| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Clock driver for the ARM Integrator/IM-PD1 board |
| * Copyright (C) 2012-2013 Linus Walleij |
| */ |
| #include <linux/clk-provider.h> |
| #include <linux/clkdev.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/platform_data/clk-integrator.h> |
| |
| #include "icst.h" |
| #include "clk-icst.h" |
| |
| #define IMPD1_OSC1 0x00 |
| #define IMPD1_OSC2 0x04 |
| #define IMPD1_LOCK 0x08 |
| |
| struct impd1_clk { |
| char *pclkname; |
| struct clk *pclk; |
| char *vco1name; |
| struct clk *vco1clk; |
| char *vco2name; |
| struct clk *vco2clk; |
| struct clk *mmciclk; |
| char *uartname; |
| struct clk *uartclk; |
| char *spiname; |
| struct clk *spiclk; |
| char *scname; |
| struct clk *scclk; |
| struct clk_lookup *clks[15]; |
| }; |
| |
| /* One entry for each connected IM-PD1 LM */ |
| static struct impd1_clk impd1_clks[4]; |
| |
| /* |
| * There are two VCO's on the IM-PD1 |
| */ |
| |
| static const struct icst_params impd1_vco1_params = { |
| .ref = 24000000, /* 24 MHz */ |
| .vco_max = ICST525_VCO_MAX_3V, |
| .vco_min = ICST525_VCO_MIN, |
| .vd_min = 12, |
| .vd_max = 519, |
| .rd_min = 3, |
| .rd_max = 120, |
| .s2div = icst525_s2div, |
| .idx2s = icst525_idx2s, |
| }; |
| |
| static const struct clk_icst_desc impd1_icst1_desc = { |
| .params = &impd1_vco1_params, |
| .vco_offset = IMPD1_OSC1, |
| .lock_offset = IMPD1_LOCK, |
| }; |
| |
| static const struct icst_params impd1_vco2_params = { |
| .ref = 24000000, /* 24 MHz */ |
| .vco_max = ICST525_VCO_MAX_3V, |
| .vco_min = ICST525_VCO_MIN, |
| .vd_min = 12, |
| .vd_max = 519, |
| .rd_min = 3, |
| .rd_max = 120, |
| .s2div = icst525_s2div, |
| .idx2s = icst525_idx2s, |
| }; |
| |
| static const struct clk_icst_desc impd1_icst2_desc = { |
| .params = &impd1_vco2_params, |
| .vco_offset = IMPD1_OSC2, |
| .lock_offset = IMPD1_LOCK, |
| }; |
| |
| /** |
| * integrator_impd1_clk_init() - set up the integrator clock tree |
| * @base: base address of the logic module (LM) |
| * @id: the ID of this LM |
| */ |
| void integrator_impd1_clk_init(void __iomem *base, unsigned int id) |
| { |
| struct impd1_clk *imc; |
| struct clk *clk; |
| struct clk *pclk; |
| int i; |
| |
| if (id > 3) { |
| pr_crit("no more than 4 LMs can be attached\n"); |
| return; |
| } |
| imc = &impd1_clks[id]; |
| |
| /* Register the fixed rate PCLK */ |
| imc->pclkname = kasprintf(GFP_KERNEL, "lm%x-pclk", id); |
| pclk = clk_register_fixed_rate(NULL, imc->pclkname, NULL, 0, 0); |
| imc->pclk = pclk; |
| |
| imc->vco1name = kasprintf(GFP_KERNEL, "lm%x-vco1", id); |
| clk = icst_clk_register(NULL, &impd1_icst1_desc, imc->vco1name, NULL, |
| base); |
| imc->vco1clk = clk; |
| imc->clks[0] = clkdev_alloc(pclk, "apb_pclk", "lm%x:01000", id); |
| imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:01000", id); |
| |
| /* VCO2 is also called "CLK2" */ |
| imc->vco2name = kasprintf(GFP_KERNEL, "lm%x-vco2", id); |
| clk = icst_clk_register(NULL, &impd1_icst2_desc, imc->vco2name, NULL, |
| base); |
| imc->vco2clk = clk; |
| |
| /* MMCI uses CLK2 right off */ |
| imc->clks[2] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00700", id); |
| imc->clks[3] = clkdev_alloc(clk, NULL, "lm%x:00700", id); |
| |
| /* UART reference clock divides CLK2 by a fixed factor 4 */ |
| imc->uartname = kasprintf(GFP_KERNEL, "lm%x-uartclk", id); |
| clk = clk_register_fixed_factor(NULL, imc->uartname, imc->vco2name, |
| CLK_IGNORE_UNUSED, 1, 4); |
| imc->uartclk = clk; |
| imc->clks[4] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00100", id); |
| imc->clks[5] = clkdev_alloc(clk, NULL, "lm%x:00100", id); |
| imc->clks[6] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00200", id); |
| imc->clks[7] = clkdev_alloc(clk, NULL, "lm%x:00200", id); |
| |
| /* SPI PL022 clock divides CLK2 by a fixed factor 64 */ |
| imc->spiname = kasprintf(GFP_KERNEL, "lm%x-spiclk", id); |
| clk = clk_register_fixed_factor(NULL, imc->spiname, imc->vco2name, |
| CLK_IGNORE_UNUSED, 1, 64); |
| imc->clks[8] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00300", id); |
| imc->clks[9] = clkdev_alloc(clk, NULL, "lm%x:00300", id); |
| |
| /* The GPIO blocks and AACI have only PCLK */ |
| imc->clks[10] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00400", id); |
| imc->clks[11] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00500", id); |
| imc->clks[12] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00800", id); |
| |
| /* Smart Card clock divides CLK2 by a fixed factor 4 */ |
| imc->scname = kasprintf(GFP_KERNEL, "lm%x-scclk", id); |
| clk = clk_register_fixed_factor(NULL, imc->scname, imc->vco2name, |
| CLK_IGNORE_UNUSED, 1, 4); |
| imc->scclk = clk; |
| imc->clks[13] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00600", id); |
| imc->clks[14] = clkdev_alloc(clk, NULL, "lm%x:00600", id); |
| |
| for (i = 0; i < ARRAY_SIZE(imc->clks); i++) |
| clkdev_add(imc->clks[i]); |
| } |
| EXPORT_SYMBOL_GPL(integrator_impd1_clk_init); |
| |
| void integrator_impd1_clk_exit(unsigned int id) |
| { |
| int i; |
| struct impd1_clk *imc; |
| |
| if (id > 3) |
| return; |
| imc = &impd1_clks[id]; |
| |
| for (i = 0; i < ARRAY_SIZE(imc->clks); i++) |
| clkdev_drop(imc->clks[i]); |
| clk_unregister(imc->spiclk); |
| clk_unregister(imc->uartclk); |
| clk_unregister(imc->vco2clk); |
| clk_unregister(imc->vco1clk); |
| clk_unregister(imc->pclk); |
| kfree(imc->scname); |
| kfree(imc->spiname); |
| kfree(imc->uartname); |
| kfree(imc->vco2name); |
| kfree(imc->vco1name); |
| kfree(imc->pclkname); |
| } |
| EXPORT_SYMBOL_GPL(integrator_impd1_clk_exit); |