| /* |
| * Device Tree Source for Qualcomm MDM9615 SoC |
| * |
| * Copyright (C) 2016 BayLibre, SAS. |
| * Author : Neil Armstrong <narmstrong@baylibre.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/qcom,gcc-mdm9615.h> |
| #include <dt-bindings/reset/qcom,gcc-mdm9615.h> |
| #include <dt-bindings/mfd/qcom-rpm.h> |
| #include <dt-bindings/soc/qcom,gsbi.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| model = "Qualcomm MDM9615"; |
| compatible = "qcom,mdm9615"; |
| interrupt-parent = <&intc>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| compatible = "arm,cortex-a5"; |
| device_type = "cpu"; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| cpu-pmu { |
| compatible = "arm,cortex-a5-pmu"; |
| interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| clocks { |
| cxo_board { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <19200000>; |
| }; |
| }; |
| |
| regulators { |
| vsdcc_fixed: vsdcc-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "SDCC Power"; |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <2700000>; |
| regulator-always-on; |
| }; |
| }; |
| |
| soc: soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| compatible = "simple-bus"; |
| |
| L2: l2-cache@2040000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0x02040000 0x1000>; |
| arm,data-latency = <2 2 0>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| |
| intc: interrupt-controller@2000000 { |
| compatible = "qcom,msm-qgic2"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| reg = <0x02000000 0x1000>, |
| <0x02002000 0x1000>; |
| }; |
| |
| timer@200a000 { |
| compatible = "qcom,kpss-timer", "qcom,msm-timer"; |
| interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>, |
| <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>, |
| <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>; |
| reg = <0x0200a000 0x100>; |
| clock-frequency = <27000000>, |
| <32768>; |
| cpu-offset = <0x80000>; |
| }; |
| |
| msmgpio: pinctrl@800000 { |
| compatible = "qcom,mdm9615-pinctrl"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x800000 0x4000>; |
| }; |
| |
| gcc: clock-controller@900000 { |
| compatible = "qcom,gcc-mdm9615"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| reg = <0x900000 0x4000>; |
| }; |
| |
| lcc: clock-controller@28000000 { |
| compatible = "qcom,lcc-mdm9615"; |
| reg = <0x28000000 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| l2cc: clock-controller@2011000 { |
| compatible = "syscon"; |
| reg = <0x02011000 0x1000>; |
| }; |
| |
| rng@1a500000 { |
| compatible = "qcom,prng"; |
| reg = <0x1a500000 0x200>; |
| clocks = <&gcc PRNG_CLK>; |
| clock-names = "core"; |
| assigned-clocks = <&gcc PRNG_CLK>; |
| assigned-clock-rates = <32000000>; |
| }; |
| |
| gsbi2: gsbi@16100000 { |
| compatible = "qcom,gsbi-v1.0.0"; |
| cell-index = <2>; |
| reg = <0x16100000 0x100>; |
| clocks = <&gcc GSBI2_H_CLK>; |
| clock-names = "iface"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| gsbi2_i2c: i2c@16180000 { |
| compatible = "qcom,i2c-qup-v1.1.1"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x16180000 0x1000>; |
| interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; |
| clock-names = "core", "iface"; |
| status = "disabled"; |
| }; |
| }; |
| |
| gsbi3: gsbi@16200000 { |
| compatible = "qcom,gsbi-v1.0.0"; |
| cell-index = <3>; |
| reg = <0x16200000 0x100>; |
| clocks = <&gcc GSBI3_H_CLK>; |
| clock-names = "iface"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| gsbi3_spi: spi@16280000 { |
| compatible = "qcom,spi-qup-v1.1.1"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x16280000 0x1000>; |
| interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; |
| spi-max-frequency = <24000000>; |
| |
| clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; |
| clock-names = "core", "iface"; |
| status = "disabled"; |
| }; |
| }; |
| |
