| /* | 
 |  * FSI core driver | 
 |  * | 
 |  * Copyright (C) IBM Corporation 2016 | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  */ | 
 |  | 
 | #include <linux/crc4.h> | 
 | #include <linux/device.h> | 
 | #include <linux/fsi.h> | 
 | #include <linux/idr.h> | 
 | #include <linux/module.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/bitops.h> | 
 |  | 
 | #include "fsi-master.h" | 
 |  | 
 | #define CREATE_TRACE_POINTS | 
 | #include <trace/events/fsi.h> | 
 |  | 
 | #define FSI_SLAVE_CONF_NEXT_MASK	GENMASK(31, 31) | 
 | #define FSI_SLAVE_CONF_SLOTS_MASK	GENMASK(23, 16) | 
 | #define FSI_SLAVE_CONF_SLOTS_SHIFT	16 | 
 | #define FSI_SLAVE_CONF_VERSION_MASK	GENMASK(15, 12) | 
 | #define FSI_SLAVE_CONF_VERSION_SHIFT	12 | 
 | #define FSI_SLAVE_CONF_TYPE_MASK	GENMASK(11, 4) | 
 | #define FSI_SLAVE_CONF_TYPE_SHIFT	4 | 
 | #define FSI_SLAVE_CONF_CRC_SHIFT	4 | 
 | #define FSI_SLAVE_CONF_CRC_MASK		GENMASK(3, 0) | 
 | #define FSI_SLAVE_CONF_DATA_BITS	28 | 
 |  | 
 | #define FSI_PEEK_BASE			0x410 | 
 |  | 
 | static const int engine_page_size = 0x400; | 
 |  | 
 | #define FSI_SLAVE_BASE			0x800 | 
 |  | 
 | /* | 
 |  * FSI slave engine control register offsets | 
 |  */ | 
 | #define FSI_SMODE		0x0	/* R/W: Mode register */ | 
 | #define FSI_SISC		0x8	/* R/W: Interrupt condition */ | 
 | #define FSI_SSTAT		0x14	/* R  : Slave status */ | 
 | #define FSI_LLMODE		0x100	/* R/W: Link layer mode register */ | 
 |  | 
 | /* | 
 |  * SMODE fields | 
 |  */ | 
 | #define FSI_SMODE_WSC		0x80000000	/* Warm start done */ | 
 | #define FSI_SMODE_ECRC		0x20000000	/* Hw CRC check */ | 
 | #define FSI_SMODE_SID_SHIFT	24		/* ID shift */ | 
 | #define FSI_SMODE_SID_MASK	3		/* ID Mask */ | 
 | #define FSI_SMODE_ED_SHIFT	20		/* Echo delay shift */ | 
 | #define FSI_SMODE_ED_MASK	0xf		/* Echo delay mask */ | 
 | #define FSI_SMODE_SD_SHIFT	16		/* Send delay shift */ | 
 | #define FSI_SMODE_SD_MASK	0xf		/* Send delay mask */ | 
 | #define FSI_SMODE_LBCRR_SHIFT	8		/* Clk ratio shift */ | 
 | #define FSI_SMODE_LBCRR_MASK	0xf		/* Clk ratio mask */ | 
 |  | 
 | /* | 
 |  * LLMODE fields | 
 |  */ | 
 | #define FSI_LLMODE_ASYNC	0x1 | 
 |  | 
 | #define FSI_SLAVE_SIZE_23b		0x800000 | 
 |  | 
 | static DEFINE_IDA(master_ida); | 
 |  | 
 | struct fsi_slave { | 
 | 	struct device		dev; | 
 | 	struct fsi_master	*master; | 
 | 	int			id; | 
 | 	int			link; | 
 | 	uint32_t		size;	/* size of slave address space */ | 
 | }; | 
 |  | 
 | #define to_fsi_master(d) container_of(d, struct fsi_master, dev) | 
 | #define to_fsi_slave(d) container_of(d, struct fsi_slave, dev) | 
 |  | 
 | static const int slave_retries = 2; | 
 | static int discard_errors; | 
 |  | 
 | static int fsi_master_read(struct fsi_master *master, int link, | 
 | 		uint8_t slave_id, uint32_t addr, void *val, size_t size); | 
 | static int fsi_master_write(struct fsi_master *master, int link, | 
 | 		uint8_t slave_id, uint32_t addr, const void *val, size_t size); | 
 | static int fsi_master_break(struct fsi_master *master, int link); | 
 |  | 
 | /* | 
 |  * fsi_device_read() / fsi_device_write() / fsi_device_peek() | 
 |  * | 
 |  * FSI endpoint-device support | 
 |  * | 
 |  * Read / write / peek accessors for a client | 
 |  * | 
 |  * Parameters: | 
 |  * dev:  Structure passed to FSI client device drivers on probe(). | 
