| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * ld9040 AMOLED LCD drm_panel driver. |
| * |
| * Copyright (c) 2014 Samsung Electronics Co., Ltd |
| * Derived from drivers/video/backlight/ld9040.c |
| * |
| * Andrzej Hajda <a.hajda@samsung.com> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/spi/spi.h> |
| |
| #include <video/mipi_display.h> |
| #include <video/of_videomode.h> |
| #include <video/videomode.h> |
| |
| #include <drm/drm_modes.h> |
| #include <drm/drm_panel.h> |
| #include <drm/drm_print.h> |
| |
| /* Manufacturer Command Set */ |
| #define MCS_MANPWR 0xb0 |
| #define MCS_ELVSS_ON 0xb1 |
| #define MCS_USER_SETTING 0xf0 |
| #define MCS_DISPCTL 0xf2 |
| #define MCS_POWER_CTRL 0xf4 |
| #define MCS_GTCON 0xf7 |
| #define MCS_PANEL_CONDITION 0xf8 |
| #define MCS_GAMMA_SET1 0xf9 |
| #define MCS_GAMMA_CTRL 0xfb |
| |
| /* array of gamma tables for gamma value 2.2 */ |
| static u8 const ld9040_gammas[25][22] = { |
| { 0xf9, 0x00, 0x13, 0xb2, 0xba, 0xd2, 0x00, 0x30, 0x00, 0xaf, 0xc0, |
| 0xb8, 0xcd, 0x00, 0x3d, 0x00, 0xa8, 0xb8, 0xb7, 0xcd, 0x00, 0x44 }, |
| { 0xf9, 0x00, 0x13, 0xb9, 0xb9, 0xd0, 0x00, 0x3c, 0x00, 0xaf, 0xbf, |
| 0xb6, 0xcb, 0x00, 0x4b, 0x00, 0xa8, 0xb9, 0xb5, 0xcc, 0x00, 0x52 }, |
| { 0xf9, 0x00, 0x13, 0xba, 0xb9, 0xcd, 0x00, 0x41, 0x00, 0xb0, 0xbe, |
| 0xb5, 0xc9, 0x00, 0x51, 0x00, 0xa9, 0xb9, 0xb5, 0xca, 0x00, 0x57 }, |
| { 0xf9, 0x00, 0x13, 0xb9, 0xb8, 0xcd, 0x00, 0x46, 0x00, 0xb1, 0xbc, |
| 0xb5, 0xc8, 0x00, 0x56, 0x00, 0xaa, 0xb8, 0xb4, 0xc9, 0x00, 0x5d }, |
| { 0xf9, 0x00, 0x13, 0xba, 0xb8, 0xcb, 0x00, 0x4b, 0x00, 0xb3, 0xbc, |
| 0xb4, 0xc7, 0x00, 0x5c, 0x00, 0xac, 0xb8, 0xb4, 0xc8, 0x00, 0x62 }, |
| { 0xf9, 0x00, 0x13, 0xbb, 0xb7, 0xca, 0x00, 0x4f, 0x00, 0xb4, 0xbb, |
| 0xb3, 0xc7, 0x00, 0x60, 0x00, 0xad, 0xb8, 0xb4, 0xc7, 0x00, 0x67 }, |
| { 0xf9, 0x00, 0x47, 0xba, 0xb6, 0xca, 0x00, 0x53, 0x00, 0xb5, 0xbb, |
| 0xb3, 0xc6, 0x00, 0x65, 0x00, 0xae, 0xb8, 0xb3, 0xc7, 0x00, 0x6c }, |
| { 0xf9, 0x00, 0x71, 0xbb, 0xb5, 0xc8, 0x00, 0x57, 0x00, 0xb5, 0xbb, |
| 0xb0, 0xc5, 0x00, 0x6a, 0x00, 0xae, 0xb9, 0xb1, 0xc6, 0x00, 0x70 }, |
| { 0xf9, 0x00, 0x7b, 0xbb, 0xb4, 0xc8, 0x00, 0x5b, 0x00, 0xb5, 0xba, |
| 0xb1, 0xc4, 0x00, 0x6e, 0x00, 0xae, 0xb9, 0xb0, 0xc5, 0x00, 0x75 }, |
| { 0xf9, 0x00, 0x82, 0xba, 0xb4, 0xc7, 0x00, 0x5f, 0x00, 0xb5, 0xba, |
| 0xb0, 0xc3, 0x00, 0x72, 0x00, 0xae, 0xb8, 0xb0, 0xc3, 0x00, 0x7a }, |
| { 0xf9, 0x00, 0x89, 0xba, 0xb3, 0xc8, 0x00, 0x62, 0x00, 0xb6, 0xba, |