| gsbi4: gsbi@16300000 { |
| compatible = "qcom,gsbi-v1.0.0"; |
| cell-index = <4>; |
| reg = <0x16300000 0x100>; |
| clocks = <&gcc GSBI4_H_CLK>; |
| clock-names = "iface"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| syscon-tcsr = <&tcsr>; |
| |
| gsbi4_serial: serial@16340000 { |
| compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; |
| reg = <0x16340000 0x1000>, |
| <0x16300000 0x1000>; |
| interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; |
| clock-names = "core", "iface"; |
| status = "disabled"; |
| }; |
| }; |
| |
| gsbi5: gsbi@16400000 { |
| compatible = "qcom,gsbi-v1.0.0"; |
| cell-index = <5>; |
| reg = <0x16400000 0x100>; |
| clocks = <&gcc GSBI5_H_CLK>; |
| clock-names = "iface"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| syscon-tcsr = <&tcsr>; |
| |
| gsbi5_i2c: i2c@16480000 { |
| compatible = "qcom,i2c-qup-v1.1.1"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x16480000 0x1000>; |
| interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; |
| |
| /* QUP clock is not initialized, set rate */ |
| assigned-clocks = <&gcc GSBI5_QUP_CLK>; |
| assigned-clock-rates = <24000000>; |
| |
| clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; |
| clock-names = "core", "iface"; |
| status = "disabled"; |
| }; |
| |
| gsbi5_serial: serial@16440000 { |
| compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; |
| reg = <0x16440000 0x1000>, |
| <0x16400000 0x1000>; |
| interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; |
| clock-names = "core", "iface"; |
| status = "disabled"; |
| }; |
| }; |
| |
| qcom,ssbi@500000 { |
| compatible = "qcom,ssbi"; |
| reg = <0x500000 0x1000>; |
| qcom,controller-type = "pmic-arbiter"; |
| |
| pmicintc: pmic@0 { |
| compatible = "qcom,pm8018", "qcom,pm8921"; |
| interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pwrkey@1c { |
| compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey"; |
| reg = <0x1c>; |
| interrupt-parent = <&pmicintc>; |
| interrupts = <50 IRQ_TYPE_EDGE_RISING>, |
| <51 IRQ_TYPE_EDGE_RISING>; |
| debounce = <15625>; |
| pull-up; |
| }; |
| |
| pmicmpp: mpp@50 { |
| compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp"; |
| interrupt-parent = <&pmicintc>; |
| interrupts = <24 IRQ_TYPE_NONE>, |
| <25 IRQ_TYPE_NONE>, |
| <26 IRQ_TYPE_NONE>, |
| <27 IRQ_TYPE_NONE>, |
| <28 IRQ_TYPE_NONE>, |
| <29 IRQ_TYPE_NONE>; |
| reg = <0x50>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| rtc@11d { |
| compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc"; |
| interrupt-parent = <&pmicintc>; |
| interrupts = <39 IRQ_TYPE_EDGE_RISING>; |
| reg = <0x11d>; |
| allow-set-time; |
| }; |
| |
| pmicgpio: gpio@150 { |
| compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| }; |
| }; |
| |
| sdcc1bam: dma@12182000{ |
| compatible = "qcom,bam-v1.3.0"; |
| reg = <0x12182000 0x8000>; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc SDC1_H_CLK>; |
| clock-names = "bam_clk"; |
| #dma-cells = <1>; |
| qcom,ee = <0>; |
| }; |
| |
| sdcc2bam: dma@12142000{ |
| compatible = "qcom,bam-v1.3.0"; |
| reg = <0x12142000 0x8000>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc SDC2_H_CLK>; |
| clock-names = "bam_clk"; |
| #dma-cells = <1>; |
| qcom,ee = <0>; |
| }; |
| |
| amba { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| sdcc1: sdcc@12180000 { |
| status = "disabled"; |
| compatible = "arm,pl18x", "arm,primecell"; |
| arm,primecell-periphid = <0x00051180>; |
| reg = <0x12180000 0x2000>; |
| interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "cmd_irq"; |
| clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; |
| clock-names = "mclk", "apb_pclk"; |
| bus-width = <8>; |
| max-frequency = <48000000>; |
| cap-sd-highspeed; |
| cap-mmc-highspeed; |
| vmmc-supply = <&vsdcc_fixed>; |
| dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; |
| dma-names = "tx", "rx"; |
