| /* |
| * Regulator driver for LP873X PMIC |
| * |
| * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any |
| * kind, whether expressed or implied; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License version 2 for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| |
| #include <linux/mfd/lp873x.h> |
| |
| #define LP873X_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \ |
| _delay, _lr, _cr) \ |
| [_id] = { \ |
| .desc = { \ |
| .name = _name, \ |
| .supply_name = _of "-in", \ |
| .id = _id, \ |
| .of_match = of_match_ptr(_of), \ |
| .regulators_node = of_match_ptr("regulators"),\ |
| .ops = &_ops, \ |
| .n_voltages = _n, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .vsel_reg = _vr, \ |
| .vsel_mask = _vm, \ |
| .enable_reg = _er, \ |
| .enable_mask = _em, \ |
| .ramp_delay = _delay, \ |
| .linear_ranges = _lr, \ |
| .n_linear_ranges = ARRAY_SIZE(_lr), \ |
| .curr_table = lp873x_buck_uA, \ |
| .n_current_limits = ARRAY_SIZE(lp873x_buck_uA), \ |
| .csel_reg = (_cr), \ |
| .csel_mask = LP873X_BUCK0_CTRL_2_BUCK0_ILIM,\ |
| }, \ |
| .ctrl2_reg = _cr, \ |
| } |
| |
| struct lp873x_regulator { |
| struct regulator_desc desc; |
| unsigned int ctrl2_reg; |
| }; |
| |
| static const struct lp873x_regulator regulators[]; |
| |
| static const struct regulator_linear_range buck0_buck1_ranges[] = { |
| REGULATOR_LINEAR_RANGE(0, 0x0, 0x13, 0), |
| REGULATOR_LINEAR_RANGE(700000, 0x14, 0x17, 10000), |
| REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000), |
| REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000), |
| }; |
| |
| static const struct regulator_linear_range ldo0_ldo1_ranges[] = { |
| REGULATOR_LINEAR_RANGE(800000, 0x0, 0x19, 100000), |
| }; |
| |
| static const unsigned int lp873x_buck_ramp_delay[] = { |
| 30000, 15000, 10000, 7500, 3800, 1900, 940, 470 |
| }; |
| |
| /* LP873X BUCK current limit */ |
| static const unsigned int lp873x_buck_uA[] = { |
| 1500000, 2000000, 2500000, 3000000, 3500000, 4000000, |
| }; |
| |
| static int lp873x_buck_set_ramp_delay(struct regulator_dev *rdev, |
| int ramp_delay) |
| { |
| int id = rdev_get_id(rdev); |
| struct lp873x *lp873 = rdev_get_drvdata(rdev); |
| unsigned int reg; |
| int ret; |
| |
| if (ramp_delay <= 470) |
| reg = 7; |
| else if (ramp_delay <= 940) |
| reg = 6; |
| else if (ramp_delay <= 1900) |
| reg = 5; |
| else if (ramp_delay <= 3800) |
| reg = 4; |
| else if (ramp_delay <= 7500) |
| reg = 3; |
| else if (ramp_delay <= 10000) |
| reg = 2; |
| else if (ramp_delay <= 15000) |
| reg = 1; |
| else |
| reg = 0; |
| |
| ret = regmap_update_bits(lp873->regmap, regulators[id].ctrl2_reg, |
| LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE, |
| reg << __ffs(LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE)); |
| if (ret) { |
| dev_err(lp873->dev, "SLEW RATE write failed: %d\n", ret); |
| return ret; |
| } |
| |
| rdev->constraints->ramp_delay = lp873x_buck_ramp_delay[reg]; |
| |
| return 0; |
| } |
| |
| /* Operations permitted on BUCK0, BUCK1 */ |
