| /* | 
 | ** ----------------------------------------------------------------------------- | 
 | ** | 
 | **  Perle Specialix driver for Linux | 
 | **  Ported from existing RIO Driver for SCO sources. | 
 |  * | 
 |  *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. | 
 |  * | 
 |  *      This program is free software; you can redistribute it and/or modify | 
 |  *      it under the terms of the GNU General Public License as published by | 
 |  *      the Free Software Foundation; either version 2 of the License, or | 
 |  *      (at your option) any later version. | 
 |  * | 
 |  *      This program is distributed in the hope that it will be useful, | 
 |  *      but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  *      GNU General Public License for more details. | 
 |  * | 
 |  *      You should have received a copy of the GNU General Public License | 
 |  *      along with this program; if not, write to the Free Software | 
 |  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
 | ** | 
 | **	Module		: riospace.h | 
 | **	SID		: 1.2 | 
 | **	Last Modified	: 11/6/98 11:34:13 | 
 | **	Retrieved	: 11/6/98 11:34:22 | 
 | ** | 
 | **  ident @(#)riospace.h	1.2 | 
 | ** | 
 | ** ----------------------------------------------------------------------------- | 
 | */ | 
 |  | 
 | #ifndef __rio_riospace_h__ | 
 | #define __rio_riospace_h__ | 
 |  | 
 | #ifdef SCCS_LABELS | 
 | static char *_riospace_h_sccs_ = "@(#)riospace.h	1.2"; | 
 | #endif | 
 |  | 
 | #define	RIO_LOCATOR_LEN	16 | 
 | #define	MAX_RIO_BOARDS	4 | 
 |  | 
 | /* | 
 | ** DONT change this file. At all. Unless you can rebuild the entire | 
 | ** device driver, which you probably can't, then the rest of the | 
 | ** driver won't see any changes you make here. So don't make any. | 
 | ** In particular, it won't be able to see changes to RIO_SLOTS | 
 | */ | 
 |  | 
 | struct Conf { | 
 | 	char Locator[24]; | 
 | 	unsigned int StartupTime; | 
 | 	unsigned int SlowCook; | 
 | 	unsigned int IntrPollTime; | 
 | 	unsigned int BreakInterval; | 
 | 	unsigned int Timer; | 
 | 	unsigned int RtaLoadBase; | 
 | 	unsigned int HostLoadBase; | 
 | 	unsigned int XpHz; | 
 | 	unsigned int XpCps; | 
 | 	char *XpOn; | 
 | 	char *XpOff; | 
 | 	unsigned int MaxXpCps; | 
 | 	unsigned int MinXpCps; | 
 | 	unsigned int SpinCmds; | 
 | 	unsigned int FirstAddr; | 
 | 	unsigned int LastAddr; | 
 | 	unsigned int BufferSize; | 
 | 	unsigned int LowWater; | 
 | 	unsigned int LineLength; | 
 | 	unsigned int CmdTime; | 
 | }; | 
 |  | 
 | /* | 
 | **	Board types - these MUST correspond to product codes! | 
 | */ | 
 | #define	RIO_EMPTY	0x0 | 
 | #define	RIO_EISA	0x3 | 
 | #define	RIO_RTA_16	0x9 | 
 | #define	RIO_AT		0xA | 
 | #define	RIO_MCA		0xB | 
 | #define	RIO_PCI		0xD | 
 | #define	RIO_RTA		0xE | 
 |  | 
 | /* | 
 | **	Board data structure. This is used for configuration info | 
 | */ | 
 | struct Brd { | 
 | 	unsigned char Type;	/* RIO_EISA, RIO_MCA, RIO_AT, RIO_EMPTY... */ | 
 | 	unsigned char Ivec;	/* POLLED or ivec number */ | 
 | 	unsigned char Mode;	/* Control stuff, see below */ | 
 | }; | 
 |  | 
 | struct Board { | 
 | 	char Locator[RIO_LOCATOR_LEN]; | 
 | 	int NumSlots; | 
 | 	struct Brd Boards[MAX_RIO_BOARDS]; | 
 | }; | 
 |  | 
 | #define	BOOT_FROM_LINK		0x00 | 
 | #define	BOOT_FROM_RAM		0x01 | 
 | #define	EXTERNAL_BUS_OFF	0x00 | 
 | #define	EXTERNAL_BUS_ON		0x02 | 
 | #define	INTERRUPT_DISABLE	0x00 | 
 | #define	INTERRUPT_ENABLE	0x04 | 
 | #define	BYTE_OPERATION		0x00 | 
 | #define	WORD_OPERATION		0x08 | 
 | #define	POLLED			INTERRUPT_DISABLE | 
 | #define	IRQ_15			(0x00 | INTERRUPT_ENABLE) | 
 | #define	IRQ_12			(0x10 | INTERRUPT_ENABLE) | 
 | #define	IRQ_11			(0x20 | INTERRUPT_ENABLE) | 
 | #define	IRQ_9			(0x30 | INTERRUPT_ENABLE) | 
 | #define	SLOW_LINKS		0x00 | 
 | #define	FAST_LINKS		0x40 | 
 | #define	SLOW_AT_BUS		0x00 | 
 | #define	FAST_AT_BUS		0x80 | 
 | #define	SLOW_PCI_TP		0x00 | 
 | #define	FAST_PCI_TP		0x80 | 
 | /* | 
 | **	Debug levels | 
 | */ | 
 | #define	DBG_NONE	0x00000000 | 
 |  | 
 | #define	DBG_INIT	0x00000001 | 
 | #define	DBG_OPEN	0x00000002 | 
 | #define	DBG_CLOSE	0x00000004 | 
 | #define	DBG_IOCTL	0x00000008 | 
 |  | 
 | #define	DBG_READ	0x00000010 | 
 | #define	DBG_WRITE	0x00000020 | 
 | #define	DBG_INTR	0x00000040 | 
 | #define	DBG_PROC	0x00000080 | 
 |  | 
 | #define	DBG_PARAM	0x00000100 | 
 | #define	DBG_CMD		0x00000200 | 
 | #define	DBG_XPRINT	0x00000400 | 
 | #define	DBG_POLL	0x00000800 | 
 |  | 
 | #define	DBG_DAEMON	0x00001000 | 
 | #define	DBG_FAIL	0x00002000 | 
 | #define DBG_MODEM	0x00004000 | 
 | #define	DBG_LIST	0x00008000 | 
 |  | 
 | #define	DBG_ROUTE	0x00010000 | 
 | #define DBG_UTIL        0x00020000 | 
 | #define DBG_BOOT	0x00040000 | 
 | #define DBG_BUFFER	0x00080000 | 
 |  | 
 | #define	DBG_MON		0x00100000 | 
 | #define DBG_SPECIAL     0x00200000 | 
 | #define	DBG_VPIX	0x00400000 | 
 | #define	DBG_FLUSH	0x00800000 | 
 |  | 
 | #define	DBG_QENABLE	0x01000000 | 
 |  | 
 | #define	DBG_ALWAYS	0x80000000 | 
 |  | 
 | #endif				/* __rio_riospace_h__ */ |