| /* |
| * drivers/net/phy/realtek.c |
| * |
| * Driver for Realtek PHYs |
| * |
| * Author: Johnson Leung <r58129@freescale.com> |
| * |
| * Copyright (c) 2004 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| #include <linux/bitops.h> |
| #include <linux/phy.h> |
| #include <linux/module.h> |
| |
| #define RTL821x_PHYSR 0x11 |
| #define RTL821x_PHYSR_DUPLEX BIT(13) |
| #define RTL821x_PHYSR_SPEED GENMASK(15, 14) |
| |
| #define RTL821x_INER 0x12 |
| #define RTL8211B_INER_INIT 0x6400 |
| #define RTL8211E_INER_LINK_STATUS BIT(10) |
| #define RTL8211F_INER_LINK_STATUS BIT(4) |
| |
| #define RTL821x_INSR 0x13 |
| |
| #define RTL821x_PAGE_SELECT 0x1f |
| |
| #define RTL8211F_INSR 0x1d |
| |
| #define RTL8211F_TX_DELAY BIT(8) |
| |
| #define RTL8201F_ISR 0x1e |
| #define RTL8201F_IER 0x13 |
| |
| #define RTL8366RB_POWER_SAVE 0x15 |
| #define RTL8366RB_POWER_SAVE_ON BIT(12) |
| |
| MODULE_DESCRIPTION("Realtek PHY driver"); |
| MODULE_AUTHOR("Johnson Leung"); |
| MODULE_LICENSE("GPL"); |
| |
| static int rtl821x_read_page(struct phy_device *phydev) |
| { |
| return __phy_read(phydev, RTL821x_PAGE_SELECT); |
| } |
| |
| static int rtl821x_write_page(struct phy_device *phydev, int page) |
| { |
| return __phy_write(phydev, RTL821x_PAGE_SELECT, page); |
| } |
| |
| static int rtl8201_ack_interrupt(struct phy_device *phydev) |
| { |
| int err; |
| |
| err = phy_read(phydev, RTL8201F_ISR); |
| |
| return (err < 0) ? err : 0; |
| } |
| |
| static int rtl821x_ack_interrupt(struct phy_device *phydev) |
| { |
| int err; |
| |
| err = phy_read(phydev, RTL821x_INSR); |
| |
| return (err < 0) ? err : 0; |
| } |
| |
| static int rtl8211f_ack_interrupt(struct phy_device *phydev) |
| { |
| int err; |
| |
| err = phy_read_paged(phydev, 0xa43, RTL8211F_INSR); |
| |
| return (err < 0) ? err : 0; |
| } |
| |
| static int rtl8201_config_intr(struct phy_device *phydev) |
| { |
| u16 val; |
| |
| if (phydev->interrupts == PHY_INTERRUPT_ENABLED) |
| val = BIT(13) | BIT(12) | BIT(11); |
| else |
| val = 0; |
| |
| return phy_write_paged(phydev, 0x7, RTL8201F_IER, val); |
| } |
| |
| static int rtl8211b_config_intr(struct phy_device *phydev) |
| { |
| int err; |
| |
| if (phydev->interrupts == PHY_INTERRUPT_ENABLED) |
| err = phy_write(phydev, RTL821x_INER, |
| RTL8211B_INER_INIT); |
| else |
| err = phy_write(phydev, RTL821x_INER, 0); |
| |
| return err; |
| } |
| |
| static int rtl8211e_config_intr(struct phy_device *phydev) |
| { |
| int err; |
| |
| if (phydev->interrupts == PHY_INTERRUPT_ENABLED) |
| err = phy_write(phydev, RTL821x_INER, |
| RTL8211E_INER_LINK_STATUS); |
| else |
| err = phy_write(phydev, RTL821x_INER, 0); |
| |
| return err; |
| } |
| |
| static int rtl8211f_config_intr(struct phy_device *phydev) |
| { |
| u16 val; |
| |