| 0xaf, 0xc3, 0x00, 0x76, 0x00, 0xaf, 0xb7, 0xae, 0xc4, 0x00, 0x7e }, |
| { 0xf9, 0x00, 0x8b, 0xb9, 0xb3, 0xc7, 0x00, 0x65, 0x00, 0xb7, 0xb8, |
| 0xaf, 0xc3, 0x00, 0x7a, 0x00, 0x80, 0xb6, 0xae, 0xc4, 0x00, 0x81 }, |
| { 0xf9, 0x00, 0x93, 0xba, 0xb3, 0xc5, 0x00, 0x69, 0x00, 0xb8, 0xb9, |
| 0xae, 0xc1, 0x00, 0x7f, 0x00, 0xb0, 0xb6, 0xae, 0xc3, 0x00, 0x85 }, |
| { 0xf9, 0x00, 0x97, 0xba, 0xb2, 0xc5, 0x00, 0x6c, 0x00, 0xb8, 0xb8, |
| 0xae, 0xc1, 0x00, 0x82, 0x00, 0xb0, 0xb6, 0xae, 0xc2, 0x00, 0x89 }, |
| { 0xf9, 0x00, 0x9a, 0xba, 0xb1, 0xc4, 0x00, 0x6f, 0x00, 0xb8, 0xb8, |
| 0xad, 0xc0, 0x00, 0x86, 0x00, 0xb0, 0xb7, 0xad, 0xc0, 0x00, 0x8d }, |
| { 0xf9, 0x00, 0x9c, 0xb9, 0xb0, 0xc4, 0x00, 0x72, 0x00, 0xb8, 0xb8, |
| 0xac, 0xbf, 0x00, 0x8a, 0x00, 0xb0, 0xb6, 0xac, 0xc0, 0x00, 0x91 }, |
| { 0xf9, 0x00, 0x9e, 0xba, 0xb0, 0xc2, 0x00, 0x75, 0x00, 0xb9, 0xb8, |
| 0xab, 0xbe, 0x00, 0x8e, 0x00, 0xb0, 0xb6, 0xac, 0xbf, 0x00, 0x94 }, |
| { 0xf9, 0x00, 0xa0, 0xb9, 0xaf, 0xc3, 0x00, 0x77, 0x00, 0xb9, 0xb7, |
| 0xab, 0xbe, 0x00, 0x90, 0x00, 0xb0, 0xb6, 0xab, 0xbf, 0x00, 0x97 }, |
| { 0xf9, 0x00, 0xa2, 0xb9, 0xaf, 0xc2, 0x00, 0x7a, 0x00, 0xb9, 0xb7, |
| 0xaa, 0xbd, 0x00, 0x94, 0x00, 0xb0, 0xb5, 0xab, 0xbf, 0x00, 0x9a }, |
| { 0xf9, 0x00, 0xa4, 0xb9, 0xaf, 0xc1, 0x00, 0x7d, 0x00, 0xb9, 0xb6, |
| 0xaa, 0xbb, 0x00, 0x97, 0x00, 0xb1, 0xb5, 0xaa, 0xbf, 0x00, 0x9d }, |
| { 0xf9, 0x00, 0xa4, 0xb8, 0xb0, 0xbf, 0x00, 0x80, 0x00, 0xb8, 0xb6, |
| 0xaa, 0xbc, 0x00, 0x9a, 0x00, 0xb0, 0xb5, 0xab, 0xbd, 0x00, 0xa0 }, |
| { 0xf9, 0x00, 0xa8, 0xb8, 0xae, 0xbe, 0x00, 0x84, 0x00, 0xb9, 0xb7, |
| 0xa8, 0xbc, 0x00, 0x9d, 0x00, 0xb2, 0xb5, 0xaa, 0xbc, 0x00, 0xa4 }, |
| { 0xf9, 0x00, 0xa9, 0xb6, 0xad, 0xbf, 0x00, 0x86, 0x00, 0xb8, 0xb5, |
| 0xa8, 0xbc, 0x00, 0xa0, 0x00, 0xb3, 0xb3, 0xa9, 0xbc, 0x00, 0xa7 }, |
| { 0xf9, 0x00, 0xa9, 0xb7, 0xae, 0xbd, 0x00, 0x89, 0x00, 0xb7, 0xb6, |
| 0xa8, 0xba, 0x00, 0xa4, 0x00, 0xb1, 0xb4, 0xaa, 0xbb, 0x00, 0xaa }, |
| { 0xf9, 0x00, 0xa7, 0xb4, 0xae, 0xbf, 0x00, 0x91, 0x00, 0xb2, 0xb4, |
| 0xaa, 0xbb, 0x00, 0xac, 0x00, 0xb3, 0xb1, 0xaa, 0xbc, 0x00, 0xb3 }, |
| }; |
| |
| struct ld9040 { |
| struct device *dev; |
| struct drm_panel panel; |
| |
| struct regulator_bulk_data supplies[2]; |
| struct gpio_desc *reset_gpio; |
| u32 power_on_delay; |
| u32 reset_delay; |
| struct videomode vm; |
| u32 width_mm; |
| u32 height_mm; |
| |
| int brightness; |
| |
| /* This field is tested by functions directly accessing bus before |
