| # | |
| # Input core configuration | |
| # | |
| menuconfig INPUT_KEYBOARD | |
| bool "Keyboards" if EMBEDDED || !X86 | |
| default y | |
| help | |
| Say Y here, and a list of supported keyboards will be displayed. | |
| This option doesn't affect the kernel. | |
| If unsure, say Y. | |
| if INPUT_KEYBOARD | |
| config KEYBOARD_AAED2000 | |
| tristate "AAED-2000 keyboard" | |
| depends on MACH_AAED2000 | |
| select INPUT_POLLDEV | |
| default y | |
| help | |
| Say Y here to enable the keyboard on the Agilent AAED-2000 | |
| development board. | |
| To compile this driver as a module, choose M here: the | |
| module will be called aaed2000_kbd. | |
| config KEYBOARD_ADP5588 | |
| tristate "ADP5588 I2C QWERTY Keypad and IO Expander" | |
| depends on I2C | |
| help | |
| Say Y here if you want to use a ADP5588 attached to your | |
| system I2C bus. | |
| To compile this driver as a module, choose M here: the | |
| module will be called adp5588-keys. | |
| config KEYBOARD_AMIGA | |
| tristate "Amiga keyboard" | |
| depends on AMIGA | |
| help | |
| Say Y here if you are running Linux on any AMIGA and have a keyboard | |
| attached. | |
| To compile this driver as a module, choose M here: the | |
| module will be called amikbd. | |
| config ATARI_KBD_CORE | |
| bool | |
| config KEYBOARD_ATARI | |
| tristate "Atari keyboard" | |
| depends on ATARI | |
| select ATARI_KBD_CORE | |
| help | |
| Say Y here if you are running Linux on any Atari and have a keyboard | |
| attached. | |
| To compile this driver as a module, choose M here: the | |
| module will be called atakbd. | |
| config KEYBOARD_ATKBD | |
| tristate "AT keyboard" if EMBEDDED || !X86 | |
| default y | |
| select SERIO | |
| select SERIO_LIBPS2 | |
| select SERIO_I8042 if X86 | |
| select SERIO_GSCPS2 if GSC | |
| help | |
| Say Y here if you want to use a standard AT or PS/2 keyboard. Usually | |
| you'll need this, unless you have a different type keyboard (USB, ADB | |
| or other). This also works for AT and PS/2 keyboards connected over a | |
| PS/2 to serial converter. | |
| If unsure, say Y. | |
| To compile this driver as a module, choose M here: the | |
| module will be called atkbd. | |
| config KEYBOARD_ATKBD_HP_KEYCODES | |
| bool "Use HP keyboard scancodes" | |
| depends on PARISC && KEYBOARD_ATKBD | |
| default y | |
| help | |
| Say Y here if you have a PA-RISC machine and want to use an AT or | |
| PS/2 keyboard, and your keyboard uses keycodes that are specific to | |
| PA-RISC keyboards. | |
| Say N if you use a standard keyboard. | |
| config KEYBOARD_ATKBD_RDI_KEYCODES | |
| bool "Use PrecisionBook keyboard scancodes" | |
| depends on KEYBOARD_ATKBD_HP_KEYCODES | |
| default n | |
| help | |
| If you have an RDI PrecisionBook, say Y here if you want to use its | |
| built-in keyboard (as opposed to an external keyboard). | |
| The PrecisionBook has five keys that conflict with those used by most | |
| AT and PS/2 keyboards. These are as follows: | |
| PrecisionBook Standard AT or PS/2 | |
| F1 F12 | |
| Left Ctrl Left Alt | |
| Caps Lock Left Ctrl | |
| Right Ctrl Caps Lock | |
| Left 102nd key (the key to the right of Left Shift) | |
| If you say N here, and use the PrecisionBook keyboard, then each key | |
| in the left-hand column will be interpreted as the corresponding key | |
| in the right-hand column. | |
| If you say Y here, and use an external keyboard, then each key in the | |
| right-hand column will be interpreted as the key shown in the | |
| left-hand column. | |
| config QT2160 | |
| tristate "Atmel AT42QT2160 Touch Sensor Chip" | |
| depends on I2C && EXPERIMENTAL | |
| help | |
| If you say yes here you get support for Atmel AT42QT2160 Touch | |
| Sensor chip as a keyboard input. | |
| This driver can also be built as a module. If so, the module | |
| will be called qt2160. | |
| config KEYBOARD_BFIN | |
| tristate "Blackfin BF54x keypad support" | |
| depends on (BF54x && !BF544) | |
| help | |
| Say Y here if you want to use the BF54x keypad. | |
| To compile this driver as a module, choose M here: the | |
| module will be called bf54x-keys. | |
| config KEYBOARD_CORGI | |
| tristate "Corgi keyboard" | |
| depends on PXA_SHARPSL | |
| default y | |
| help | |
| Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx | |
| series of PDAs. | |
| To compile this driver as a module, choose M here: the | |
| module will be called corgikbd. | |
| config KEYBOARD_LKKBD | |
| tristate "DECstation/VAXstation LK201/LK401 keyboard" | |
| select SERIO | |
| help | |
| Say Y here if you want to use a LK201 or LK401 style serial | |
| keyboard. This keyboard is also useable on PCs if you attach | |
| it with the inputattach program. The connector pinout is | |
