| /* $Id: setup.c,v 1.126 2001/11/13 00:49:27 davem Exp $ | |
| * linux/arch/sparc/kernel/setup.c | |
| * | |
| * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) | |
| * Copyright (C) 2000 Anton Blanchard (anton@samba.org) | |
| */ | |
| #include <linux/errno.h> | |
| #include <linux/sched.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/stddef.h> | |
| #include <linux/unistd.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/slab.h> | |
| #include <linux/initrd.h> | |
| #include <asm/smp.h> | |
| #include <linux/user.h> | |
| #include <linux/a.out.h> | |
| #include <linux/screen_info.h> | |
| #include <linux/delay.h> | |
| #include <linux/fs.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/syscalls.h> | |
| #include <linux/kdev_t.h> | |
| #include <linux/major.h> | |
| #include <linux/string.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/console.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/root_dev.h> | |
| #include <linux/cpu.h> | |
| #include <linux/kdebug.h> | |
| #include <asm/system.h> | |
| #include <asm/io.h> | |
| #include <asm/processor.h> | |
| #include <asm/oplib.h> | |
| #include <asm/page.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/traps.h> | |
| #include <asm/vaddrs.h> | |
| #include <asm/mbus.h> | |
| #include <asm/idprom.h> | |
| #include <asm/machines.h> | |
| #include <asm/cpudata.h> | |
| #include <asm/setup.h> | |
| struct screen_info screen_info = { | |
| 0, 0, /* orig-x, orig-y */ | |
| 0, /* unused */ | |
| 0, /* orig-video-page */ | |
| 0, /* orig-video-mode */ | |
| 128, /* orig-video-cols */ | |
| 0,0,0, /* ega_ax, ega_bx, ega_cx */ | |
| 54, /* orig-video-lines */ | |
| 0, /* orig-video-isVGA */ | |
| 16 /* orig-video-points */ | |
| }; | |
| /* Typing sync at the prom prompt calls the function pointed to by | |
| * romvec->pv_synchook which I set to the following function. | |
| * This should sync all filesystems and return, for now it just | |
| * prints out pretty messages and returns. | |
| */ | |
| extern unsigned long trapbase; | |
| void (*prom_palette)(int); | |
| /* Pretty sick eh? */ | |
| void prom_sync_me(void) | |
| { | |
| unsigned long prom_tbr, flags; | |
| /* XXX Badly broken. FIX! - Anton */ | |
| local_irq_save(flags); | |
| __asm__ __volatile__("rd %%tbr, %0\n\t" : "=r" (prom_tbr)); | |
| __asm__ __volatile__("wr %0, 0x0, %%tbr\n\t" | |
| "nop\n\t" | |
| "nop\n\t" | |
| "nop\n\t" : : "r" (&trapbase)); | |
| if (prom_palette) | |
| prom_palette(1); | |
| prom_printf("PROM SYNC COMMAND...\n"); | |
| show_free_areas(); | |
| if(current->pid != 0) { | |
| local_irq_enable(); | |
| sys_sync(); | |
| local_irq_disable(); | |
| } | |
| prom_printf("Returning to prom\n"); | |
| __asm__ __volatile__("wr %0, 0x0, %%tbr\n\t" | |
| "nop\n\t" | |
| "nop\n\t" | |
| "nop\n\t" : : "r" (prom_tbr)); | |
| local_irq_restore(flags); | |
| return; | |
| } | |
| unsigned int boot_flags __initdata = 0; | |
| #define BOOTME_DEBUG 0x1 | |
| /* Exported for mm/init.c:paging_init. */ | |
| unsigned long cmdline_memory_size __initdata = 0; | |
| static void | |
| prom_console_write(struct console *con, const char *s, unsigned n) | |
| { | |
| prom_write(s, n); | |
| } | |
| static struct console prom_debug_console = { | |
| .name = "debug", | |
| .write = prom_console_write, | |
| .flags = CON_PRINTBUFFER, | |
| .index = -1, | |
| }; | |
| /* | |
| * Process kernel command line switches that are specific to the | |
| * SPARC or that require special low-level processing. | |
| */ | |
| static void __init process_switch(char c) | |
| { | |
| switch (c) { | |
| case 'd': | |
| boot_flags |= BOOTME_DEBUG; | |
| break; | |
| case 's': | |
| break; | |
| case 'h': | |
| prom_printf("boot_flags_init: Halt!\n"); | |
| prom_halt(); | |
