i++) | |
| sum += __get_irq_stat(cpu, ipi_irqs[i]); | |
| #ifdef CONFIG_LOCAL_TIMERS | |
| sum += __get_irq_stat(cpu, local_timer_irqs); | |
| #endif | |
| return sum; | |
| } | |
| /* | |
| * Timer (local or broadcast) support | |
| */ | |
| static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent); | |
| static void ipi_timer(void) | |
| { | |
| struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent); | |
| irq_enter(); | |
| evt->event_handler(evt); | |
| irq_exit(); | |
| } | |
| #ifdef CONFIG_LOCAL_TIMERS | |
| asmlinkage void __exception_irq_entry do_local_timer(struct pt_regs *regs) | |
| { | |
| struct pt_regs *old_regs = set_irq_regs(regs); | |
| int cpu = smp_processor_id(); | |
| if (local_timer_ack()) { | |
| __inc_irq_stat(cpu, local_timer_irqs); | |
| ipi_timer(); | |
| } | |
| set_irq_regs(old_regs); | |
| } | |
| void show_local_irqs(struct seq_file *p, int prec) | |
| { | |
| unsigned int cpu; | |
| seq_printf(p, "%*s: ", prec, "LOC"); | |
| for_each_present_cpu(cpu) | |
| seq_printf(p, "%10u ", __get_irq_stat(cpu, local_timer_irqs)); | |
| seq_printf(p, " Local timer interrupts\n"); | |
| } | |
| #endif | |
| #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST | |
| static void smp_timer_broadcast(const struct cpumask *mask) | |
| { | |
| smp_cross_call(mask, IPI_TIMER); | |
| } | |
| #else | |
| #define smp_timer_broadcast NULL | |
| #endif | |
| static void broadcast_timer_set_mode(enum clock_event_mode mode, | |
| struct clock_event_device *evt) | |
| { | |
| } | |
| static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt) | |
| { | |
| evt->name = "dummy_timer"; | |
| evt->features = CLOCK_EVT_FEAT_ONESHOT | | |
| CLOCK_EVT_FEAT_PERIODIC | | |
| CLOCK_EVT_FEAT_DUMMY; | |
| evt->rating = 400; | |
| evt->mult = 1; | |
| evt->set_mode = broadcast_timer_set_mode; | |
| clockevents_register_device(evt); | |
| } | |
| void __cpuinit percpu_timer_setup(void) | |
| { | |
| unsigned int cpu = smp_processor_id(); | |
| struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu); | |
| evt->cpumask = cpumask_of(cpu); | |
| evt->broadcast = smp_timer_broadcast; | |
| if (local_timer_setup(evt)) | |
| broadcast_timer_setup(evt); | |
| } | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| /* | |
| * The generic clock events code purposely does not stop the local timer | |
| * on CPU_DEAD/CPU_DEAD_FROZEN hotplug events, so we have to do it | |
| * manually here. | |
| */ | |
| static void percpu_timer_stop(void) | |
| { | |
| unsigned int cpu = smp_processor_id(); | |
| struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu); | |
| evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); | |
| } | |
| #endif | |
| static DEFINE_SPINLOCK(stop_lock); | |
| /* | |
| * ipi_cpu_stop - handle IPI from smp_send_stop() | |
| */ | |
| static void ipi_cpu_stop(unsigned int cpu) | |
| { | |
| if (system_state == SYSTEM_BOOTING || | |
| system_state == SYSTEM_RUNNING) { | |
| spin_lock(&stop_lock); | |
| printk(KERN_CRIT "CPU%u: stopping\n", cpu); | |
| dump_stack(); | |
| spin_unlock(&stop_lock); | |
| } | |
| set_cpu_online(cpu, false); | |
| local_fiq_disable(); | |
| local_irq_disable(); | |
| while (1) | |
| cpu_relax(); | |
| } | |
| /* | |
| * Main handler for inter-processor interrupts | |
| */ | |
| asmlinkage void __exception_irq_entry do_IPI(int ipinr, struct pt_regs *regs) | |
| { | |
| unsigned int cpu = smp_processor_id(); | |
| struct pt_regs *old_regs = set_irq_regs(regs); | |
| if (ipinr >= IPI_TIMER && ipinr < IPI_TIMER + NR_IPI) | |
| __inc_irq_stat(cpu, ipi_irqs[ipinr - IPI_TIMER]); | |
| switch (ipinr) { | |
| case IPI_TIMER: | |
| ipi_timer(); | |
| break; | |
| case IPI_RESCHEDULE: | |
| scheduler_ipi(); | |
| break; | |
| case IPI_CALL_FUNC: | |
| generic_smp_call_function_interrupt(); | |
| break; | |
| case IPI_CALL_FUNC_SINGLE: | |
| generic_smp_call_function_single_interrupt(); | |
| break; | |
| case IPI_CPU_STOP: | |
| ipi_cpu_stop(cpu); | |
| break; | |
| default: | |
| printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%x\n", | |
| cpu, ipinr); | |
| break; | |
| } | |
| set_irq_regs(old_regs); | |
| } | |
| void smp_send_reschedule(int cpu) | |
| { | |
| smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE); | |
| } | |
| void smp_send_stop(void) | |
| { | |
| unsigned long timeout; | |
| if (num_online_cpus() > 1) { | |
| cpumask_t mask = cpu_online_map; | |
| cpu_clear(smp_processor_id(), mask); | |
| smp_cross_call(&mask, IPI_CPU_STOP); | |
| } | |
| /* Wait up to one second for other CPUs to stop */ | |
| timeout = USEC_PER_SEC; | |
| while (num_online_cpus() > 1 && timeout--) | |
| udelay(1); | |
| if (num_online_cpus() > 1) | |
| pr_warning("SMP: failed to stop secondary CPUs\n"); | |
| } | |
| /* | |
| * not supported here | |
| */ | |
| int setup_profiling_timer(unsigned int multiplier) | |
| { | |
| return -EINVAL; | |
| } |