 |  * addr: FSI address of given device.  Client should pass in its base address | 
 |  *       plus desired offset to access its register space. | 
 |  * val:  For read/peek this is the value read at the specified address. For | 
 |  *       write this is value to write to the specified address. | 
 |  *       The data in val must be FSI bus endian (big endian). | 
 |  * size: Size in bytes of the operation.  Sizes supported are 1, 2 and 4 bytes. | 
 |  *       Addresses must be aligned on size boundaries or an error will result. | 
 |  */ | 
 | int fsi_device_read(struct fsi_device *dev, uint32_t addr, void *val, | 
 | 		size_t size) | 
 | { | 
 | 	if (addr > dev->size || size > dev->size || addr > dev->size - size) | 
 | 		return -EINVAL; | 
 |  | 
 | 	return fsi_slave_read(dev->slave, dev->addr + addr, val, size); | 
 | } | 
 | EXPORT_SYMBOL_GPL(fsi_device_read); | 
 |  | 
 | int fsi_device_write(struct fsi_device *dev, uint32_t addr, const void *val, | 
 | 		size_t size) | 
 | { | 
 | 	if (addr > dev->size || size > dev->size || addr > dev->size - size) | 
 | 		return -EINVAL; | 
 |  | 
 | 	return fsi_slave_write(dev->slave, dev->addr + addr, val, size); | 
 | } | 
 | EXPORT_SYMBOL_GPL(fsi_device_write); | 
 |  | 
 | int fsi_device_peek(struct fsi_device *dev, void *val) | 
 | { | 
 | 	uint32_t addr = FSI_PEEK_BASE + ((dev->unit - 2) * sizeof(uint32_t)); | 
 |  | 
 | 	return fsi_slave_read(dev->slave, addr, val, sizeof(uint32_t)); | 
 | } | 
 |  | 
 | static void fsi_device_release(struct device *_device) | 
 | { | 
 | 	struct fsi_device *device = to_fsi_dev(_device); | 
 |  | 
 | 	kfree(device); | 
 | } | 
 |  | 
 | static struct fsi_device *fsi_create_device(struct fsi_slave *slave) | 
 | { | 
 | 	struct fsi_device *dev; | 
 |  | 
 | 	dev = kzalloc(sizeof(*dev), GFP_KERNEL); | 
 | 	if (!dev) | 
 | 		return NULL; | 
 |  | 
 | 	dev->dev.parent = &slave->dev; | 
 | 	dev->dev.bus = &fsi_bus_type; | 
 | 	dev->dev.release = fsi_device_release; | 
 |  | 
 | 	return dev; | 
 | } | 
 |  | 
 | /* FSI slave support */ | 
 | static int fsi_slave_calc_addr(struct fsi_slave *slave, uint32_t *addrp, | 
 | 		uint8_t *idp) | 
 | { | 
 | 	uint32_t addr = *addrp; | 
 | 	uint8_t id = *idp; | 
 |  | 
 | 	if (addr > slave->size) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* For 23 bit addressing, we encode the extra two bits in the slave | 
 | 	 * id (and the slave's actual ID needs to be 0). | 
 | 	 */ | 
 | 	if (addr > 0x1fffff) { | 
 | 		if (slave->id != 0) | 
 | 			return -EINVAL; | 
 | 		id = (addr >> 21) & 0x3; | 
 | 		addr &= 0x1fffff; | 
 | 	} | 
 |  | 
 | 	*addrp = addr; | 
 | 	*idp = id; | 
 | 	return 0; | 
 | } | 
 |  | 
 | int fsi_slave_report_and_clear_errors(struct fsi_slave *slave) | 
 | { | 
 | 	struct fsi_master *master = slave->master; | 
 | 	uint32_t irq, stat; | 
 | 	int rc, link; | 
 | 	uint8_t id; | 
 |  | 
 | 	link = slave->link; | 
 | 	id = slave->id; | 
 |  | 
 | 	rc = fsi_master_read(master, link, id, FSI_SLAVE_BASE + FSI_SISC, | 
 | 			&irq, sizeof(irq)); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	rc =  fsi_master_read(master, link, id, FSI_SLAVE_BASE + FSI_SSTAT, | 
 | 			&stat, sizeof(stat)); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	dev_info(&slave->dev, "status: 0x%08x, sisc: 0x%08x\n", | 
