|  | /* | 
|  | * Interrupt controller support for Galileo's GT64260. | 
|  | * | 
|  | * Author: Chris Zankel <source@mvista.com> | 
|  | * Modified by: Mark A. Greer <mgreer@mvista.com> | 
|  | * | 
|  | * Based on sources from Rabeeh Khoury / Galileo Technology | 
|  | * | 
|  | * 2001 (c) MontaVista, Software, Inc.  This file is licensed under | 
|  | * the terms of the GNU General Public License version 2.  This program | 
|  | * is licensed "as is" without any warranty of any kind, whether express | 
|  | * or implied. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * This file contains the specific functions to support the GT64260 | 
|  | * interrupt controller. | 
|  | * | 
|  | * The GT64260 has two main interrupt registers (high and low) that | 
|  | * summarizes the interrupts generated by the units of the GT64260. | 
|  | * Each bit is assigned to an interrupt number, where the low register | 
|  | * are assigned from IRQ0 to IRQ31 and the high cause register | 
|  | * from IRQ32 to IRQ63 | 
|  | * The GPP (General Purpose Port) interrupts are assigned from IRQ64 (GPP0) | 
|  | * to IRQ95 (GPP31). | 
|  | * get_irq() returns the lowest interrupt number that is currently asserted. | 
|  | * | 
|  | * Note: | 
|  | *  - This driver does not initialize the GPP when used as an interrupt | 
|  | *    input. | 
|  | */ | 
|  |  | 
|  | #include <linux/stddef.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/signal.h> | 
|  | #include <linux/stddef.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/irq.h> | 
|  |  | 
|  | #include <asm/io.h> | 
|  | #include <asm/system.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/mv64x60.h> | 
|  | #include <asm/machdep.h> | 
|  |  | 
|  | #define CPU_INTR_STR	"gt64260 cpu interface error" | 
|  | #define PCI0_INTR_STR	"gt64260 pci 0 error" | 
|  | #define PCI1_INTR_STR	"gt64260 pci 1 error" | 
|  |  | 
|  | /* ========================== forward declaration ========================== */ | 
|  |  | 
|  | static void gt64260_unmask_irq(unsigned int); | 
|  | static void gt64260_mask_irq(unsigned int); | 
|  |  | 
|  | /* ========================== local declarations =========================== */ | 
|  |  | 
|  | struct hw_interrupt_type gt64260_pic = { | 
|  | .typename = " gt64260_pic ", | 
|  | .enable   = gt64260_unmask_irq, | 
|  | .disable  = gt64260_mask_irq, | 
|  | .ack      = gt64260_mask_irq, | 
|  | .end      = gt64260_unmask_irq, | 
|  | }; | 
|  |  | 
|  | u32 gt64260_irq_base = 0;	/* GT64260 handles the next 96 IRQs from here */ | 
|  |  | 
|  | static struct mv64x60_handle bh; | 
|  |  | 
|  | /* gt64260_init_irq() | 
|  | * | 
|  | *  This function initializes the interrupt controller. It assigns | 
|  | *  all interrupts from IRQ0 to IRQ95 to the gt64260 interrupt controller. | 
|  | * | 
|  | * Note: | 
|  | *  We register all GPP inputs as interrupt source, but disable them. | 
|  | */ | 
|  | void __init | 
|  | gt64260_init_irq(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (ppc_md.progress) | 
|  | ppc_md.progress("gt64260_init_irq: enter", 0x0); | 
|  |  | 
|  | bh.v_base = mv64x60_get_bridge_vbase(); | 
|  |  | 
|  | ppc_cached_irq_mask[0] = 0; | 
|  | ppc_cached_irq_mask[1] = 0x0f000000;	/* Enable GPP intrs */ | 
|  | ppc_cached_irq_mask[2] = 0; | 
|  |  | 
|  | /* disable all interrupts and clear current interrupts */ | 
|  | mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, ppc_cached_irq_mask[2]); | 
|  | mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, 0); | 
|  | mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_LO, ppc_cached_irq_mask[0]); | 
|  | mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_HI, ppc_cached_irq_mask[1]); | 
|  |  | 
|  | /* use the gt64260 for all (possible) interrupt sources */ | 
|  | for (i = gt64260_irq_base; i < (gt64260_irq_base + 96); i++) | 
|  | irq_desc[i].chip = >64260_pic; | 
|  |  | 
|  | if (ppc_md.progress) | 