| break; | |
| case 'p': | |
| /* Use PROM debug console. */ | |
| register_console(&prom_debug_console); | |
| break; | |
| default: | |
| printk("Unknown boot switch (-%c)\n", c); | |
| break; | |
| } | |
| } | |
| static void __init boot_flags_init(char *commands) | |
| { | |
| while (*commands) { | |
| /* Move to the start of the next "argument". */ | |
| while (*commands && *commands == ' ') | |
| commands++; | |
| /* Process any command switches, otherwise skip it. */ | |
| if (*commands == '\0') | |
| break; | |
| if (*commands == '-') { | |
| commands++; | |
| while (*commands && *commands != ' ') | |
| process_switch(*commands++); | |
| continue; | |
| } | |
| if (!strncmp(commands, "mem=", 4)) { | |
| /* | |
| * "mem=XXX[kKmM] overrides the PROM-reported | |
| * memory size. | |
| */ | |
| cmdline_memory_size = simple_strtoul(commands + 4, | |
| &commands, 0); | |
| if (*commands == 'K' || *commands == 'k') { | |
| cmdline_memory_size <<= 10; | |
| commands++; | |
| } else if (*commands=='M' || *commands=='m') { | |
| cmdline_memory_size <<= 20; | |
| commands++; | |
| } | |
| } | |
| while (*commands && *commands != ' ') | |
| commands++; | |
| } | |
| } | |
| /* This routine will in the future do all the nasty prom stuff | |
| * to probe for the mmu type and its parameters, etc. This will | |
| * also be where SMP things happen plus the Sparc specific memory | |
| * physical memory probe as on the alpha. | |
| */ | |
| extern int prom_probe_memory(void); | |
| extern void sun4c_probe_vac(void); | |
| extern char cputypval; | |
| extern unsigned long start, end; | |
| extern void panic_setup(char *, int *); | |
| extern unsigned short root_flags; | |
| extern unsigned short root_dev; | |
| extern unsigned short ram_flags; | |
| #define RAMDISK_IMAGE_START_MASK 0x07FF | |
| #define RAMDISK_PROMPT_FLAG 0x8000 | |
| #define RAMDISK_LOAD_FLAG 0x4000 | |
| extern int root_mountflags; | |
| char reboot_command[COMMAND_LINE_SIZE]; | |
| enum sparc_cpu sparc_cpu_model; | |
| struct tt_entry *sparc_ttable; | |
| struct pt_regs fake_swapper_regs; | |
| void __init setup_arch(char **cmdline_p) | |
| { | |
| int i; | |
| unsigned long highest_paddr; | |
| sparc_ttable = (struct tt_entry *) &start; | |
| /* Initialize PROM console and command line. */ | |
| *cmdline_p = prom_getbootargs(); | |
| strcpy(boot_command_line, *cmdline_p); | |
| /* Set sparc_cpu_model */ | |
| sparc_cpu_model = sun_unknown; | |
| if(!strcmp(&cputypval,"sun4 ")) { sparc_cpu_model=sun4; } | |
| if(!strcmp(&cputypval,"sun4c")) { sparc_cpu_model=sun4c; } | |
| if(!strcmp(&cputypval,"sun4m")) { sparc_cpu_model=sun4m; } | |
| if(!strcmp(&cputypval,"sun4s")) { sparc_cpu_model=sun4m; } /* CP-1200 with PROM 2.30 -E */ | |
| if(!strcmp(&cputypval,"sun4d")) { sparc_cpu_model=sun4d; } | |
| if(!strcmp(&cputypval,"sun4e")) { sparc_cpu_model=sun4e; } | |
| if(!strcmp(&cputypval,"sun4u")) { sparc_cpu_model=sun4u; } | |
| #ifdef CONFIG_SUN4 | |
| if (sparc_cpu_model != sun4) { | |
| prom_printf("This kernel is for Sun4 architecture only.\n"); | |
| prom_halt(); | |
| } | |
| #endif | |
| printk("ARCH: "); | |
| switch(sparc_cpu_model) { | |
| case sun4: | |
| printk("SUN4\n"); | |
| break; | |
| case sun4c: | |
| printk("SUN4C\n"); | |
| break; | |
| case sun4m: | |
| printk("SUN4M\n"); | |
| break; | |
| case sun4d: | |
| printk("SUN4D\n"); | |
| break; | |
| case sun4e: | |
| printk("SUN4E\n"); | |
| break; | |
| case sun4u: | |
| printk("SUN4U\n"); | |
| break; | |
| default: | |
| printk("UNKNOWN!\n"); | |
| break; | |
| }; | |
| #ifdef CONFIG_DUMMY_CONSOLE | |
| conswitchp = &dummy_con; | |
| #elif defined(CONFIG_PROM_CONSOLE) | |
| conswitchp = &prom_con; | |
| #endif | |
| boot_flags_init(*cmdline_p); | |
| idprom_init(); | |