 | 			be32_to_cpu(stat), be32_to_cpu(irq)); | 
 |  | 
 | 	/* clear interrupts */ | 
 | 	return fsi_master_write(master, link, id, FSI_SLAVE_BASE + FSI_SISC, | 
 | 			&irq, sizeof(irq)); | 
 | } | 
 |  | 
 | static int fsi_slave_set_smode(struct fsi_master *master, int link, int id); | 
 |  | 
 | int fsi_slave_handle_error(struct fsi_slave *slave, bool write, uint32_t addr, | 
 | 		size_t size) | 
 | { | 
 | 	struct fsi_master *master = slave->master; | 
 | 	int rc, link; | 
 | 	uint32_t reg; | 
 | 	uint8_t id; | 
 |  | 
 | 	if (discard_errors) | 
 | 		return -1; | 
 |  | 
 | 	link = slave->link; | 
 | 	id = slave->id; | 
 |  | 
 | 	dev_dbg(&slave->dev, "handling error on %s to 0x%08x[%zd]", | 
 | 			write ? "write" : "read", addr, size); | 
 |  | 
 | 	/* try a simple clear of error conditions, which may fail if we've lost | 
 | 	 * communication with the slave | 
 | 	 */ | 
 | 	rc = fsi_slave_report_and_clear_errors(slave); | 
 | 	if (!rc) | 
 | 		return 0; | 
 |  | 
 | 	/* send a TERM and retry */ | 
 | 	if (master->term) { | 
 | 		rc = master->term(master, link, id); | 
 | 		if (!rc) { | 
 | 			rc = fsi_master_read(master, link, id, 0, | 
 | 					®, sizeof(reg)); | 
 | 			if (!rc) | 
 | 				rc = fsi_slave_report_and_clear_errors(slave); | 
 | 			if (!rc) | 
 | 				return 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* getting serious, reset the slave via BREAK */ | 
 | 	rc = fsi_master_break(master, link); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	rc = fsi_slave_set_smode(master, link, id); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	return fsi_slave_report_and_clear_errors(slave); | 
 | } | 
 |  | 
 | int fsi_slave_read(struct fsi_slave *slave, uint32_t addr, | 
 | 			void *val, size_t size) | 
 | { | 
 | 	uint8_t id = slave->id; | 
 | 	int rc, err_rc, i; | 
 |  | 
 | 	rc = fsi_slave_calc_addr(slave, &addr, &id); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	for (i = 0; i < slave_retries; i++) { | 
 | 		rc = fsi_master_read(slave->master, slave->link, | 
 | 				id, addr, val, size); | 
 | 		if (!rc) | 
 | 			break; | 
 |  | 
 | 		err_rc = fsi_slave_handle_error(slave, false, addr, size); | 
 | 		if (err_rc) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	return rc; | 
 | } | 
 | EXPORT_SYMBOL_GPL(fsi_slave_read); | 
 |  | 
 | int fsi_slave_write(struct fsi_slave *slave, uint32_t addr, | 
 | 			const void *val, size_t size) | 
 | { | 
 | 	uint8_t id = slave->id; | 
 | 	int rc, err_rc, i; | 
 |  | 
 | 	rc = fsi_slave_calc_addr(slave, &addr, &id); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	for (i = 0; i < slave_retries; i++) { | 
 | 		rc = fsi_master_write(slave->master, slave->link, | 
 | 				id, addr, val, size); | 
 | 		if (!rc) | 
 | 			break; | 
 |  | 
 | 		err_rc = fsi_slave_handle_error(slave, true, addr, size); | 
 | 		if (err_rc) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	return rc; | 
 | } | 
 | EXPORT_SYMBOL_GPL(fsi_slave_write); | 
 |  | 
 | extern int fsi_slave_claim_range(struct fsi_slave *slave, | 
 | 		uint32_t addr, uint32_t size) | 
 | { | 
 | 	if (addr + size < addr) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (addr + size > slave->size) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* todo: check for overlapping claims */ | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(fsi_slave_claim_range); | 
