| /* | |
| * Copyright © 2012-2014 Intel Corporation | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a | |
| * copy of this software and associated documentation files (the "Software"), | |
| * to deal in the Software without restriction, including without limitation | |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| * and/or sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice (including the next | |
| * paragraph) shall be included in all copies or substantial portions of the | |
| * Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER | |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS | |
| * IN THE SOFTWARE. | |
| * | |
| * Authors: | |
| * Eugeni Dodonov <eugeni.dodonov@intel.com> | |
| * Daniel Vetter <daniel.vetter@ffwll.ch> | |
| * | |
| */ | |
| #include <linux/pm_runtime.h> | |
| #include <linux/vgaarb.h> | |
| #include "i915_drv.h" | |
| #include "intel_drv.h" | |
| /** | |
| * DOC: runtime pm | |
| * | |
| * The i915 driver supports dynamic enabling and disabling of entire hardware | |
| * blocks at runtime. This is especially important on the display side where | |
| * software is supposed to control many power gates manually on recent hardware, | |
| * since on the GT side a lot of the power management is done by the hardware. | |
| * But even there some manual control at the device level is required. | |
| * | |
| * Since i915 supports a diverse set of platforms with a unified codebase and | |
| * hardware engineers just love to shuffle functionality around between power | |
| * domains there's a sizeable amount of indirection required. This file provides | |
| * generic functions to the driver for grabbing and releasing references for | |
| * abstract power domains. It then maps those to the actual power wells | |
| * present for a given platform. | |
| */ | |
| #define for_each_power_well(i, power_well, domain_mask, power_domains) \ | |
| for (i = 0; \ | |
| i < (power_domains)->power_well_count && \ | |
| ((power_well) = &(power_domains)->power_wells[i]); \ | |
| i++) \ | |
| for_each_if ((power_well)->domains & (domain_mask)) | |
| #define for_each_power_well_rev(i, power_well, domain_mask, power_domains) \ | |
| for (i = (power_domains)->power_well_count - 1; \ | |
| i >= 0 && ((power_well) = &(power_domains)->power_wells[i]);\ | |
| i--) \ | |
| for_each_if ((power_well)->domains & (domain_mask)) | |
| bool intel_display_power_well_is_enabled(struct drm_i915_private *dev_priv, | |
| int power_well_id); | |
| const char * | |
| intel_display_power_domain_str(enum intel_display_power_domain domain) | |
| { | |
| switch (domain) { | |
| case POWER_DOMAIN_PIPE_A: | |
| return "PIPE_A"; | |
| case POWER_DOMAIN_PIPE_B: | |
| return "PIPE_B"; | |
| case POWER_DOMAIN_PIPE_C: | |
| return "PIPE_C"; | |
| case POWER_DOMAIN_PIPE_A_PANEL_FITTER: | |
| return "PIPE_A_PANEL_FITTER"; | |
| case POWER_DOMAIN_PIPE_B_PANEL_FITTER: | |
| return "PIPE_B_PANEL_FITTER"; | |
| case POWER_DOMAIN_PIPE_C_PANEL_FITTER: | |
| return "PIPE_C_PANEL_FITTER"; | |
| case POWER_DOMAIN_TRANSCODER_A: | |
| return "TRANSCODER_A"; | |
| case POWER_DOMAIN_TRANSCODER_B: | |
| return "TRANSCODER_B"; | |
| case POWER_DOMAIN_TRANSCODER_C: | |
| return "TRANSCODER_C"; | |
| case POWER_DOMAIN_TRANSCODER_EDP: | |
| return "TRANSCODER_EDP"; | |
| case POWER_DOMAIN_PORT_DDI_A_LANES: | |
| return "PORT_DDI_A_LANES"; | |
| case POWER_DOMAIN_PORT_DDI_B_LANES: | |
| return "PORT_DDI_B_LANES"; | |
| case POWER_DOMAIN_PORT_DDI_C_LANES: | |
| return "PORT_DDI_C_LANES"; | |
| case POWER_DOMAIN_PORT_DDI_D_LANES: | |
| return "PORT_DDI_D_LANES"; | |
| case POWER_DOMAIN_PORT_DDI_E_LANES: | |
| return "PORT_DDI_E_LANES"; | |
| case POWER_DOMAIN_PORT_DSI: | |
| return "PORT_DSI"; | |
| case POWER_DOMAIN_PORT_CRT: | |
| return "PORT_CRT"; | |
| case POWER_DOMAIN_PORT_OTHER: | |
| return "PORT_OTHER"; | |
| case POWER_DOMAIN_VGA: | |
| return "VGA"; | |
| case POWER_DOMAIN_AUDIO: | |
| return "AUDIO"; | |
| case POWER_DOMAIN_PLLS: | |
| return "PLLS"; | |
| case POWER_DOMAIN_AUX_A: | |
| return "AUX_A"; | |
| case POWER_DOMAIN_AUX_B: | |
| return "AUX_B"; | |
| case POWER_DOMAIN_AUX_C: | |
| return "AUX_C"; | |
| case POWER_DOMAIN_AUX_D: | |
| return "AUX_D"; | |
| case POWER_DOMAIN_GMBUS: | |
| return "GMBUS"; | |
| case POWER_DOMAIN_INIT: | |
| return "INIT"; | |
| case POWER_DOMAIN_MODESET: | |
| return "MODESET"; | |
| default: | |
| MISSING_CASE(domain); | |
| return "?"; | |
| } | |
| } | |
| static void intel_power_well_enable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| DRM_DEBUG_KMS("enabling %s\n", power_well->name); | |
| power_well->ops->enable(dev_priv, power_well); | |
| power_well->hw_enabled = true; | |
| } | |
| static void intel_power_well_disable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| DRM_DEBUG_KMS("disabling %s\n", power_well->name); | |
| power_well->hw_enabled = false; | |
| power_well->ops->disable(dev_priv, power_well); | |
| } | |
| /* | |
| * We should only use the power well if we explicitly asked the hardware to | |
| * enable it, so check if it's enabled and also check if we've requested it to | |
| * be enabled. | |
| */ | |
| static bool hsw_power_well_enabled(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| return I915_READ(HSW_PWR_WELL_DRIVER) == | |
| (HSW_PWR_WELL_ENABLE_REQUEST | HSW_PWR_WELL_STATE_ENABLED); | |
| } | |
| /** | |
| * __intel_display_power_is_enabled - unlocked check for a power domain | |
| * @dev_priv: i915 device instance | |
| * @domain: power domain to check | |
| * | |
| * This is the unlocked version of intel_display_power_is_enabled() and should | |
| * only be used from error capture and recovery code where deadlocks are | |
| * possible. | |
| * | |
| * Returns: | |
| * True when the power domain is enabled, false otherwise. | |
| */ | |
| bool __intel_display_power_is_enabled(struct drm_i915_private *dev_priv, | |
| enum intel_display_power_domain domain) | |
| { | |
| struct i915_power_domains *power_domains; | |
| struct i915_power_well *power_well; | |
| bool is_enabled; | |
| int i; | |
| if (dev_priv->pm.suspended) | |
| return false; | |
| power_domains = &dev_priv->power_domains; | |
| is_enabled = true; | |
| for_each_power_well_rev(i, power_well, BIT(domain), power_domains) { | |
| if (power_well->always_on) | |
| continue; | |
| if (!power_well->hw_enabled) { | |
| is_enabled = false; | |
| break; | |
| } | |
| } | |
| return is_enabled; | |
| } | |
| /** | |
| * intel_display_power_is_enabled - check for a power domain | |
| * @dev_priv: i915 device instance | |
| * @domain: power domain to check | |
| * | |
| * This function can be used to check the hw power domain state. It is mostly | |
| * used in hardware state readout functions. Everywhere else code should rely | |
| * upon explicit power domain reference counting to ensure that the hardware | |
| * block is powered up before accessing it. | |
| * | |
| * Callers must hold the relevant modesetting locks to ensure that concurrent | |
| * threads can't disable the power well while the caller tries to read a few | |
| * registers. | |
| * | |
| * Returns: | |
| * True when the power domain is enabled, false otherwise. | |
| */ | |
| bool intel_display_power_is_enabled(struct drm_i915_private *dev_priv, | |
| enum intel_display_power_domain domain) | |
| { | |
| struct i915_power_domains *power_domains; | |
| bool ret; | |
| power_domains = &dev_priv->power_domains; | |
| mutex_lock(&power_domains->lock); | |
| ret = __intel_display_power_is_enabled(dev_priv, domain); | |
| mutex_unlock(&power_domains->lock); | |
| return ret; | |
| } | |
| /** | |
| * intel_display_set_init_power - set the initial power domain state | |
| * @dev_priv: i915 device instance | |
| * @enable: whether to enable or disable the initial power domain state | |
| * | |
| * For simplicity our driver load/unload and system suspend/resume code assumes | |
| * that all power domains are always enabled. This functions controls the state | |
| * of this little hack. While the initial power domain state is enabled runtime | |
| * pm is effectively disabled. | |
| */ | |
| void intel_display_set_init_power(struct drm_i915_private *dev_priv, | |
| bool enable) | |
| { | |
| if (dev_priv->power_domains.init_power_on == enable) | |
| return; | |
| if (enable) | |
| intel_display_power_get(dev_priv, POWER_DOMAIN_INIT); | |
| else | |
| intel_display_power_put(dev_priv, POWER_DOMAIN_INIT); | |
| dev_priv->power_domains.init_power_on = enable; | |
| } | |
| /* | |
| * Starting with Haswell, we have a "Power Down Well" that can be turned off | |
| * when not needed anymore. We have 4 registers that can request the power well | |
| * to be enabled, and it will only be disabled if none of the registers is | |
| * requesting it to be enabled. | |
| */ | |
| static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv) | |
| { | |
| struct drm_device *dev = dev_priv->dev; | |
| /* | |
| * After we re-enable the power well, if we touch VGA register 0x3d5 | |
| * we'll get unclaimed register interrupts. This stops after we write | |
| * anything to the VGA MSR register. The vgacon module uses this | |
| * register all the time, so if we unbind our driver and, as a | |
| * consequence, bind vgacon, we'll get stuck in an infinite loop at | |
| * console_unlock(). So make here we touch the VGA MSR register, making | |
| * sure vgacon can keep working normally without triggering interrupts | |
| * and error messages. | |
| */ | |
| vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO); | |
| outb(inb(VGA_MSR_READ), VGA_MSR_WRITE); | |
| vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); | |
| if (IS_BROADWELL(dev)) | |
| gen8_irq_power_well_post_enable(dev_priv, | |
| 1 << PIPE_C | 1 << PIPE_B); | |
| } | |
| static void hsw_power_well_pre_disable(struct drm_i915_private *dev_priv) | |
| { | |
| if (IS_BROADWELL(dev_priv)) | |
| gen8_irq_power_well_pre_disable(dev_priv, | |
| 1 << PIPE_C | 1 << PIPE_B); | |
| } | |
| static void skl_power_well_post_enable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| struct drm_device *dev = dev_priv->dev; | |
| /* | |
| * After we re-enable the power well, if we touch VGA register 0x3d5 | |