| assigned-clocks = <&gcc SDC1_CLK>; |
| assigned-clock-rates = <400000>; |
| }; |
| |
| sdcc2: sdcc@12140000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| arm,primecell-periphid = <0x00051180>; |
| status = "disabled"; |
| reg = <0x12140000 0x2000>; |
| interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "cmd_irq"; |
| clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; |
| clock-names = "mclk", "apb_pclk"; |
| bus-width = <4>; |
| cap-sd-highspeed; |
| cap-mmc-highspeed; |
| max-frequency = <48000000>; |
| no-1-8-v; |
| vmmc-supply = <&vsdcc_fixed>; |
| dmas = <&sdcc2bam 2>, <&sdcc2bam 1>; |
| dma-names = "tx", "rx"; |
| assigned-clocks = <&gcc SDC2_CLK>; |
| assigned-clock-rates = <400000>; |
| }; |
| }; |
| |
| tcsr: syscon@1a400000 { |
| compatible = "qcom,tcsr-mdm9615", "syscon"; |
| reg = <0x1a400000 0x100>; |
| }; |
| |
| rpm: rpm@108000 { |
| compatible = "qcom,rpm-mdm9615"; |
| reg = <0x108000 0x1000>; |
| |
| qcom,ipc = <&l2cc 0x8 2>; |
| |
| interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "ack", "err", "wakeup"; |
| |
| regulators { |
| compatible = "qcom,rpm-pm8018-regulators"; |
| |
| vin_lvs1-supply = <&pm8018_s3>; |
| |
| vdd_l7-supply = <&pm8018_s4>; |
| vdd_l8-supply = <&pm8018_s3>; |
| vdd_l9_l10_l11_l12-supply = <&pm8018_s5>; |
| |
| /* Buck SMPS */ |
| pm8018_s1: s1 { |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1150000>; |
| qcom,switch-mode-frequency = <1600000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_s2: s2 { |
| regulator-min-microvolt = <1225000>; |
| regulator-max-microvolt = <1300000>; |
| qcom,switch-mode-frequency = <1600000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_s3: s3 { |
| regulator-always-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,switch-mode-frequency = <1600000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_s4: s4 { |
| regulator-min-microvolt = <2100000>; |
| regulator-max-microvolt = <2200000>; |
| qcom,switch-mode-frequency = <1600000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_s5: s5 { |
| regulator-always-on; |
| regulator-min-microvolt = <1350000>; |
| regulator-max-microvolt = <1350000>; |
| qcom,switch-mode-frequency = <1600000>; |
| bias-pull-down; |
| }; |
| |
| /* PMOS LDO */ |
| pm8018_l2: l2 { |
| regulator-always-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l3: l3 { |
| regulator-always-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l4: l4 { |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l5: l5 { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <2850000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l6: l6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2850000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l7: l7 { |
| regulator-min-microvolt = <1850000>; |
| regulator-max-microvolt = <1900000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l8: l8 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l9: l9 { |
| regulator-min-microvolt = <750000>; |
| regulator-max-microvolt = <1150000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l10: l10 { |
| regulator-min-microvolt = <1050000>; |
| regulator-max-microvolt = <1050000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l11: l11 { |
| regulator-min-microvolt = <1050000>; |
| regulator-max-microvolt = <1050000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l12: l12 { |
| regulator-min-microvolt = <1050000>; |
| regulator-max-microvolt = <1050000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l13: l13 { |
| regulator-min-microvolt = <1850000>; |
| regulator-max-microvolt = <2950000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l14: l14 { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <2850000>; |
| bias-pull-down; |
| }; |
| |
| /* Low Voltage Switch */ |
| pm8018_lvs1: lvs1 { |
| bias-pull-down; |
| }; |
| }; |
| }; |
| }; |
| }; |