| if (phydev->interrupts == PHY_INTERRUPT_ENABLED) |
| val = RTL8211F_INER_LINK_STATUS; |
| else |
| val = 0; |
| |
| return phy_write_paged(phydev, 0xa42, RTL821x_INER, val); |
| } |
| |
| static int rtl8211_config_aneg(struct phy_device *phydev) |
| { |
| int ret; |
| |
| ret = genphy_config_aneg(phydev); |
| if (ret < 0) |
| return ret; |
| |
| /* Quirk was copied from vendor driver. Unfortunately it includes no |
| * description of the magic numbers. |
| */ |
| if (phydev->speed == SPEED_100 && phydev->autoneg == AUTONEG_DISABLE) { |
| phy_write(phydev, 0x17, 0x2138); |
| phy_write(phydev, 0x0e, 0x0260); |
| } else { |
| phy_write(phydev, 0x17, 0x2108); |
| phy_write(phydev, 0x0e, 0x0000); |
| } |
| |
| return 0; |
| } |
| |
| static int rtl8211c_config_init(struct phy_device *phydev) |
| { |
| /* RTL8211C has an issue when operating in Gigabit slave mode */ |
| phy_set_bits(phydev, MII_CTRL1000, |
| CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER); |
| |
| return genphy_config_init(phydev); |
| } |
| |
| static int rtl8211f_config_init(struct phy_device *phydev) |
| { |
| int ret; |
| u16 val = 0; |
| |
| ret = genphy_config_init(phydev); |
| if (ret < 0) |
| return ret; |
| |
| /* enable TX-delay for rgmii-id and rgmii-txid, otherwise disable it */ |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || |
| phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) |
| val = RTL8211F_TX_DELAY; |
| |
| return phy_modify_paged(phydev, 0xd08, 0x11, RTL8211F_TX_DELAY, val); |
| } |
| |
| static int rtl8211b_suspend(struct phy_device *phydev) |
| { |
| phy_write(phydev, MII_MMD_DATA, BIT(9)); |
| |
| return genphy_suspend(phydev); |
| } |
| |
| static int rtl8211b_resume(struct phy_device *phydev) |
| { |
| phy_write(phydev, MII_MMD_DATA, 0); |
| |
| return genphy_resume(phydev); |
| } |
| |
| static int rtl8366rb_config_init(struct phy_device *phydev) |
| { |
| int ret; |
| |
| ret = genphy_config_init(phydev); |
| if (ret < 0) |
| return ret; |
| |
| ret = phy_set_bits(phydev, RTL8366RB_POWER_SAVE, |
| RTL8366RB_POWER_SAVE_ON); |
| if (ret) { |
| dev_err(&phydev->mdio.dev, |
| "error enabling power management\n"); |
| } |
| |
| return ret; |
| } |
| |
| static struct phy_driver realtek_drvs[] = { |
| { |
| .phy_id = 0x00008201, |
| .name = "RTL8201CP Ethernet", |
| .phy_id_mask = 0x0000ffff, |
| .features = PHY_BASIC_FEATURES, |
| .flags = PHY_HAS_INTERRUPT, |
| }, { |
| .phy_id = 0x001cc816, |
| .name = "RTL8201F 10/100Mbps Ethernet", |
| .phy_id_mask = 0x001fffff, |
| .features = PHY_BASIC_FEATURES, |
| .flags = PHY_HAS_INTERRUPT, |
| .ack_interrupt = &rtl8201_ack_interrupt, |
| .config_intr = &rtl8201_config_intr, |
| .suspend = genphy_suspend, |
| .resume = genphy_resume, |
| .read_page = rtl821x_read_page, |
| .write_page = rtl821x_write_page, |
