| Sitronix ST7735R display panels |
| |
| This binding is for display panels using a Sitronix ST7735R controller in SPI |
| mode. |
| |
| Required properties: |
| - compatible: "jianda,jd-t18003-t01", "sitronix,st7735r" |
| - dc-gpios: Display data/command selection (D/CX) |
| - reset-gpios: Reset signal (RSTX) |
| |
| The node for this driver must be a child node of a SPI controller, hence |
| all mandatory properties described in ../spi/spi-bus.txt must be specified. |
| |
| Optional properties: |
| - rotation: panel rotation in degrees counter clockwise (0,90,180,270) |
| - backlight: phandle of the backlight device attached to the panel |
| |
| Example: |
| |
| backlight: backlight { |
| compatible = "gpio-backlight"; |
| gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; |
| } |
| |
| ... |
| |
| display@0{ |
| compatible = "jianda,jd-t18003-t01", "sitronix,st7735r"; |
| reg = <0>; |
| spi-max-frequency = <32000000>; |
| dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; |
| reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; |
| rotation = <270>; |
| backlight = &backlight; |
| }; |