 |  | 
 | extern void fsi_slave_release_range(struct fsi_slave *slave, | 
 | 		uint32_t addr, uint32_t size) | 
 | { | 
 | } | 
 | EXPORT_SYMBOL_GPL(fsi_slave_release_range); | 
 |  | 
 | static int fsi_slave_scan(struct fsi_slave *slave) | 
 | { | 
 | 	uint32_t engine_addr; | 
 | 	uint32_t conf; | 
 | 	int rc, i; | 
 |  | 
 | 	/* | 
 | 	 * scan engines | 
 | 	 * | 
 | 	 * We keep the peek mode and slave engines for the core; so start | 
 | 	 * at the third slot in the configuration table. We also need to | 
 | 	 * skip the chip ID entry at the start of the address space. | 
 | 	 */ | 
 | 	engine_addr = engine_page_size * 3; | 
 | 	for (i = 2; i < engine_page_size / sizeof(uint32_t); i++) { | 
 | 		uint8_t slots, version, type, crc; | 
 | 		struct fsi_device *dev; | 
 |  | 
 | 		rc = fsi_slave_read(slave, (i + 1) * sizeof(conf), | 
 | 				&conf, sizeof(conf)); | 
 | 		if (rc) { | 
 | 			dev_warn(&slave->dev, | 
 | 				"error reading slave registers\n"); | 
 | 			return -1; | 
 | 		} | 
 | 		conf = be32_to_cpu(conf); | 
 |  | 
 | 		crc = crc4(0, conf, 32); | 
 | 		if (crc) { | 
 | 			dev_warn(&slave->dev, | 
 | 				"crc error in slave register at 0x%04x\n", | 
 | 				i); | 
 | 			return -1; | 
 | 		} | 
 |  | 
 | 		slots = (conf & FSI_SLAVE_CONF_SLOTS_MASK) | 
 | 			>> FSI_SLAVE_CONF_SLOTS_SHIFT; | 
 | 		version = (conf & FSI_SLAVE_CONF_VERSION_MASK) | 
 | 			>> FSI_SLAVE_CONF_VERSION_SHIFT; | 
 | 		type = (conf & FSI_SLAVE_CONF_TYPE_MASK) | 
 | 			>> FSI_SLAVE_CONF_TYPE_SHIFT; | 
 |  | 
 | 		/* | 
 | 		 * Unused address areas are marked by a zero type value; this | 
 | 		 * skips the defined address areas | 
 | 		 */ | 
 | 		if (type != 0 && slots != 0) { | 
 |  | 
 | 			/* create device */ | 
 | 			dev = fsi_create_device(slave); | 
 | 			if (!dev) | 
 | 				return -ENOMEM; | 
 |  | 
 | 			dev->slave = slave; | 
 | 			dev->engine_type = type; | 
 | 			dev->version = version; | 
 | 			dev->unit = i; | 
 | 			dev->addr = engine_addr; | 
 | 			dev->size = slots * engine_page_size; | 
 |  | 
 | 			dev_dbg(&slave->dev, | 
 | 			"engine[%i]: type %x, version %x, addr %x size %x\n", | 
 | 					dev->unit, dev->engine_type, version, | 
 | 					dev->addr, dev->size); | 
 |  | 
 | 			dev_set_name(&dev->dev, "%02x:%02x:%02x:%02x", | 
 | 					slave->master->idx, slave->link, | 
 | 					slave->id, i - 2); | 
 |  | 
 | 			rc = device_register(&dev->dev); | 
 | 			if (rc) { | 
 | 				dev_warn(&slave->dev, "add failed: %d\n", rc); | 
 | 				put_device(&dev->dev); | 
 | 			} | 
 | 		} | 
 |  | 
 | 		engine_addr += slots * engine_page_size; | 
 |  | 
 | 		if (!(conf & FSI_SLAVE_CONF_NEXT_MASK)) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static ssize_t fsi_slave_sysfs_raw_read(struct file *file, | 
 | 		struct kobject *kobj, struct bin_attribute *attr, char *buf, | 
 | 		loff_t off, size_t count) | 
 | { | 
 | 	struct fsi_slave *slave = to_fsi_slave(kobj_to_dev(kobj)); | 
 | 	size_t total_len, read_len; | 
 | 	int rc; | 
 |  | 
 | 	if (off < 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (off > 0xffffffff || count > 0xffffffff || off + count > 0xffffffff) | 
 | 		return -EINVAL; | 
 |  | 
 | 	for (total_len = 0; total_len < count; total_len += read_len) { | 
