| /* | |
| * Memory controller driver for ARM PrimeCell PL172 | |
| * PrimeCell MultiPort Memory Controller (PL172) | |
| * | |
| * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> | |
| * | |
| * Based on: | |
| * TI AEMIF driver, Copyright (C) 2010 - 2013 Texas Instruments Inc. | |
| * | |
| * This file is licensed under the terms of the GNU General Public | |
| * License version 2. This program is licensed "as is" without any | |
| * warranty of any kind, whether express or implied. | |
| */ | |
| #include <linux/amba/bus.h> | |
| #include <linux/clk.h> | |
| #include <linux/device.h> | |
| #include <linux/err.h> | |
| #include <linux/init.h> | |
| #include <linux/io.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/time.h> | |
| #define MPMC_STATIC_CFG(n) (0x200 + 0x20 * n) | |
| #define MPMC_STATIC_CFG_MW_8BIT 0x0 | |
| #define MPMC_STATIC_CFG_MW_16BIT 0x1 | |
| #define MPMC_STATIC_CFG_MW_32BIT 0x2 | |
| #define MPMC_STATIC_CFG_PM BIT(3) | |
| #define MPMC_STATIC_CFG_PC BIT(6) | |
| #define MPMC_STATIC_CFG_PB BIT(7) | |
| #define MPMC_STATIC_CFG_EW BIT(8) | |
| #define MPMC_STATIC_CFG_B BIT(19) | |
| #define MPMC_STATIC_CFG_P BIT(20) | |
| #define MPMC_STATIC_WAIT_WEN(n) (0x204 + 0x20 * n) | |
| #define MPMC_STATIC_WAIT_WEN_MAX 0x0f | |
| #define MPMC_STATIC_WAIT_OEN(n) (0x208 + 0x20 * n) | |
| #define MPMC_STATIC_WAIT_OEN_MAX 0x0f | |
| #define MPMC_STATIC_WAIT_RD(n) (0x20c + 0x20 * n) | |
| #define MPMC_STATIC_WAIT_RD_MAX 0x1f | |
| #define MPMC_STATIC_WAIT_PAGE(n) (0x210 + 0x20 * n) | |
| #define MPMC_STATIC_WAIT_PAGE_MAX 0x1f | |
| #define MPMC_STATIC_WAIT_WR(n) (0x214 + 0x20 * n) | |
| #define MPMC_STATIC_WAIT_WR_MAX 0x1f | |
| #define MPMC_STATIC_WAIT_TURN(n) (0x218 + 0x20 * n) | |
| #define MPMC_STATIC_WAIT_TURN_MAX 0x0f | |
| /* Maximum number of static chip selects */ | |
| #define PL172_MAX_CS 4 | |
| struct pl172_data { | |
| void __iomem *base; | |
| unsigned long rate; | |
| struct clk *clk; | |
| }; | |
| static int pl172_timing_prop(struct amba_device *adev, | |
| const struct device_node *np, const char *name, | |
| u32 reg_offset, u32 max, int start) | |
| { | |
| struct pl172_data *pl172 = amba_get_drvdata(adev); | |
| int cycles; | |
| u32 val; | |
| if (!of_property_read_u32(np, name, &val)) { | |
| cycles = DIV_ROUND_UP(val * pl172->rate, NSEC_PER_MSEC) - start; | |
| if (cycles < 0) { | |
| cycles = 0; | |
| } else if (cycles > max) { | |
| dev_err(&adev->dev, "%s timing too tight\n", name); | |
| return -EINVAL; | |
| } | |
| writel(cycles, pl172->base + reg_offset); | |
| } | |
| dev_dbg(&adev->dev, "%s: %u cycle(s)\n", name, start + | |
| readl(pl172->base + reg_offset)); | |
| return 0; | |
| } | |
| static int pl172_setup_static(struct amba_device *adev, | |
| struct device_node *np, u32 cs) | |
| { | |
| struct pl172_data *pl172 = amba_get_drvdata(adev); | |
| u32 cfg; | |
| int ret; | |
| /* MPMC static memory configuration */ | |
| if (!of_property_read_u32(np, "mpmc,memory-width", &cfg)) { | |
| if (cfg == 8) { | |
| cfg = MPMC_STATIC_CFG_MW_8BIT; | |
| } else if (cfg == 16) { | |
| cfg = MPMC_STATIC_CFG_MW_16BIT; | |