| * transfer, transfer is skipped if it is set. In case of transfer |
| * failure or unexpected response the field is set to error value. |
| * Such construct allows to eliminate many checks in higher level |
| * functions. |
| */ |
| int error; |
| }; |
| |
| static inline struct ld9040 *panel_to_ld9040(struct drm_panel *panel) |
| { |
| return container_of(panel, struct ld9040, panel); |
| } |
| |
| static int ld9040_clear_error(struct ld9040 *ctx) |
| { |
| int ret = ctx->error; |
| |
| ctx->error = 0; |
| return ret; |
| } |
| |
| static int ld9040_spi_write_word(struct ld9040 *ctx, u16 data) |
| { |
| struct spi_device *spi = to_spi_device(ctx->dev); |
| struct spi_transfer xfer = { |
| .len = 2, |
| .tx_buf = &data, |
| }; |
| struct spi_message msg; |
| |
| spi_message_init(&msg); |
| spi_message_add_tail(&xfer, &msg); |
| |
| return spi_sync(spi, &msg); |
| } |
| |
| static void ld9040_dcs_write(struct ld9040 *ctx, const u8 *data, size_t len) |
| { |
| int ret = 0; |
| |
| if (ctx->error < 0 || len == 0) |
| return; |
| |
| dev_dbg(ctx->dev, "writing dcs seq: %*ph\n", (int)len, data); |
| ret = ld9040_spi_write_word(ctx, *data); |
| |
| while (!ret && --len) { |
| ++data; |
| ret = ld9040_spi_write_word(ctx, *data | 0x100); |
| } |
| |
| if (ret) { |
| dev_err(ctx->dev, "error %d writing dcs seq: %*ph\n", ret, |
| (int)len, data); |
| ctx->error = ret; |
| } |
| |
| usleep_range(300, 310); |
| } |
| |
| #define ld9040_dcs_write_seq_static(ctx, seq...) \ |
| ({\ |
| static const u8 d[] = { seq };\ |
| ld9040_dcs_write(ctx, d, ARRAY_SIZE(d));\ |
| }) |
| |
| static void ld9040_brightness_set(struct ld9040 *ctx) |
| { |
| ld9040_dcs_write(ctx, ld9040_gammas[ctx->brightness], |
| ARRAY_SIZE(ld9040_gammas[ctx->brightness])); |
| |
| ld9040_dcs_write_seq_static(ctx, MCS_GAMMA_CTRL, 0x02, 0x5a); |
| } |
| |
| static void ld9040_init(struct ld9040 *ctx) |
| { |
| ld9040_dcs_write_seq_static(ctx, MCS_USER_SETTING, 0x5a, 0x5a); |
| ld9040_dcs_write_seq_static(ctx, MCS_PANEL_CONDITION, |
| 0x05, 0x65, 0x96, 0x71, 0x7d, 0x19, 0x3b, 0x0d, |
| 0x19, 0x7e, 0x0d, 0xe2, 0x00, 0x00, 0x7e, 0x7d, |
| 0x07, 0x07, 0x20, 0x20, 0x20, 0x02, 0x02); |
| ld9040_dcs_write_seq_static(ctx, MCS_DISPCTL, |
| 0x02, 0x08, 0x08, 0x10, 0x10); |
| ld9040_dcs_write_seq_static(ctx, MCS_MANPWR, 0x04); |
| ld9040_dcs_write_seq_static(ctx, MCS_POWER_CTRL, |
| 0x0a, 0x87, 0x25, 0x6a, 0x44, 0x02, 0x88); |
| ld9040_dcs_write_seq_static(ctx, MCS_ELVSS_ON, 0x0d, 0x00, 0x16); |
