|  | /* | 
|  | * vimc-scaler.c Virtual Media Controller Driver | 
|  | * | 
|  | * Copyright (C) 2015-2017 Helen Koike <helen.fornazier@gmail.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/component.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/vmalloc.h> | 
|  | #include <linux/v4l2-mediabus.h> | 
|  | #include <media/v4l2-subdev.h> | 
|  |  | 
|  | #include "vimc-common.h" | 
|  |  | 
|  | #define VIMC_SCA_DRV_NAME "vimc-scaler" | 
|  |  | 
|  | static unsigned int sca_mult = 3; | 
|  | module_param(sca_mult, uint, 0000); | 
|  | MODULE_PARM_DESC(sca_mult, " the image size multiplier"); | 
|  |  | 
|  | #define IS_SINK(pad)	(!pad) | 
|  | #define IS_SRC(pad)	(pad) | 
|  | #define MAX_ZOOM	8 | 
|  |  | 
|  | struct vimc_sca_device { | 
|  | struct vimc_ent_device ved; | 
|  | struct v4l2_subdev sd; | 
|  | struct device *dev; | 
|  | /* NOTE: the source fmt is the same as the sink | 
|  | * with the width and hight multiplied by mult | 
|  | */ | 
|  | struct v4l2_mbus_framefmt sink_fmt; | 
|  | /* Values calculated when the stream starts */ | 
|  | u8 *src_frame; | 
|  | unsigned int src_line_size; | 
|  | unsigned int bpp; | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_mbus_framefmt sink_fmt_default = { | 
|  | .width = 640, | 
|  | .height = 480, | 
|  | .code = MEDIA_BUS_FMT_RGB888_1X24, | 
|  | .field = V4L2_FIELD_NONE, | 
|  | .colorspace = V4L2_COLORSPACE_DEFAULT, | 
|  | }; | 
|  |  | 
|  | static int vimc_sca_init_cfg(struct v4l2_subdev *sd, | 
|  | struct v4l2_subdev_pad_config *cfg) | 
|  | { | 
|  | struct v4l2_mbus_framefmt *mf; | 
|  | unsigned int i; | 
|  |  | 
|  | mf = v4l2_subdev_get_try_format(sd, cfg, 0); | 
|  | *mf = sink_fmt_default; | 
|  |  | 
|  | for (i = 1; i < sd->entity.num_pads; i++) { | 
|  | mf = v4l2_subdev_get_try_format(sd, cfg, i); | 
|  | *mf = sink_fmt_default; | 
|  | mf->width = mf->width * sca_mult; | 
|  | mf->height = mf->height * sca_mult; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vimc_sca_enum_mbus_code(struct v4l2_subdev *sd, | 
|  | struct v4l2_subdev_pad_config *cfg, | 
|  | struct v4l2_subdev_mbus_code_enum *code) | 
|  | { | 
|  | const struct vimc_pix_map *vpix = vimc_pix_map_by_index(code->index); | 
|  |  | 
|  | /* We don't support bayer format */ | 
|  | if (!vpix || vpix->bayer) | 
|  | return -EINVAL; | 
|  |  | 
|  | code->code = vpix->code; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vimc_sca_enum_frame_size(struct v4l2_subdev *sd, | 
|  | struct v4l2_subdev_pad_config *cfg, | 
|  | struct v4l2_subdev_frame_size_enum *fse) | 
|  | { | 
|  | const struct vimc_pix_map *vpix; | 
|  |  | 
|  | if (fse->index) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Only accept code in the pix map table in non bayer format */ | 
|  | vpix = vimc_pix_map_by_code(fse->code); | 
|  | if (!vpix || vpix->bayer) | 
|  | return -EINVAL; | 
|  |  | 
|  | fse->min_width = VIMC_FRAME_MIN_WIDTH; | 
|  | fse->min_height = VIMC_FRAME_MIN_HEIGHT; | 
|  |  | 
|  | if (IS_SINK(fse->pad)) { | 
|  | fse->max_width = VIMC_FRAME_MAX_WIDTH; | 
|  | fse->max_height = VIMC_FRAME_MAX_HEIGHT; | 
|  | } else { | 
|  | fse->max_width = VIMC_FRAME_MAX_WIDTH * MAX_ZOOM; | 
|  | fse->max_height = VIMC_FRAME_MAX_HEIGHT * MAX_ZOOM; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vimc_sca_get_fmt(struct v4l2_subdev *sd, | 
|  | struct v4l2_subdev_pad_config *cfg, | 
|  | struct v4l2_subdev_format *format) | 
|  | { | 
|  | struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd); | 
|  |  | 
|  | /* Get the current sink format */ | 