|  | ppc_md.progress("gt64260_init_irq: exit", 0x0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * gt64260_get_irq() | 
|  | * | 
|  | *  This function returns the lowest interrupt number of all interrupts that | 
|  | *  are currently asserted. | 
|  | * | 
|  | * Output Variable(s): | 
|  | *  None. | 
|  | * | 
|  | * Returns: | 
|  | *  int	<interrupt number> or -2 (bogus interrupt) | 
|  | */ | 
|  | int | 
|  | gt64260_get_irq(void) | 
|  | { | 
|  | int irq; | 
|  | int irq_gpp; | 
|  |  | 
|  | irq = mv64x60_read(&bh, GT64260_IC_MAIN_CAUSE_LO); | 
|  | irq = __ilog2((irq & 0x3dfffffe) & ppc_cached_irq_mask[0]); | 
|  |  | 
|  | if (irq == -1) { | 
|  | irq = mv64x60_read(&bh, GT64260_IC_MAIN_CAUSE_HI); | 
|  | irq = __ilog2((irq & 0x0f000db7) & ppc_cached_irq_mask[1]); | 
|  |  | 
|  | if (irq == -1) | 
|  | irq = -2; /* bogus interrupt, should never happen */ | 
|  | else { | 
|  | if (irq >= 24) { | 
|  | irq_gpp = mv64x60_read(&bh, | 
|  | MV64x60_GPP_INTR_CAUSE); | 
|  | irq_gpp = __ilog2(irq_gpp & | 
|  | ppc_cached_irq_mask[2]); | 
|  |  | 
|  | if (irq_gpp == -1) | 
|  | irq = -2; | 
|  | else { | 
|  | irq = irq_gpp + 64; | 
|  | mv64x60_write(&bh, | 
|  | MV64x60_GPP_INTR_CAUSE, | 
|  | ~(1 << (irq - 64))); | 
|  | } | 
|  | } else | 
|  | irq += 32; | 
|  | } | 
|  | } | 
|  |  | 
|  | (void)mv64x60_read(&bh, MV64x60_GPP_INTR_CAUSE); | 
|  |  | 
|  | if (irq < 0) | 
|  | return (irq); | 
|  | else | 
|  | return (gt64260_irq_base + irq); | 
|  | } | 
|  |  | 
|  | /* gt64260_unmask_irq() | 
|  | * | 
|  | *  This function enables an interrupt. | 
|  | * | 
|  | * Input Variable(s): | 
|  | *  unsigned int	interrupt number (IRQ0...IRQ95). | 
|  | * | 
|  | * Output Variable(s): | 
|  | *  None. | 
|  | * | 
|  | * Returns: | 
|  | *  void | 
|  | */ | 
|  | static void | 
|  | gt64260_unmask_irq(unsigned int irq) | 
|  | { | 
|  | irq -= gt64260_irq_base; | 
|  |  | 
|  | if (irq > 31) | 
|  | if (irq > 63) /* unmask GPP irq */ | 
|  | mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, | 
|  | ppc_cached_irq_mask[2] |= (1 << (irq - 64))); | 
|  | else /* mask high interrupt register */ | 
|  | mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_HI, | 
|  | ppc_cached_irq_mask[1] |= (1 << (irq - 32))); | 
|  | else /* mask low interrupt register */ | 
|  | mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_LO, | 
|  | ppc_cached_irq_mask[0] |= (1 << irq)); | 
|  |  | 
|  | (void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* gt64260_mask_irq() | 
|  | * | 
|  | *  This function disables the requested interrupt. | 
|  | * | 
|  | * Input Variable(s): | 
|  | *  unsigned int	interrupt number (IRQ0...IRQ95). | 
|  | * | 
|  | * Output Variable(s): | 
|  | *  None. | 
|  | * | 
|  | * Returns: | 
|  | *  void | 
|  | */ | 
|  | static void | 
|  | gt64260_mask_irq(unsigned int irq) | 
|  | { | 
|  | irq -= gt64260_irq_base; | 
|  |  | 
|  | if (irq > 31) | 
|  | if (irq > 63) /* mask GPP irq */ | 
|  | mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, | 
|  | ppc_cached_irq_mask[2] &= ~(1 << (irq - 64))); | 
|  | else /* mask high interrupt register */ | 
|  | mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_HI, | 
|  | ppc_cached_irq_mask[1] &= ~(1 << (irq - 32))); | 
|  | else /* mask low interrupt register */ | 
|  | mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_LO, | 
|  | ppc_cached_irq_mask[0] &= ~(1 << irq)); | 
|  |  | 
|  | (void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK); | 
|  | return; | 
|  | } | 
|  |  | 
|  | static irqreturn_t | 
|  | gt64260_cpu_error_int_handler(int irq, void *dev_id) | 
|  | { | 
|  | printk(KERN_ERR "gt64260_cpu_error_int_handler: %s 0x%08x\n", | 
|  | "Error on CPU interface - Cause regiser", | 
|  | mv64x60_read(&bh, MV64x60_CPU_ERR_CAUSE)); | 
|  | printk(KERN_ERR "\tCPU error register dump:\n"); | 
|  | printk(KERN_ERR "\tAddress low  0x%08x\n", | 
|  | mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_LO)); | 
