| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * cec - HDMI Consumer Electronics Control support header |
| * |
| * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved. |
| */ |
| |
| #ifndef _MEDIA_CEC_H |
| #define _MEDIA_CEC_H |
| |
| #include <linux/poll.h> |
| #include <linux/fs.h> |
| #include <linux/debugfs.h> |
| #include <linux/device.h> |
| #include <linux/cdev.h> |
| #include <linux/kthread.h> |
| #include <linux/timer.h> |
| #include <linux/cec-funcs.h> |
| #include <media/rc-core.h> |
| |
| /* CEC_ADAP_G_CONNECTOR_INFO is available */ |
| #define CEC_CAP_CONNECTOR_INFO (1 << 8) |
| |
| #define CEC_CAP_DEFAULTS (CEC_CAP_LOG_ADDRS | CEC_CAP_TRANSMIT | \ |
| CEC_CAP_PASSTHROUGH | CEC_CAP_RC) |
| |
| /** |
| * struct cec_devnode - cec device node |
| * @dev: cec device |
| * @cdev: cec character device |
| * @minor: device node minor number |
| * @registered: the device was correctly registered |
| * @unregistered: the device was unregistered |
| * @fhs_lock: lock to control access to the filehandle list |
| * @fhs: the list of open filehandles (cec_fh) |
| * |
| * This structure represents a cec-related device node. |
| * |
| * The @parent is a physical device. It must be set by core or device drivers |
| * before registering the node. |
| */ |
| struct cec_devnode { |
| /* sysfs */ |
| struct device dev; |
| struct cdev cdev; |
| |
| /* device info */ |
| int minor; |
| bool registered; |
| bool unregistered; |
| struct list_head fhs; |
| struct mutex lock; |
| }; |
| |
| struct cec_adapter; |
| struct cec_data; |
| struct cec_pin; |
| struct cec_notifier; |
| |
| struct cec_data { |
| struct list_head list; |
| struct list_head xfer_list; |
| struct cec_adapter *adap; |
| struct cec_msg msg; |
| struct cec_fh *fh; |
| struct delayed_work work; |
| struct completion c; |
| u8 attempts; |
| bool blocking; |
| bool completed; |
| }; |
| |
| struct cec_msg_entry { |
| struct list_head list; |
| struct cec_msg msg; |
| }; |
| |
| struct cec_event_entry { |
| struct list_head list; |
| struct cec_event ev; |
| }; |
| |
| #define CEC_NUM_CORE_EVENTS 2 |
| #define CEC_NUM_EVENTS CEC_EVENT_PIN_5V_HIGH |
| |
| struct cec_fh { |
| struct list_head list; |
| struct list_head xfer_list; |
| struct cec_adapter *adap; |
| u8 mode_initiator; |
| u8 mode_follower; |
| |
| /* Events */ |
| wait_queue_head_t wait; |
| struct mutex lock; |
| struct list_head events[CEC_NUM_EVENTS]; /* queued events */ |
| u16 queued_events[CEC_NUM_EVENTS]; |
| unsigned int total_queued_events; |
| struct cec_event_entry core_events[CEC_NUM_CORE_EVENTS]; |
| struct list_head msgs; /* queued messages */ |
| unsigned int queued_msgs; |
| }; |
| |
| #define CEC_SIGNAL_FREE_TIME_RETRY 3 |
| #define CEC_SIGNAL_FREE_TIME_NEW_INITIATOR 5 |
| #define CEC_SIGNAL_FREE_TIME_NEXT_XFER 7 |
| |
| /* The nominal data bit period is 2.4 ms */ |
| #define CEC_FREE_TIME_TO_USEC(ft) ((ft) * 2400) |
| |
| struct cec_adap_ops { |
| /* Low-level callbacks */ |
| int (*adap_enable)(struct cec_adapter *adap, bool enable); |
| int (*adap_monitor_all_enable)(struct cec_adapter *adap, bool enable); |
| int (*adap_monitor_pin_enable)(struct cec_adapter *adap, bool enable); |
| int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr); |
| int (*adap_transmit)(struct cec_adapter *adap, u8 attempts, |
| u32 signal_free_time, struct cec_msg *msg); |
| void (*adap_status)(struct cec_adapter *adap, struct seq_file *file); |
| void (*adap_free)(struct cec_adapter *adap); |
| |
| /* Error injection callbacks */ |
| int (*error_inj_show)(struct cec_adapter *adap, struct seq_file *sf); |
| bool (*error_inj_parse_line)(struct cec_adapter *adap, char *line); |
| |
| /* High-level CEC message callback */ |
| int (*received)(struct cec_adapter *adap, struct cec_msg *msg); |
| }; |
| |
| /* |
| * The minimum message length you can receive (excepting poll messages) is 2. |
| * With a transfer rate of at most 36 bytes per second this makes 18 messages |
| * per second worst case. |
| * |
| * We queue at most 3 seconds worth of received messages. The CEC specification |
