| /* |
| * Marvell Wireless LAN device driver: PCIE specific handling |
| * |
| * Copyright (C) 2011-2014, Marvell International Ltd. |
| * |
| * This software file (the "File") is distributed by Marvell International |
| * Ltd. under the terms of the GNU General Public License Version 2, June 1991 |
| * (the "License"). You may use, redistribute and/or modify this File in |
| * accordance with the terms and conditions of the License, a copy of which |
| * is available by writing to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the |
| * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. |
| * |
| * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE |
| * ARE EXPRESSLY DISCLAIMED. The License provides additional details about |
| * this warranty disclaimer. |
| */ |
| |
| #include <linux/firmware.h> |
| |
| #include "decl.h" |
| #include "ioctl.h" |
| #include "util.h" |
| #include "fw.h" |
| #include "main.h" |
| #include "wmm.h" |
| #include "11n.h" |
| #include "pcie.h" |
| |
| #define PCIE_VERSION "1.0" |
| #define DRV_NAME "Marvell mwifiex PCIe" |
| |
| static struct mwifiex_if_ops pcie_ops; |
| |
| static const struct of_device_id mwifiex_pcie_of_match_table[] = { |
| { .compatible = "pci11ab,2b42" }, |
| { .compatible = "pci1b4b,2b42" }, |
| { } |
| }; |
| |
| static int mwifiex_pcie_probe_of(struct device *dev) |
| { |
| if (!of_match_node(mwifiex_pcie_of_match_table, dev->of_node)) { |
| dev_err(dev, "required compatible string missing\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void mwifiex_pcie_work(struct work_struct *work); |
| |
| static int |
| mwifiex_map_pci_memory(struct mwifiex_adapter *adapter, struct sk_buff *skb, |
| size_t size, int flags) |
| { |
| struct pcie_service_card *card = adapter->card; |
| struct mwifiex_dma_mapping mapping; |
| |
| mapping.addr = pci_map_single(card->dev, skb->data, size, flags); |
| if (pci_dma_mapping_error(card->dev, mapping.addr)) { |
| mwifiex_dbg(adapter, ERROR, "failed to map pci memory!\n"); |
| return -1; |
| } |
| mapping.len = size; |
| mwifiex_store_mapping(skb, &mapping); |
| return 0; |
| } |
| |
| static void mwifiex_unmap_pci_memory(struct mwifiex_adapter *adapter, |
| struct sk_buff *skb, int flags) |
| { |
| struct pcie_service_card *card = adapter->card; |
| struct mwifiex_dma_mapping mapping; |
| |
| mwifiex_get_mapping(skb, &mapping); |
| pci_unmap_single(card->dev, mapping.addr, mapping.len, flags); |
| } |
| |
| /* |
| * This function writes data into PCIE card register. |
| */ |
| static int mwifiex_write_reg(struct mwifiex_adapter *adapter, int reg, u32 data) |
| { |
| struct pcie_service_card *card = adapter->card; |
| |
| iowrite32(data, card->pci_mmap1 + reg); |
| |
| return 0; |
| } |
| |
| /* This function reads data from PCIE card register. |
| */ |
| static int mwifiex_read_reg(struct mwifiex_adapter *adapter, int reg, u32 *data) |
| { |
| struct pcie_service_card *card = adapter->card; |
| |
| *data = ioread32(card->pci_mmap1 + reg); |
| if (*data == 0xffffffff) |
| return 0xffffffff; |
| |
| return 0; |
| } |
| |
| /* This function reads u8 data from PCIE card register. */ |
| static int mwifiex_read_reg_byte(struct mwifiex_adapter *adapter, |
| int reg, u8 *data) |
| { |
| struct pcie_service_card *card = adapter->card; |
| |
| *data = ioread8(card->pci_mmap1 + reg); |
| |
| return 0; |
| } |
| |
| /* |
| * This function reads sleep cookie and checks if FW is ready |
| */ |
| static bool mwifiex_pcie_ok_to_access_hw(struct mwifiex_adapter *adapter) |
| { |
| u32 cookie_value; |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| |
| if (!reg->sleep_cookie) |
| return true; |
| |
| if (card->sleep_cookie_vbase) { |
| cookie_value = get_unaligned_le32(card->sleep_cookie_vbase); |