| ld9040_dcs_write_seq_static(ctx, MCS_GTCON, 0x09, 0x00, 0x00); |
| ld9040_brightness_set(ctx); |
| ld9040_dcs_write_seq_static(ctx, MIPI_DCS_EXIT_SLEEP_MODE); |
| ld9040_dcs_write_seq_static(ctx, MIPI_DCS_SET_DISPLAY_ON); |
| } |
| |
| static int ld9040_power_on(struct ld9040 *ctx) |
| { |
| int ret; |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); |
| if (ret < 0) |
| return ret; |
| |
| msleep(ctx->power_on_delay); |
| gpiod_set_value(ctx->reset_gpio, 0); |
| msleep(ctx->reset_delay); |
| gpiod_set_value(ctx->reset_gpio, 1); |
| msleep(ctx->reset_delay); |
| |
| return 0; |
| } |
| |
| static int ld9040_power_off(struct ld9040 *ctx) |
| { |
| return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); |
| } |
| |
| static int ld9040_disable(struct drm_panel *panel) |
| { |
| return 0; |
| } |
| |
| static int ld9040_unprepare(struct drm_panel *panel) |
| { |
| struct ld9040 *ctx = panel_to_ld9040(panel); |
| |
| msleep(120); |
| ld9040_dcs_write_seq_static(ctx, MIPI_DCS_SET_DISPLAY_OFF); |
| ld9040_dcs_write_seq_static(ctx, MIPI_DCS_ENTER_SLEEP_MODE); |
| msleep(40); |
| |
| ld9040_clear_error(ctx); |
| |
| return ld9040_power_off(ctx); |
| } |
| |
| static int ld9040_prepare(struct drm_panel *panel) |
| { |
| struct ld9040 *ctx = panel_to_ld9040(panel); |
| int ret; |
| |
| ret = ld9040_power_on(ctx); |
| if (ret < 0) |
| return ret; |
| |
| ld9040_init(ctx); |
| |
| ret = ld9040_clear_error(ctx); |
| |
| if (ret < 0) |
| ld9040_unprepare(panel); |
| |
| return ret; |
| } |
| |
| static int ld9040_enable(struct drm_panel *panel) |
| { |
| return 0; |
| } |
| |
| static int ld9040_get_modes(struct drm_panel *panel) |
| { |
| struct drm_connector *connector = panel->connector; |
| struct ld9040 *ctx = panel_to_ld9040(panel); |
| struct drm_display_mode *mode; |
| |
| mode = drm_mode_create(connector->dev); |
| if (!mode) { |
| DRM_ERROR("failed to create a new display mode\n"); |
| return 0; |
| } |
| |
| drm_display_mode_from_videomode(&ctx->vm, mode); |
| mode->width_mm = ctx->width_mm; |
| mode->height_mm = ctx->height_mm; |
| connector->display_info.width_mm = mode->width_mm; |
| connector->display_info.height_mm = mode->height_mm; |
| |
| mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; |
| drm_mode_probed_add(connector, mode); |
| |
| return 1; |
| } |
| |
| static const struct drm_panel_funcs ld9040_drm_funcs = { |
| .disable = ld9040_disable, |
| .unprepare = ld9040_unprepare, |
| .prepare = ld9040_prepare, |
