| /* |
| * This file is part of STM32 ADC driver |
| * |
| * Copyright (C) 2016, STMicroelectronics - All Rights Reserved |
| * Author: Fabrice Gasnier <fabrice.gasnier@st.com>. |
| * |
| * Inspired from: fsl-imx25-tsadc |
| * |
| * License type: GPLv2 |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| * or FITNESS FOR A PARTICULAR PURPOSE. |
| * See the GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/interrupt.h> |
| #include <linux/irqchip/chained_irq.h> |
| #include <linux/irqdesc.h> |
| #include <linux/irqdomain.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| |
| #include "stm32-adc-core.h" |
| |
| /* STM32F4 - common registers for all ADC instances: 1, 2 & 3 */ |
| #define STM32F4_ADC_CSR (STM32_ADCX_COMN_OFFSET + 0x00) |
| #define STM32F4_ADC_CCR (STM32_ADCX_COMN_OFFSET + 0x04) |
| |
| /* STM32F4_ADC_CSR - bit fields */ |
| #define STM32F4_EOC3 BIT(17) |
| #define STM32F4_EOC2 BIT(9) |
| #define STM32F4_EOC1 BIT(1) |
| |
| /* STM32F4_ADC_CCR - bit fields */ |
| #define STM32F4_ADC_ADCPRE_SHIFT 16 |
| #define STM32F4_ADC_ADCPRE_MASK GENMASK(17, 16) |
| |
| /* STM32 F4 maximum analog clock rate (from datasheet) */ |
| #define STM32F4_ADC_MAX_CLK_RATE 36000000 |
| |
| /* STM32H7 - common registers for all ADC instances */ |
| #define STM32H7_ADC_CSR (STM32_ADCX_COMN_OFFSET + 0x00) |
| #define STM32H7_ADC_CCR (STM32_ADCX_COMN_OFFSET + 0x08) |
| |
| /* STM32H7_ADC_CSR - bit fields */ |
| #define STM32H7_EOC_SLV BIT(18) |
| #define STM32H7_EOC_MST BIT(2) |
| |
| /* STM32H7_ADC_CCR - bit fields */ |
| #define STM32H7_PRESC_SHIFT 18 |
| #define STM32H7_PRESC_MASK GENMASK(21, 18) |
| #define STM32H7_CKMODE_SHIFT 16 |
| #define STM32H7_CKMODE_MASK GENMASK(17, 16) |
| |
| /* STM32 H7 maximum analog clock rate (from datasheet) */ |
| #define STM32H7_ADC_MAX_CLK_RATE 72000000 |
| |
| /** |
| * stm32_adc_common_regs - stm32 common registers, compatible dependent data |
| * @csr: common status register offset |
| * @eoc1: adc1 end of conversion flag in @csr |
| * @eoc2: adc2 end of conversion flag in @csr |
| * @eoc3: adc3 end of conversion flag in @csr |
| */ |
| struct stm32_adc_common_regs { |
| u32 csr; |
| u32 eoc1_msk; |
| u32 eoc2_msk; |
| u32 eoc3_msk; |
| }; |
| |
| struct stm32_adc_priv; |
| |
| /** |
| * stm32_adc_priv_cfg - stm32 core compatible configuration data |
| * @regs: common registers for all instances |
| * @clk_sel: clock selection routine |
| */ |
| struct stm32_adc_priv_cfg { |
| const struct stm32_adc_common_regs *regs; |
| int (*clk_sel)(struct platform_device *, struct stm32_adc_priv *); |
| }; |
| |
| /** |
| * struct stm32_adc_priv - stm32 ADC core private data |
| * @irq: irq for ADC block |
| * @domain: irq domain reference |
| * @aclk: clock reference for the analog circuitry |
| * @bclk: bus clock common for all ADCs, depends on part used |
| * @vref: regulator reference |
| * @cfg: compatible configuration data |
| * @common: common data for all ADC instances |
| */ |
| struct stm32_adc_priv { |