| mwifiex_dbg(adapter, INFO, |
| "info: ACCESS_HW: sleep cookie=0x%x\n", |
| cookie_value); |
| if (cookie_value == FW_AWAKE_COOKIE) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| /* |
| * Kernel needs to suspend all functions separately. Therefore all |
| * registered functions must have drivers with suspend and resume |
| * methods. Failing that the kernel simply removes the whole card. |
| * |
| * If already not suspended, this function allocates and sends a host |
| * sleep activate request to the firmware and turns off the traffic. |
| */ |
| static int mwifiex_pcie_suspend(struct device *dev) |
| { |
| struct mwifiex_adapter *adapter; |
| struct pcie_service_card *card; |
| struct pci_dev *pdev = to_pci_dev(dev); |
| |
| card = pci_get_drvdata(pdev); |
| |
| /* Might still be loading firmware */ |
| wait_for_completion(&card->fw_done); |
| |
| adapter = card->adapter; |
| if (!adapter) { |
| dev_err(dev, "adapter is not valid\n"); |
| return 0; |
| } |
| |
| mwifiex_enable_wake(adapter); |
| |
| /* Enable the Host Sleep */ |
| if (!mwifiex_enable_hs(adapter)) { |
| mwifiex_dbg(adapter, ERROR, |
| "cmd: failed to suspend\n"); |
| clear_bit(MWIFIEX_IS_HS_ENABLING, &adapter->work_flags); |
| mwifiex_disable_wake(adapter); |
| return -EFAULT; |
| } |
| |
| flush_workqueue(adapter->workqueue); |
| |
| /* Indicate device suspended */ |
| set_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags); |
| clear_bit(MWIFIEX_IS_HS_ENABLING, &adapter->work_flags); |
| |
| return 0; |
| } |
| |
| /* |
| * Kernel needs to suspend all functions separately. Therefore all |
| * registered functions must have drivers with suspend and resume |
| * methods. Failing that the kernel simply removes the whole card. |
| * |
| * If already not resumed, this function turns on the traffic and |
| * sends a host sleep cancel request to the firmware. |
| */ |
| static int mwifiex_pcie_resume(struct device *dev) |
| { |
| struct mwifiex_adapter *adapter; |
| struct pcie_service_card *card; |
| struct pci_dev *pdev = to_pci_dev(dev); |
| |
| card = pci_get_drvdata(pdev); |
| |
| if (!card->adapter) { |
| dev_err(dev, "adapter structure is not valid\n"); |
| return 0; |
| } |
| |
| adapter = card->adapter; |
| |
| if (!test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) { |
| mwifiex_dbg(adapter, WARN, |
| "Device already resumed\n"); |
| return 0; |
| } |
| |
| clear_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags); |
| |
| mwifiex_cancel_hs(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA), |
| MWIFIEX_ASYNC_CMD); |
| mwifiex_disable_wake(adapter); |
| |
| return 0; |
| } |
| #endif |
| |
| /* |
| * This function probes an mwifiex device and registers it. It allocates |
| * the card structure, enables PCIE function number and initiates the |
| * device registration and initialization procedure by adding a logical |
| * interface. |
| */ |
| static int mwifiex_pcie_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct pcie_service_card *card; |
| int ret; |
| |
| pr_debug("info: vendor=0x%4.04X device=0x%4.04X rev=%d\n", |
| pdev->vendor, pdev->device, pdev->revision); |
| |
| card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL); |
| if (!card) |
| return -ENOMEM; |
| |
| init_completion(&card->fw_done); |
| |
| card->dev = pdev; |
| |
| if (ent->driver_data) { |
| struct mwifiex_pcie_device *data = (void *)ent->driver_data; |
| card->pcie.reg = data->reg; |
| card->pcie.blksz_fw_dl = data->blksz_fw_dl; |
| card->pcie.tx_buf_size = data->tx_buf_size; |
| card->pcie.can_dump_fw = data->can_dump_fw; |
| card->pcie.mem_type_mapping_tbl = data->mem_type_mapping_tbl; |
| card->pcie.num_mem_types = data->num_mem_types; |