| } else if (cfg == 32) { | |
| cfg = MPMC_STATIC_CFG_MW_32BIT; | |
| } else { | |
| dev_err(&adev->dev, "invalid memory width cs%u\n", cs); | |
| return -EINVAL; | |
| } | |
| } else { | |
| dev_err(&adev->dev, "memory-width property required\n"); | |
| return -EINVAL; | |
| } | |
| if (of_property_read_bool(np, "mpmc,async-page-mode")) | |
| cfg |= MPMC_STATIC_CFG_PM; | |
| if (of_property_read_bool(np, "mpmc,cs-active-high")) | |
| cfg |= MPMC_STATIC_CFG_PC; | |
| if (of_property_read_bool(np, "mpmc,byte-lane-low")) | |
| cfg |= MPMC_STATIC_CFG_PB; | |
| if (of_property_read_bool(np, "mpmc,extended-wait")) | |
| cfg |= MPMC_STATIC_CFG_EW; | |
| if (amba_part(adev) == 0x172 && | |
| of_property_read_bool(np, "mpmc,buffer-enable")) | |
| cfg |= MPMC_STATIC_CFG_B; | |
| if (of_property_read_bool(np, "mpmc,write-protect")) | |
| cfg |= MPMC_STATIC_CFG_P; | |
| writel(cfg, pl172->base + MPMC_STATIC_CFG(cs)); | |
| dev_dbg(&adev->dev, "mpmc static config cs%u: 0x%08x\n", cs, cfg); | |
| /* MPMC static memory timing */ | |
| ret = pl172_timing_prop(adev, np, "mpmc,write-enable-delay", | |
| MPMC_STATIC_WAIT_WEN(cs), | |
| MPMC_STATIC_WAIT_WEN_MAX, 1); | |
| if (ret) | |
| goto fail; | |
| ret = pl172_timing_prop(adev, np, "mpmc,output-enable-delay", | |
| MPMC_STATIC_WAIT_OEN(cs), | |
| MPMC_STATIC_WAIT_OEN_MAX, 0); | |
| if (ret) | |
| goto fail; | |
| ret = pl172_timing_prop(adev, np, "mpmc,read-access-delay", | |
| MPMC_STATIC_WAIT_RD(cs), | |
| MPMC_STATIC_WAIT_RD_MAX, 1); | |
| if (ret) | |
| goto fail; | |
| ret = pl172_timing_prop(adev, np, "mpmc,page-mode-read-delay", | |
| MPMC_STATIC_WAIT_PAGE(cs), | |
| MPMC_STATIC_WAIT_PAGE_MAX, 1); | |
| if (ret) | |
| goto fail; | |
| ret = pl172_timing_prop(adev, np, "mpmc,write-access-delay", | |
| MPMC_STATIC_WAIT_WR(cs), | |
| MPMC_STATIC_WAIT_WR_MAX, 2); | |
| if (ret) | |
| goto fail; | |
| ret = pl172_timing_prop(adev, np, "mpmc,turn-round-delay", | |
| MPMC_STATIC_WAIT_TURN(cs), | |
| MPMC_STATIC_WAIT_TURN_MAX, 1); | |
| if (ret) | |
| goto fail; | |
| return 0; | |
| fail: | |
| dev_err(&adev->dev, "failed to configure cs%u\n", cs); | |
| return ret; | |
| } | |
| static int pl172_parse_cs_config(struct amba_device *adev, | |
| struct device_node *np) | |
| { | |
| u32 cs; | |
| if (!of_property_read_u32(np, "mpmc,cs", &cs)) { | |
| if (cs >= PL172_MAX_CS) { | |
| dev_err(&adev->dev, "cs%u invalid\n", cs); | |
| return -EINVAL; | |
| } | |
| return pl172_setup_static(adev, np, cs); | |
| } | |
| dev_err(&adev->dev, "cs property required\n"); | |
| return -EINVAL; | |
| } | |
| static const char * const pl172_revisions[] = {"r1", "r2", "r2p3", "r2p4"}; | |
| static const char * const pl175_revisions[] = {"r1"}; | |
| static const char * const pl176_revisions[] = {"r0"}; | |
| static int pl172_probe(struct amba_device *adev, const struct amba_id *id) | |
| { | |
| struct device_node *child_np, *np = adev->dev.of_node; | |
| struct device *dev = &adev->dev; | |
| static const char *rev = "?"; | |
| struct pl172_data *pl172; | |
| int ret; | |
| if (amba_part(adev) == 0x172) { | |