 | 		read_len = min_t(size_t, count, 4); | 
 | 		read_len -= off & 0x3; | 
 |  | 
 | 		rc = fsi_slave_read(slave, off, buf + total_len, read_len); | 
 | 		if (rc) | 
 | 			return rc; | 
 |  | 
 | 		off += read_len; | 
 | 	} | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t fsi_slave_sysfs_raw_write(struct file *file, | 
 | 		struct kobject *kobj, struct bin_attribute *attr, | 
 | 		char *buf, loff_t off, size_t count) | 
 | { | 
 | 	struct fsi_slave *slave = to_fsi_slave(kobj_to_dev(kobj)); | 
 | 	size_t total_len, write_len; | 
 | 	int rc; | 
 |  | 
 | 	if (off < 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (off > 0xffffffff || count > 0xffffffff || off + count > 0xffffffff) | 
 | 		return -EINVAL; | 
 |  | 
 | 	for (total_len = 0; total_len < count; total_len += write_len) { | 
 | 		write_len = min_t(size_t, count, 4); | 
 | 		write_len -= off & 0x3; | 
 |  | 
 | 		rc = fsi_slave_write(slave, off, buf + total_len, write_len); | 
 | 		if (rc) | 
 | 			return rc; | 
 |  | 
 | 		off += write_len; | 
 | 	} | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static struct bin_attribute fsi_slave_raw_attr = { | 
 | 	.attr = { | 
 | 		.name = "raw", | 
 | 		.mode = 0600, | 
 | 	}, | 
 | 	.size = 0, | 
 | 	.read = fsi_slave_sysfs_raw_read, | 
 | 	.write = fsi_slave_sysfs_raw_write, | 
 | }; | 
 |  | 
 | static ssize_t fsi_slave_sysfs_term_write(struct file *file, | 
 | 		struct kobject *kobj, struct bin_attribute *attr, | 
 | 		char *buf, loff_t off, size_t count) | 
 | { | 
 | 	struct fsi_slave *slave = to_fsi_slave(kobj_to_dev(kobj)); | 
 | 	struct fsi_master *master = slave->master; | 
 |  | 
 | 	if (!master->term) | 
 | 		return -ENODEV; | 
 |  | 
 | 	master->term(master, slave->link, slave->id); | 
 | 	return count; | 
 | } | 
 |  | 
 | static struct bin_attribute fsi_slave_term_attr = { | 
 | 	.attr = { | 
 | 		.name = "term", | 
 | 		.mode = 0200, | 
 | 	}, | 
 | 	.size = 0, | 
 | 	.write = fsi_slave_sysfs_term_write, | 
 | }; | 
 |  | 
 | /* Encode slave local bus echo delay */ | 
 | static inline uint32_t fsi_smode_echodly(int x) | 
 | { | 
 | 	return (x & FSI_SMODE_ED_MASK) << FSI_SMODE_ED_SHIFT; | 
 | } | 
 |  | 
 | /* Encode slave local bus send delay */ | 
 | static inline uint32_t fsi_smode_senddly(int x) | 
 | { | 
 | 	return (x & FSI_SMODE_SD_MASK) << FSI_SMODE_SD_SHIFT; | 
 | } | 
 |  | 
 | /* Encode slave local bus clock rate ratio */ | 
 | static inline uint32_t fsi_smode_lbcrr(int x) | 
 | { | 
 | 	return (x & FSI_SMODE_LBCRR_MASK) << FSI_SMODE_LBCRR_SHIFT; | 
 | } | 
 |  | 
 | /* Encode slave ID */ | 
 | static inline uint32_t fsi_smode_sid(int x) | 
 | { | 
 | 	return (x & FSI_SMODE_SID_MASK) << FSI_SMODE_SID_SHIFT; | 
 | } | 
 |  | 
 | static uint32_t fsi_slave_smode(int id) | 
 | { | 
 | 	return FSI_SMODE_WSC | FSI_SMODE_ECRC | 
 | 		| fsi_smode_sid(id) | 
 | 		| fsi_smode_echodly(0xf) | fsi_smode_senddly(0xf) | 
 | 		| fsi_smode_lbcrr(0x8); | 
 | } | 
 |  | 
 | static int fsi_slave_set_smode(struct fsi_master *master, int link, int id) | 
 | { | 
 | 	uint32_t smode; | 
 |  | 
 | 	/* set our smode register with the slave ID field to 0; this enables | 
 | 	 * extended slave addressing | 
 | 	 */ | 
 | 	smode = fsi_slave_smode(id); | 
 | 	smode = cpu_to_be32(smode); | 
 |  | 
