blob: 65c3b964ad1bf9d7b9b098e1d2cccf975a0ed327 [file] [log] [blame]
/*
* Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
* All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/pci.h>
#include <linux/delay.h>
#include "qib.h"
#include "qib_common.h"
/**
* qib_format_hwmsg - format a single hwerror message
* @msg message buffer
* @msgl length of message buffer
* @hwmsg message to add to message buffer
*/
static void qib_format_hwmsg(char *msg, size_t msgl, const char *hwmsg)
{
strlcat(msg, "[", msgl);
strlcat(msg, hwmsg, msgl);
strlcat(msg, "]", msgl);
}
/**
* qib_format_hwerrors - format hardware error messages for display
* @hwerrs hardware errors bit vector
* @hwerrmsgs hardware error descriptions
* @nhwerrmsgs number of hwerrmsgs
* @msg message buffer
* @msgl message buffer length
*/
void qib_format_hwerrors(u64 hwerrs, const struct qib_hwerror_msgs *hwerrmsgs,
size_t nhwerrmsgs, char *msg, size_t msgl)
{
int i;
for (i = 0; i < nhwerrmsgs; i++)
if (hwerrs & hwerrmsgs[i].mask)
qib_format_hwmsg(msg, msgl, hwerrmsgs[i].msg);
}
static void signal_ib_event(struct qib_pportdata *ppd, enum ib_event_type ev)
{
struct ib_event event;
struct qib_devdata *dd = ppd->dd;
event.device = &dd->verbs_dev.rdi.ibdev;
event.element.port_num = ppd->port;
event.event = ev;
ib_dispatch_event(&event);
}
void qib_handle_e_ibstatuschanged(struct qib_pportdata *ppd, u64 ibcs)
{
struct qib_devdata *dd = ppd->dd;
unsigned long flags;
u32 lstate;
u8 ltstate;
enum ib_event_type ev = 0;
lstate = dd->f_iblink_state(ibcs); /* linkstate */
ltstate = dd->f_ibphys_portstate(ibcs);
/*
* If linkstate transitions into INIT from any of the various down
* states, or if it transitions from any of the up (INIT or better)
* states into any of the down states (except link recovery), then
* call the chip-specific code to take appropriate actions.
*
* ppd->lflags could be 0 if this is the first time the interrupt
* handlers has been called but the link is already up.
*/
if (lstate >= IB_PORT_INIT &&
(!ppd->lflags || (ppd->lflags & QIBL_LINKDOWN)) &&
ltstate == IB_PHYSPORTSTATE_LINKUP) {
/* transitioned to UP */
if (dd->f_ib_updown(ppd, 1, ibcs))
goto skip_ibchange; /* chip-code handled */
} else if (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED |
QIBL_LINKACTIVE | QIBL_IB_FORCE_NOTIFY)) {
if (ltstate != IB_PHYSPORTSTATE_LINKUP &&
ltstate <= IB_PHYSPORTSTATE_CFG_TRAIN &&
dd->f_ib_updown(ppd, 0, ibcs))
goto skip_ibchange; /* chip-code handled */
qib_set_uevent_bits(ppd, _QIB_EVENT_LINKDOWN_BIT);
}
if (lstate != IB_PORT_DOWN) {
/* lstate is INIT, ARMED, or ACTIVE */
if (lstate != IB_PORT_ACTIVE) {
*ppd->statusp &= ~QIB_STATUS_IB_READY;
if (ppd->lflags & QIBL_LINKACTIVE)
ev = IB_EVENT_PORT_ERR;
spin_lock_irqsave(&ppd->lflags_lock, flags);
if (lstate == IB_PORT_ARMED) {
ppd->lflags |= QIBL_LINKARMED | QIBL_LINKV;
ppd->lflags &= ~(QIBL_LINKINIT |
QIBL_LINKDOWN | QIBL_LINKACTIVE);
} else {
ppd->lflags |= QIBL_LINKINIT | QIBL_LINKV;