| card->pcie.can_ext_scan = data->can_ext_scan; |
| INIT_WORK(&card->work, mwifiex_pcie_work); |
| } |
| |
| /* device tree node parsing and platform specific configuration*/ |
| if (pdev->dev.of_node) { |
| ret = mwifiex_pcie_probe_of(&pdev->dev); |
| if (ret) |
| return ret; |
| } |
| |
| if (mwifiex_add_card(card, &card->fw_done, &pcie_ops, |
| MWIFIEX_PCIE, &pdev->dev)) { |
| pr_err("%s failed\n", __func__); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * This function removes the interface and frees up the card structure. |
| */ |
| static void mwifiex_pcie_remove(struct pci_dev *pdev) |
| { |
| struct pcie_service_card *card; |
| struct mwifiex_adapter *adapter; |
| struct mwifiex_private *priv; |
| const struct mwifiex_pcie_card_reg *reg; |
| u32 fw_status; |
| int ret; |
| |
| card = pci_get_drvdata(pdev); |
| |
| wait_for_completion(&card->fw_done); |
| |
| adapter = card->adapter; |
| if (!adapter || !adapter->priv_num) |
| return; |
| |
| reg = card->pcie.reg; |
| if (reg) |
| ret = mwifiex_read_reg(adapter, reg->fw_status, &fw_status); |
| else |
| fw_status = -1; |
| |
| if (fw_status == FIRMWARE_READY_PCIE && !adapter->mfg_mode) { |
| mwifiex_deauthenticate_all(adapter); |
| |
| priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); |
| |
| mwifiex_disable_auto_ds(priv); |
| |
| mwifiex_init_shutdown_fw(priv, MWIFIEX_FUNC_SHUTDOWN); |
| } |
| |
| mwifiex_remove_card(adapter); |
| } |
| |
| static void mwifiex_pcie_shutdown(struct pci_dev *pdev) |
| { |
| mwifiex_pcie_remove(pdev); |
| |
| return; |
| } |
| |
| static void mwifiex_pcie_coredump(struct device *dev) |
| { |
| struct pci_dev *pdev; |
| struct pcie_service_card *card; |
| |
| pdev = container_of(dev, struct pci_dev, dev); |
| card = pci_get_drvdata(pdev); |
| |
| if (!test_and_set_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, |
| &card->work_flags)) |
| schedule_work(&card->work); |
| } |
| |
| static const struct pci_device_id mwifiex_ids[] = { |
| { |
| PCIE_VENDOR_ID_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8766P, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| .driver_data = (unsigned long)&mwifiex_pcie8766, |
| }, |
| { |
| PCIE_VENDOR_ID_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8897, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| .driver_data = (unsigned long)&mwifiex_pcie8897, |
| }, |
| { |
| PCIE_VENDOR_ID_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8997, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| .driver_data = (unsigned long)&mwifiex_pcie8997, |
| }, |
| { |
| PCIE_VENDOR_ID_V2_MARVELL, PCIE_DEVICE_ID_MARVELL_88W8997, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| .driver_data = (unsigned long)&mwifiex_pcie8997, |
| }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, mwifiex_ids); |
| |
| /* |
| * Cleanup all software without cleaning anything related to PCIe and HW. |
| */ |
| static void mwifiex_pcie_reset_prepare(struct pci_dev *pdev) |
| { |
| struct pcie_service_card *card = pci_get_drvdata(pdev); |
| struct mwifiex_adapter *adapter = card->adapter; |
| |
| if (!adapter) { |
| dev_err(&pdev->dev, "%s: adapter structure is not valid\n", |
| __func__); |
| return; |
| } |
| |
| mwifiex_dbg(adapter, INFO, |
| "%s: vendor=0x%4.04x device=0x%4.04x rev=%d Pre-FLR\n", |
| __func__, pdev->vendor, pdev->device, pdev->revision); |
| |
| mwifiex_shutdown_sw(adapter); |
| clear_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &card->work_flags); |
| clear_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &card->work_flags); |
| mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__); |
| } |
| |
| /* |
| * Kernel stores and restores PCIe function context before and after performing |
