| /* |
| * Copyright (C) 2012-2013 Broadcom Corporation |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation version 2. |
| * |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any |
| * kind, whether express or implied; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| #include "dt-bindings/clock/bcm281xx.h" |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| model = "BCM11351 SoC"; |
| compatible = "brcm,bcm11351"; |
| interrupt-parent = <&gic>; |
| |
| chosen { |
| bootargs = "console=ttyS0,115200n8"; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <0>; |
| }; |
| |
| cpu1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| enable-method = "brcm,bcm11351-cpu-method"; |
| secondary-boot-reg = <0x3500417c>; |
| reg = <1>; |
| }; |
| }; |
| |
| gic: interrupt-controller@3ff00100 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| interrupt-controller; |
| reg = <0x3ff01000 0x1000>, |
| <0x3ff00100 0x100>; |
| }; |
| |
| smc@3404c000 { |
| compatible = "brcm,bcm11351-smc", "brcm,kona-smc"; |
| reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */ |
| }; |
| |
| uart@3e000000 { |
| compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; |
| status = "disabled"; |
| reg = <0x3e000000 0x1000>; |
| clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>; |
| interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| }; |
| |
| uart@3e001000 { |
| compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; |
| status = "disabled"; |
| reg = <0x3e001000 0x1000>; |
| clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>; |
| interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| }; |
| |
| uart@3e002000 { |
| compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; |
| status = "disabled"; |
| reg = <0x3e002000 0x1000>; |
| clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>; |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| }; |
| |
| uart@3e003000 { |
| compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; |
| status = "disabled"; |
| reg = <0x3e003000 0x1000>; |
| clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>; |
| interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| }; |
| |
| L2: l2-cache { |
| compatible = "brcm,bcm11351-a2-pl310-cache"; |
| reg = <0x3ff20000 0x1000>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| |
| watchdog@35002f40 { |
| compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt"; |
| reg = <0x35002f40 0x6c>; |
| }; |
| |
| timer@35006000 { |
| compatible = "brcm,kona-timer"; |
| reg = <0x35006000 0x1000>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>; |
| }; |
| |
| gpio: gpio@35003000 { |
| compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio"; |
| reg = <0x35003000 0x800>; |
| interrupts = |
| <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; |
| #gpio-cells = <2>; |
| #interrupt-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| }; |
| |
| sdio1: sdio@3f180000 { |
| compatible = "brcm,kona-sdhci"; |
| reg = <0x3f180000 0x10000>; |
| interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO1>; |
| status = "disabled"; |
| }; |
| |
| sdio2: sdio@3f190000 { |
| compatible = "brcm,kona-sdhci"; |
| reg = <0x3f190000 0x10000>; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO2>; |
| status = "disabled"; |
| }; |
| |
| sdio3: sdio@3f1a0000 { |
| compatible = "brcm,kona-sdhci"; |
| reg = <0x3f1a0000 0x10000>; |
| interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>; |
| status = "disabled"; |
| }; |
| |
| sdio4: sdio@3f1b0000 { |
| compatible = "brcm,kona-sdhci"; |
| reg = <0x3f1b0000 0x10000>; |
| interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO4>; |
| status = "disabled"; |
| }; |
| |
| pinctrl@35004800 { |
| compatible = "brcm,bcm11351-pinctrl"; |
| reg = <0x35004800 0x430>; |
| }; |
| |
| i2c@3e016000 { |
| compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c"; |
| reg = <0x3e016000 0x80>; |
| interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC1>; |
| status = "disabled"; |
| }; |
| |
| i2c@3e017000 { |
| compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c"; |
| reg = <0x3e017000 0x80>; |
| interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC2>; |
| status = "disabled"; |
| }; |
| |
| i2c@3e018000 { |
| compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c"; |
| reg = <0x3e018000 0x80>; |
| interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC3>; |
| status = "disabled"; |
| }; |
| |
| i2c@3500d000 { |
| compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c"; |
| reg = <0x3500d000 0x80>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&aon_ccu BCM281XX_AON_CCU_PMU_BSC>; |
| status = "disabled"; |
| }; |
| |
| pwm: pwm@3e01a000 { |
| compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm"; |
| reg = <0x3e01a000 0xcc>; |
| clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| root_ccu: root_ccu { |
| compatible = "brcm,bcm11351-root-ccu"; |
| reg = <0x35001000 0x0f00>; |
| #clock-cells = <1>; |
| clock-output-names = "frac_1m"; |
| }; |
| |
| hub_ccu: hub_ccu { |
| compatible = "brcm,bcm11351-hub-ccu"; |
| reg = <0x34000000 0x0f00>; |
| #clock-cells = <1>; |
| clock-output-names = "tmon_1m"; |
| }; |
| |
| aon_ccu: aon_ccu { |
| compatible = "brcm,bcm11351-aon-ccu"; |
| reg = <0x35002000 0x0f00>; |
| #clock-cells = <1>; |
| clock-output-names = "hub_timer", |
| "pmu_bsc", |
| "pmu_bsc_var"; |
| }; |
| |
| master_ccu: master_ccu { |
| compatible = "brcm,bcm11351-master-ccu"; |
| reg = <0x3f001000 0x0f00>; |
| #clock-cells = <1>; |
| clock-output-names = "sdio1", |
| "sdio2", |
| "sdio3", |
| "sdio4", |
| "usb_ic", |
| "hsic2_48m", |
| "hsic2_12m"; |
| }; |
| |
| slave_ccu: slave_ccu { |
| compatible = "brcm,bcm11351-slave-ccu"; |
| reg = <0x3e011000 0x0f00>; |
| #clock-cells = <1>; |
| clock-output-names = "uartb", |
| "uartb2", |
| "uartb3", |
| "uartb4", |
| "ssp0", |
| "ssp2", |
| "bsc1", |
| "bsc2", |
| "bsc3", |
| "pwm"; |
| }; |
| |
| ref_1m_clk: ref_1m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <1000000>; |
| }; |
| |
| ref_32k_clk: ref_32k { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| }; |
| |
| bbl_32k_clk: bbl_32k { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| }; |
| |
| ref_13m_clk: ref_13m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <13000000>; |
| }; |
| |
| var_13m_clk: var_13m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <13000000>; |
| }; |
| |
| dft_19_5m_clk: dft_19_5m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <19500000>; |
| }; |
| |
| ref_crystal_clk: ref_crystal { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <26000000>; |
| }; |
| |
| ref_cx40_clk: ref_cx40 { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <40000000>; |
| }; |
| |
| ref_52m_clk: ref_52m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <52000000>; |
| }; |
| |
| var_52m_clk: var_52m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <52000000>; |
| }; |
| |
| usb_otg_ahb_clk: usb_otg_ahb { |
| compatible = "fixed-clock"; |
| clock-frequency = <52000000>; |
| #clock-cells = <0>; |
| }; |
| |
| ref_96m_clk: ref_96m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <96000000>; |
| }; |
| |
| var_96m_clk: var_96m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <96000000>; |
| }; |
| |
| ref_104m_clk: ref_104m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <104000000>; |
| }; |
| |
| var_104m_clk: var_104m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <104000000>; |
| }; |
| |
| ref_156m_clk: ref_156m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <156000000>; |
| }; |
| |
| var_156m_clk: var_156m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <156000000>; |
| }; |
| |
| ref_208m_clk: ref_208m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <208000000>; |
| }; |
| |
| var_208m_clk: var_208m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <208000000>; |
| }; |
| |
| ref_312m_clk: ref_312m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <312000000>; |
| }; |
| |
| var_312m_clk: var_312m { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <312000000>; |
| }; |
| }; |
| |
| usbotg: usb@3f120000 { |
| compatible = "snps,dwc2"; |
| reg = <0x3f120000 0x10000>; |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&usb_otg_ahb_clk>; |
| clock-names = "otg"; |
| phys = <&usbphy>; |
| phy-names = "usb2-phy"; |
| status = "disabled"; |
| }; |
| |
| usbphy: usb-phy@3f130000 { |
| compatible = "brcm,kona-usb2-phy"; |
| reg = <0x3f130000 0x28>; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