| int irq; |
| struct irq_domain *domain; |
| struct clk *aclk; |
| struct clk *bclk; |
| struct regulator *vref; |
| const struct stm32_adc_priv_cfg *cfg; |
| struct stm32_adc_common common; |
| }; |
| |
| static struct stm32_adc_priv *to_stm32_adc_priv(struct stm32_adc_common *com) |
| { |
| return container_of(com, struct stm32_adc_priv, common); |
| } |
| |
| /* STM32F4 ADC internal common clock prescaler division ratios */ |
| static int stm32f4_pclk_div[] = {2, 4, 6, 8}; |
| |
| /** |
| * stm32f4_adc_clk_sel() - Select stm32f4 ADC common clock prescaler |
| * @priv: stm32 ADC core private data |
| * Select clock prescaler used for analog conversions, before using ADC. |
| */ |
| static int stm32f4_adc_clk_sel(struct platform_device *pdev, |
| struct stm32_adc_priv *priv) |
| { |
| unsigned long rate; |
| u32 val; |
| int i; |
| |
| /* stm32f4 has one clk input for analog (mandatory), enforce it here */ |
| if (!priv->aclk) { |
| dev_err(&pdev->dev, "No 'adc' clock found\n"); |
| return -ENOENT; |
| } |
| |
| rate = clk_get_rate(priv->aclk); |
| for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) { |
| if ((rate / stm32f4_pclk_div[i]) <= STM32F4_ADC_MAX_CLK_RATE) |
| break; |
| } |
| if (i >= ARRAY_SIZE(stm32f4_pclk_div)) { |
| dev_err(&pdev->dev, "adc clk selection failed\n"); |
| return -EINVAL; |
| } |
| |
| priv->common.rate = rate; |
| val = readl_relaxed(priv->common.base + STM32F4_ADC_CCR); |
| val &= ~STM32F4_ADC_ADCPRE_MASK; |
| val |= i << STM32F4_ADC_ADCPRE_SHIFT; |
| writel_relaxed(val, priv->common.base + STM32F4_ADC_CCR); |
| |
| dev_dbg(&pdev->dev, "Using analog clock source at %ld kHz\n", |
| rate / (stm32f4_pclk_div[i] * 1000)); |
| |
| return 0; |
| } |
| |
| /** |
| * struct stm32h7_adc_ck_spec - specification for stm32h7 adc clock |
| * @ckmode: ADC clock mode, Async or sync with prescaler. |
| * @presc: prescaler bitfield for async clock mode |
| * @div: prescaler division ratio |
| */ |
| struct stm32h7_adc_ck_spec { |
| u32 ckmode; |
| u32 presc; |
| int div; |
| }; |
| |
| const struct stm32h7_adc_ck_spec stm32h7_adc_ckmodes_spec[] = { |
| /* 00: CK_ADC[1..3]: Asynchronous clock modes */ |
| { 0, 0, 1 }, |
| { 0, 1, 2 }, |
| { 0, 2, 4 }, |
| { 0, 3, 6 }, |
| { 0, 4, 8 }, |
| { 0, 5, 10 }, |
| { 0, 6, 12 }, |
| { 0, 7, 16 }, |
| { 0, 8, 32 }, |
| { 0, 9, 64 }, |
| { 0, 10, 128 }, |
| { 0, 11, 256 }, |
| /* HCLK used: Synchronous clock modes (1, 2 or 4 prescaler) */ |
| { 1, 0, 1 }, |
| { 2, 0, 2 }, |
| { 3, 0, 4 }, |
| }; |
| |
| static int stm32h7_adc_clk_sel(struct platform_device *pdev, |
| struct stm32_adc_priv *priv) |
| { |
| u32 ckmode, presc, val; |
| unsigned long rate; |
| int i, div; |
| |
| /* stm32h7 bus clock is common for all ADC instances (mandatory) */ |
| if (!priv->bclk) { |
| dev_err(&pdev->dev, "No 'bus' clock found\n"); |
| return -ENOENT; |
| } |
| |
| /* |
| * stm32h7 can use either 'bus' or 'adc' clock for analog circuitry. |
| * So, choice is to have bus clock mandatory and adc clock optional. |