| * requires that messages are replied to within a second, so 3 seconds should |
| * give more than enough margin. Since most messages are actually more than 2 |
| * bytes, this is in practice a lot more than 3 seconds. |
| */ |
| #define CEC_MAX_MSG_RX_QUEUE_SZ (18 * 3) |
| |
| /* |
| * The transmit queue is limited to 1 second worth of messages (worst case). |
| * Messages can be transmitted by userspace and kernel space. But for both it |
| * makes no sense to have a lot of messages queued up. One second seems |
| * reasonable. |
| */ |
| #define CEC_MAX_MSG_TX_QUEUE_SZ (18 * 1) |
| |
| /** |
| * struct cec_drm_connector_info - tells which drm connector is |
| * associated with the CEC adapter. |
| * @card_no: drm card number |
| * @connector_id: drm connector ID |
| */ |
| struct cec_drm_connector_info { |
| __u32 card_no; |
| __u32 connector_id; |
| }; |
| |
| #define CEC_CONNECTOR_TYPE_NO_CONNECTOR 0 |
| #define CEC_CONNECTOR_TYPE_DRM 1 |
| |
| /** |
| * struct cec_connector_info - tells if and which connector is |
| * associated with the CEC adapter. |
| * @type: connector type (if any) |
| * @drm: drm connector info |
| */ |
| struct cec_connector_info { |
| __u32 type; |
| union { |
| struct cec_drm_connector_info drm; |
| __u32 raw[16]; |
| }; |
| }; |
| |
| struct cec_adapter { |
| struct module *owner; |
| char name[32]; |
| struct cec_devnode devnode; |
| struct mutex lock; |
| struct rc_dev *rc; |
| |
| struct list_head transmit_queue; |
| unsigned int transmit_queue_sz; |
| struct list_head wait_queue; |
| struct cec_data *transmitting; |
| bool transmit_in_progress; |
| |
| struct task_struct *kthread_config; |
| struct completion config_completion; |
| |
| struct task_struct *kthread; |
| wait_queue_head_t kthread_waitq; |
| wait_queue_head_t waitq; |
| |
| const struct cec_adap_ops *ops; |
| void *priv; |
| u32 capabilities; |
| u8 available_log_addrs; |
| |
| u16 phys_addr; |
| bool needs_hpd; |
| bool is_configuring; |
| bool is_configured; |
| bool cec_pin_is_high; |
| u8 last_initiator; |
| u32 monitor_all_cnt; |
| u32 monitor_pin_cnt; |
| u32 follower_cnt; |
| struct cec_fh *cec_follower; |
| struct cec_fh *cec_initiator; |
| bool passthrough; |
| struct cec_log_addrs log_addrs; |
| struct cec_connector_info conn_info; |
| |
| u32 tx_timeouts; |
| |
| #ifdef CONFIG_CEC_NOTIFIER |
| struct cec_notifier *notifier; |
| #endif |
| #ifdef CONFIG_CEC_PIN |
| struct cec_pin *pin; |
| #endif |
| |
| struct dentry *cec_dir; |
| struct dentry *status_file; |
| struct dentry *error_inj_file; |
| |
| u16 phys_addrs[15]; |
| u32 sequence; |
| |
| char input_phys[32]; |
| }; |
| |
| static inline void *cec_get_drvdata(const struct cec_adapter *adap) |
| { |
| return adap->priv; |
| } |
| |
| static inline bool cec_has_log_addr(const struct cec_adapter *adap, u8 log_addr) |
| { |
| return adap->log_addrs.log_addr_mask & (1 << log_addr); |
| } |
| |
| static inline bool cec_is_sink(const struct cec_adapter *adap) |
| { |
| return adap->phys_addr == 0; |
| } |
| |
| /** |
| * cec_is_registered() - is the CEC adapter registered? |
| * |
| * @adap: the CEC adapter, may be NULL. |
| * |
| * Return: true if the adapter is registered, false otherwise. |
| */ |
| static inline bool cec_is_registered(const struct cec_adapter *adap) |
| { |
| return adap && adap->devnode.registered; |
| } |
| |
| #define cec_phys_addr_exp(pa) \ |
| ((pa) >> 12), ((pa) >> 8) & 0xf, ((pa) >> 4) & 0xf, (pa) & 0xf |
| |
| struct edid; |
| struct drm_connector; |
| |
| #if IS_REACHABLE(CONFIG_CEC_CORE) |
| struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, |
| void *priv, const char *name, u32 caps, u8 available_las); |
| int cec_register_adapter(struct cec_adapter *adap, struct device *parent); |
| void cec_unregister_adapter(struct cec_adapter *adap); |
| void cec_delete_adapter(struct cec_adapter *adap); |
| |
| int cec_s_log_addrs(struct cec_adapter *adap, struct cec_log_addrs *log_addrs, |
| bool block); |
| void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, |
