| /* | |
| * drivers/power/process.c - Functions for starting/stopping processes on | |
| * suspend transitions. | |
| * | |
| * Originally from swsusp. | |
| */ | |
| #undef DEBUG | |
| #include <linux/interrupt.h> | |
| #include <linux/suspend.h> | |
| #include <linux/module.h> | |
| #include <linux/syscalls.h> | |
| #include <linux/freezer.h> | |
| /* | |
| * Timeout for stopping processes | |
| */ | |
| #define TIMEOUT (20 * HZ) | |
| #define FREEZER_KERNEL_THREADS 0 | |
| #define FREEZER_USER_SPACE 1 | |
| static inline int freezeable(struct task_struct * p) | |
| { | |
| if ((p == current) || | |
| (p->flags & PF_NOFREEZE) || | |
| (p->exit_state != 0)) | |
| return 0; | |
| return 1; | |
| } | |
| /* | |
| * freezing is complete, mark current process as frozen | |
| */ | |
| static inline void frozen_process(void) | |
| { | |
| if (!unlikely(current->flags & PF_NOFREEZE)) { | |
| current->flags |= PF_FROZEN; | |
| wmb(); | |
| } | |
| clear_freeze_flag(current); | |
| } | |
| /* Refrigerator is place where frozen processes are stored :-). */ | |
| void refrigerator(void) | |
| { | |
| /* Hmm, should we be allowed to suspend when there are realtime | |
| processes around? */ | |
| long save; | |
| task_lock(current); | |
| if (freezing(current)) { | |
| frozen_process(); | |
| task_unlock(current); | |
| } else { | |
| task_unlock(current); | |
| return; | |
| } | |
| save = current->state; | |
| pr_debug("%s entered refrigerator\n", current->comm); | |
| spin_lock_irq(¤t->sighand->siglock); | |
| recalc_sigpending(); /* We sent fake signal, clean it up */ | |
| spin_unlock_irq(¤t->sighand->siglock); | |
| for (;;) { | |
| set_current_state(TASK_UNINTERRUPTIBLE); | |
| if (!frozen(current)) | |
| break; | |
| schedule(); | |
| } | |
| pr_debug("%s left refrigerator\n", current->comm); | |
| __set_current_state(save); | |
| } | |
| static void fake_signal_wake_up(struct task_struct *p) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&p->sighand->siglock, flags); | |
| signal_wake_up(p, 0); | |
| spin_unlock_irqrestore(&p->sighand->siglock, flags); | |
| } | |
| static int has_mm(struct task_struct *p) | |
| { | |
| return (p->mm && !(p->flags & PF_BORROWED_MM)); | |
| } | |
| /** | |
| * freeze_task - send a freeze request to given task | |
| * @p: task to send the request to | |
| * @with_mm_only: if set, the request will only be sent if the task has its | |
| * own mm | |
| * Return value: 0, if @with_mm_only is set and the task has no mm of its | |
| * own or the task is frozen, 1, otherwise | |
| * | |
| * The freeze request is sent by seting the tasks's TIF_FREEZE flag and | |
| * either sending a fake signal to it or waking it up, depending on whether | |
| * or not it has its own mm (ie. it is a user land task). If @with_mm_only | |
| * is set and the task has no mm of its own (ie. it is a kernel thread), | |
| * its TIF_FREEZE flag should not be set. | |
| * | |
| * The task_lock() is necessary to prevent races with exit_mm() or | |
| * use_mm()/unuse_mm() from occuring. | |
| */ | |
| static int freeze_task(struct task_struct *p, int with_mm_only) | |
| { | |
| int ret = 1; | |
| task_lock(p); | |
| if (freezing(p)) { | |
| if (has_mm(p)) { | |
| if (!signal_pending(p)) | |
| fake_signal_wake_up(p); | |
| } else { | |
| if (with_mm_only) | |
| ret = 0; | |
| else | |
| wake_up_state(p, TASK_INTERRUPTIBLE); | |
| } | |
| } else { | |
| rmb(); | |
| if (frozen(p)) { | |
| ret = 0; | |
| } else { | |
| if (has_mm(p)) { | |
| set_freeze_flag(p); | |
| fake_signal_wake_up(p); | |
| } else { | |
| if (with_mm_only) { | |
| ret = 0; | |
| } else { | |
| set_freeze_flag(p); | |
| wake_up_state(p, TASK_INTERRUPTIBLE); | |
| } | |
| } | |
| } | |