| * If optional 'adc' clock has been found, then try to use it first. |
| */ |
| if (priv->aclk) { |
| /* |
| * Asynchronous clock modes (e.g. ckmode == 0) |
| * From spec: PLL output musn't exceed max rate |
| */ |
| rate = clk_get_rate(priv->aclk); |
| |
| for (i = 0; i < ARRAY_SIZE(stm32h7_adc_ckmodes_spec); i++) { |
| ckmode = stm32h7_adc_ckmodes_spec[i].ckmode; |
| presc = stm32h7_adc_ckmodes_spec[i].presc; |
| div = stm32h7_adc_ckmodes_spec[i].div; |
| |
| if (ckmode) |
| continue; |
| |
| if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE) |
| goto out; |
| } |
| } |
| |
| /* Synchronous clock modes (e.g. ckmode is 1, 2 or 3) */ |
| rate = clk_get_rate(priv->bclk); |
| |
| for (i = 0; i < ARRAY_SIZE(stm32h7_adc_ckmodes_spec); i++) { |
| ckmode = stm32h7_adc_ckmodes_spec[i].ckmode; |
| presc = stm32h7_adc_ckmodes_spec[i].presc; |
| div = stm32h7_adc_ckmodes_spec[i].div; |
| |
| if (!ckmode) |
| continue; |
| |
| if ((rate / div) <= STM32H7_ADC_MAX_CLK_RATE) |
| goto out; |
| } |
| |
| dev_err(&pdev->dev, "adc clk selection failed\n"); |
| return -EINVAL; |
| |
| out: |
| /* rate used later by each ADC instance to control BOOST mode */ |
| priv->common.rate = rate; |
| |
| /* Set common clock mode and prescaler */ |
| val = readl_relaxed(priv->common.base + STM32H7_ADC_CCR); |
| val &= ~(STM32H7_CKMODE_MASK | STM32H7_PRESC_MASK); |
| val |= ckmode << STM32H7_CKMODE_SHIFT; |
| val |= presc << STM32H7_PRESC_SHIFT; |
| writel_relaxed(val, priv->common.base + STM32H7_ADC_CCR); |
| |
| dev_dbg(&pdev->dev, "Using %s clock/%d source at %ld kHz\n", |
| ckmode ? "bus" : "adc", div, rate / (div * 1000)); |
| |
| return 0; |
| } |
| |
| /* STM32F4 common registers definitions */ |
| static const struct stm32_adc_common_regs stm32f4_adc_common_regs = { |
| .csr = STM32F4_ADC_CSR, |
| .eoc1_msk = STM32F4_EOC1, |
| .eoc2_msk = STM32F4_EOC2, |
| .eoc3_msk = STM32F4_EOC3, |
| }; |
| |
| /* STM32H7 common registers definitions */ |
| static const struct stm32_adc_common_regs stm32h7_adc_common_regs = { |
| .csr = STM32H7_ADC_CSR, |
| .eoc1_msk = STM32H7_EOC_MST, |
| .eoc2_msk = STM32H7_EOC_SLV, |
| }; |
| |
| /* ADC common interrupt for all instances */ |
| static void stm32_adc_irq_handler(struct irq_desc *desc) |
| { |
| struct stm32_adc_priv *priv = irq_desc_get_handler_data(desc); |
| struct irq_chip *chip = irq_desc_get_chip(desc); |
| u32 status; |
| |
| chained_irq_enter(chip, desc); |
| status = readl_relaxed(priv->common.base + priv->cfg->regs->csr); |
| |
| if (status & priv->cfg->regs->eoc1_msk) |
| generic_handle_irq(irq_find_mapping(priv->domain, 0)); |
| |
| if (status & priv->cfg->regs->eoc2_msk) |
| generic_handle_irq(irq_find_mapping(priv->domain, 1)); |
| |
| if (status & priv->cfg->regs->eoc3_msk) |
| generic_handle_irq(irq_find_mapping(priv->domain, 2)); |
| |
| chained_irq_exit(chip, desc); |
| }; |
| |
| static int stm32_adc_domain_map(struct irq_domain *d, unsigned int irq, |
| irq_hw_number_t hwirq) |
| { |