|  | printk(KERN_ERR "\tAddress high 0x%08x\n", | 
|  | mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_HI)); | 
|  | printk(KERN_ERR "\tData low     0x%08x\n", | 
|  | mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_LO)); | 
|  | printk(KERN_ERR "\tData high    0x%08x\n", | 
|  | mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_HI)); | 
|  | printk(KERN_ERR "\tParity       0x%08x\n", | 
|  | mv64x60_read(&bh, MV64x60_CPU_ERR_PARITY)); | 
|  | mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static irqreturn_t | 
|  | gt64260_pci_error_int_handler(int irq, void *dev_id) | 
|  | { | 
|  | u32 val; | 
|  | unsigned int pci_bus = (unsigned int)dev_id; | 
|  |  | 
|  | if (pci_bus == 0) {	/* Error on PCI 0 */ | 
|  | val = mv64x60_read(&bh, MV64x60_PCI0_ERR_CAUSE); | 
|  | printk(KERN_ERR "%s: Error in PCI %d Interface\n", | 
|  | "gt64260_pci_error_int_handler", pci_bus); | 
|  | printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus); | 
|  | printk(KERN_ERR "\tCause register 0x%08x\n", val); | 
|  | printk(KERN_ERR "\tAddress Low    0x%08x\n", | 
|  | mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_LO)); | 
|  | printk(KERN_ERR "\tAddress High   0x%08x\n", | 
|  | mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_HI)); | 
|  | printk(KERN_ERR "\tAttribute      0x%08x\n", | 
|  | mv64x60_read(&bh, MV64x60_PCI0_ERR_DATA_LO)); | 
|  | printk(KERN_ERR "\tCommand        0x%08x\n", | 
|  | mv64x60_read(&bh, MV64x60_PCI0_ERR_CMD)); | 
|  | mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, ~val); | 
|  | } | 
|  | if (pci_bus == 1) {	/* Error on PCI 1 */ | 
|  | val = mv64x60_read(&bh, MV64x60_PCI1_ERR_CAUSE); | 
|  | printk(KERN_ERR "%s: Error in PCI %d Interface\n", | 
|  | "gt64260_pci_error_int_handler", pci_bus); | 
|  | printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus); | 
|  | printk(KERN_ERR "\tCause register 0x%08x\n", val); | 
|  | printk(KERN_ERR "\tAddress Low    0x%08x\n", | 
|  | mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_LO)); | 
|  | printk(KERN_ERR "\tAddress High   0x%08x\n", | 
|  | mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_HI)); | 
|  | printk(KERN_ERR "\tAttribute      0x%08x\n", | 
|  | mv64x60_read(&bh, MV64x60_PCI1_ERR_DATA_LO)); | 
|  | printk(KERN_ERR "\tCommand        0x%08x\n", | 
|  | mv64x60_read(&bh, MV64x60_PCI1_ERR_CMD)); | 
|  | mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, ~val); | 
|  | } | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int __init | 
|  | gt64260_register_hdlrs(void) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | /* Register CPU interface error interrupt handler */ | 
|  | if ((rc = request_irq(MV64x60_IRQ_CPU_ERR, | 
|  | gt64260_cpu_error_int_handler, IRQF_DISABLED, CPU_INTR_STR, 0))) | 
|  | printk(KERN_WARNING "Can't register cpu error handler: %d", rc); | 
|  |  | 
|  | mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0); | 
|  | mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0x000000fe); | 
|  |  | 
|  | /* Register PCI 0 error interrupt handler */ | 
|  | if ((rc = request_irq(MV64360_IRQ_PCI0, gt64260_pci_error_int_handler, | 
|  | IRQF_DISABLED, PCI0_INTR_STR, (void *)0))) | 
|  | printk(KERN_WARNING "Can't register pci 0 error handler: %d", | 
|  | rc); | 
|  |  | 
|  | mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0); | 
|  | mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0x003c0c24); | 
|  |  | 
|  | /* Register PCI 1 error interrupt handler */ | 
|  | if ((rc = request_irq(MV64360_IRQ_PCI1, gt64260_pci_error_int_handler, | 
|  | IRQF_DISABLED, PCI1_INTR_STR, (void *)1))) | 
|  | printk(KERN_WARNING "Can't register pci 1 error handler: %d", | 
|  | rc); | 
|  |  | 
|  | mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0); | 
|  | mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0x003c0c24); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | arch_initcall(gt64260_register_hdlrs); |