ppd->lflags &= ~(QIBL_LINKARMED |
QIBL_LINKDOWN | QIBL_LINKACTIVE);
}
spin_unlock_irqrestore(&ppd->lflags_lock, flags);
/* start a 75msec timer to clear symbol errors */
mod_timer(&ppd->symerr_clear_timer,
msecs_to_jiffies(75));
} else if (ltstate == IB_PHYSPORTSTATE_LINKUP &&
!(ppd->lflags & QIBL_LINKACTIVE)) {
/* active, but not active defered */
qib_hol_up(ppd); /* useful only for 6120 now */
*ppd->statusp |=
QIB_STATUS_IB_READY | QIB_STATUS_IB_CONF;
qib_clear_symerror_on_linkup(&ppd->symerr_clear_timer);
spin_lock_irqsave(&ppd->lflags_lock, flags);
ppd->lflags |= QIBL_LINKACTIVE | QIBL_LINKV;
ppd->lflags &= ~(QIBL_LINKINIT |
QIBL_LINKDOWN | QIBL_LINKARMED);
spin_unlock_irqrestore(&ppd->lflags_lock, flags);
if (dd->flags & QIB_HAS_SEND_DMA)
qib_sdma_process_event(ppd,
qib_sdma_event_e30_go_running);
ev = IB_EVENT_PORT_ACTIVE;
dd->f_setextled(ppd, 1);
}
} else { /* down */
if (ppd->lflags & QIBL_LINKACTIVE)
ev = IB_EVENT_PORT_ERR;
spin_lock_irqsave(&ppd->lflags_lock, flags);
ppd->lflags |= QIBL_LINKDOWN | QIBL_LINKV;
ppd->lflags &= ~(QIBL_LINKINIT |
QIBL_LINKACTIVE | QIBL_LINKARMED);
spin_unlock_irqrestore(&ppd->lflags_lock, flags);
*ppd->statusp &= ~QIB_STATUS_IB_READY;
}
skip_ibchange:
ppd->lastibcstat = ibcs;
if (ev)
signal_ib_event(ppd, ev);
}
void qib_clear_symerror_on_linkup(struct timer_list *t)
{
struct qib_pportdata *ppd = from_timer(ppd, t, symerr_clear_timer);
if (ppd->lflags & QIBL_LINKACTIVE)
return;
ppd->ibport_data.z_symbol_error_counter =
ppd->dd->f_portcntr(ppd, QIBPORTCNTR_IBSYMBOLERR);
}
/*
* Handle receive interrupts for user ctxts; this means a user
* process was waiting for a packet to arrive, and didn't want
* to poll.
*/
void qib_handle_urcv(struct qib_devdata *dd, u64 ctxtr)
{
struct qib_ctxtdata *rcd;
unsigned long flags;
int i;
spin_lock_irqsave(&dd->uctxt_lock, flags);
for (i = dd->first_user_ctxt; dd->rcd && i < dd->cfgctxts; i++) {
if (!(ctxtr & (1ULL << i)))
continue;
rcd = dd->rcd[i];
if (!rcd || !rcd->cnt)
continue;
if (test_and_clear_bit(QIB_CTXT_WAITING_RCV, &rcd->flag)) {
wake_up_interruptible(&rcd->wait);
dd->f_rcvctrl(rcd->ppd, QIB_RCVCTRL_INTRAVAIL_DIS,
rcd->ctxt);
} else if (test_and_clear_bit(QIB_CTXT_WAITING_URG,
&rcd->flag)) {
rcd->urgent++;
wake_up_interruptible(&rcd->wait);
}
}
spin_unlock_irqrestore(&dd->uctxt_lock, flags);
}
void qib_bad_intrstatus(struct qib_devdata *dd)
{
static int allbits;
/* separate routine, for better optimization of qib_intr() */
/*
* We print the message and disable interrupts, in hope of
* having a better chance of debugging the problem.
*/
qib_dev_err(dd,
"Read of chip interrupt status failed disabling interrupts\n");
if (allbits++) {
/* disable interrupt delivery, something is very wrong */
if (allbits == 2)
dd->f_set_intr_state(dd, 0);
if (allbits == 3) {
qib_dev_err(dd,
"2nd bad interrupt status, unregistering interrupts\n");
dd->flags |= QIB_BADINTR;
dd->flags &= ~QIB_INITTED;
dd->f_free_irq(dd);
}
}
}