| static const struct regulator_ops lp873x_buck01_ops = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_linear_range, |
| .map_voltage = regulator_map_voltage_linear_range, |
| .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| .set_ramp_delay = lp873x_buck_set_ramp_delay, |
| .set_current_limit = regulator_set_current_limit_regmap, |
| .get_current_limit = regulator_get_current_limit_regmap, |
| }; |
| |
| /* Operations permitted on LDO0 and LDO1 */ |
| static const struct regulator_ops lp873x_ldo01_ops = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_linear_range, |
| .map_voltage = regulator_map_voltage_linear_range, |
| }; |
| |
| static const struct lp873x_regulator regulators[] = { |
| LP873X_REGULATOR("BUCK0", LP873X_BUCK_0, "buck0", lp873x_buck01_ops, |
| 256, LP873X_REG_BUCK0_VOUT, |
| LP873X_BUCK0_VOUT_BUCK0_VSET, LP873X_REG_BUCK0_CTRL_1, |
| LP873X_BUCK0_CTRL_1_BUCK0_EN, 10000, |
| buck0_buck1_ranges, LP873X_REG_BUCK0_CTRL_2), |
| LP873X_REGULATOR("BUCK1", LP873X_BUCK_1, "buck1", lp873x_buck01_ops, |
| 256, LP873X_REG_BUCK1_VOUT, |
| LP873X_BUCK1_VOUT_BUCK1_VSET, LP873X_REG_BUCK1_CTRL_1, |
| LP873X_BUCK1_CTRL_1_BUCK1_EN, 10000, |
| buck0_buck1_ranges, LP873X_REG_BUCK1_CTRL_2), |
| LP873X_REGULATOR("LDO0", LP873X_LDO_0, "ldo0", lp873x_ldo01_ops, 26, |
| LP873X_REG_LDO0_VOUT, LP873X_LDO0_VOUT_LDO0_VSET, |
| LP873X_REG_LDO0_CTRL, |
| LP873X_LDO0_CTRL_LDO0_EN, 0, ldo0_ldo1_ranges, 0xFF), |
| LP873X_REGULATOR("LDO1", LP873X_LDO_1, "ldo1", lp873x_ldo01_ops, 26, |
| LP873X_REG_LDO1_VOUT, LP873X_LDO1_VOUT_LDO1_VSET, |
| LP873X_REG_LDO1_CTRL, |
| LP873X_LDO1_CTRL_LDO1_EN, 0, ldo0_ldo1_ranges, 0xFF), |
| }; |
| |
| static int lp873x_regulator_probe(struct platform_device *pdev) |
| { |
| struct lp873x *lp873 = dev_get_drvdata(pdev->dev.parent); |
| struct regulator_config config = { }; |
| struct regulator_dev *rdev; |
| int i; |
| |
| platform_set_drvdata(pdev, lp873); |
| |
| config.dev = &pdev->dev; |
| config.dev->of_node = lp873->dev->of_node; |
| config.driver_data = lp873; |
| config.regmap = lp873->regmap; |
| |
| for (i = 0; i < ARRAY_SIZE(regulators); i++) { |
| rdev = devm_regulator_register(&pdev->dev, ®ulators[i].desc, |
| &config); |
| if (IS_ERR(rdev)) { |
| dev_err(lp873->dev, "failed to register %s regulator\n", |
| pdev->name); |
| return PTR_ERR(rdev); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static const struct platform_device_id lp873x_regulator_id_table[] = { |
| { "lp873x-regulator", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(platform, lp873x_regulator_id_table); |
| |
| static struct platform_driver lp873x_regulator_driver = { |
| .driver = { |
| .name = "lp873x-pmic", |
| }, |
| .probe = lp873x_regulator_probe, |
| .id_table = lp873x_regulator_id_table, |
| }; |
| module_platform_driver(lp873x_regulator_driver); |
| |
| MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>"); |
| MODULE_DESCRIPTION("LP873X voltage regulator driver"); |
| MODULE_ALIAS("platform:lp873x-pmic"); |
| MODULE_LICENSE("GPL v2"); |