| * we'll get unclaimed register interrupts. This stops after we write | |
| * anything to the VGA MSR register. The vgacon module uses this | |
| * register all the time, so if we unbind our driver and, as a | |
| * consequence, bind vgacon, we'll get stuck in an infinite loop at | |
| * console_unlock(). So make here we touch the VGA MSR register, making | |
| * sure vgacon can keep working normally without triggering interrupts | |
| * and error messages. | |
| */ | |
| if (power_well->data == SKL_DISP_PW_2) { | |
| vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO); | |
| outb(inb(VGA_MSR_READ), VGA_MSR_WRITE); | |
| vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); | |
| gen8_irq_power_well_post_enable(dev_priv, | |
| 1 << PIPE_C | 1 << PIPE_B); | |
| } | |
| } | |
| static void skl_power_well_pre_disable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| if (power_well->data == SKL_DISP_PW_2) | |
| gen8_irq_power_well_pre_disable(dev_priv, | |
| 1 << PIPE_C | 1 << PIPE_B); | |
| } | |
| static void hsw_set_power_well(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well, bool enable) | |
| { | |
| bool is_enabled, enable_requested; | |
| uint32_t tmp; | |
| tmp = I915_READ(HSW_PWR_WELL_DRIVER); | |
| is_enabled = tmp & HSW_PWR_WELL_STATE_ENABLED; | |
| enable_requested = tmp & HSW_PWR_WELL_ENABLE_REQUEST; | |
| if (enable) { | |
| if (!enable_requested) | |
| I915_WRITE(HSW_PWR_WELL_DRIVER, | |
| HSW_PWR_WELL_ENABLE_REQUEST); | |
| if (!is_enabled) { | |
| DRM_DEBUG_KMS("Enabling power well\n"); | |
| if (wait_for((I915_READ(HSW_PWR_WELL_DRIVER) & | |
| HSW_PWR_WELL_STATE_ENABLED), 20)) | |
| DRM_ERROR("Timeout enabling power well\n"); | |
| hsw_power_well_post_enable(dev_priv); | |
| } | |
| } else { | |
| if (enable_requested) { | |
| hsw_power_well_pre_disable(dev_priv); | |
| I915_WRITE(HSW_PWR_WELL_DRIVER, 0); | |
| POSTING_READ(HSW_PWR_WELL_DRIVER); | |
| DRM_DEBUG_KMS("Requesting to disable the power well\n"); | |
| } | |
| } | |
| } | |
| #define SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS ( \ | |
| BIT(POWER_DOMAIN_TRANSCODER_A) | \ | |
| BIT(POWER_DOMAIN_PIPE_B) | \ | |
| BIT(POWER_DOMAIN_TRANSCODER_B) | \ | |
| BIT(POWER_DOMAIN_PIPE_C) | \ | |
| BIT(POWER_DOMAIN_TRANSCODER_C) | \ | |
| BIT(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \ | |
| BIT(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \ | |
| BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \ | |
| BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \ | |
| BIT(POWER_DOMAIN_PORT_DDI_D_LANES) | \ | |
| BIT(POWER_DOMAIN_PORT_DDI_E_LANES) | \ | |
| BIT(POWER_DOMAIN_AUX_B) | \ | |
| BIT(POWER_DOMAIN_AUX_C) | \ | |
| BIT(POWER_DOMAIN_AUX_D) | \ | |
| BIT(POWER_DOMAIN_AUDIO) | \ | |
| BIT(POWER_DOMAIN_VGA) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define SKL_DISPLAY_DDI_A_E_POWER_DOMAINS ( \ | |
| BIT(POWER_DOMAIN_PORT_DDI_A_LANES) | \ | |
| BIT(POWER_DOMAIN_PORT_DDI_E_LANES) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define SKL_DISPLAY_DDI_B_POWER_DOMAINS ( \ | |
| BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define SKL_DISPLAY_DDI_C_POWER_DOMAINS ( \ | |
| BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define SKL_DISPLAY_DDI_D_POWER_DOMAINS ( \ | |
| BIT(POWER_DOMAIN_PORT_DDI_D_LANES) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define SKL_DISPLAY_DC_OFF_POWER_DOMAINS ( \ | |
| SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS | \ | |
| BIT(POWER_DOMAIN_MODESET) | \ | |
| BIT(POWER_DOMAIN_AUX_A) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define SKL_DISPLAY_ALWAYS_ON_POWER_DOMAINS ( \ | |
| (POWER_DOMAIN_MASK & ~( \ | |
| SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS | \ | |
| SKL_DISPLAY_DC_OFF_POWER_DOMAINS)) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS ( \ | |
| BIT(POWER_DOMAIN_TRANSCODER_A) | \ | |
| BIT(POWER_DOMAIN_PIPE_B) | \ | |
| BIT(POWER_DOMAIN_TRANSCODER_B) | \ | |
| BIT(POWER_DOMAIN_PIPE_C) | \ | |
| BIT(POWER_DOMAIN_TRANSCODER_C) | \ | |
| BIT(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \ | |
| BIT(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \ | |
| BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \ | |
| BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \ | |
| BIT(POWER_DOMAIN_AUX_B) | \ | |
| BIT(POWER_DOMAIN_AUX_C) | \ | |
| BIT(POWER_DOMAIN_AUDIO) | \ | |
| BIT(POWER_DOMAIN_VGA) | \ | |
| BIT(POWER_DOMAIN_GMBUS) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define BXT_DISPLAY_POWERWELL_1_POWER_DOMAINS ( \ | |
| BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS | \ | |
| BIT(POWER_DOMAIN_PIPE_A) | \ | |
| BIT(POWER_DOMAIN_TRANSCODER_EDP) | \ | |
| BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \ | |
| BIT(POWER_DOMAIN_PORT_DDI_A_LANES) | \ | |
| BIT(POWER_DOMAIN_AUX_A) | \ | |
| BIT(POWER_DOMAIN_PLLS) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define BXT_DISPLAY_DC_OFF_POWER_DOMAINS ( \ | |
| BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS | \ | |
| BIT(POWER_DOMAIN_MODESET) | \ | |
| BIT(POWER_DOMAIN_AUX_A) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define BXT_DISPLAY_ALWAYS_ON_POWER_DOMAINS ( \ | |
| (POWER_DOMAIN_MASK & ~(BXT_DISPLAY_POWERWELL_1_POWER_DOMAINS | \ | |
| BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS)) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| static void assert_can_enable_dc9(struct drm_i915_private *dev_priv) | |
| { | |
| struct drm_device *dev = dev_priv->dev; | |
| WARN(!IS_BROXTON(dev), "Platform doesn't support DC9.\n"); | |
| WARN((I915_READ(DC_STATE_EN) & DC_STATE_EN_DC9), | |
| "DC9 already programmed to be enabled.\n"); | |
| WARN(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5, | |
| "DC5 still not disabled to enable DC9.\n"); | |
| WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on.\n"); | |
| WARN(intel_irqs_enabled(dev_priv), "Interrupts not disabled yet.\n"); | |
| /* | |
| * TODO: check for the following to verify the conditions to enter DC9 | |
| * state are satisfied: | |
| * 1] Check relevant display engine registers to verify if mode set | |
| * disable sequence was followed. | |
| * 2] Check if display uninitialize sequence is initialized. | |
| */ | |
| } | |
| static void assert_can_disable_dc9(struct drm_i915_private *dev_priv) | |
| { | |
| WARN(intel_irqs_enabled(dev_priv), "Interrupts not disabled yet.\n"); | |
| WARN(!(I915_READ(DC_STATE_EN) & DC_STATE_EN_DC9), | |
| "DC9 already programmed to be disabled.\n"); | |
| WARN(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5, | |
| "DC5 still not disabled.\n"); | |
| /* | |
| * TODO: check for the following to verify DC9 state was indeed | |
| * entered before programming to disable it: | |
| * 1] Check relevant display engine registers to verify if mode | |
| * set disable sequence was followed. | |
| * 2] Check if display uninitialize sequence is initialized. | |
| */ | |
| } | |
| static void gen9_set_dc_state_debugmask(struct drm_i915_private *dev_priv) | |
| { | |
| uint32_t val, mask; | |
| mask = DC_STATE_DEBUG_MASK_MEMORY_UP; | |
| if (IS_BROXTON(dev_priv)) | |
| mask |= DC_STATE_DEBUG_MASK_CORES; | |
| /* The below bit doesn't need to be cleared ever afterwards */ | |
| val = I915_READ(DC_STATE_DEBUG); | |
| if ((val & mask) != mask) { | |
| val |= mask; | |
| I915_WRITE(DC_STATE_DEBUG, val); | |
| POSTING_READ(DC_STATE_DEBUG); | |
| } | |
| } | |
| static void gen9_write_dc_state(struct drm_i915_private *dev_priv, | |
| u32 state) | |
| { | |
| int rewrites = 0; | |
| int rereads = 0; | |
| u32 v; | |
| I915_WRITE(DC_STATE_EN, state); | |
| /* It has been observed that disabling the dc6 state sometimes | |
| * doesn't stick and dmc keeps returning old value. Make sure | |
| * the write really sticks enough times and also force rewrite until | |
| * we are confident that state is exactly what we want. | |
| */ | |
| do { | |
| v = I915_READ(DC_STATE_EN); | |
| if (v != state) { | |
| I915_WRITE(DC_STATE_EN, state); | |
| rewrites++; | |
| rereads = 0; | |
| } else if (rereads++ > 5) { | |
| break; | |
| } | |
| } while (rewrites < 100); | |
| if (v != state) | |
| DRM_ERROR("Writing dc state to 0x%x failed, now 0x%x\n", | |
| state, v); | |
| /* Most of the times we need one retry, avoid spam */ | |
| if (rewrites > 1) | |
| DRM_DEBUG_KMS("Rewrote dc state to 0x%x %d times\n", | |
| state, rewrites); | |
| } | |
| static void gen9_set_dc_state(struct drm_i915_private *dev_priv, uint32_t state) | |
| { | |
| uint32_t val; | |
| uint32_t mask; | |
| mask = DC_STATE_EN_UPTO_DC5; | |
| if (IS_BROXTON(dev_priv)) | |
| mask |= DC_STATE_EN_DC9; | |
| else | |
| mask |= DC_STATE_EN_UPTO_DC6; | |
| WARN_ON_ONCE(state & ~mask); | |
| if (i915.enable_dc == 0) | |
| state = DC_STATE_DISABLE; | |
| else if (i915.enable_dc == 1 && state > DC_STATE_EN_UPTO_DC5) | |
| state = DC_STATE_EN_UPTO_DC5; | |
| val = I915_READ(DC_STATE_EN); | |
| DRM_DEBUG_KMS("Setting DC state from %02x to %02x\n", | |
| val & mask, state); | |
| /* Check if DMC is ignoring our DC state requests */ | |
| if ((val & mask) != dev_priv->csr.dc_state) | |
| DRM_ERROR("DC state mismatch (0x%x -> 0x%x)\n", | |
| dev_priv->csr.dc_state, val & mask); | |
| val &= ~mask; | |
| val |= state; | |
| gen9_write_dc_state(dev_priv, val); | |
| dev_priv->csr.dc_state = val & mask; | |
| } | |
| void bxt_enable_dc9(struct drm_i915_private *dev_priv) | |
| { | |
| assert_can_enable_dc9(dev_priv); | |
| DRM_DEBUG_KMS("Enabling DC9\n"); | |
| gen9_set_dc_state(dev_priv, DC_STATE_EN_DC9); | |
| } | |
| void bxt_disable_dc9(struct drm_i915_private *dev_priv) | |
| { | |
| assert_can_disable_dc9(dev_priv); | |
| DRM_DEBUG_KMS("Disabling DC9\n"); | |
| gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); | |
| } | |
| static void assert_csr_loaded(struct drm_i915_private *dev_priv) | |
| { | |
| WARN_ONCE(!I915_READ(CSR_PROGRAM(0)), | |
| "CSR program storage start is NULL\n"); | |
| WARN_ONCE(!I915_READ(CSR_SSP_BASE), "CSR SSP Base Not fine\n"); | |
| WARN_ONCE(!I915_READ(CSR_HTP_SKL), "CSR HTP Not fine\n"); | |
| } | |
| static void assert_can_enable_dc5(struct drm_i915_private *dev_priv) | |
| { | |
| struct drm_device *dev = dev_priv->dev; | |