|  | format->format = (format->which == V4L2_SUBDEV_FORMAT_TRY) ? | 
|  | *v4l2_subdev_get_try_format(sd, cfg, 0) : | 
|  | vsca->sink_fmt; | 
|  |  | 
|  | /* Scale the frame size for the source pad */ | 
|  | if (IS_SRC(format->pad)) { | 
|  | format->format.width = vsca->sink_fmt.width * sca_mult; | 
|  | format->format.height = vsca->sink_fmt.height * sca_mult; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void vimc_sca_adjust_sink_fmt(struct v4l2_mbus_framefmt *fmt) | 
|  | { | 
|  | const struct vimc_pix_map *vpix; | 
|  |  | 
|  | /* Only accept code in the pix map table in non bayer format */ | 
|  | vpix = vimc_pix_map_by_code(fmt->code); | 
|  | if (!vpix || vpix->bayer) | 
|  | fmt->code = sink_fmt_default.code; | 
|  |  | 
|  | fmt->width = clamp_t(u32, fmt->width, VIMC_FRAME_MIN_WIDTH, | 
|  | VIMC_FRAME_MAX_WIDTH) & ~1; | 
|  | fmt->height = clamp_t(u32, fmt->height, VIMC_FRAME_MIN_HEIGHT, | 
|  | VIMC_FRAME_MAX_HEIGHT) & ~1; | 
|  |  | 
|  | if (fmt->field == V4L2_FIELD_ANY) | 
|  | fmt->field = sink_fmt_default.field; | 
|  |  | 
|  | vimc_colorimetry_clamp(fmt); | 
|  | } | 
|  |  | 
|  | static int vimc_sca_set_fmt(struct v4l2_subdev *sd, | 
|  | struct v4l2_subdev_pad_config *cfg, | 
|  | struct v4l2_subdev_format *fmt) | 
|  | { | 
|  | struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd); | 
|  | struct v4l2_mbus_framefmt *sink_fmt; | 
|  |  | 
|  | if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { | 
|  | /* Do not change the format while stream is on */ | 
|  | if (vsca->src_frame) | 
|  | return -EBUSY; | 
|  |  | 
|  | sink_fmt = &vsca->sink_fmt; | 
|  | } else { | 
|  | sink_fmt = v4l2_subdev_get_try_format(sd, cfg, 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Do not change the format of the source pad, | 
|  | * it is propagated from the sink | 
|  | */ | 
|  | if (IS_SRC(fmt->pad)) { | 
|  | fmt->format = *sink_fmt; | 
|  | fmt->format.width = sink_fmt->width * sca_mult; | 
|  | fmt->format.height = sink_fmt->height * sca_mult; | 
|  | } else { | 
|  | /* Set the new format in the sink pad */ | 
|  | vimc_sca_adjust_sink_fmt(&fmt->format); | 
|  |  | 
|  | dev_dbg(vsca->dev, "%s: sink format update: " | 
|  | "old:%dx%d (0x%x, %d, %d, %d, %d) " | 
|  | "new:%dx%d (0x%x, %d, %d, %d, %d)\n", vsca->sd.name, | 
|  | /* old */ | 
|  | sink_fmt->width, sink_fmt->height, sink_fmt->code, | 
|  | sink_fmt->colorspace, sink_fmt->quantization, | 
|  | sink_fmt->xfer_func, sink_fmt->ycbcr_enc, | 
|  | /* new */ | 
|  | fmt->format.width, fmt->format.height, fmt->format.code, | 
|  | fmt->format.colorspace,	fmt->format.quantization, | 
|  | fmt->format.xfer_func, fmt->format.ycbcr_enc); | 
|  |  | 
|  | *sink_fmt = fmt->format; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct v4l2_subdev_pad_ops vimc_sca_pad_ops = { | 
|  | .init_cfg		= vimc_sca_init_cfg, | 
|  | .enum_mbus_code		= vimc_sca_enum_mbus_code, | 
|  | .enum_frame_size	= vimc_sca_enum_frame_size, | 
|  | .get_fmt		= vimc_sca_get_fmt, | 
|  | .set_fmt		= vimc_sca_set_fmt, | 
|  | }; | 
|  |  | 
|  | static int vimc_sca_s_stream(struct v4l2_subdev *sd, int enable) | 
|  | { | 
|  | struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd); | 
|  | int ret; | 
|  |  | 
|  | if (enable) { | 
|  | const struct vimc_pix_map *vpix; | 
|  | unsigned int frame_size; | 
|  |  | 
|  | if (vsca->src_frame) | 
|  | return 0; | 
|  |  | 
|  | /* Save the bytes per pixel of the sink */ | 
|  | vpix = vimc_pix_map_by_code(vsca->sink_fmt.code); | 
|  | vsca->bpp = vpix->bpp; | 
|  |  | 