 | 	return fsi_master_write(master, link, id, FSI_SLAVE_BASE + FSI_SMODE, | 
 | 			&smode, sizeof(smode)); | 
 | } | 
 |  | 
 | static void fsi_slave_release(struct device *dev) | 
 | { | 
 | 	struct fsi_slave *slave = to_fsi_slave(dev); | 
 |  | 
 | 	kfree(slave); | 
 | } | 
 |  | 
 | static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id) | 
 | { | 
 | 	uint32_t chip_id, llmode; | 
 | 	struct fsi_slave *slave; | 
 | 	uint8_t crc; | 
 | 	int rc; | 
 |  | 
 | 	/* Currently, we only support single slaves on a link, and use the | 
 | 	 * full 23-bit address range | 
 | 	 */ | 
 | 	if (id != 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	rc = fsi_master_read(master, link, id, 0, &chip_id, sizeof(chip_id)); | 
 | 	if (rc) { | 
 | 		dev_dbg(&master->dev, "can't read slave %02x:%02x %d\n", | 
 | 				link, id, rc); | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	chip_id = be32_to_cpu(chip_id); | 
 |  | 
 | 	crc = crc4(0, chip_id, 32); | 
 | 	if (crc) { | 
 | 		dev_warn(&master->dev, "slave %02x:%02x invalid chip id CRC!\n", | 
 | 				link, id); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	dev_info(&master->dev, "fsi: found chip %08x at %02x:%02x:%02x\n", | 
 | 			chip_id, master->idx, link, id); | 
 |  | 
 | 	rc = fsi_slave_set_smode(master, link, id); | 
 | 	if (rc) { | 
 | 		dev_warn(&master->dev, | 
 | 				"can't set smode on slave:%02x:%02x %d\n", | 
 | 				link, id, rc); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	/* If we're behind a master that doesn't provide a self-running bus | 
 | 	 * clock, put the slave into async mode | 
 | 	 */ | 
 | 	if (master->flags & FSI_MASTER_FLAG_SWCLOCK) { | 
 | 		llmode = cpu_to_be32(FSI_LLMODE_ASYNC); | 
 | 		rc = fsi_master_write(master, link, id, | 
 | 				FSI_SLAVE_BASE + FSI_LLMODE, | 
 | 				&llmode, sizeof(llmode)); | 
 | 		if (rc) | 
 | 			dev_warn(&master->dev, | 
 | 				"can't set llmode on slave:%02x:%02x %d\n", | 
 | 				link, id, rc); | 
 | 	} | 
 |  | 
 | 	/* We can communicate with a slave; create the slave device and | 
 | 	 * register. | 
 | 	 */ | 
 | 	slave = kzalloc(sizeof(*slave), GFP_KERNEL); | 
 | 	if (!slave) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	slave->master = master; | 
 | 	slave->dev.parent = &master->dev; | 
 | 	slave->dev.release = fsi_slave_release; | 
 | 	slave->link = link; | 
 | 	slave->id = id; | 
 | 	slave->size = FSI_SLAVE_SIZE_23b; | 
 |  | 
 | 	dev_set_name(&slave->dev, "slave@%02x:%02x", link, id); | 
 | 	rc = device_register(&slave->dev); | 
 | 	if (rc < 0) { | 
 | 		dev_warn(&master->dev, "failed to create slave device: %d\n", | 
 | 				rc); | 
 | 		put_device(&slave->dev); | 
 | 		return rc; | 
 | 	} | 
 |  | 
 | 	rc = device_create_bin_file(&slave->dev, &fsi_slave_raw_attr); | 
 | 	if (rc) | 
 | 		dev_warn(&slave->dev, "failed to create raw attr: %d\n", rc); | 
 |  | 
 | 	rc = device_create_bin_file(&slave->dev, &fsi_slave_term_attr); | 
 | 	if (rc) | 
 | 		dev_warn(&slave->dev, "failed to create term attr: %d\n", rc); | 
 |  | 
 | 	rc = fsi_slave_scan(slave); | 
 | 	if (rc) | 
 | 		dev_dbg(&master->dev, "failed during slave scan with: %d\n", | 
 | 				rc); | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | /* FSI master support */ | 
 | static int fsi_check_access(uint32_t addr, size_t size) | 
 | { | 