| if (ARCH_SUN4C_SUN4) | |
| sun4c_probe_vac(); | |
| load_mmu(); | |
| (void) prom_probe_memory(); | |
| phys_base = 0xffffffffUL; | |
| highest_paddr = 0UL; | |
| for (i = 0; sp_banks[i].num_bytes != 0; i++) { | |
| unsigned long top; | |
| if (sp_banks[i].base_addr < phys_base) | |
| phys_base = sp_banks[i].base_addr; | |
| top = sp_banks[i].base_addr + | |
| sp_banks[i].num_bytes; | |
| if (highest_paddr < top) | |
| highest_paddr = top; | |
| } | |
| pfn_base = phys_base >> PAGE_SHIFT; | |
| if (!root_flags) | |
| root_mountflags &= ~MS_RDONLY; | |
| ROOT_DEV = old_decode_dev(root_dev); | |
| #ifdef CONFIG_BLK_DEV_RAM | |
| rd_image_start = ram_flags & RAMDISK_IMAGE_START_MASK; | |
| rd_prompt = ((ram_flags & RAMDISK_PROMPT_FLAG) != 0); | |
| rd_doload = ((ram_flags & RAMDISK_LOAD_FLAG) != 0); | |
| #endif | |
| prom_setsync(prom_sync_me); | |
| if((boot_flags&BOOTME_DEBUG) && (linux_dbvec!=0) && | |
| ((*(short *)linux_dbvec) != -1)) { | |
| printk("Booted under KADB. Syncing trap table.\n"); | |
| (*(linux_dbvec->teach_debugger))(); | |
| } | |
| init_mm.context = (unsigned long) NO_CONTEXT; | |
| init_task.thread.kregs = &fake_swapper_regs; | |
| paging_init(); | |
| smp_setup_cpu_possible_map(); | |
| } | |
| extern char *sparc_cpu_type; | |
| extern char *sparc_fpu_type; | |
| static int ncpus_probed; | |
| static int show_cpuinfo(struct seq_file *m, void *__unused) | |
| { | |
| seq_printf(m, | |
| "cpu\t\t: %s\n" | |
| "fpu\t\t: %s\n" | |
| "promlib\t\t: Version %d Revision %d\n" | |
| "prom\t\t: %d.%d\n" | |
| "type\t\t: %s\n" | |
| "ncpus probed\t: %d\n" | |
| "ncpus active\t: %d\n" | |
| #ifndef CONFIG_SMP | |
| "CPU0Bogo\t: %lu.%02lu\n" | |
| "CPU0ClkTck\t: %ld\n" | |
| #endif | |
| , | |
| sparc_cpu_type ? sparc_cpu_type : "undetermined", | |
| sparc_fpu_type ? sparc_fpu_type : "undetermined", | |
| romvec->pv_romvers, | |
| prom_rev, | |
| romvec->pv_printrev >> 16, | |
| romvec->pv_printrev & 0xffff, | |
| &cputypval, | |
| ncpus_probed, | |
| num_online_cpus() | |
| #ifndef CONFIG_SMP | |
| , cpu_data(0).udelay_val/(500000/HZ), | |
| (cpu_data(0).udelay_val/(5000/HZ)) % 100, | |
| cpu_data(0).clock_tick | |
| #endif | |
| ); | |
| #ifdef CONFIG_SMP | |
| smp_bogo(m); | |
| #endif | |
| mmu_info(m); | |
| #ifdef CONFIG_SMP | |
| smp_info(m); | |
| #endif | |
| return 0; | |
| } | |
| static void *c_start(struct seq_file *m, loff_t *pos) | |
| { | |
| /* The pointer we are returning is arbitrary, | |
| * it just has to be non-NULL and not IS_ERR | |
| * in the success case. | |
| */ | |
| return *pos == 0 ? &c_start : NULL; | |
| } | |
| static void *c_next(struct seq_file *m, void *v, loff_t *pos) | |
| { | |
| ++*pos; | |
| return c_start(m, pos); | |
| } | |
| static void c_stop(struct seq_file *m, void *v) | |
| { | |
| } | |
| struct seq_operations cpuinfo_op = { | |
| .start =c_start, | |
| .next = c_next, | |
| .stop = c_stop, | |
| .show = show_cpuinfo, | |
| }; | |
| extern int stop_a_enabled; | |
| void sun_do_break(void) | |
| { | |
| if (!stop_a_enabled) | |
| return; | |
| printk("\n"); | |
| flush_user_windows(); | |
| prom_cmdline(); | |
| } | |
| int stop_a_enabled = 1; | |
| static int __init topology_init(void) | |
| { | |
| int i, ncpus, err; | |
| /* Count the number of physically present processors in | |
| * the machine, even on uniprocessor, so that /proc/cpuinfo | |
| * output is consistent with 2.4.x | |
| */ | |
| ncpus = 0; | |
| while (!cpu_find_by_instance(ncpus, NULL, NULL)) | |
| ncpus++; | |
| ncpus_probed = ncpus; | |
| err = 0; | |
| for_each_online_cpu(i) { | |
| struct cpu *p = kzalloc(sizeof(*p), GFP_KERNEL); | |
| if (!p) | |
| err = -ENOMEM; | |
| else | |
| register_cpu(p, i); | |
| } | |
| return err; | |
| } | |
| subsys_initcall(topology_init); |