|  | /* Calculate the width in bytes of the src frame */ | 
|  | vsca->src_line_size = vsca->sink_fmt.width * | 
|  | sca_mult * vsca->bpp; | 
|  |  | 
|  | /* Calculate the frame size of the source pad */ | 
|  | frame_size = vsca->src_line_size * vsca->sink_fmt.height * | 
|  | sca_mult; | 
|  |  | 
|  | /* Allocate the frame buffer. Use vmalloc to be able to | 
|  | * allocate a large amount of memory | 
|  | */ | 
|  | vsca->src_frame = vmalloc(frame_size); | 
|  | if (!vsca->src_frame) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* Turn the stream on in the subdevices directly connected */ | 
|  | ret = vimc_pipeline_s_stream(&vsca->sd.entity, 1); | 
|  | if (ret) { | 
|  | vfree(vsca->src_frame); | 
|  | vsca->src_frame = NULL; | 
|  | return ret; | 
|  | } | 
|  | } else { | 
|  | if (!vsca->src_frame) | 
|  | return 0; | 
|  |  | 
|  | /* Disable streaming from the pipe */ | 
|  | ret = vimc_pipeline_s_stream(&vsca->sd.entity, 0); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | vfree(vsca->src_frame); | 
|  | vsca->src_frame = NULL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct v4l2_subdev_video_ops vimc_sca_video_ops = { | 
|  | .s_stream = vimc_sca_s_stream, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_subdev_ops vimc_sca_ops = { | 
|  | .pad = &vimc_sca_pad_ops, | 
|  | .video = &vimc_sca_video_ops, | 
|  | }; | 
|  |  | 
|  | static void vimc_sca_fill_pix(u8 *const ptr, | 
|  | const u8 *const pixel, | 
|  | const unsigned int bpp) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | /* copy the pixel to the pointer */ | 
|  | for (i = 0; i < bpp; i++) | 
|  | ptr[i] = pixel[i]; | 
|  | } | 
|  |  | 
|  | static void vimc_sca_scale_pix(const struct vimc_sca_device *const vsca, | 
|  | const unsigned int lin, const unsigned int col, | 
|  | const u8 *const sink_frame) | 
|  | { | 
|  | unsigned int i, j, index; | 
|  | const u8 *pixel; | 
|  |  | 
|  | /* Point to the pixel value in position (lin, col) in the sink frame */ | 
|  | index = VIMC_FRAME_INDEX(lin, col, | 
|  | vsca->sink_fmt.width, | 
|  | vsca->bpp); | 
|  | pixel = &sink_frame[index]; | 
|  |  | 
|  | dev_dbg(vsca->dev, | 
|  | "sca: %s: --- scale_pix sink pos %dx%d, index %d ---\n", | 
|  | vsca->sd.name, lin, col, index); | 
|  |  | 
|  | /* point to the place we are going to put the first pixel | 
|  | * in the scaled src frame | 
|  | */ | 
|  | index = VIMC_FRAME_INDEX(lin * sca_mult, col * sca_mult, | 
|  | vsca->sink_fmt.width * sca_mult, vsca->bpp); | 
|  |  | 
|  | dev_dbg(vsca->dev, "sca: %s: scale_pix src pos %dx%d, index %d\n", | 
|  | vsca->sd.name, lin * sca_mult, col * sca_mult, index); | 
|  |  | 
|  | /* Repeat this pixel mult times */ | 
|  | for (i = 0; i < sca_mult; i++) { | 
|  | /* Iterate through each beginning of a | 
|  | * pixel repetition in a line | 
|  | */ | 
|  | for (j = 0; j < sca_mult * vsca->bpp; j += vsca->bpp) { | 
|  | dev_dbg(vsca->dev, | 
|  | "sca: %s: sca: scale_pix src pos %d\n", | 
|  | vsca->sd.name, index + j); | 
|  |  | 
|  | /* copy the pixel to the position index + j */ | 
|  | vimc_sca_fill_pix(&vsca->src_frame[index + j], | 
|  | pixel, vsca->bpp); | 
|  | } | 
|  |  | 
|  | /* move the index to the next line */ | 
|  | index += vsca->src_line_size; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void vimc_sca_fill_src_frame(const struct vimc_sca_device *const vsca, | 
|  | const u8 *const sink_frame) | 
|  | { | 
|  | unsigned int i, j; | 
|  |  | 
|  | /* Scale each pixel from the original sink frame */ | 
|  | /* TODO: implement scale down, only scale up is supported for now */ | 