| * FLR respectively. Reconfigure the software and firmware including firmware |
| * redownload. |
| */ |
| static void mwifiex_pcie_reset_done(struct pci_dev *pdev) |
| { |
| struct pcie_service_card *card = pci_get_drvdata(pdev); |
| struct mwifiex_adapter *adapter = card->adapter; |
| int ret; |
| |
| if (!adapter) { |
| dev_err(&pdev->dev, "%s: adapter structure is not valid\n", |
| __func__); |
| return; |
| } |
| |
| mwifiex_dbg(adapter, INFO, |
| "%s: vendor=0x%4.04x device=0x%4.04x rev=%d Post-FLR\n", |
| __func__, pdev->vendor, pdev->device, pdev->revision); |
| |
| ret = mwifiex_reinit_sw(adapter); |
| if (ret) |
| dev_err(&pdev->dev, "reinit failed: %d\n", ret); |
| else |
| mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__); |
| } |
| |
| static const struct pci_error_handlers mwifiex_pcie_err_handler = { |
| .reset_prepare = mwifiex_pcie_reset_prepare, |
| .reset_done = mwifiex_pcie_reset_done, |
| }; |
| |
| #ifdef CONFIG_PM_SLEEP |
| /* Power Management Hooks */ |
| static SIMPLE_DEV_PM_OPS(mwifiex_pcie_pm_ops, mwifiex_pcie_suspend, |
| mwifiex_pcie_resume); |
| #endif |
| |
| /* PCI Device Driver */ |
| static struct pci_driver __refdata mwifiex_pcie = { |
| .name = "mwifiex_pcie", |
| .id_table = mwifiex_ids, |
| .probe = mwifiex_pcie_probe, |
| .remove = mwifiex_pcie_remove, |
| .driver = { |
| .coredump = mwifiex_pcie_coredump, |
| #ifdef CONFIG_PM_SLEEP |
| .pm = &mwifiex_pcie_pm_ops, |
| #endif |
| }, |
| .shutdown = mwifiex_pcie_shutdown, |
| .err_handler = &mwifiex_pcie_err_handler, |
| }; |
| |
| /* |
| * This function adds delay loop to ensure FW is awake before proceeding. |
| */ |
| static void mwifiex_pcie_dev_wakeup_delay(struct mwifiex_adapter *adapter) |
| { |
| int i = 0; |
| |
| while (mwifiex_pcie_ok_to_access_hw(adapter)) { |
| i++; |
| usleep_range(10, 20); |
| /* 50ms max wait */ |
| if (i == 5000) |
| break; |
| } |
| |
| return; |
| } |
| |
| static void mwifiex_delay_for_sleep_cookie(struct mwifiex_adapter *adapter, |
| u32 max_delay_loop_cnt) |
| { |
| struct pcie_service_card *card = adapter->card; |
| u8 *buffer; |
| u32 sleep_cookie, count; |
| struct sk_buff *cmdrsp = card->cmdrsp_buf; |
| |
| for (count = 0; count < max_delay_loop_cnt; count++) { |
| pci_dma_sync_single_for_cpu(card->dev, |
| MWIFIEX_SKB_DMA_ADDR(cmdrsp), |
| sizeof(sleep_cookie), |
| PCI_DMA_FROMDEVICE); |
| buffer = cmdrsp->data; |
| sleep_cookie = get_unaligned_le32(buffer); |
| |
| if (sleep_cookie == MWIFIEX_DEF_SLEEP_COOKIE) { |
| mwifiex_dbg(adapter, INFO, |
| "sleep cookie found at count %d\n", count); |
| break; |
| } |
| pci_dma_sync_single_for_device(card->dev, |
| MWIFIEX_SKB_DMA_ADDR(cmdrsp), |
| sizeof(sleep_cookie), |
| PCI_DMA_FROMDEVICE); |
| usleep_range(20, 30); |
| } |
| |
| if (count >= max_delay_loop_cnt) |
| mwifiex_dbg(adapter, INFO, |
| "max count reached while accessing sleep cookie\n"); |
| } |
| |
| /* This function wakes up the card by reading fw_status register. */ |
| static int mwifiex_pm_wakeup_card(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| |
| mwifiex_dbg(adapter, EVENT, |
| "event: Wakeup device...\n"); |
| |
| if (reg->sleep_cookie) |
| mwifiex_pcie_dev_wakeup_delay(adapter); |
| |
| /* Accessing fw_status register will wakeup device */ |
| if (mwifiex_write_reg(adapter, reg->fw_status, FIRMWARE_READY_PCIE)) { |
| mwifiex_dbg(adapter, ERROR, |
| "Writing fw_status register failed\n"); |
| return -1; |
| } |
| |
| if (reg->sleep_cookie) { |
| mwifiex_pcie_dev_wakeup_delay(adapter); |
| mwifiex_dbg(adapter, INFO, |
| "PCIE wakeup: Setting PS_STATE_AWAKE\n"); |
| adapter->ps_state = PS_STATE_AWAKE; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * This function is called after the card has woken up. |
| * |
| * The card configuration register is reset. |