| }, { |
| .phy_id = 0x001cc910, |
| .name = "RTL8211 Gigabit Ethernet", |
| .phy_id_mask = 0x001fffff, |
| .features = PHY_GBIT_FEATURES, |
| .config_aneg = rtl8211_config_aneg, |
| .read_mmd = &genphy_read_mmd_unsupported, |
| .write_mmd = &genphy_write_mmd_unsupported, |
| }, { |
| .phy_id = 0x001cc912, |
| .name = "RTL8211B Gigabit Ethernet", |
| .phy_id_mask = 0x001fffff, |
| .features = PHY_GBIT_FEATURES, |
| .flags = PHY_HAS_INTERRUPT, |
| .ack_interrupt = &rtl821x_ack_interrupt, |
| .config_intr = &rtl8211b_config_intr, |
| .read_mmd = &genphy_read_mmd_unsupported, |
| .write_mmd = &genphy_write_mmd_unsupported, |
| .suspend = rtl8211b_suspend, |
| .resume = rtl8211b_resume, |
| }, { |
| .phy_id = 0x001cc913, |
| .name = "RTL8211C Gigabit Ethernet", |
| .phy_id_mask = 0x001fffff, |
| .features = PHY_GBIT_FEATURES, |
| .config_init = rtl8211c_config_init, |
| .read_mmd = &genphy_read_mmd_unsupported, |
| .write_mmd = &genphy_write_mmd_unsupported, |
| }, { |
| .phy_id = 0x001cc914, |
| .name = "RTL8211DN Gigabit Ethernet", |
| .phy_id_mask = 0x001fffff, |
| .features = PHY_GBIT_FEATURES, |
| .flags = PHY_HAS_INTERRUPT, |
| .ack_interrupt = rtl821x_ack_interrupt, |
| .config_intr = rtl8211e_config_intr, |
| .suspend = genphy_suspend, |
| .resume = genphy_resume, |
| }, { |
| .phy_id = 0x001cc915, |
| .name = "RTL8211E Gigabit Ethernet", |
| .phy_id_mask = 0x001fffff, |
| .features = PHY_GBIT_FEATURES, |
| .flags = PHY_HAS_INTERRUPT, |
| .ack_interrupt = &rtl821x_ack_interrupt, |
| .config_intr = &rtl8211e_config_intr, |
| .suspend = genphy_suspend, |
| .resume = genphy_resume, |
| }, { |
| .phy_id = 0x001cc916, |
| .name = "RTL8211F Gigabit Ethernet", |
| .phy_id_mask = 0x001fffff, |
| .features = PHY_GBIT_FEATURES, |
| .flags = PHY_HAS_INTERRUPT, |
| .config_init = &rtl8211f_config_init, |
| .ack_interrupt = &rtl8211f_ack_interrupt, |
| .config_intr = &rtl8211f_config_intr, |
| .suspend = genphy_suspend, |
| .resume = genphy_resume, |
| .read_page = rtl821x_read_page, |
| .write_page = rtl821x_write_page, |
| }, { |
| .phy_id = 0x001cc961, |
| .name = "RTL8366RB Gigabit Ethernet", |
| .phy_id_mask = 0x001fffff, |
| .features = PHY_GBIT_FEATURES, |
| .flags = PHY_HAS_INTERRUPT, |
| .config_init = &rtl8366rb_config_init, |
| .suspend = genphy_suspend, |
| .resume = genphy_resume, |
| }, |
| }; |
| |
| module_phy_driver(realtek_drvs); |
| |
| static struct mdio_device_id __maybe_unused realtek_tbl[] = { |
| { 0x001cc816, 0x001fffff }, |
| { 0x001cc910, 0x001fffff }, |
| { 0x001cc912, 0x001fffff }, |
| { 0x001cc913, 0x001fffff }, |
| { 0x001cc914, 0x001fffff }, |
| { 0x001cc915, 0x001fffff }, |
| { 0x001cc916, 0x001fffff }, |
| { 0x001cc961, 0x001fffff }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(mdio, realtek_tbl); |