| described within lkkbd.c. | |
| To compile this driver as a module, choose M here: the | |
| module will be called lkkbd. | |
| config KEYBOARD_EP93XX | |
| tristate "EP93xx Matrix Keypad support" | |
| depends on ARCH_EP93XX | |
| help | |
| Say Y here to enable the matrix keypad on the Cirrus EP93XX. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ep93xx_keypad. | |
| config KEYBOARD_GPIO | |
| tristate "GPIO Buttons" | |
| depends on GENERIC_GPIO | |
| help | |
| This driver implements support for buttons connected | |
| to GPIO pins of various CPUs (and some other chips). | |
| Say Y here if your device has buttons connected | |
| directly to such GPIO pins. Your board-specific | |
| setup logic must also provide a platform device, | |
| with configuration data saying which GPIOs are used. | |
| To compile this driver as a module, choose M here: the | |
| module will be called gpio_keys. | |
| config KEYBOARD_MATRIX | |
| tristate "GPIO driven matrix keypad support" | |
| depends on GENERIC_GPIO | |
| help | |
| Enable support for GPIO driven matrix keypad. | |
| To compile this driver as a module, choose M here: the | |
| module will be called matrix_keypad. | |
| config KEYBOARD_HIL_OLD | |
| tristate "HP HIL keyboard support (simple driver)" | |
| depends on GSC || HP300 | |
| default y | |
| help | |
| The "Human Interface Loop" is a older, 8-channel USB-like | |
| controller used in several Hewlett Packard models. This driver | |
| was adapted from the one written for m68k/hp300, and implements | |
| support for a keyboard attached to the HIL port, but not for | |
| any other types of HIL input devices like mice or tablets. | |
| However, it has been thoroughly tested and is stable. | |
| If you want full HIL support including support for multiple | |
| keyboards, mice, and tablets, you have to enable the | |
| "HP System Device Controller i8042 Support" in the input/serio | |
| submenu. | |
| config KEYBOARD_HIL | |
| tristate "HP HIL keyboard/pointer support" | |
| depends on GSC || HP300 | |
| default y | |
| select HP_SDC | |
| select HIL_MLC | |
| select SERIO | |
| help | |
| The "Human Interface Loop" is a older, 8-channel USB-like | |
| controller used in several Hewlett Packard models. | |
| This driver implements support for HIL-keyboards and pointing | |
| devices (mice, tablets, touchscreens) attached | |
| to your machine, so normally you should say Y here. | |
| config KEYBOARD_HP6XX | |
| tristate "HP Jornada 6xx keyboard" | |
| depends on SH_HP6XX | |
| select INPUT_POLLDEV | |
| help | |
| Say Y here if you have a HP Jornada 620/660/680/690 and want to | |
| support the built-in keyboard. | |
| To compile this driver as a module, choose M here: the | |
| module will be called jornada680_kbd. | |
| config KEYBOARD_HP7XX | |
| tristate "HP Jornada 7xx keyboard" | |
| depends on SA1100_JORNADA720_SSP && SA1100_SSP | |
| help | |
| Say Y here if you have a HP Jornada 710/720/728 and want to | |
| support the built-in keyboard. | |
| To compile this driver as a module, choose M here: the | |
| module will be called jornada720_kbd. | |
| config KEYBOARD_LM8323 | |
| tristate "LM8323 keypad chip" | |
| depends on I2C | |
| depends on LEDS_CLASS | |
| help | |
| If you say yes here you get support for the National Semiconductor | |
| LM8323 keypad controller. | |
| To compile this driver as a module, choose M here: the | |
| module will be called lm8323. | |
| config KEYBOARD_LOCOMO | |
| tristate "LoCoMo Keyboard Support" | |
| depends on SHARP_LOCOMO | |
| help | |
| Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA | |
| To compile this driver as a module, choose M here: the | |
| module will be called locomokbd. | |
| config KEYBOARD_MAPLE | |
| tristate "Maple bus keyboard" | |
| depends on SH_DREAMCAST && MAPLE | |
| help | |
| Say Y here if you have a Dreamcast console running Linux and have | |
| a keyboard attached to its Maple bus. | |
| To compile this driver as a module, choose M here: the | |
| module will be called maple_keyb. | |
| config KEYBOARD_MAX7359 | |
| tristate "Maxim MAX7359 Key Switch Controller" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Maxim MAX7359 Key | |
| Switch Controller chip. This providers microprocessors with | |
| management of up to 64 key switches | |
| To compile this driver as a module, choose M here: the | |
| module will be called max7359_keypad. | |
| config KEYBOARD_NEWTON | |
| tristate "Newton keyboard" | |
| select SERIO | |
| help | |
| Say Y here if you have a Newton keyboard on a serial port. | |
| To compile this driver as a module, choose M here: the | |
| module will be called newtonkbd. | |
| config KEYBOARD_OPENCORES | |
