| /* SPDX-License-Identifier: GPL-2.0 */ |
| #ifndef RTL8180_H |
| #define RTL8180_H |
| |
| #include "rtl818x.h" |
| |
| #define MAX_RX_SIZE IEEE80211_MAX_RTS_THRESHOLD |
| |
| #define RF_PARAM_ANALOGPHY (1 << 0) |
| #define RF_PARAM_ANTBDEFAULT (1 << 1) |
| #define RF_PARAM_CARRIERSENSE1 (1 << 2) |
| #define RF_PARAM_CARRIERSENSE2 (1 << 3) |
| |
| #define BB_ANTATTEN_CHAN14 0x0C |
| #define BB_ANTENNA_B 0x40 |
| |
| #define BB_HOST_BANG (1 << 30) |
| #define BB_HOST_BANG_EN (1 << 2) |
| #define BB_HOST_BANG_CLK (1 << 1) |
| #define BB_HOST_BANG_DATA 1 |
| |
| #define ANAPARAM_TXDACOFF_SHIFT 27 |
| #define ANAPARAM_PWR0_SHIFT 28 |
| #define ANAPARAM_PWR0_MASK (0x07 << ANAPARAM_PWR0_SHIFT) |
| #define ANAPARAM_PWR1_SHIFT 20 |
| #define ANAPARAM_PWR1_MASK (0x7F << ANAPARAM_PWR1_SHIFT) |
| |
| /* rtl8180/rtl8185 have 3 queue + beacon queue. |
| * mac80211 can use just one, + beacon = 2 tot. |
| */ |
| #define RTL8180_NR_TX_QUEUES 2 |
| |
| /* rtl8187SE have 6 queues + beacon queues |
| * mac80211 can use 4 QoS data queue, + beacon = 5 tot |
| */ |
| #define RTL8187SE_NR_TX_QUEUES 5 |
| |
| /* for array static allocation, it is the max of above */ |
| #define RTL818X_NR_TX_QUEUES 5 |
| |
| struct rtl8180_tx_desc { |
| __le32 flags; |
| __le16 rts_duration; |
| __le16 plcp_len; |
| __le32 tx_buf; |
| union{ |
| __le32 frame_len; |
| struct { |
| __le16 frame_len_se; |
| __le16 frame_duration; |
| } __packed; |
| } __packed; |
| __le32 next_tx_desc; |
| u8 cw; |
| u8 retry_limit; |
| u8 agc; |
| u8 flags2; |
| /* rsvd for 8180/8185. |
| * valid for 8187se but we dont use it |
| */ |
| u32 reserved; |
| /* all rsvd for 8180/8185 */ |
| __le16 flags3; |
| __le16 frag_qsize; |
| } __packed; |
| |
| struct rtl818x_rx_cmd_desc { |
| __le32 flags; |
| u32 reserved; |
| __le32 rx_buf; |
| } __packed; |
| |
| struct rtl8180_rx_desc { |
| __le32 flags; |
| __le32 flags2; |
| __le64 tsft; |
| |
| } __packed; |
| |
| struct rtl8187se_rx_desc { |
| __le32 flags; |
| __le64 tsft; |
| __le32 flags2; |
| __le32 flags3; |
| u32 reserved[3]; |
| } __packed; |
| |
| struct rtl8180_tx_ring { |
| struct rtl8180_tx_desc *desc; |
| dma_addr_t dma; |
| unsigned int idx; |
| unsigned int entries; |
| struct sk_buff_head queue; |
| }; |
| |
| struct rtl8180_vif { |
| struct ieee80211_hw *dev; |
| |
| /* beaconing */ |
| struct delayed_work beacon_work; |
| bool enable_beacon; |
| }; |
| |
| struct rtl8180_priv { |
| /* common between rtl818x drivers */ |
| struct rtl818x_csr __iomem *map; |
| const struct rtl818x_rf_ops *rf; |
| struct ieee80211_vif *vif; |
| |
| /* rtl8180 driver specific */ |
| bool map_pio; |
| spinlock_t lock; |
| void *rx_ring; |
| u8 rx_ring_sz; |
| dma_addr_t rx_ring_dma; |
| unsigned int rx_idx; |
| struct sk_buff *rx_buf[32]; |
| struct rtl8180_tx_ring tx_ring[RTL818X_NR_TX_QUEUES]; |
| struct ieee80211_channel channels[14]; |
| struct ieee80211_rate rates[12]; |
| struct ieee80211_supported_band band; |
| struct ieee80211_tx_queue_params queue_param[4]; |
| struct pci_dev *pdev; |
| u32 rx_conf; |
| u8 slot_time; |
| u16 ack_time; |
| |
| enum { |
| RTL818X_CHIP_FAMILY_RTL8180, |
| RTL818X_CHIP_FAMILY_RTL8185, |
| RTL818X_CHIP_FAMILY_RTL8187SE, |
| } chip_family; |
| u32 anaparam; |
| u16 rfparam; |
| u8 csthreshold; |
| u8 mac_addr[ETH_ALEN]; |
| u8 rf_type; |
| u8 xtal_out; |
| u8 xtal_in; |
| u8 xtal_cal; |
| u8 thermal_meter_val; |
| u8 thermal_meter_en; |
| u8 antenna_diversity_en; |
| u8 antenna_diversity_default; |
| /* sequence # */ |
| u16 seqno; |
| }; |
| |
| void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data); |
| void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam); |
| void rtl8180_set_anaparam2(struct rtl8180_priv *priv, u32 anaparam2); |
| |
| static inline u8 rtl818x_ioread8(struct rtl8180_priv *priv, u8 __iomem *addr) |
| { |
| return ioread8(addr); |
| } |
| |
| static inline u16 rtl818x_ioread16(struct rtl8180_priv *priv, __le16 __iomem *addr) |
| { |
| return ioread16(addr); |
| } |
| |
| static inline u32 rtl818x_ioread32(struct rtl8180_priv *priv, __le32 __iomem *addr) |
| { |
| return ioread32(addr); |
| } |
| |
| static inline void rtl818x_iowrite8(struct rtl8180_priv *priv, |
| u8 __iomem *addr, u8 val) |
| { |
| iowrite8(val, addr); |
| } |
| |
| static inline void rtl818x_iowrite16(struct rtl8180_priv *priv, |
| __le16 __iomem *addr, u16 val) |
| { |
| iowrite16(val, addr); |
| } |
| |
| static inline void rtl818x_iowrite32(struct rtl8180_priv *priv, |
| __le32 __iomem *addr, u32 val) |
| { |
| iowrite32(val, addr); |
| } |
| |
| #endif /* RTL8180_H */ |