| bool pg2_enabled = intel_display_power_well_is_enabled(dev_priv, | |
| SKL_DISP_PW_2); | |
| WARN_ONCE(!IS_SKYLAKE(dev) && !IS_KABYLAKE(dev), | |
| "Platform doesn't support DC5.\n"); | |
| WARN_ONCE(!HAS_RUNTIME_PM(dev), "Runtime PM not enabled.\n"); | |
| WARN_ONCE(pg2_enabled, "PG2 not disabled to enable DC5.\n"); | |
| WARN_ONCE((I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5), | |
| "DC5 already programmed to be enabled.\n"); | |
| assert_rpm_wakelock_held(dev_priv); | |
| assert_csr_loaded(dev_priv); | |
| } | |
| static void assert_can_disable_dc5(struct drm_i915_private *dev_priv) | |
| { | |
| /* | |
| * During initialization, the firmware may not be loaded yet. | |
| * We still want to make sure that the DC enabling flag is cleared. | |
| */ | |
| if (dev_priv->power_domains.initializing) | |
| return; | |
| assert_rpm_wakelock_held(dev_priv); | |
| } | |
| static void gen9_enable_dc5(struct drm_i915_private *dev_priv) | |
| { | |
| assert_can_enable_dc5(dev_priv); | |
| DRM_DEBUG_KMS("Enabling DC5\n"); | |
| gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC5); | |
| } | |
| static void assert_can_enable_dc6(struct drm_i915_private *dev_priv) | |
| { | |
| struct drm_device *dev = dev_priv->dev; | |
| WARN_ONCE(!IS_SKYLAKE(dev) && !IS_KABYLAKE(dev), | |
| "Platform doesn't support DC6.\n"); | |
| WARN_ONCE(!HAS_RUNTIME_PM(dev), "Runtime PM not enabled.\n"); | |
| WARN_ONCE(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE, | |
| "Backlight is not disabled.\n"); | |
| WARN_ONCE((I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC6), | |
| "DC6 already programmed to be enabled.\n"); | |
| assert_csr_loaded(dev_priv); | |
| } | |
| static void assert_can_disable_dc6(struct drm_i915_private *dev_priv) | |
| { | |
| /* | |
| * During initialization, the firmware may not be loaded yet. | |
| * We still want to make sure that the DC enabling flag is cleared. | |
| */ | |
| if (dev_priv->power_domains.initializing) | |
| return; | |
| WARN_ONCE(!(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC6), | |
| "DC6 already programmed to be disabled.\n"); | |
| } | |
| static void gen9_disable_dc5_dc6(struct drm_i915_private *dev_priv) | |
| { | |
| assert_can_disable_dc5(dev_priv); | |
| if ((IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) && | |
| i915.enable_dc != 0 && i915.enable_dc != 1) | |
| assert_can_disable_dc6(dev_priv); | |
| gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); | |
| } | |
| void skl_enable_dc6(struct drm_i915_private *dev_priv) | |
| { | |
| assert_can_enable_dc6(dev_priv); | |
| DRM_DEBUG_KMS("Enabling DC6\n"); | |
| gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6); | |
| } | |
| void skl_disable_dc6(struct drm_i915_private *dev_priv) | |
| { | |
| assert_can_disable_dc6(dev_priv); | |
| DRM_DEBUG_KMS("Disabling DC6\n"); | |
| gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); | |
| } | |
| static void skl_set_power_well(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well, bool enable) | |
| { | |
| uint32_t tmp, fuse_status; | |
| uint32_t req_mask, state_mask; | |
| bool is_enabled, enable_requested, check_fuse_status = false; | |
| tmp = I915_READ(HSW_PWR_WELL_DRIVER); | |
| fuse_status = I915_READ(SKL_FUSE_STATUS); | |
| switch (power_well->data) { | |
| case SKL_DISP_PW_1: | |
| if (wait_for((I915_READ(SKL_FUSE_STATUS) & | |
| SKL_FUSE_PG0_DIST_STATUS), 1)) { | |
| DRM_ERROR("PG0 not enabled\n"); | |
| return; | |
| } | |
| break; | |
| case SKL_DISP_PW_2: | |
| if (!(fuse_status & SKL_FUSE_PG1_DIST_STATUS)) { | |
| DRM_ERROR("PG1 in disabled state\n"); | |
| return; | |
| } | |
| break; | |
| case SKL_DISP_PW_DDI_A_E: | |
| case SKL_DISP_PW_DDI_B: | |
| case SKL_DISP_PW_DDI_C: | |
| case SKL_DISP_PW_DDI_D: | |
| case SKL_DISP_PW_MISC_IO: | |
| break; | |
| default: | |
| WARN(1, "Unknown power well %lu\n", power_well->data); | |
| return; | |
| } | |
| req_mask = SKL_POWER_WELL_REQ(power_well->data); | |
| enable_requested = tmp & req_mask; | |
| state_mask = SKL_POWER_WELL_STATE(power_well->data); | |
| is_enabled = tmp & state_mask; | |
| if (!enable && enable_requested) | |
| skl_power_well_pre_disable(dev_priv, power_well); | |
| if (enable) { | |
| if (!enable_requested) { | |
| WARN((tmp & state_mask) && | |
| !I915_READ(HSW_PWR_WELL_BIOS), | |
| "Invalid for power well status to be enabled, unless done by the BIOS, \ | |
| when request is to disable!\n"); | |
| I915_WRITE(HSW_PWR_WELL_DRIVER, tmp | req_mask); | |
| } | |
| if (!is_enabled) { | |
| DRM_DEBUG_KMS("Enabling %s\n", power_well->name); | |
| if (wait_for((I915_READ(HSW_PWR_WELL_DRIVER) & | |
| state_mask), 1)) | |
| DRM_ERROR("%s enable timeout\n", | |
| power_well->name); | |
| check_fuse_status = true; | |
| } | |
| } else { | |
| if (enable_requested) { | |
| I915_WRITE(HSW_PWR_WELL_DRIVER, tmp & ~req_mask); | |
| POSTING_READ(HSW_PWR_WELL_DRIVER); | |
| DRM_DEBUG_KMS("Disabling %s\n", power_well->name); | |
| } | |
| } | |
| if (check_fuse_status) { | |
| if (power_well->data == SKL_DISP_PW_1) { | |
| if (wait_for((I915_READ(SKL_FUSE_STATUS) & | |
| SKL_FUSE_PG1_DIST_STATUS), 1)) | |
| DRM_ERROR("PG1 distributing status timeout\n"); | |
| } else if (power_well->data == SKL_DISP_PW_2) { | |
| if (wait_for((I915_READ(SKL_FUSE_STATUS) & | |
| SKL_FUSE_PG2_DIST_STATUS), 1)) | |
| DRM_ERROR("PG2 distributing status timeout\n"); | |
| } | |
| } | |
| if (enable && !is_enabled) | |
| skl_power_well_post_enable(dev_priv, power_well); | |
| } | |
| static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| hsw_set_power_well(dev_priv, power_well, power_well->count > 0); | |
| /* | |
| * We're taking over the BIOS, so clear any requests made by it since | |
| * the driver is in charge now. | |
| */ | |
| if (I915_READ(HSW_PWR_WELL_BIOS) & HSW_PWR_WELL_ENABLE_REQUEST) | |
| I915_WRITE(HSW_PWR_WELL_BIOS, 0); | |
| } | |
| static void hsw_power_well_enable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| hsw_set_power_well(dev_priv, power_well, true); | |
| } | |
| static void hsw_power_well_disable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| hsw_set_power_well(dev_priv, power_well, false); | |
| } | |
| static bool skl_power_well_enabled(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| uint32_t mask = SKL_POWER_WELL_REQ(power_well->data) | | |
| SKL_POWER_WELL_STATE(power_well->data); | |
| return (I915_READ(HSW_PWR_WELL_DRIVER) & mask) == mask; | |
| } | |
| static void skl_power_well_sync_hw(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| skl_set_power_well(dev_priv, power_well, power_well->count > 0); | |
| /* Clear any request made by BIOS as driver is taking over */ | |
| I915_WRITE(HSW_PWR_WELL_BIOS, 0); | |
| } | |
| static void skl_power_well_enable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| skl_set_power_well(dev_priv, power_well, true); | |
| } | |
| static void skl_power_well_disable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| skl_set_power_well(dev_priv, power_well, false); | |
| } | |
| static bool gen9_dc_off_power_well_enabled(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| return (I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5_DC6_MASK) == 0; | |
| } | |
| static void gen9_dc_off_power_well_enable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| gen9_disable_dc5_dc6(dev_priv); | |
| } | |
| static void gen9_dc_off_power_well_disable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| if ((IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) && | |
| i915.enable_dc != 0 && i915.enable_dc != 1) | |
| skl_enable_dc6(dev_priv); | |
| else | |
| gen9_enable_dc5(dev_priv); | |
| } | |
| static void gen9_dc_off_power_well_sync_hw(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| if (power_well->count > 0) { | |
| gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); | |
| } else { | |
| if ((IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) && | |
| i915.enable_dc != 0 && | |
| i915.enable_dc != 1) | |
| gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6); | |
| else | |
| gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC5); | |
| } | |
| } | |
| static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| } | |
| static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| return true; | |
| } | |
| static void vlv_set_power_well(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well, bool enable) | |
| { | |
| enum punit_power_well power_well_id = power_well->data; | |
| u32 mask; | |
| u32 state; | |
| u32 ctrl; | |
| mask = PUNIT_PWRGT_MASK(power_well_id); | |
| state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) : | |
| PUNIT_PWRGT_PWR_GATE(power_well_id); | |
| mutex_lock(&dev_priv->rps.hw_lock); | |
| #define COND \ | |
| ((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state) | |
| if (COND) | |
| goto out; | |
| ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL); | |
| ctrl &= ~mask; | |
| ctrl |= state; | |
| vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl); | |
| if (wait_for(COND, 100)) | |
| DRM_ERROR("timeout setting power well state %08x (%08x)\n", | |
| state, | |
| vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL)); | |
| #undef COND | |
| out: | |
| mutex_unlock(&dev_priv->rps.hw_lock); | |
| } | |
| static void vlv_power_well_sync_hw(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| vlv_set_power_well(dev_priv, power_well, power_well->count > 0); | |
| } | |
| static void vlv_power_well_enable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| vlv_set_power_well(dev_priv, power_well, true); | |
| } | |
| static void vlv_power_well_disable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| vlv_set_power_well(dev_priv, power_well, false); | |
| } | |
| static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| int power_well_id = power_well->data; | |
| bool enabled = false; | |
| u32 mask; | |
| u32 state; | |
| u32 ctrl; | |
| mask = PUNIT_PWRGT_MASK(power_well_id); | |
| ctrl = PUNIT_PWRGT_PWR_ON(power_well_id); | |
| mutex_lock(&dev_priv->rps.hw_lock); | |
| state = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask; | |
| /* | |
| * We only ever set the power-on and power-gate states, anything | |
| * else is unexpected. | |