| .enable = ld9040_enable, |
| .get_modes = ld9040_get_modes, |
| }; |
| |
| static int ld9040_parse_dt(struct ld9040 *ctx) |
| { |
| struct device *dev = ctx->dev; |
| struct device_node *np = dev->of_node; |
| int ret; |
| |
| ret = of_get_videomode(np, &ctx->vm, 0); |
| if (ret < 0) |
| return ret; |
| |
| of_property_read_u32(np, "power-on-delay", &ctx->power_on_delay); |
| of_property_read_u32(np, "reset-delay", &ctx->reset_delay); |
| of_property_read_u32(np, "panel-width-mm", &ctx->width_mm); |
| of_property_read_u32(np, "panel-height-mm", &ctx->height_mm); |
| |
| return 0; |
| } |
| |
| static int ld9040_probe(struct spi_device *spi) |
| { |
| struct device *dev = &spi->dev; |
| struct ld9040 *ctx; |
| int ret; |
| |
| ctx = devm_kzalloc(dev, sizeof(struct ld9040), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| |
| spi_set_drvdata(spi, ctx); |
| |
| ctx->dev = dev; |
| ctx->brightness = ARRAY_SIZE(ld9040_gammas) - 1; |
| |
| ret = ld9040_parse_dt(ctx); |
| if (ret < 0) |
| return ret; |
| |
| ctx->supplies[0].supply = "vdd3"; |
| ctx->supplies[1].supply = "vci"; |
| ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), |
| ctx->supplies); |
| if (ret < 0) |
| return ret; |
| |
| ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); |
| if (IS_ERR(ctx->reset_gpio)) { |
| dev_err(dev, "cannot get reset-gpios %ld\n", |
| PTR_ERR(ctx->reset_gpio)); |
| return PTR_ERR(ctx->reset_gpio); |
| } |
| |
| spi->bits_per_word = 9; |
| ret = spi_setup(spi); |
| if (ret < 0) { |
| dev_err(dev, "spi setup failed.\n"); |
| return ret; |
| } |
| |
| drm_panel_init(&ctx->panel); |
| ctx->panel.dev = dev; |
| ctx->panel.funcs = &ld9040_drm_funcs; |
| |
| return drm_panel_add(&ctx->panel); |
| } |
| |
| static int ld9040_remove(struct spi_device *spi) |
| { |
| struct ld9040 *ctx = spi_get_drvdata(spi); |
| |
| ld9040_power_off(ctx); |
| drm_panel_remove(&ctx->panel); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id ld9040_of_match[] = { |
| { .compatible = "samsung,ld9040" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, ld9040_of_match); |
| |
| static struct spi_driver ld9040_driver = { |
| .probe = ld9040_probe, |
| .remove = ld9040_remove, |
| .driver = { |
| .name = "panel-samsung-ld9040", |
| .of_match_table = ld9040_of_match, |
| }, |
| }; |
| module_spi_driver(ld9040_driver); |
| |
| MODULE_AUTHOR("Andrzej Hajda <a.hajda@samsung.com>"); |
| MODULE_DESCRIPTION("ld9040 LCD Driver"); |
| MODULE_LICENSE("GPL v2"); |