| bool block); |
| void cec_s_phys_addr_from_edid(struct cec_adapter *adap, |
| const struct edid *edid); |
| void cec_s_conn_info(struct cec_adapter *adap, |
| const struct cec_connector_info *conn_info); |
| int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg, |
| bool block); |
| |
| /* Called by the adapter */ |
| void cec_transmit_done_ts(struct cec_adapter *adap, u8 status, |
| u8 arb_lost_cnt, u8 nack_cnt, u8 low_drive_cnt, |
| u8 error_cnt, ktime_t ts); |
| |
| static inline void cec_transmit_done(struct cec_adapter *adap, u8 status, |
| u8 arb_lost_cnt, u8 nack_cnt, |
| u8 low_drive_cnt, u8 error_cnt) |
| { |
| cec_transmit_done_ts(adap, status, arb_lost_cnt, nack_cnt, |
| low_drive_cnt, error_cnt, ktime_get()); |
| } |
| /* |
| * Simplified version of cec_transmit_done for hardware that doesn't retry |
| * failed transmits. So this is always just one attempt in which case |
| * the status is sufficient. |
| */ |
| void cec_transmit_attempt_done_ts(struct cec_adapter *adap, |
| u8 status, ktime_t ts); |
| |
| static inline void cec_transmit_attempt_done(struct cec_adapter *adap, |
| u8 status) |
| { |
| cec_transmit_attempt_done_ts(adap, status, ktime_get()); |
| } |
| |
| void cec_received_msg_ts(struct cec_adapter *adap, |
| struct cec_msg *msg, ktime_t ts); |
| |
| static inline void cec_received_msg(struct cec_adapter *adap, |
| struct cec_msg *msg) |
| { |
| cec_received_msg_ts(adap, msg, ktime_get()); |
| } |
| |
| /** |
| * cec_queue_pin_cec_event() - queue a CEC pin event with a given timestamp. |
| * |
| * @adap: pointer to the cec adapter |
| * @is_high: when true the CEC pin is high, otherwise it is low |
| * @dropped_events: when true some events were dropped |
| * @ts: the timestamp for this event |
| * |
| */ |
| void cec_queue_pin_cec_event(struct cec_adapter *adap, bool is_high, |
| bool dropped_events, ktime_t ts); |
| |
| /** |
| * cec_queue_pin_hpd_event() - queue a pin event with a given timestamp. |
| * |
| * @adap: pointer to the cec adapter |
| * @is_high: when true the HPD pin is high, otherwise it is low |
| * @ts: the timestamp for this event |
| * |
| */ |
| void cec_queue_pin_hpd_event(struct cec_adapter *adap, bool is_high, ktime_t ts); |
| |
| /** |
| * cec_queue_pin_5v_event() - queue a pin event with a given timestamp. |
| * |
| * @adap: pointer to the cec adapter |
| * @is_high: when true the 5V pin is high, otherwise it is low |
| * @ts: the timestamp for this event |
| * |
| */ |
| void cec_queue_pin_5v_event(struct cec_adapter *adap, bool is_high, ktime_t ts); |
| |
| /** |
| * cec_get_edid_phys_addr() - find and return the physical address |
| * |
| * @edid: pointer to the EDID data |
| * @size: size in bytes of the EDID data |
| * @offset: If not %NULL then the location of the physical address |
| * bytes in the EDID will be returned here. This is set to 0 |
| * if there is no physical address found. |
| * |
| * Return: the physical address or CEC_PHYS_ADDR_INVALID if there is none. |
| */ |
| u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size, |
| unsigned int *offset); |
| |
| void cec_fill_conn_info_from_drm(struct cec_connector_info *conn_info, |
| const struct drm_connector *connector); |
| |
| #else |
| |
| static inline int cec_register_adapter(struct cec_adapter *adap, |
| struct device *parent) |
| { |
| return 0; |
| } |
| |
| static inline void cec_unregister_adapter(struct cec_adapter *adap) |
| { |
| } |
| |
| static inline void cec_delete_adapter(struct cec_adapter *adap) |
| { |
| } |
| |
| static inline void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, |
| bool block) |
| { |
| } |
| |
| static inline void cec_s_phys_addr_from_edid(struct cec_adapter *adap, |
| const struct edid *edid) |
| { |
| } |
| |
| static inline u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size, |
| unsigned int *offset) |
| { |
| if (offset) |
| *offset = 0; |
| return CEC_PHYS_ADDR_INVALID; |
| } |
| |
| static inline void cec_s_conn_info(struct cec_adapter *adap, |