| */ | |
| WARN_ON(state != PUNIT_PWRGT_PWR_ON(power_well_id) && | |
| state != PUNIT_PWRGT_PWR_GATE(power_well_id)); | |
| if (state == ctrl) | |
| enabled = true; | |
| /* | |
| * A transient state at this point would mean some unexpected party | |
| * is poking at the power controls too. | |
| */ | |
| ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL) & mask; | |
| WARN_ON(ctrl != state); | |
| mutex_unlock(&dev_priv->rps.hw_lock); | |
| return enabled; | |
| } | |
| static void vlv_display_power_well_init(struct drm_i915_private *dev_priv) | |
| { | |
| enum pipe pipe; | |
| /* | |
| * Enable the CRI clock source so we can get at the | |
| * display and the reference clock for VGA | |
| * hotplug / manual detection. Supposedly DSI also | |
| * needs the ref clock up and running. | |
| * | |
| * CHV DPLL B/C have some issues if VGA mode is enabled. | |
| */ | |
| for_each_pipe(dev_priv->dev, pipe) { | |
| u32 val = I915_READ(DPLL(pipe)); | |
| val |= DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS; | |
| if (pipe != PIPE_A) | |
| val |= DPLL_INTEGRATED_CRI_CLK_VLV; | |
| I915_WRITE(DPLL(pipe), val); | |
| } | |
| spin_lock_irq(&dev_priv->irq_lock); | |
| valleyview_enable_display_irqs(dev_priv); | |
| spin_unlock_irq(&dev_priv->irq_lock); | |
| /* | |
| * During driver initialization/resume we can avoid restoring the | |
| * part of the HW/SW state that will be inited anyway explicitly. | |
| */ | |
| if (dev_priv->power_domains.initializing) | |
| return; | |
| intel_hpd_init(dev_priv); | |
| i915_redisable_vga_power_on(dev_priv->dev); | |
| } | |
| static void vlv_display_power_well_deinit(struct drm_i915_private *dev_priv) | |
| { | |
| spin_lock_irq(&dev_priv->irq_lock); | |
| valleyview_disable_display_irqs(dev_priv); | |
| spin_unlock_irq(&dev_priv->irq_lock); | |
| /* make sure we're done processing display irqs */ | |
| synchronize_irq(dev_priv->dev->irq); | |
| vlv_power_sequencer_reset(dev_priv); | |
| } | |
| static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D); | |
| vlv_set_power_well(dev_priv, power_well, true); | |
| vlv_display_power_well_init(dev_priv); | |
| } | |
| static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D); | |
| vlv_display_power_well_deinit(dev_priv); | |
| vlv_set_power_well(dev_priv, power_well, false); | |
| } | |
| static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC); | |
| /* since ref/cri clock was enabled */ | |
| udelay(1); /* >10ns for cmnreset, >0ns for sidereset */ | |
| vlv_set_power_well(dev_priv, power_well, true); | |
| /* | |
| * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx - | |
| * 6. De-assert cmn_reset/side_reset. Same as VLV X0. | |
| * a. GUnit 0x2110 bit[0] set to 1 (def 0) | |
| * b. The other bits such as sfr settings / modesel may all | |
| * be set to 0. | |
| * | |
| * This should only be done on init and resume from S3 with | |
| * both PLLs disabled, or we risk losing DPIO and PLL | |
| * synchronization. | |
| */ | |
| I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST); | |
| } | |
| static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| enum pipe pipe; | |
| WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC); | |
| for_each_pipe(dev_priv, pipe) | |
| assert_pll_disabled(dev_priv, pipe); | |
| /* Assert common reset */ | |
| I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) & ~DPIO_CMNRST); | |
| vlv_set_power_well(dev_priv, power_well, false); | |
| } | |
| #define POWER_DOMAIN_MASK (BIT(POWER_DOMAIN_NUM) - 1) | |
| static struct i915_power_well *lookup_power_well(struct drm_i915_private *dev_priv, | |
| int power_well_id) | |
| { | |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; | |
| int i; | |
| for (i = 0; i < power_domains->power_well_count; i++) { | |
| struct i915_power_well *power_well; | |
| power_well = &power_domains->power_wells[i]; | |
| if (power_well->data == power_well_id) | |
| return power_well; | |
| } | |
| return NULL; | |
| } | |
| #define BITS_SET(val, bits) (((val) & (bits)) == (bits)) | |
| static void assert_chv_phy_status(struct drm_i915_private *dev_priv) | |
| { | |
| struct i915_power_well *cmn_bc = | |
| lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC); | |
| struct i915_power_well *cmn_d = | |
| lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_D); | |
| u32 phy_control = dev_priv->chv_phy_control; | |
| u32 phy_status = 0; | |
| u32 phy_status_mask = 0xffffffff; | |
| u32 tmp; | |
| /* | |
| * The BIOS can leave the PHY is some weird state | |
| * where it doesn't fully power down some parts. | |
| * Disable the asserts until the PHY has been fully | |
| * reset (ie. the power well has been disabled at | |
| * least once). | |
| */ | |
| if (!dev_priv->chv_phy_assert[DPIO_PHY0]) | |
| phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0) | | |
| PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0) | | |
| PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1) | | |
| PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1) | | |
| PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0) | | |
| PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1)); | |
| if (!dev_priv->chv_phy_assert[DPIO_PHY1]) | |
| phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0) | | |
| PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0) | | |
| PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1)); | |
| if (cmn_bc->ops->is_enabled(dev_priv, cmn_bc)) { | |
| phy_status |= PHY_POWERGOOD(DPIO_PHY0); | |
| /* this assumes override is only used to enable lanes */ | |
| if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH0)) == 0) | |
| phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0); | |
| if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH1)) == 0) | |
| phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1); | |
| /* CL1 is on whenever anything is on in either channel */ | |
| if (BITS_SET(phy_control, | |
| PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0) | | |
| PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1))) | |
| phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0); | |
| /* | |
| * The DPLLB check accounts for the pipe B + port A usage | |
| * with CL2 powered up but all the lanes in the second channel | |
| * powered down. | |
| */ | |
| if (BITS_SET(phy_control, | |
| PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1)) && | |
| (I915_READ(DPLL(PIPE_B)) & DPLL_VCO_ENABLE) == 0) | |
| phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1); | |
| if (BITS_SET(phy_control, | |
| PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH0))) | |
| phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0); | |
| if (BITS_SET(phy_control, | |
| PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH0))) | |
| phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1); | |
| if (BITS_SET(phy_control, | |
| PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH1))) | |
| phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0); | |
| if (BITS_SET(phy_control, | |
| PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH1))) | |
| phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1); | |
| } | |
| if (cmn_d->ops->is_enabled(dev_priv, cmn_d)) { | |
| phy_status |= PHY_POWERGOOD(DPIO_PHY1); | |
| /* this assumes override is only used to enable lanes */ | |
| if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY1, DPIO_CH0)) == 0) | |
| phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0); | |
| if (BITS_SET(phy_control, | |
| PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0))) | |
| phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0); | |
| if (BITS_SET(phy_control, | |
| PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY1, DPIO_CH0))) | |
| phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0); | |
| if (BITS_SET(phy_control, | |
| PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY1, DPIO_CH0))) | |
| phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1); | |
| } | |
| phy_status &= phy_status_mask; | |
| /* | |
| * The PHY may be busy with some initial calibration and whatnot, | |
| * so the power state can take a while to actually change. | |
| */ | |
| if (wait_for((tmp = I915_READ(DISPLAY_PHY_STATUS) & phy_status_mask) == phy_status, 10)) | |
| WARN(phy_status != tmp, | |
| "Unexpected PHY_STATUS 0x%08x, expected 0x%08x (PHY_CONTROL=0x%08x)\n", | |
| tmp, phy_status, dev_priv->chv_phy_control); | |
| } | |
| #undef BITS_SET | |
| static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| enum dpio_phy phy; | |
| enum pipe pipe; | |
| uint32_t tmp; | |
| WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC && | |
| power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D); | |
| if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) { | |
| pipe = PIPE_A; | |
| phy = DPIO_PHY0; | |
| } else { | |
| pipe = PIPE_C; | |
| phy = DPIO_PHY1; | |
| } | |
| /* since ref/cri clock was enabled */ | |
| udelay(1); /* >10ns for cmnreset, >0ns for sidereset */ | |
| vlv_set_power_well(dev_priv, power_well, true); | |
| /* Poll for phypwrgood signal */ | |
| if (wait_for(I915_READ(DISPLAY_PHY_STATUS) & PHY_POWERGOOD(phy), 1)) | |
| DRM_ERROR("Display PHY %d is not power up\n", phy); | |
| mutex_lock(&dev_priv->sb_lock); | |
| /* Enable dynamic power down */ | |
| tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW28); | |
| tmp |= DPIO_DYNPWRDOWNEN_CH0 | DPIO_CL1POWERDOWNEN | | |
| DPIO_SUS_CLK_CONFIG_GATE_CLKREQ; | |
| vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW28, tmp); | |
| if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) { | |
| tmp = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW6_CH1); | |
| tmp |= DPIO_DYNPWRDOWNEN_CH1; | |
| vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW6_CH1, tmp); | |
| } else { | |
| /* | |
| * Force the non-existing CL2 off. BXT does this | |
| * too, so maybe it saves some power even though | |
| * CL2 doesn't exist? | |
| */ | |
| tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW30); | |
| tmp |= DPIO_CL2_LDOFUSE_PWRENB; | |
| vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW30, tmp); | |
| } | |
| mutex_unlock(&dev_priv->sb_lock); | |
| dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(phy); | |