| } | |
| task_unlock(p); | |
| return ret; | |
| } | |
| static void cancel_freezing(struct task_struct *p) | |
| { | |
| unsigned long flags; | |
| if (freezing(p)) { | |
| pr_debug(" clean up: %s\n", p->comm); | |
| clear_freeze_flag(p); | |
| spin_lock_irqsave(&p->sighand->siglock, flags); | |
| recalc_sigpending_and_wake(p); | |
| spin_unlock_irqrestore(&p->sighand->siglock, flags); | |
| } | |
| } | |
| static int try_to_freeze_tasks(int freeze_user_space) | |
| { | |
| struct task_struct *g, *p; | |
| unsigned long end_time; | |
| unsigned int todo; | |
| struct timeval start, end; | |
| s64 elapsed_csecs64; | |
| unsigned int elapsed_csecs; | |
| do_gettimeofday(&start); | |
| end_time = jiffies + TIMEOUT; | |
| do { | |
| todo = 0; | |
| read_lock(&tasklist_lock); | |
| do_each_thread(g, p) { | |
| if (frozen(p) || !freezeable(p)) | |
| continue; | |
| if (!freeze_task(p, freeze_user_space)) | |
| continue; | |
| /* | |
| * Now that we've done set_freeze_flag, don't | |
| * perturb a task in TASK_STOPPED or TASK_TRACED. | |
| * It is "frozen enough". If the task does wake | |
| * up, it will immediately call try_to_freeze. | |
| */ | |
| if (!task_is_stopped_or_traced(p) && | |
| !freezer_should_skip(p)) | |
| todo++; | |
| } while_each_thread(g, p); | |
| read_unlock(&tasklist_lock); | |
| yield(); /* Yield is okay here */ | |
| if (time_after(jiffies, end_time)) | |
| break; | |
| } while (todo); | |
| do_gettimeofday(&end); | |
| elapsed_csecs64 = timeval_to_ns(&end) - timeval_to_ns(&start); | |
| do_div(elapsed_csecs64, NSEC_PER_SEC / 100); | |
| elapsed_csecs = elapsed_csecs64; | |
| if (todo) { | |
| /* This does not unfreeze processes that are already frozen | |
| * (we have slightly ugly calling convention in that respect, | |
| * and caller must call thaw_processes() if something fails), | |
| * but it cleans up leftover PF_FREEZE requests. | |
| */ | |
| printk("\n"); | |
| printk(KERN_ERR "Freezing of tasks failed after %d.%02d seconds " | |
| "(%d tasks refusing to freeze):\n", | |
| elapsed_csecs / 100, elapsed_csecs % 100, todo); | |
| show_state(); | |
| read_lock(&tasklist_lock); | |
| do_each_thread(g, p) { | |
| task_lock(p); | |
| if (freezing(p) && !freezer_should_skip(p)) | |
| printk(KERN_ERR " %s\n", p->comm); | |
| cancel_freezing(p); | |
| task_unlock(p); | |
| } while_each_thread(g, p); | |
| read_unlock(&tasklist_lock); | |
| } else { | |
| printk("(elapsed %d.%02d seconds) ", elapsed_csecs / 100, | |
| elapsed_csecs % 100); | |
| } | |
| return todo ? -EBUSY : 0; | |
| } | |
| /** | |
| * freeze_processes - tell processes to enter the refrigerator | |
| */ | |
| int freeze_processes(void) | |
| { | |
| int error; | |
| printk("Freezing user space processes ... "); | |
| error = try_to_freeze_tasks(FREEZER_USER_SPACE); | |
| if (error) | |
| goto Exit; | |
| printk("done.\n"); | |
| printk("Freezing remaining freezable tasks ... "); | |
| error = try_to_freeze_tasks(FREEZER_KERNEL_THREADS); | |
| if (error) | |
| goto Exit; | |
| printk("done."); | |
| Exit: | |
| BUG_ON(in_atomic()); | |
| printk("\n"); | |
| return error; | |
| } | |
| static void thaw_tasks(int thaw_user_space) | |
| { | |
| struct task_struct *g, *p; | |
| read_lock(&tasklist_lock); | |
| do_each_thread(g, p) { | |
| if (!freezeable(p)) | |
| continue; | |
| if (!p->mm == thaw_user_space) | |
| continue; | |
| thaw_process(p); | |
| } while_each_thread(g, p); | |
| read_unlock(&tasklist_lock); | |
| } | |
| void thaw_processes(void) | |
| { | |
| printk("Restarting tasks ... "); | |
| thaw_tasks(FREEZER_KERNEL_THREADS); | |
| thaw_tasks(FREEZER_USER_SPACE); | |
| schedule(); | |
| printk("done.\n"); | |
| } | |
| EXPORT_SYMBOL(refrigerator); |