| irq_set_chip_data(irq, d->host_data); |
| irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_level_irq); |
| |
| return 0; |
| } |
| |
| static void stm32_adc_domain_unmap(struct irq_domain *d, unsigned int irq) |
| { |
| irq_set_chip_and_handler(irq, NULL, NULL); |
| irq_set_chip_data(irq, NULL); |
| } |
| |
| static const struct irq_domain_ops stm32_adc_domain_ops = { |
| .map = stm32_adc_domain_map, |
| .unmap = stm32_adc_domain_unmap, |
| .xlate = irq_domain_xlate_onecell, |
| }; |
| |
| static int stm32_adc_irq_probe(struct platform_device *pdev, |
| struct stm32_adc_priv *priv) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| |
| priv->irq = platform_get_irq(pdev, 0); |
| if (priv->irq < 0) { |
| dev_err(&pdev->dev, "failed to get irq\n"); |
| return priv->irq; |
| } |
| |
| priv->domain = irq_domain_add_simple(np, STM32_ADC_MAX_ADCS, 0, |
| &stm32_adc_domain_ops, |
| priv); |
| if (!priv->domain) { |
| dev_err(&pdev->dev, "Failed to add irq domain\n"); |
| return -ENOMEM; |
| } |
| |
| irq_set_chained_handler(priv->irq, stm32_adc_irq_handler); |
| irq_set_handler_data(priv->irq, priv); |
| |
| return 0; |
| } |
| |
| static void stm32_adc_irq_remove(struct platform_device *pdev, |
| struct stm32_adc_priv *priv) |
| { |
| int hwirq; |
| |
| for (hwirq = 0; hwirq < STM32_ADC_MAX_ADCS; hwirq++) |
| irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq)); |
| irq_domain_remove(priv->domain); |
| irq_set_chained_handler(priv->irq, NULL); |
| } |
| |
| static int stm32_adc_probe(struct platform_device *pdev) |
| { |
| struct stm32_adc_priv *priv; |
| struct device *dev = &pdev->dev; |
| struct device_node *np = pdev->dev.of_node; |
| struct resource *res; |
| int ret; |
| |
| if (!pdev->dev.of_node) |
| return -ENODEV; |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->cfg = (const struct stm32_adc_priv_cfg *) |
| of_match_device(dev->driver->of_match_table, dev)->data; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| priv->common.base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(priv->common.base)) |
| return PTR_ERR(priv->common.base); |
| priv->common.phys_base = res->start; |
| |
| priv->vref = devm_regulator_get(&pdev->dev, "vref"); |
| if (IS_ERR(priv->vref)) { |
| ret = PTR_ERR(priv->vref); |
| dev_err(&pdev->dev, "vref get failed, %d\n", ret); |
| return ret; |
| } |
| |
| ret = regulator_enable(priv->vref); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "vref enable failed\n"); |
| return ret; |
| } |
| |
| ret = regulator_get_voltage(priv->vref); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "vref get voltage failed, %d\n", ret); |
| goto err_regulator_disable; |
| } |
| priv->common.vref_mv = ret / 1000; |
| dev_dbg(&pdev->dev, "vref+=%dmV\n", priv->common.vref_mv); |
| |
| priv->aclk = devm_clk_get(&pdev->dev, "adc"); |
| if (IS_ERR(priv->aclk)) { |
| ret = PTR_ERR(priv->aclk); |
| if (ret == -ENOENT) { |
| priv->aclk = NULL; |
| } else { |
| dev_err(&pdev->dev, "Can't get 'adc' clock\n"); |