| I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control); | |
| DRM_DEBUG_KMS("Enabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n", | |
| phy, dev_priv->chv_phy_control); | |
| assert_chv_phy_status(dev_priv); | |
| } | |
| static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| enum dpio_phy phy; | |
| WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC && | |
| power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D); | |
| if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) { | |
| phy = DPIO_PHY0; | |
| assert_pll_disabled(dev_priv, PIPE_A); | |
| assert_pll_disabled(dev_priv, PIPE_B); | |
| } else { | |
| phy = DPIO_PHY1; | |
| assert_pll_disabled(dev_priv, PIPE_C); | |
| } | |
| dev_priv->chv_phy_control &= ~PHY_COM_LANE_RESET_DEASSERT(phy); | |
| I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control); | |
| vlv_set_power_well(dev_priv, power_well, false); | |
| DRM_DEBUG_KMS("Disabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n", | |
| phy, dev_priv->chv_phy_control); | |
| /* PHY is fully reset now, so we can enable the PHY state asserts */ | |
| dev_priv->chv_phy_assert[phy] = true; | |
| assert_chv_phy_status(dev_priv); | |
| } | |
| static void assert_chv_phy_powergate(struct drm_i915_private *dev_priv, enum dpio_phy phy, | |
| enum dpio_channel ch, bool override, unsigned int mask) | |
| { | |
| enum pipe pipe = phy == DPIO_PHY0 ? PIPE_A : PIPE_C; | |
| u32 reg, val, expected, actual; | |
| /* | |
| * The BIOS can leave the PHY is some weird state | |
| * where it doesn't fully power down some parts. | |
| * Disable the asserts until the PHY has been fully | |
| * reset (ie. the power well has been disabled at | |
| * least once). | |
| */ | |
| if (!dev_priv->chv_phy_assert[phy]) | |
| return; | |
| if (ch == DPIO_CH0) | |
| reg = _CHV_CMN_DW0_CH0; | |
| else | |
| reg = _CHV_CMN_DW6_CH1; | |
| mutex_lock(&dev_priv->sb_lock); | |
| val = vlv_dpio_read(dev_priv, pipe, reg); | |
| mutex_unlock(&dev_priv->sb_lock); | |
| /* | |
| * This assumes !override is only used when the port is disabled. | |
| * All lanes should power down even without the override when | |
| * the port is disabled. | |
| */ | |
| if (!override || mask == 0xf) { | |
| expected = DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN; | |
| /* | |
| * If CH1 common lane is not active anymore | |
| * (eg. for pipe B DPLL) the entire channel will | |
| * shut down, which causes the common lane registers | |
| * to read as 0. That means we can't actually check | |
| * the lane power down status bits, but as the entire | |
| * register reads as 0 it's a good indication that the | |
| * channel is indeed entirely powered down. | |
| */ | |
| if (ch == DPIO_CH1 && val == 0) | |
| expected = 0; | |
| } else if (mask != 0x0) { | |
| expected = DPIO_ANYDL_POWERDOWN; | |
| } else { | |
| expected = 0; | |
| } | |
| if (ch == DPIO_CH0) | |
| actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH0; | |
| else | |
| actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH1; | |
| actual &= DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN; | |
| WARN(actual != expected, | |
| "Unexpected DPIO lane power down: all %d, any %d. Expected: all %d, any %d. (0x%x = 0x%08x)\n", | |
| !!(actual & DPIO_ALLDL_POWERDOWN), !!(actual & DPIO_ANYDL_POWERDOWN), | |
| !!(expected & DPIO_ALLDL_POWERDOWN), !!(expected & DPIO_ANYDL_POWERDOWN), | |
| reg, val); | |
| } | |
| bool chv_phy_powergate_ch(struct drm_i915_private *dev_priv, enum dpio_phy phy, | |
| enum dpio_channel ch, bool override) | |
| { | |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; | |
| bool was_override; | |
| mutex_lock(&power_domains->lock); | |
| was_override = dev_priv->chv_phy_control & PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); | |
| if (override == was_override) | |
| goto out; | |
| if (override) | |
| dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); | |
| else | |
| dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); | |
| I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control); | |
| DRM_DEBUG_KMS("Power gating DPIO PHY%d CH%d (DPIO_PHY_CONTROL=0x%08x)\n", | |
| phy, ch, dev_priv->chv_phy_control); | |
| assert_chv_phy_status(dev_priv); | |
| out: | |
| mutex_unlock(&power_domains->lock); | |
| return was_override; | |
| } | |
| void chv_phy_powergate_lanes(struct intel_encoder *encoder, | |
| bool override, unsigned int mask) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); | |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; | |
| enum dpio_phy phy = vlv_dport_to_phy(enc_to_dig_port(&encoder->base)); | |
| enum dpio_channel ch = vlv_dport_to_channel(enc_to_dig_port(&encoder->base)); | |
| mutex_lock(&power_domains->lock); | |
| dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD(0xf, phy, ch); | |
| dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD(mask, phy, ch); | |
| if (override) | |
| dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); | |
| else | |
| dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch); | |
| I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control); | |
| DRM_DEBUG_KMS("Power gating DPIO PHY%d CH%d lanes 0x%x (PHY_CONTROL=0x%08x)\n", | |
| phy, ch, mask, dev_priv->chv_phy_control); | |
| assert_chv_phy_status(dev_priv); | |
| assert_chv_phy_powergate(dev_priv, phy, ch, override, mask); | |
| mutex_unlock(&power_domains->lock); | |
| } | |
| static bool chv_pipe_power_well_enabled(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| enum pipe pipe = power_well->data; | |
| bool enabled; | |
| u32 state, ctrl; | |
| mutex_lock(&dev_priv->rps.hw_lock); | |
| state = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe); | |
| /* | |
| * We only ever set the power-on and power-gate states, anything | |
| * else is unexpected. | |
| */ | |
| WARN_ON(state != DP_SSS_PWR_ON(pipe) && state != DP_SSS_PWR_GATE(pipe)); | |
| enabled = state == DP_SSS_PWR_ON(pipe); | |
| /* | |
| * A transient state at this point would mean some unexpected party | |
| * is poking at the power controls too. | |
| */ | |
| ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSC_MASK(pipe); | |
| WARN_ON(ctrl << 16 != state); | |
| mutex_unlock(&dev_priv->rps.hw_lock); | |
| return enabled; | |
| } | |
| static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well, | |
| bool enable) | |
| { | |
| enum pipe pipe = power_well->data; | |
| u32 state; | |
| u32 ctrl; | |
| state = enable ? DP_SSS_PWR_ON(pipe) : DP_SSS_PWR_GATE(pipe); | |
| mutex_lock(&dev_priv->rps.hw_lock); | |
| #define COND \ | |
| ((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe)) == state) | |
| if (COND) | |
| goto out; | |
| ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); | |
| ctrl &= ~DP_SSC_MASK(pipe); | |
| ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe); | |
| vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, ctrl); | |
| if (wait_for(COND, 100)) | |
| DRM_ERROR("timeout setting power well state %08x (%08x)\n", | |
| state, | |
| vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ)); | |
| #undef COND | |
| out: | |
| mutex_unlock(&dev_priv->rps.hw_lock); | |
| } | |
| static void chv_pipe_power_well_sync_hw(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| WARN_ON_ONCE(power_well->data != PIPE_A); | |
| chv_set_pipe_power_well(dev_priv, power_well, power_well->count > 0); | |
| } | |
| static void chv_pipe_power_well_enable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| WARN_ON_ONCE(power_well->data != PIPE_A); | |
| chv_set_pipe_power_well(dev_priv, power_well, true); | |
| vlv_display_power_well_init(dev_priv); | |
| } | |
| static void chv_pipe_power_well_disable(struct drm_i915_private *dev_priv, | |
| struct i915_power_well *power_well) | |
| { | |
| WARN_ON_ONCE(power_well->data != PIPE_A); | |
| vlv_display_power_well_deinit(dev_priv); | |
| chv_set_pipe_power_well(dev_priv, power_well, false); | |
| } | |
| static void | |
| __intel_display_power_get_domain(struct drm_i915_private *dev_priv, | |
| enum intel_display_power_domain domain) | |
| { | |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; | |
| struct i915_power_well *power_well; | |
| int i; | |
| for_each_power_well(i, power_well, BIT(domain), power_domains) { | |
| if (!power_well->count++) | |
| intel_power_well_enable(dev_priv, power_well); | |
| } | |
| power_domains->domain_use_count[domain]++; | |
| } | |
| /** | |
| * intel_display_power_get - grab a power domain reference | |
| * @dev_priv: i915 device instance | |
| * @domain: power domain to reference | |
| * | |
| * This function grabs a power domain reference for @domain and ensures that the | |
| * power domain and all its parents are powered up. Therefore users should only | |
| * grab a reference to the innermost power domain they need. | |
| * | |
| * Any power domain reference obtained by this function must have a symmetric | |
| * call to intel_display_power_put() to release the reference again. | |
| */ | |
| void intel_display_power_get(struct drm_i915_private *dev_priv, | |
| enum intel_display_power_domain domain) | |
| { | |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; | |
| intel_runtime_pm_get(dev_priv); | |
| mutex_lock(&power_domains->lock); | |
| __intel_display_power_get_domain(dev_priv, domain); | |
| mutex_unlock(&power_domains->lock); | |
| } | |
| /** | |
| * intel_display_power_get_if_enabled - grab a reference for an enabled display power domain | |
| * @dev_priv: i915 device instance | |
| * @domain: power domain to reference | |
| * | |
| * This function grabs a power domain reference for @domain and ensures that the | |
| * power domain and all its parents are powered up. Therefore users should only | |
| * grab a reference to the innermost power domain they need. | |
| * | |
| * Any power domain reference obtained by this function must have a symmetric | |
| * call to intel_display_power_put() to release the reference again. | |
| */ | |
| bool intel_display_power_get_if_enabled(struct drm_i915_private *dev_priv, | |
| enum intel_display_power_domain domain) | |
| { | |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; | |
| bool is_enabled; | |