 | 	if (size != 1 && size != 2 && size != 4) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if ((addr & 0x3) != (size & 0x3)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int fsi_master_read(struct fsi_master *master, int link, | 
 | 		uint8_t slave_id, uint32_t addr, void *val, size_t size) | 
 | { | 
 | 	int rc; | 
 |  | 
 | 	trace_fsi_master_read(master, link, slave_id, addr, size); | 
 |  | 
 | 	rc = fsi_check_access(addr, size); | 
 | 	if (!rc) | 
 | 		rc = master->read(master, link, slave_id, addr, val, size); | 
 |  | 
 | 	trace_fsi_master_rw_result(master, link, slave_id, addr, size, | 
 | 			false, val, rc); | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int fsi_master_write(struct fsi_master *master, int link, | 
 | 		uint8_t slave_id, uint32_t addr, const void *val, size_t size) | 
 | { | 
 | 	int rc; | 
 |  | 
 | 	trace_fsi_master_write(master, link, slave_id, addr, size, val); | 
 |  | 
 | 	rc = fsi_check_access(addr, size); | 
 | 	if (!rc) | 
 | 		rc = master->write(master, link, slave_id, addr, val, size); | 
 |  | 
 | 	trace_fsi_master_rw_result(master, link, slave_id, addr, size, | 
 | 			true, val, rc); | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int fsi_master_link_enable(struct fsi_master *master, int link) | 
 | { | 
 | 	if (master->link_enable) | 
 | 		return master->link_enable(master, link); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Issue a break command on this link | 
 |  */ | 
 | static int fsi_master_break(struct fsi_master *master, int link) | 
 | { | 
 | 	trace_fsi_master_break(master, link); | 
 |  | 
 | 	if (master->send_break) | 
 | 		return master->send_break(master, link); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int fsi_master_scan(struct fsi_master *master) | 
 | { | 
 | 	int link, rc; | 
 |  | 
 | 	for (link = 0; link < master->n_links; link++) { | 
 | 		rc = fsi_master_link_enable(master, link); | 
 | 		if (rc) { | 
 | 			dev_dbg(&master->dev, | 
 | 				"enable link %d failed: %d\n", link, rc); | 
 | 			continue; | 
 | 		} | 
 | 		rc = fsi_master_break(master, link); | 
 | 		if (rc) { | 
 | 			dev_dbg(&master->dev, | 
 | 				"break to link %d failed: %d\n", link, rc); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		fsi_slave_init(master, link, 0); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int fsi_slave_remove_device(struct device *dev, void *arg) | 
 | { | 
 | 	device_unregister(dev); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int fsi_master_remove_slave(struct device *dev, void *arg) | 
 | { | 
 | 	device_for_each_child(dev, NULL, fsi_slave_remove_device); | 
 | 	device_unregister(dev); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void fsi_master_unscan(struct fsi_master *master) | 
 | { | 
 | 	device_for_each_child(&master->dev, NULL, fsi_master_remove_slave); | 
 | } | 
 |  | 
 | static ssize_t master_rescan_store(struct device *dev, | 
 | 		struct device_attribute *attr, const char *buf, size_t count) | 
 | { | 
 | 	struct fsi_master *master = to_fsi_master(dev); | 
 | 	int rc; | 
 |  | 
 | 	fsi_master_unscan(master); | 
 | 	rc = fsi_master_scan(master); | 
 | 	if (rc < 0) | 
 | 		return rc; | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static DEVICE_ATTR(rescan, 0200, NULL, master_rescan_store); | 
 |  | 