| const struct cec_connector_info *conn_info) |
| { |
| } |
| |
| static inline void |
| cec_fill_conn_info_from_drm(struct cec_connector_info *conn_info, |
| const struct drm_connector *connector) |
| { |
| memset(conn_info, 0, sizeof(*conn_info)); |
| } |
| |
| #endif |
| |
| #if IS_REACHABLE(CONFIG_CEC_CORE) && IS_ENABLED(CONFIG_CEC_NOTIFIER) |
| |
| /** |
| * cec_notifier_register - register a callback with the notifier |
| * @n: the CEC notifier |
| * @adap: the CEC adapter, passed as argument to the callback function |
| * @callback: the callback function |
| */ |
| void cec_notifier_register(struct cec_notifier *n, |
| struct cec_adapter *adap, |
| void (*callback)(struct cec_adapter *adap, u16 pa)); |
| |
| /** |
| * cec_notifier_unregister - unregister the callback from the notifier. |
| * @n: the CEC notifier |
| */ |
| void cec_notifier_unregister(struct cec_notifier *n); |
| |
| /** |
| * cec_register_cec_notifier - register the notifier with the cec adapter. |
| * @adap: the CEC adapter |
| * @notifier: the CEC notifier |
| */ |
| void cec_register_cec_notifier(struct cec_adapter *adap, |
| struct cec_notifier *notifier); |
| |
| #else |
| |
| static inline void |
| cec_notifier_register(struct cec_notifier *n, |
| struct cec_adapter *adap, |
| void (*callback)(struct cec_adapter *adap, u16 pa)) |
| { |
| } |
| |
| static inline void cec_notifier_unregister(struct cec_notifier *n) |
| { |
| } |
| |
| static inline void cec_register_cec_notifier(struct cec_adapter *adap, |
| struct cec_notifier *notifier) |
| { |
| } |
| |
| #endif |
| |
| /** |
| * cec_phys_addr_invalidate() - set the physical address to INVALID |
| * |
| * @adap: the CEC adapter |
| * |
| * This is a simple helper function to invalidate the physical |
| * address. |
| */ |
| static inline void cec_phys_addr_invalidate(struct cec_adapter *adap) |
| { |
| cec_s_phys_addr(adap, CEC_PHYS_ADDR_INVALID, false); |
| } |
| |
| /** |
| * cec_get_edid_spa_location() - find location of the Source Physical Address |
| * |
| * @edid: the EDID |
| * @size: the size of the EDID |
| * |
| * This EDID is expected to be a CEA-861 compliant, which means that there are |
| * at least two blocks and one or more of the extensions blocks are CEA-861 |
| * blocks. |
| * |
| * The returned location is guaranteed to be <= size-2. |
| * |
| * This is an inline function since it is used by both CEC and V4L2. |
| * Ideally this would go in a module shared by both, but it is overkill to do |
| * that for just a single function. |
| */ |
| static inline unsigned int cec_get_edid_spa_location(const u8 *edid, |
| unsigned int size) |
| { |
| unsigned int blocks = size / 128; |
| unsigned int block; |
| u8 d; |
| |
| /* Sanity check: at least 2 blocks and a multiple of the block size */ |
| if (blocks < 2 || size % 128) |
| return 0; |
| |
| /* |
| * If there are fewer extension blocks than the size, then update |
| * 'blocks'. It is allowed to have more extension blocks than the size, |
| * since some hardware can only read e.g. 256 bytes of the EDID, even |
| * though more blocks are present. The first CEA-861 extension block |
| * should normally be in block 1 anyway. |
| */ |
| if (edid[0x7e] + 1 < blocks) |
| blocks = edid[0x7e] + 1; |
| |
| for (block = 1; block < blocks; block++) { |
| unsigned int offset = block * 128; |
| |
| /* Skip any non-CEA-861 extension blocks */ |
| if (edid[offset] != 0x02 || edid[offset + 1] != 0x03) |
| continue; |
| |
| /* search Vendor Specific Data Block (tag 3) */ |
| d = edid[offset + 2] & 0x7f; |
| /* Check if there are Data Blocks */ |
| if (d <= 4) |
| continue; |
| if (d > 4) { |
| unsigned int i = offset + 4; |
| unsigned int end = offset + d; |
| |
| /* Note: 'end' is always < 'size' */ |
| do { |
| u8 tag = edid[i] >> 5; |
| u8 len = edid[i] & 0x1f; |
| |
| if (tag == 3 && len >= 5 && i + len <= end && |
| edid[i + 1] == 0x03 && |
| edid[i + 2] == 0x0c && |
| edid[i + 3] == 0x00) |
| return i + 4; |
| i += len + 1; |
| } while (i < end); |
| } |
| } |
| return 0; |
| } |
| |
| #endif /* _MEDIA_CEC_H */ |