| if (!intel_runtime_pm_get_if_in_use(dev_priv)) | |
| return false; | |
| mutex_lock(&power_domains->lock); | |
| if (__intel_display_power_is_enabled(dev_priv, domain)) { | |
| __intel_display_power_get_domain(dev_priv, domain); | |
| is_enabled = true; | |
| } else { | |
| is_enabled = false; | |
| } | |
| mutex_unlock(&power_domains->lock); | |
| if (!is_enabled) | |
| intel_runtime_pm_put(dev_priv); | |
| return is_enabled; | |
| } | |
| /** | |
| * intel_display_power_put - release a power domain reference | |
| * @dev_priv: i915 device instance | |
| * @domain: power domain to reference | |
| * | |
| * This function drops the power domain reference obtained by | |
| * intel_display_power_get() and might power down the corresponding hardware | |
| * block right away if this is the last reference. | |
| */ | |
| void intel_display_power_put(struct drm_i915_private *dev_priv, | |
| enum intel_display_power_domain domain) | |
| { | |
| struct i915_power_domains *power_domains; | |
| struct i915_power_well *power_well; | |
| int i; | |
| power_domains = &dev_priv->power_domains; | |
| mutex_lock(&power_domains->lock); | |
| WARN(!power_domains->domain_use_count[domain], | |
| "Use count on domain %s is already zero\n", | |
| intel_display_power_domain_str(domain)); | |
| power_domains->domain_use_count[domain]--; | |
| for_each_power_well_rev(i, power_well, BIT(domain), power_domains) { | |
| WARN(!power_well->count, | |
| "Use count on power well %s is already zero", | |
| power_well->name); | |
| if (!--power_well->count) | |
| intel_power_well_disable(dev_priv, power_well); | |
| } | |
| mutex_unlock(&power_domains->lock); | |
| intel_runtime_pm_put(dev_priv); | |
| } | |
| #define HSW_ALWAYS_ON_POWER_DOMAINS ( \ | |
| BIT(POWER_DOMAIN_PIPE_A) | \ | |
| BIT(POWER_DOMAIN_TRANSCODER_EDP) | \ | |
| BIT(POWER_DOMAIN_PORT_DDI_A_LANES) | \ | |
| BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \ | |
| BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \ | |
| BIT(POWER_DOMAIN_PORT_DDI_D_LANES) | \ | |
| BIT(POWER_DOMAIN_PORT_CRT) | \ | |
| BIT(POWER_DOMAIN_PLLS) | \ | |
| BIT(POWER_DOMAIN_AUX_A) | \ | |
| BIT(POWER_DOMAIN_AUX_B) | \ | |
| BIT(POWER_DOMAIN_AUX_C) | \ | |
| BIT(POWER_DOMAIN_AUX_D) | \ | |
| BIT(POWER_DOMAIN_GMBUS) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define HSW_DISPLAY_POWER_DOMAINS ( \ | |
| (POWER_DOMAIN_MASK & ~HSW_ALWAYS_ON_POWER_DOMAINS) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define BDW_ALWAYS_ON_POWER_DOMAINS ( \ | |
| HSW_ALWAYS_ON_POWER_DOMAINS | \ | |
| BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER)) | |
| #define BDW_DISPLAY_POWER_DOMAINS ( \ | |
| (POWER_DOMAIN_MASK & ~BDW_ALWAYS_ON_POWER_DOMAINS) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define VLV_ALWAYS_ON_POWER_DOMAINS BIT(POWER_DOMAIN_INIT) | |
| #define VLV_DISPLAY_POWER_DOMAINS POWER_DOMAIN_MASK | |
| #define VLV_DPIO_CMN_BC_POWER_DOMAINS ( \ | |
| BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \ | |
| BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \ | |
| BIT(POWER_DOMAIN_PORT_CRT) | \ | |
| BIT(POWER_DOMAIN_AUX_B) | \ | |
| BIT(POWER_DOMAIN_AUX_C) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS ( \ | |
| BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \ | |
| BIT(POWER_DOMAIN_AUX_B) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS ( \ | |
| BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \ | |
| BIT(POWER_DOMAIN_AUX_B) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS ( \ | |
| BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \ | |
| BIT(POWER_DOMAIN_AUX_C) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS ( \ | |
| BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \ | |
| BIT(POWER_DOMAIN_AUX_C) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define CHV_DPIO_CMN_BC_POWER_DOMAINS ( \ | |
| BIT(POWER_DOMAIN_PORT_DDI_B_LANES) | \ | |
| BIT(POWER_DOMAIN_PORT_DDI_C_LANES) | \ | |
| BIT(POWER_DOMAIN_AUX_B) | \ | |
| BIT(POWER_DOMAIN_AUX_C) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| #define CHV_DPIO_CMN_D_POWER_DOMAINS ( \ | |
| BIT(POWER_DOMAIN_PORT_DDI_D_LANES) | \ | |
| BIT(POWER_DOMAIN_AUX_D) | \ | |
| BIT(POWER_DOMAIN_INIT)) | |
| static const struct i915_power_well_ops i9xx_always_on_power_well_ops = { | |
| .sync_hw = i9xx_always_on_power_well_noop, | |
| .enable = i9xx_always_on_power_well_noop, | |
| .disable = i9xx_always_on_power_well_noop, | |
| .is_enabled = i9xx_always_on_power_well_enabled, | |
| }; | |
| static const struct i915_power_well_ops chv_pipe_power_well_ops = { | |
| .sync_hw = chv_pipe_power_well_sync_hw, | |
| .enable = chv_pipe_power_well_enable, | |
| .disable = chv_pipe_power_well_disable, | |
| .is_enabled = chv_pipe_power_well_enabled, | |
| }; | |
| static const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = { | |
| .sync_hw = vlv_power_well_sync_hw, | |
| .enable = chv_dpio_cmn_power_well_enable, | |
| .disable = chv_dpio_cmn_power_well_disable, | |
| .is_enabled = vlv_power_well_enabled, | |
| }; | |
| static struct i915_power_well i9xx_always_on_power_well[] = { | |
| { | |
| .name = "always-on", | |
| .always_on = 1, | |
| .domains = POWER_DOMAIN_MASK, | |
| .ops = &i9xx_always_on_power_well_ops, | |
| }, | |
| }; | |
| static const struct i915_power_well_ops hsw_power_well_ops = { | |
| .sync_hw = hsw_power_well_sync_hw, | |
| .enable = hsw_power_well_enable, | |
| .disable = hsw_power_well_disable, | |
| .is_enabled = hsw_power_well_enabled, | |
| }; | |
| static const struct i915_power_well_ops skl_power_well_ops = { | |
| .sync_hw = skl_power_well_sync_hw, | |
| .enable = skl_power_well_enable, | |
| .disable = skl_power_well_disable, | |
| .is_enabled = skl_power_well_enabled, | |
| }; | |
| static const struct i915_power_well_ops gen9_dc_off_power_well_ops = { | |
| .sync_hw = gen9_dc_off_power_well_sync_hw, | |
| .enable = gen9_dc_off_power_well_enable, | |
| .disable = gen9_dc_off_power_well_disable, | |
| .is_enabled = gen9_dc_off_power_well_enabled, | |
| }; | |
| static struct i915_power_well hsw_power_wells[] = { | |
| { | |
| .name = "always-on", | |
| .always_on = 1, | |
| .domains = HSW_ALWAYS_ON_POWER_DOMAINS, | |
| .ops = &i9xx_always_on_power_well_ops, | |
| }, | |
| { | |
| .name = "display", | |
| .domains = HSW_DISPLAY_POWER_DOMAINS, | |
| .ops = &hsw_power_well_ops, | |
| }, | |
| }; | |
| static struct i915_power_well bdw_power_wells[] = { | |
| { | |
| .name = "always-on", | |
| .always_on = 1, | |
| .domains = BDW_ALWAYS_ON_POWER_DOMAINS, | |
| .ops = &i9xx_always_on_power_well_ops, | |
| }, | |
| { | |
| .name = "display", | |
| .domains = BDW_DISPLAY_POWER_DOMAINS, | |
| .ops = &hsw_power_well_ops, | |
| }, | |
| }; | |
| static const struct i915_power_well_ops vlv_display_power_well_ops = { | |
| .sync_hw = vlv_power_well_sync_hw, | |
| .enable = vlv_display_power_well_enable, | |
| .disable = vlv_display_power_well_disable, | |
| .is_enabled = vlv_power_well_enabled, | |
| }; | |
| static const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops = { | |
| .sync_hw = vlv_power_well_sync_hw, | |
| .enable = vlv_dpio_cmn_power_well_enable, | |
| .disable = vlv_dpio_cmn_power_well_disable, | |
| .is_enabled = vlv_power_well_enabled, | |
| }; | |
| static const struct i915_power_well_ops vlv_dpio_power_well_ops = { | |
| .sync_hw = vlv_power_well_sync_hw, | |
| .enable = vlv_power_well_enable, | |
| .disable = vlv_power_well_disable, | |
| .is_enabled = vlv_power_well_enabled, | |
| }; | |
| static struct i915_power_well vlv_power_wells[] = { | |
| { | |
| .name = "always-on", | |
| .always_on = 1, | |
| .domains = VLV_ALWAYS_ON_POWER_DOMAINS, | |
| .ops = &i9xx_always_on_power_well_ops, | |
| .data = PUNIT_POWER_WELL_ALWAYS_ON, | |
| }, | |
| { | |
| .name = "display", | |
| .domains = VLV_DISPLAY_POWER_DOMAINS, | |
| .data = PUNIT_POWER_WELL_DISP2D, | |
| .ops = &vlv_display_power_well_ops, | |
| }, | |
| { | |
| .name = "dpio-tx-b-01", | |
| .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | | |
| VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | | |
| VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | | |
| VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, | |
| .ops = &vlv_dpio_power_well_ops, | |
| .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01, | |
| }, | |
| { | |
| .name = "dpio-tx-b-23", | |
| .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | | |
| VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | | |
| VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | | |
| VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, | |
| .ops = &vlv_dpio_power_well_ops, | |
| .data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23, | |
| }, | |
| { | |
| .name = "dpio-tx-c-01", | |
| .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | | |
| VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | | |
| VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | | |
| VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, | |
| .ops = &vlv_dpio_power_well_ops, | |
| .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01, | |
| }, | |
| { | |
| .name = "dpio-tx-c-23", | |
| .domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS | | |
| VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS | | |
| VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS | | |
| VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS, | |
| .ops = &vlv_dpio_power_well_ops, | |
| .data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23, | |
| }, | |
| { | |
| .name = "dpio-common", | |
| .domains = VLV_DPIO_CMN_BC_POWER_DOMAINS, | |
| .data = PUNIT_POWER_WELL_DPIO_CMN_BC, | |
| .ops = &vlv_dpio_cmn_power_well_ops, | |
| }, | |
| }; | |
| static struct i915_power_well chv_power_wells[] = { | |
| { | |
| .name = "always-on", | |
| .always_on = 1, | |
| .domains = VLV_ALWAYS_ON_POWER_DOMAINS, | |
| .ops = &i9xx_always_on_power_well_ops, | |
| }, | |
| { | |
| .name = "display", | |
| /* | |
| * Pipe A power well is the new disp2d well. Pipe B and C | |
| * power wells don't actually exist. Pipe A power well is | |
| * required for any pipe to work. | |
| */ | |
| .domains = VLV_DISPLAY_POWER_DOMAINS, | |
| .data = PIPE_A, | |