|  | for (i = 0; i < vsca->sink_fmt.height; i++) | 
|  | for (j = 0; j < vsca->sink_fmt.width; j++) | 
|  | vimc_sca_scale_pix(vsca, i, j, sink_frame); | 
|  | } | 
|  |  | 
|  | static void vimc_sca_process_frame(struct vimc_ent_device *ved, | 
|  | struct media_pad *sink, | 
|  | const void *sink_frame) | 
|  | { | 
|  | struct vimc_sca_device *vsca = container_of(ved, struct vimc_sca_device, | 
|  | ved); | 
|  | unsigned int i; | 
|  |  | 
|  | /* If the stream in this node is not active, just return */ | 
|  | if (!vsca->src_frame) | 
|  | return; | 
|  |  | 
|  | vimc_sca_fill_src_frame(vsca, sink_frame); | 
|  |  | 
|  | /* Propagate the frame through all source pads */ | 
|  | for (i = 1; i < vsca->sd.entity.num_pads; i++) { | 
|  | struct media_pad *pad = &vsca->sd.entity.pads[i]; | 
|  |  | 
|  | vimc_propagate_frame(pad, vsca->src_frame); | 
|  | } | 
|  | }; | 
|  |  | 
|  | static void vimc_sca_comp_unbind(struct device *comp, struct device *master, | 
|  | void *master_data) | 
|  | { | 
|  | struct vimc_ent_device *ved = dev_get_drvdata(comp); | 
|  | struct vimc_sca_device *vsca = container_of(ved, struct vimc_sca_device, | 
|  | ved); | 
|  |  | 
|  | vimc_ent_sd_unregister(ved, &vsca->sd); | 
|  | kfree(vsca); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int vimc_sca_comp_bind(struct device *comp, struct device *master, | 
|  | void *master_data) | 
|  | { | 
|  | struct v4l2_device *v4l2_dev = master_data; | 
|  | struct vimc_platform_data *pdata = comp->platform_data; | 
|  | struct vimc_sca_device *vsca; | 
|  | int ret; | 
|  |  | 
|  | /* Allocate the vsca struct */ | 
|  | vsca = kzalloc(sizeof(*vsca), GFP_KERNEL); | 
|  | if (!vsca) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* Initialize ved and sd */ | 
|  | ret = vimc_ent_sd_register(&vsca->ved, &vsca->sd, v4l2_dev, | 
|  | pdata->entity_name, | 
|  | MEDIA_ENT_F_ATV_DECODER, 2, | 
|  | (const unsigned long[2]) {MEDIA_PAD_FL_SINK, | 
|  | MEDIA_PAD_FL_SOURCE}, | 
|  | &vimc_sca_ops); | 
|  | if (ret) { | 
|  | kfree(vsca); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | vsca->ved.process_frame = vimc_sca_process_frame; | 
|  | dev_set_drvdata(comp, &vsca->ved); | 
|  | vsca->dev = comp; | 
|  |  | 
|  | /* Initialize the frame format */ | 
|  | vsca->sink_fmt = sink_fmt_default; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct component_ops vimc_sca_comp_ops = { | 
|  | .bind = vimc_sca_comp_bind, | 
|  | .unbind = vimc_sca_comp_unbind, | 
|  | }; | 
|  |  | 
|  | static int vimc_sca_probe(struct platform_device *pdev) | 
|  | { | 
|  | return component_add(&pdev->dev, &vimc_sca_comp_ops); | 
|  | } | 
|  |  | 
|  | static int vimc_sca_remove(struct platform_device *pdev) | 
|  | { | 
|  | component_del(&pdev->dev, &vimc_sca_comp_ops); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct platform_device_id vimc_sca_driver_ids[] = { | 
|  | { | 
|  | .name           = VIMC_SCA_DRV_NAME, | 
|  | }, | 
|  | { } | 
|  | }; | 
|  |  | 
|  | static struct platform_driver vimc_sca_pdrv = { | 
|  | .probe		= vimc_sca_probe, | 
|  | .remove		= vimc_sca_remove, | 
|  | .id_table	= vimc_sca_driver_ids, | 
|  | .driver		= { | 
|  | .name	= VIMC_SCA_DRV_NAME, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(vimc_sca_pdrv); | 
|  |  | 
|  | MODULE_DEVICE_TABLE(platform, vimc_sca_driver_ids); | 
|  |  | 
|  | MODULE_DESCRIPTION("Virtual Media Controller Driver (VIMC) Scaler"); | 
|  | MODULE_AUTHOR("Helen Mae Koike Fornazier <helen.fornazier@gmail.com>"); | 
|  | MODULE_LICENSE("GPL"); |