| if (amba_rev(adev) < ARRAY_SIZE(pl172_revisions)) | |
| rev = pl172_revisions[amba_rev(adev)]; | |
| } else if (amba_part(adev) == 0x175) { | |
| if (amba_rev(adev) < ARRAY_SIZE(pl175_revisions)) | |
| rev = pl175_revisions[amba_rev(adev)]; | |
| } else if (amba_part(adev) == 0x176) { | |
| if (amba_rev(adev) < ARRAY_SIZE(pl176_revisions)) | |
| rev = pl176_revisions[amba_rev(adev)]; | |
| } | |
| dev_info(dev, "ARM PL%x revision %s\n", amba_part(adev), rev); | |
| pl172 = devm_kzalloc(dev, sizeof(*pl172), GFP_KERNEL); | |
| if (!pl172) | |
| return -ENOMEM; | |
| pl172->clk = devm_clk_get(dev, "mpmcclk"); | |
| if (IS_ERR(pl172->clk)) { | |
| dev_err(dev, "no mpmcclk provided clock\n"); | |
| return PTR_ERR(pl172->clk); | |
| } | |
| ret = clk_prepare_enable(pl172->clk); | |
| if (ret) { | |
| dev_err(dev, "unable to mpmcclk enable clock\n"); | |
| return ret; | |
| } | |
| pl172->rate = clk_get_rate(pl172->clk) / MSEC_PER_SEC; | |
| if (!pl172->rate) { | |
| dev_err(dev, "unable to get mpmcclk clock rate\n"); | |
| ret = -EINVAL; | |
| goto err_clk_enable; | |
| } | |
| ret = amba_request_regions(adev, NULL); | |
| if (ret) { | |
| dev_err(dev, "unable to request AMBA regions\n"); | |
| goto err_clk_enable; | |
| } | |
| pl172->base = devm_ioremap(dev, adev->res.start, | |
| resource_size(&adev->res)); | |
| if (!pl172->base) { | |
| dev_err(dev, "ioremap failed\n"); | |
| ret = -ENOMEM; | |
| goto err_no_ioremap; | |
| } | |
| amba_set_drvdata(adev, pl172); | |
| /* | |
| * Loop through each child node, which represent a chip select, and | |
| * configure parameters and timing. If successful; populate devices | |
| * under that node. | |
| */ | |
| for_each_available_child_of_node(np, child_np) { | |
| ret = pl172_parse_cs_config(adev, child_np); | |
| if (ret) | |
| continue; | |
| of_platform_populate(child_np, NULL, NULL, dev); | |
| } | |
| return 0; | |
| err_no_ioremap: | |
| amba_release_regions(adev); | |
| err_clk_enable: | |
| clk_disable_unprepare(pl172->clk); | |
| return ret; | |
| } | |
| static int pl172_remove(struct amba_device *adev) | |
| { | |
| struct pl172_data *pl172 = amba_get_drvdata(adev); | |
| clk_disable_unprepare(pl172->clk); | |
| amba_release_regions(adev); | |
| return 0; | |
| } | |
| static const struct amba_id pl172_ids[] = { | |
| /* PrimeCell MPMC PL172, EMC found on NXP LPC18xx and LPC43xx */ | |
| { | |
| .id = 0x07041172, | |
| .mask = 0x3f0fffff, | |
| }, | |
| /* PrimeCell MPMC PL175, EMC found on NXP LPC32xx */ | |
| { | |
| .id = 0x07041175, | |
| .mask = 0x3f0fffff, | |
| }, | |
| /* PrimeCell MPMC PL176 */ | |
| { | |
| .id = 0x89041176, | |
| .mask = 0xff0fffff, | |
| }, | |
| { 0, 0 }, | |
| }; | |
| MODULE_DEVICE_TABLE(amba, pl172_ids); | |
| static struct amba_driver pl172_driver = { | |
| .drv = { | |
| .name = "memory-pl172", | |
| }, | |
| .probe = pl172_probe, | |
| .remove = pl172_remove, | |
| .id_table = pl172_ids, | |
| }; | |
| module_amba_driver(pl172_driver); | |
| MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>"); | |
| MODULE_DESCRIPTION("PL172 Memory Controller Driver"); | |
| MODULE_LICENSE("GPL v2"); |