| .ops = &chv_pipe_power_well_ops, | |
| }, | |
| { | |
| .name = "dpio-common-bc", | |
| .domains = CHV_DPIO_CMN_BC_POWER_DOMAINS, | |
| .data = PUNIT_POWER_WELL_DPIO_CMN_BC, | |
| .ops = &chv_dpio_cmn_power_well_ops, | |
| }, | |
| { | |
| .name = "dpio-common-d", | |
| .domains = CHV_DPIO_CMN_D_POWER_DOMAINS, | |
| .data = PUNIT_POWER_WELL_DPIO_CMN_D, | |
| .ops = &chv_dpio_cmn_power_well_ops, | |
| }, | |
| }; | |
| bool intel_display_power_well_is_enabled(struct drm_i915_private *dev_priv, | |
| int power_well_id) | |
| { | |
| struct i915_power_well *power_well; | |
| bool ret; | |
| power_well = lookup_power_well(dev_priv, power_well_id); | |
| ret = power_well->ops->is_enabled(dev_priv, power_well); | |
| return ret; | |
| } | |
| static struct i915_power_well skl_power_wells[] = { | |
| { | |
| .name = "always-on", | |
| .always_on = 1, | |
| .domains = SKL_DISPLAY_ALWAYS_ON_POWER_DOMAINS, | |
| .ops = &i9xx_always_on_power_well_ops, | |
| .data = SKL_DISP_PW_ALWAYS_ON, | |
| }, | |
| { | |
| .name = "power well 1", | |
| /* Handled by the DMC firmware */ | |
| .domains = 0, | |
| .ops = &skl_power_well_ops, | |
| .data = SKL_DISP_PW_1, | |
| }, | |
| { | |
| .name = "MISC IO power well", | |
| /* Handled by the DMC firmware */ | |
| .domains = 0, | |
| .ops = &skl_power_well_ops, | |
| .data = SKL_DISP_PW_MISC_IO, | |
| }, | |
| { | |
| .name = "DC off", | |
| .domains = SKL_DISPLAY_DC_OFF_POWER_DOMAINS, | |
| .ops = &gen9_dc_off_power_well_ops, | |
| .data = SKL_DISP_PW_DC_OFF, | |
| }, | |
| { | |
| .name = "power well 2", | |
| .domains = SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS, | |
| .ops = &skl_power_well_ops, | |
| .data = SKL_DISP_PW_2, | |
| }, | |
| { | |
| .name = "DDI A/E power well", | |
| .domains = SKL_DISPLAY_DDI_A_E_POWER_DOMAINS, | |
| .ops = &skl_power_well_ops, | |
| .data = SKL_DISP_PW_DDI_A_E, | |
| }, | |
| { | |
| .name = "DDI B power well", | |
| .domains = SKL_DISPLAY_DDI_B_POWER_DOMAINS, | |
| .ops = &skl_power_well_ops, | |
| .data = SKL_DISP_PW_DDI_B, | |
| }, | |
| { | |
| .name = "DDI C power well", | |
| .domains = SKL_DISPLAY_DDI_C_POWER_DOMAINS, | |
| .ops = &skl_power_well_ops, | |
| .data = SKL_DISP_PW_DDI_C, | |
| }, | |
| { | |
| .name = "DDI D power well", | |
| .domains = SKL_DISPLAY_DDI_D_POWER_DOMAINS, | |
| .ops = &skl_power_well_ops, | |
| .data = SKL_DISP_PW_DDI_D, | |
| }, | |
| }; | |
| void skl_pw1_misc_io_init(struct drm_i915_private *dev_priv) | |
| { | |
| struct i915_power_well *well; | |
| if (!(IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))) | |
| return; | |
| well = lookup_power_well(dev_priv, SKL_DISP_PW_1); | |
| intel_power_well_enable(dev_priv, well); | |
| well = lookup_power_well(dev_priv, SKL_DISP_PW_MISC_IO); | |
| intel_power_well_enable(dev_priv, well); | |
| } | |
| void skl_pw1_misc_io_fini(struct drm_i915_private *dev_priv) | |
| { | |
| struct i915_power_well *well; | |
| if (!(IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))) | |
| return; | |
| well = lookup_power_well(dev_priv, SKL_DISP_PW_1); | |
| intel_power_well_disable(dev_priv, well); | |
| well = lookup_power_well(dev_priv, SKL_DISP_PW_MISC_IO); | |
| intel_power_well_disable(dev_priv, well); | |
| } | |
| static struct i915_power_well bxt_power_wells[] = { | |
| { | |
| .name = "always-on", | |
| .always_on = 1, | |
| .domains = BXT_DISPLAY_ALWAYS_ON_POWER_DOMAINS, | |
| .ops = &i9xx_always_on_power_well_ops, | |
| }, | |
| { | |
| .name = "power well 1", | |
| .domains = BXT_DISPLAY_POWERWELL_1_POWER_DOMAINS, | |
| .ops = &skl_power_well_ops, | |
| .data = SKL_DISP_PW_1, | |
| }, | |
| { | |
| .name = "DC off", | |
| .domains = BXT_DISPLAY_DC_OFF_POWER_DOMAINS, | |
| .ops = &gen9_dc_off_power_well_ops, | |
| .data = SKL_DISP_PW_DC_OFF, | |
| }, | |
| { | |
| .name = "power well 2", | |
| .domains = BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS, | |
| .ops = &skl_power_well_ops, | |
| .data = SKL_DISP_PW_2, | |
| }, | |
| }; | |
| static int | |
| sanitize_disable_power_well_option(const struct drm_i915_private *dev_priv, | |
| int disable_power_well) | |
| { | |
| if (disable_power_well >= 0) | |
| return !!disable_power_well; | |
| if (IS_BROXTON(dev_priv)) { | |
| DRM_DEBUG_KMS("Disabling display power well support\n"); | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| #define set_power_wells(power_domains, __power_wells) ({ \ | |
| (power_domains)->power_wells = (__power_wells); \ | |
| (power_domains)->power_well_count = ARRAY_SIZE(__power_wells); \ | |
| }) | |
| /** | |
| * intel_power_domains_init - initializes the power domain structures | |
| * @dev_priv: i915 device instance | |
| * | |
| * Initializes the power domain structures for @dev_priv depending upon the | |
| * supported platform. | |
| */ | |
| int intel_power_domains_init(struct drm_i915_private *dev_priv) | |
| { | |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; | |
| i915.disable_power_well = sanitize_disable_power_well_option(dev_priv, | |
| i915.disable_power_well); | |
| BUILD_BUG_ON(POWER_DOMAIN_NUM > 31); | |
| mutex_init(&power_domains->lock); | |
| /* | |
| * The enabling order will be from lower to higher indexed wells, | |
| * the disabling order is reversed. | |
| */ | |
| if (IS_HASWELL(dev_priv->dev)) { | |
| set_power_wells(power_domains, hsw_power_wells); | |
| } else if (IS_BROADWELL(dev_priv->dev)) { | |
| set_power_wells(power_domains, bdw_power_wells); | |
| } else if (IS_SKYLAKE(dev_priv->dev) || IS_KABYLAKE(dev_priv->dev)) { | |
| set_power_wells(power_domains, skl_power_wells); | |
| } else if (IS_BROXTON(dev_priv->dev)) { | |
| set_power_wells(power_domains, bxt_power_wells); | |
| } else if (IS_CHERRYVIEW(dev_priv->dev)) { | |
| set_power_wells(power_domains, chv_power_wells); | |
| } else if (IS_VALLEYVIEW(dev_priv->dev)) { | |
| set_power_wells(power_domains, vlv_power_wells); | |
| } else { | |
| set_power_wells(power_domains, i9xx_always_on_power_well); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * intel_power_domains_fini - finalizes the power domain structures | |
| * @dev_priv: i915 device instance | |
| * | |
| * Finalizes the power domain structures for @dev_priv depending upon the | |
| * supported platform. This function also disables runtime pm and ensures that | |
| * the device stays powered up so that the driver can be reloaded. | |
| */ | |
| void intel_power_domains_fini(struct drm_i915_private *dev_priv) | |
| { | |
| struct device *device = &dev_priv->dev->pdev->dev; | |
| /* | |
| * The i915.ko module is still not prepared to be loaded when | |
| * the power well is not enabled, so just enable it in case | |
| * we're going to unload/reload. | |
| * The following also reacquires the RPM reference the core passed | |
| * to the driver during loading, which is dropped in | |
| * intel_runtime_pm_enable(). We have to hand back the control of the | |
| * device to the core with this reference held. | |
| */ | |
| intel_display_set_init_power(dev_priv, true); | |
| /* Remove the refcount we took to keep power well support disabled. */ | |
| if (!i915.disable_power_well) | |
| intel_display_power_put(dev_priv, POWER_DOMAIN_INIT); | |
| /* | |
| * Remove the refcount we took in intel_runtime_pm_enable() in case | |
| * the platform doesn't support runtime PM. | |
| */ | |
| if (!HAS_RUNTIME_PM(dev_priv)) | |
| pm_runtime_put(device); | |
| } | |
| static void intel_power_domains_sync_hw(struct drm_i915_private *dev_priv) | |
| { | |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; | |
| struct i915_power_well *power_well; | |
| int i; | |
| mutex_lock(&power_domains->lock); | |
| for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) { | |
| power_well->ops->sync_hw(dev_priv, power_well); | |
| power_well->hw_enabled = power_well->ops->is_enabled(dev_priv, | |
| power_well); | |
| } | |
| mutex_unlock(&power_domains->lock); | |
| } | |
| static void skl_display_core_init(struct drm_i915_private *dev_priv, | |
| bool resume) | |
| { | |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; | |
| uint32_t val; | |
| gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); | |
| /* enable PCH reset handshake */ | |
| val = I915_READ(HSW_NDE_RSTWRN_OPT); | |
| I915_WRITE(HSW_NDE_RSTWRN_OPT, val | RESET_PCH_HANDSHAKE_ENABLE); | |
| /* enable PG1 and Misc I/O */ | |
| mutex_lock(&power_domains->lock); | |
| skl_pw1_misc_io_init(dev_priv); | |
| mutex_unlock(&power_domains->lock); | |
| if (!resume) | |
| return; | |
| skl_init_cdclk(dev_priv); | |
| if (dev_priv->csr.dmc_payload && intel_csr_load_program(dev_priv)) | |
| gen9_set_dc_state_debugmask(dev_priv); | |
| } | |
| static void skl_display_core_uninit(struct drm_i915_private *dev_priv) | |
| { | |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; | |
| gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); | |
| skl_uninit_cdclk(dev_priv); | |
| /* The spec doesn't call for removing the reset handshake flag */ | |
| /* disable PG1 and Misc I/O */ | |
| mutex_lock(&power_domains->lock); | |
| skl_pw1_misc_io_fini(dev_priv); | |
| mutex_unlock(&power_domains->lock); | |
| } | |
| static void chv_phy_control_init(struct drm_i915_private *dev_priv) | |
| { | |
| struct i915_power_well *cmn_bc = | |
| lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC); | |
| struct i915_power_well *cmn_d = | |
| lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_D); | |
| /* | |
| * DISPLAY_PHY_CONTROL can get corrupted if read. As a | |
| * workaround never ever read DISPLAY_PHY_CONTROL, and | |
| * instead maintain a shadow copy ourselves. Use the actual | |
| * power well state and lane status to reconstruct the | |
| * expected initial value. | |
| */ | |
| dev_priv->chv_phy_control = | |
| PHY_LDO_SEQ_DELAY(PHY_LDO_DELAY_600NS, DPIO_PHY0) | | |
| PHY_LDO_SEQ_DELAY(PHY_LDO_DELAY_600NS, DPIO_PHY1) | | |
| PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY0, DPIO_CH0) | | |
| PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY0, DPIO_CH1) | | |
| PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY1, DPIO_CH0); | |
| /* | |
| * If all lanes are disabled we leave the override disabled | |
| * with all power down bits cleared to match the state we | |