| goto err_regulator_disable; |
| } |
| } |
| |
| if (priv->aclk) { |
| ret = clk_prepare_enable(priv->aclk); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "adc clk enable failed\n"); |
| goto err_regulator_disable; |
| } |
| } |
| |
| priv->bclk = devm_clk_get(&pdev->dev, "bus"); |
| if (IS_ERR(priv->bclk)) { |
| ret = PTR_ERR(priv->bclk); |
| if (ret == -ENOENT) { |
| priv->bclk = NULL; |
| } else { |
| dev_err(&pdev->dev, "Can't get 'bus' clock\n"); |
| goto err_aclk_disable; |
| } |
| } |
| |
| if (priv->bclk) { |
| ret = clk_prepare_enable(priv->bclk); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "adc clk enable failed\n"); |
| goto err_aclk_disable; |
| } |
| } |
| |
| ret = priv->cfg->clk_sel(pdev, priv); |
| if (ret < 0) |
| goto err_bclk_disable; |
| |
| ret = stm32_adc_irq_probe(pdev, priv); |
| if (ret < 0) |
| goto err_bclk_disable; |
| |
| platform_set_drvdata(pdev, &priv->common); |
| |
| ret = of_platform_populate(np, NULL, NULL, &pdev->dev); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to populate DT children\n"); |
| goto err_irq_remove; |
| } |
| |
| return 0; |
| |
| err_irq_remove: |
| stm32_adc_irq_remove(pdev, priv); |
| |
| err_bclk_disable: |
| if (priv->bclk) |
| clk_disable_unprepare(priv->bclk); |
| |
| err_aclk_disable: |
| if (priv->aclk) |
| clk_disable_unprepare(priv->aclk); |
| |
| err_regulator_disable: |
| regulator_disable(priv->vref); |
| |
| return ret; |
| } |
| |
| static int stm32_adc_remove(struct platform_device *pdev) |
| { |
| struct stm32_adc_common *common = platform_get_drvdata(pdev); |
| struct stm32_adc_priv *priv = to_stm32_adc_priv(common); |
| |
| of_platform_depopulate(&pdev->dev); |
| stm32_adc_irq_remove(pdev, priv); |
| if (priv->bclk) |
| clk_disable_unprepare(priv->bclk); |
| if (priv->aclk) |
| clk_disable_unprepare(priv->aclk); |
| regulator_disable(priv->vref); |
| |
| return 0; |
| } |
| |
| static const struct stm32_adc_priv_cfg stm32f4_adc_priv_cfg = { |
| .regs = &stm32f4_adc_common_regs, |
| .clk_sel = stm32f4_adc_clk_sel, |
| }; |
| |
| static const struct stm32_adc_priv_cfg stm32h7_adc_priv_cfg = { |
| .regs = &stm32h7_adc_common_regs, |
| .clk_sel = stm32h7_adc_clk_sel, |
| }; |
| |
| static const struct of_device_id stm32_adc_of_match[] = { |
| { |
| .compatible = "st,stm32f4-adc-core", |
| .data = (void *)&stm32f4_adc_priv_cfg |
| }, { |
| .compatible = "st,stm32h7-adc-core", |
| .data = (void *)&stm32h7_adc_priv_cfg |
| }, { |
| }, |
| }; |
| MODULE_DEVICE_TABLE(of, stm32_adc_of_match); |
| |
| static struct platform_driver stm32_adc_driver = { |
| .probe = stm32_adc_probe, |
| .remove = stm32_adc_remove, |
| .driver = { |
| .name = "stm32-adc-core", |
| .of_match_table = stm32_adc_of_match, |
| }, |
| }; |
| module_platform_driver(stm32_adc_driver); |
| |
| MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>"); |
| MODULE_DESCRIPTION("STMicroelectronics STM32 ADC core driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:stm32-adc-core"); |