| tristate "OpenCores Keyboard Controller" | |
| help | |
| Say Y here if you want to use the OpenCores Keyboard Controller | |
| http://www.opencores.org/project,keyboardcontroller | |
| To compile this driver as a module, choose M here; the | |
| module will be called opencores-kbd. | |
| config KEYBOARD_PXA27x | |
| tristate "PXA27x/PXA3xx keypad support" | |
| depends on PXA27x || PXA3xx | |
| help | |
| Enable support for PXA27x/PXA3xx keypad controller. | |
| To compile this driver as a module, choose M here: the | |
| module will be called pxa27x_keypad. | |
| config KEYBOARD_PXA930_ROTARY | |
| tristate "PXA930/PXA935 Enhanced Rotary Controller Support" | |
| depends on CPU_PXA930 || CPU_PXA935 | |
| help | |
| Enable support for PXA930/PXA935 Enhanced Rotary Controller. | |
| To compile this driver as a module, choose M here: the | |
| module will be called pxa930_rotary. | |
| config KEYBOARD_SPITZ | |
| tristate "Spitz keyboard" | |
| depends on PXA_SHARPSL | |
| default y | |
| help | |
| Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, | |
| SL-C3000 and Sl-C3100 series of PDAs. | |
| To compile this driver as a module, choose M here: the | |
| module will be called spitzkbd. | |
| config KEYBOARD_STOWAWAY | |
| tristate "Stowaway keyboard" | |
| select SERIO | |
| help | |
| Say Y here if you have a Stowaway keyboard on a serial port. | |
| Stowaway compatible keyboards like Dicota Input-PDA keyboard | |
| are also supported by this driver. | |
| To compile this driver as a module, choose M here: the | |
| module will be called stowaway. | |
| config KEYBOARD_SUNKBD | |
| tristate "Sun Type 4 and Type 5 keyboard" | |
| select SERIO | |
| help | |
| Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, | |
| connected either to the Sun keyboard connector or to an serial | |
| (RS-232) port via a simple adapter. | |
| To compile this driver as a module, choose M here: the | |
| module will be called sunkbd. | |
| config KEYBOARD_SH_KEYSC | |
| tristate "SuperH KEYSC keypad support" | |
| depends on SUPERH | |
| help | |
| Say Y here if you want to use a keypad attached to the KEYSC block | |
| on SuperH processors such as sh7722 and sh7343. | |
| To compile this driver as a module, choose M here: the | |
| module will be called sh_keysc. | |
| config KEYBOARD_DAVINCI | |
| tristate "TI DaVinci Key Scan" | |
| depends on ARCH_DAVINCI_DM365 | |
| help | |
| Say Y to enable keypad module support for the TI DaVinci | |
| platforms (DM365). | |
| To compile this driver as a module, choose M here: the | |
| module will be called davinci_keyscan. | |
| config KEYBOARD_OMAP | |
| tristate "TI OMAP keypad support" | |
| depends on (ARCH_OMAP1 || ARCH_OMAP2) | |
| help | |
| Say Y here if you want to use the OMAP keypad. | |
| To compile this driver as a module, choose M here: the | |
| module will be called omap-keypad. | |
| config KEYBOARD_TWL4030 | |
| tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" | |
| depends on TWL4030_CORE | |
| help | |
| Say Y here if your board use the keypad controller on | |
| TWL4030 family chips. It's safe to say enable this | |
| even on boards that don't use the keypad controller. | |
| To compile this driver as a module, choose M here: the | |
| module will be called twl4030_keypad. | |
| config KEYBOARD_TOSA | |
| tristate "Tosa keyboard" | |
| depends on MACH_TOSA | |
| default y | |
| help | |
| Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) | |
| To compile this driver as a module, choose M here: the | |
| module will be called tosakbd. | |
| config KEYBOARD_TOSA_USE_EXT_KEYCODES | |
| bool "Tosa keyboard: use extended keycodes" | |
| depends on KEYBOARD_TOSA | |
| help | |
| Say Y here to enable the tosa keyboard driver to generate extended | |
| (>= 127) keycodes. Be aware, that they can't be correctly interpreted | |
| by either console keyboard driver or by Kdrive keybd driver. | |
| Say Y only if you know, what you are doing! | |
| config KEYBOARD_XTKBD | |
| tristate "XT keyboard" | |
| select SERIO | |
| help | |
| Say Y here if you want to use the old IBM PC/XT keyboard (or | |
| compatible) on your system. This is only possible with a | |
| parallel port keyboard adapter, you cannot connect it to the | |
| keyboard port on a PC that runs Linux. | |
| To compile this driver as a module, choose M here: the | |
| module will be called xtkbd. | |
| config KEYBOARD_W90P910 | |
| tristate "W90P910 Matrix Keypad support" | |
| depends on ARCH_W90X900 | |
| help | |
| Say Y here to enable the matrix keypad on evaluation board | |
| based on W90P910. | |
| To compile this driver as a module, choose M here: the | |
| module will be called w90p910_keypad. | |
| endif |