| * would use after disabling the port. Otherwise enable the | |
| * override and set the lane powerdown bits accding to the | |
| * current lane status. | |
| */ | |
| if (cmn_bc->ops->is_enabled(dev_priv, cmn_bc)) { | |
| uint32_t status = I915_READ(DPLL(PIPE_A)); | |
| unsigned int mask; | |
| mask = status & DPLL_PORTB_READY_MASK; | |
| if (mask == 0xf) | |
| mask = 0x0; | |
| else | |
| dev_priv->chv_phy_control |= | |
| PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH0); | |
| dev_priv->chv_phy_control |= | |
| PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY0, DPIO_CH0); | |
| mask = (status & DPLL_PORTC_READY_MASK) >> 4; | |
| if (mask == 0xf) | |
| mask = 0x0; | |
| else | |
| dev_priv->chv_phy_control |= | |
| PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH1); | |
| dev_priv->chv_phy_control |= | |
| PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY0, DPIO_CH1); | |
| dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(DPIO_PHY0); | |
| dev_priv->chv_phy_assert[DPIO_PHY0] = false; | |
| } else { | |
| dev_priv->chv_phy_assert[DPIO_PHY0] = true; | |
| } | |
| if (cmn_d->ops->is_enabled(dev_priv, cmn_d)) { | |
| uint32_t status = I915_READ(DPIO_PHY_STATUS); | |
| unsigned int mask; | |
| mask = status & DPLL_PORTD_READY_MASK; | |
| if (mask == 0xf) | |
| mask = 0x0; | |
| else | |
| dev_priv->chv_phy_control |= | |
| PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY1, DPIO_CH0); | |
| dev_priv->chv_phy_control |= | |
| PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY1, DPIO_CH0); | |
| dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(DPIO_PHY1); | |
| dev_priv->chv_phy_assert[DPIO_PHY1] = false; | |
| } else { | |
| dev_priv->chv_phy_assert[DPIO_PHY1] = true; | |
| } | |
| I915_WRITE(DISPLAY_PHY_CONTROL, dev_priv->chv_phy_control); | |
| DRM_DEBUG_KMS("Initial PHY_CONTROL=0x%08x\n", | |
| dev_priv->chv_phy_control); | |
| } | |
| static void vlv_cmnlane_wa(struct drm_i915_private *dev_priv) | |
| { | |
| struct i915_power_well *cmn = | |
| lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC); | |
| struct i915_power_well *disp2d = | |
| lookup_power_well(dev_priv, PUNIT_POWER_WELL_DISP2D); | |
| /* If the display might be already active skip this */ | |
| if (cmn->ops->is_enabled(dev_priv, cmn) && | |
| disp2d->ops->is_enabled(dev_priv, disp2d) && | |
| I915_READ(DPIO_CTL) & DPIO_CMNRST) | |
| return; | |
| DRM_DEBUG_KMS("toggling display PHY side reset\n"); | |
| /* cmnlane needs DPLL registers */ | |
| disp2d->ops->enable(dev_priv, disp2d); | |
| /* | |
| * From VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_11.docx: | |
| * Need to assert and de-assert PHY SB reset by gating the | |
| * common lane power, then un-gating it. | |
| * Simply ungating isn't enough to reset the PHY enough to get | |
| * ports and lanes running. | |
| */ | |
| cmn->ops->disable(dev_priv, cmn); | |
| } | |
| /** | |
| * intel_power_domains_init_hw - initialize hardware power domain state | |
| * @dev_priv: i915 device instance | |
| * | |
| * This function initializes the hardware power domain state and enables all | |
| * power domains using intel_display_set_init_power(). | |
| */ | |
| void intel_power_domains_init_hw(struct drm_i915_private *dev_priv, bool resume) | |
| { | |
| struct drm_device *dev = dev_priv->dev; | |
| struct i915_power_domains *power_domains = &dev_priv->power_domains; | |
| power_domains->initializing = true; | |
| if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) { | |
| skl_display_core_init(dev_priv, resume); | |
| } else if (IS_CHERRYVIEW(dev)) { | |
| mutex_lock(&power_domains->lock); | |
| chv_phy_control_init(dev_priv); | |
| mutex_unlock(&power_domains->lock); | |
| } else if (IS_VALLEYVIEW(dev)) { | |
| mutex_lock(&power_domains->lock); | |
| vlv_cmnlane_wa(dev_priv); | |
| mutex_unlock(&power_domains->lock); | |
| } | |
| /* For now, we need the power well to be always enabled. */ | |
| intel_display_set_init_power(dev_priv, true); | |
| /* Disable power support if the user asked so. */ | |
| if (!i915.disable_power_well) | |
| intel_display_power_get(dev_priv, POWER_DOMAIN_INIT); | |
| intel_power_domains_sync_hw(dev_priv); | |
| power_domains->initializing = false; | |
| } | |
| /** | |
| * intel_power_domains_suspend - suspend power domain state | |
| * @dev_priv: i915 device instance | |
| * | |
| * This function prepares the hardware power domain state before entering | |
| * system suspend. It must be paired with intel_power_domains_init_hw(). | |
| */ | |
| void intel_power_domains_suspend(struct drm_i915_private *dev_priv) | |
| { | |
| /* | |
| * Even if power well support was disabled we still want to disable | |
| * power wells while we are system suspended. | |
| */ | |
| if (!i915.disable_power_well) | |
| intel_display_power_put(dev_priv, POWER_DOMAIN_INIT); | |
| if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) | |
| skl_display_core_uninit(dev_priv); | |
| } | |
| /** | |
| * intel_runtime_pm_get - grab a runtime pm reference | |
| * @dev_priv: i915 device instance | |
| * | |
| * This function grabs a device-level runtime pm reference (mostly used for GEM | |
| * code to ensure the GTT or GT is on) and ensures that it is powered up. | |
| * | |
| * Any runtime pm reference obtained by this function must have a symmetric | |
| * call to intel_runtime_pm_put() to release the reference again. | |
| */ | |
| void intel_runtime_pm_get(struct drm_i915_private *dev_priv) | |
| { | |
| struct drm_device *dev = dev_priv->dev; | |
| struct device *device = &dev->pdev->dev; | |
| pm_runtime_get_sync(device); | |
| atomic_inc(&dev_priv->pm.wakeref_count); | |
| assert_rpm_wakelock_held(dev_priv); | |
| } | |
| /** | |
| * intel_runtime_pm_get_if_in_use - grab a runtime pm reference if device in use | |
| * @dev_priv: i915 device instance | |
| * | |
| * This function grabs a device-level runtime pm reference if the device is | |
| * already in use and ensures that it is powered up. | |
| * | |
| * Any runtime pm reference obtained by this function must have a symmetric | |
| * call to intel_runtime_pm_put() to release the reference again. | |
| */ | |
| bool intel_runtime_pm_get_if_in_use(struct drm_i915_private *dev_priv) | |
| { | |
| struct drm_device *dev = dev_priv->dev; | |
| struct device *device = &dev->pdev->dev; | |
| if (IS_ENABLED(CONFIG_PM)) { | |
| int ret = pm_runtime_get_if_in_use(device); | |
| /* | |
| * In cases runtime PM is disabled by the RPM core and we get | |
| * an -EINVAL return value we are not supposed to call this | |
| * function, since the power state is undefined. This applies | |
| * atm to the late/early system suspend/resume handlers. | |
| */ | |
| WARN_ON_ONCE(ret < 0); | |
| if (ret <= 0) | |
| return false; | |
| } | |
| atomic_inc(&dev_priv->pm.wakeref_count); | |
| assert_rpm_wakelock_held(dev_priv); | |
| return true; | |
| } | |
| /** | |
| * intel_runtime_pm_get_noresume - grab a runtime pm reference | |
| * @dev_priv: i915 device instance | |
| * | |
| * This function grabs a device-level runtime pm reference (mostly used for GEM | |
| * code to ensure the GTT or GT is on). | |
| * | |
| * It will _not_ power up the device but instead only check that it's powered | |
| * on. Therefore it is only valid to call this functions from contexts where | |
| * the device is known to be powered up and where trying to power it up would | |
| * result in hilarity and deadlocks. That pretty much means only the system | |
| * suspend/resume code where this is used to grab runtime pm references for | |
| * delayed setup down in work items. | |
| * | |
| * Any runtime pm reference obtained by this function must have a symmetric | |
| * call to intel_runtime_pm_put() to release the reference again. | |
| */ | |
| void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv) | |
| { | |
| struct drm_device *dev = dev_priv->dev; | |
| struct device *device = &dev->pdev->dev; | |
| assert_rpm_wakelock_held(dev_priv); | |
| pm_runtime_get_noresume(device); | |
| atomic_inc(&dev_priv->pm.wakeref_count); | |
| } | |
| /** | |
| * intel_runtime_pm_put - release a runtime pm reference | |
| * @dev_priv: i915 device instance | |
| * | |
| * This function drops the device-level runtime pm reference obtained by | |
| * intel_runtime_pm_get() and might power down the corresponding | |
| * hardware block right away if this is the last reference. | |
| */ | |
| void intel_runtime_pm_put(struct drm_i915_private *dev_priv) | |
| { | |
| struct drm_device *dev = dev_priv->dev; | |
| struct device *device = &dev->pdev->dev; | |
| assert_rpm_wakelock_held(dev_priv); | |
| if (atomic_dec_and_test(&dev_priv->pm.wakeref_count)) | |
| atomic_inc(&dev_priv->pm.atomic_seq); | |
| pm_runtime_mark_last_busy(device); | |
| pm_runtime_put_autosuspend(device); | |
| } | |
| /** | |
| * intel_runtime_pm_enable - enable runtime pm | |
| * @dev_priv: i915 device instance | |
| * | |
| * This function enables runtime pm at the end of the driver load sequence. | |
| * | |
| * Note that this function does currently not enable runtime pm for the | |
| * subordinate display power domains. That is only done on the first modeset | |
| * using intel_display_set_init_power(). | |
| */ | |
| void intel_runtime_pm_enable(struct drm_i915_private *dev_priv) | |
| { | |
| struct drm_device *dev = dev_priv->dev; | |
| struct device *device = &dev->pdev->dev; | |
| pm_runtime_set_autosuspend_delay(device, 10000); /* 10s */ | |
| pm_runtime_mark_last_busy(device); | |
| /* | |
| * Take a permanent reference to disable the RPM functionality and drop | |
| * it only when unloading the driver. Use the low level get/put helpers, | |
| * so the driver's own RPM reference tracking asserts also work on | |
| * platforms without RPM support. | |
| */ | |
| if (!HAS_RUNTIME_PM(dev)) { | |
| pm_runtime_dont_use_autosuspend(device); | |
| pm_runtime_get_sync(device); | |
| } else { | |
| pm_runtime_use_autosuspend(device); | |
| } | |
| /* | |
| * The core calls the driver load handler with an RPM reference held. | |
| * We drop that here and will reacquire it during unloading in | |
| * intel_power_domains_fini(). | |
| */ | |
| pm_runtime_put_autosuspend(device); | |
| } | |