 | static ssize_t master_break_store(struct device *dev, | 
 | 		struct device_attribute *attr, const char *buf, size_t count) | 
 | { | 
 | 	struct fsi_master *master = to_fsi_master(dev); | 
 |  | 
 | 	fsi_master_break(master, 0); | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static DEVICE_ATTR(break, 0200, NULL, master_break_store); | 
 |  | 
 | int fsi_master_register(struct fsi_master *master) | 
 | { | 
 | 	int rc; | 
 |  | 
 | 	if (!master) | 
 | 		return -EINVAL; | 
 |  | 
 | 	master->idx = ida_simple_get(&master_ida, 0, INT_MAX, GFP_KERNEL); | 
 | 	dev_set_name(&master->dev, "fsi%d", master->idx); | 
 |  | 
 | 	rc = device_register(&master->dev); | 
 | 	if (rc) { | 
 | 		ida_simple_remove(&master_ida, master->idx); | 
 | 		return rc; | 
 | 	} | 
 |  | 
 | 	rc = device_create_file(&master->dev, &dev_attr_rescan); | 
 | 	if (rc) { | 
 | 		device_unregister(&master->dev); | 
 | 		ida_simple_remove(&master_ida, master->idx); | 
 | 		return rc; | 
 | 	} | 
 |  | 
 | 	rc = device_create_file(&master->dev, &dev_attr_break); | 
 | 	if (rc) { | 
 | 		device_unregister(&master->dev); | 
 | 		ida_simple_remove(&master_ida, master->idx); | 
 | 		return rc; | 
 | 	} | 
 |  | 
 | 	fsi_master_scan(master); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(fsi_master_register); | 
 |  | 
 | void fsi_master_unregister(struct fsi_master *master) | 
 | { | 
 | 	if (master->idx >= 0) { | 
 | 		ida_simple_remove(&master_ida, master->idx); | 
 | 		master->idx = -1; | 
 | 	} | 
 |  | 
 | 	fsi_master_unscan(master); | 
 | 	device_unregister(&master->dev); | 
 | } | 
 | EXPORT_SYMBOL_GPL(fsi_master_unregister); | 
 |  | 
 | /* FSI core & Linux bus type definitions */ | 
 |  | 
 | static int fsi_bus_match(struct device *dev, struct device_driver *drv) | 
 | { | 
 | 	struct fsi_device *fsi_dev = to_fsi_dev(dev); | 
 | 	struct fsi_driver *fsi_drv = to_fsi_drv(drv); | 
 | 	const struct fsi_device_id *id; | 
 |  | 
 | 	if (!fsi_drv->id_table) | 
 | 		return 0; | 
 |  | 
 | 	for (id = fsi_drv->id_table; id->engine_type; id++) { | 
 | 		if (id->engine_type != fsi_dev->engine_type) | 
 | 			continue; | 
 | 		if (id->version == FSI_VERSION_ANY || | 
 | 				id->version == fsi_dev->version) | 
 | 			return 1; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int fsi_driver_register(struct fsi_driver *fsi_drv) | 
 | { | 
 | 	if (!fsi_drv) | 
 | 		return -EINVAL; | 
 | 	if (!fsi_drv->id_table) | 
 | 		return -EINVAL; | 
 |  | 
 | 	return driver_register(&fsi_drv->drv); | 
 | } | 
 | EXPORT_SYMBOL_GPL(fsi_driver_register); | 
 |  | 
 | void fsi_driver_unregister(struct fsi_driver *fsi_drv) | 
 | { | 
 | 	driver_unregister(&fsi_drv->drv); | 
 | } | 
 | EXPORT_SYMBOL_GPL(fsi_driver_unregister); | 
 |  | 
 | struct bus_type fsi_bus_type = { | 
 | 	.name		= "fsi", | 
 | 	.match		= fsi_bus_match, | 
 | }; | 
 | EXPORT_SYMBOL_GPL(fsi_bus_type); | 
 |  | 
 | static int __init fsi_init(void) | 
 | { | 
 | 	return bus_register(&fsi_bus_type); | 
 | } | 
 | postcore_initcall(fsi_init); | 
 |  | 
 | static void fsi_exit(void) | 
 | { | 
 | 	bus_unregister(&fsi_bus_type); | 
 | } | 
 | module_exit(fsi_exit); | 
 | module_param(discard_errors, int, 0664); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_PARM_DESC(discard_errors, "Don't invoke error handling on bus accesses"); |