| */ |
| static int mwifiex_pm_wakeup_card_complete(struct mwifiex_adapter *adapter) |
| { |
| mwifiex_dbg(adapter, CMD, |
| "cmd: Wakeup device completed\n"); |
| |
| return 0; |
| } |
| |
| /* |
| * This function disables the host interrupt. |
| * |
| * The host interrupt mask is read, the disable bit is reset and |
| * written back to the card host interrupt mask register. |
| */ |
| static int mwifiex_pcie_disable_host_int(struct mwifiex_adapter *adapter) |
| { |
| if (mwifiex_pcie_ok_to_access_hw(adapter)) { |
| if (mwifiex_write_reg(adapter, PCIE_HOST_INT_MASK, |
| 0x00000000)) { |
| mwifiex_dbg(adapter, ERROR, |
| "Disable host interrupt failed\n"); |
| return -1; |
| } |
| } |
| |
| atomic_set(&adapter->tx_hw_pending, 0); |
| return 0; |
| } |
| |
| static void mwifiex_pcie_disable_host_int_noerr(struct mwifiex_adapter *adapter) |
| { |
| WARN_ON(mwifiex_pcie_disable_host_int(adapter)); |
| } |
| |
| /* |
| * This function enables the host interrupt. |
| * |
| * The host interrupt enable mask is written to the card |
| * host interrupt mask register. |
| */ |
| static int mwifiex_pcie_enable_host_int(struct mwifiex_adapter *adapter) |
| { |
| if (mwifiex_pcie_ok_to_access_hw(adapter)) { |
| /* Simply write the mask to the register */ |
| if (mwifiex_write_reg(adapter, PCIE_HOST_INT_MASK, |
| HOST_INTR_MASK)) { |
| mwifiex_dbg(adapter, ERROR, |
| "Enable host interrupt failed\n"); |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * This function initializes TX buffer ring descriptors |
| */ |
| static int mwifiex_init_txq_ring(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| struct mwifiex_pcie_buf_desc *desc; |
| struct mwifiex_pfu_buf_desc *desc2; |
| int i; |
| |
| for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { |
| card->tx_buf_list[i] = NULL; |
| if (reg->pfu_enabled) { |
| card->txbd_ring[i] = (void *)card->txbd_ring_vbase + |
| (sizeof(*desc2) * i); |
| desc2 = card->txbd_ring[i]; |
| memset(desc2, 0, sizeof(*desc2)); |
| } else { |
| card->txbd_ring[i] = (void *)card->txbd_ring_vbase + |
| (sizeof(*desc) * i); |
| desc = card->txbd_ring[i]; |
| memset(desc, 0, sizeof(*desc)); |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* This function initializes RX buffer ring descriptors. Each SKB is allocated |
| * here and after mapping PCI memory, its physical address is assigned to |
| * PCIE Rx buffer descriptor's physical address. |
| */ |
| static int mwifiex_init_rxq_ring(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| struct sk_buff *skb; |
| struct mwifiex_pcie_buf_desc *desc; |
| struct mwifiex_pfu_buf_desc *desc2; |
| dma_addr_t buf_pa; |
| int i; |
| |
| for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { |
| /* Allocate skb here so that firmware can DMA data from it */ |
| skb = mwifiex_alloc_dma_align_buf(MWIFIEX_RX_DATA_BUF_SIZE, |
| GFP_KERNEL); |
| if (!skb) { |
| mwifiex_dbg(adapter, ERROR, |
| "Unable to allocate skb for RX ring.\n"); |
| kfree(card->rxbd_ring_vbase); |
| return -ENOMEM; |
| } |
| |
| if (mwifiex_map_pci_memory(adapter, skb, |
| MWIFIEX_RX_DATA_BUF_SIZE, |
| PCI_DMA_FROMDEVICE)) |
| return -1; |
| |
| buf_pa = MWIFIEX_SKB_DMA_ADDR(skb); |
| |
| mwifiex_dbg(adapter, INFO, |
| "info: RX ring: skb=%p len=%d data=%p buf_pa=%#x:%x\n", |
| skb, skb->len, skb->data, (u32)buf_pa, |
| (u32)((u64)buf_pa >> 32)); |
| |
| card->rx_buf_list[i] = skb; |
| if (reg->pfu_enabled) { |
| card->rxbd_ring[i] = (void *)card->rxbd_ring_vbase + |
| (sizeof(*desc2) * i); |
| desc2 = card->rxbd_ring[i]; |
| desc2->paddr = buf_pa; |
| desc2->len = (u16)skb->len; |
| desc2->frag_len = (u16)skb->len; |
| desc2->flags = reg->ring_flag_eop | reg->ring_flag_sop; |
| desc2->offset = 0; |
| } else { |
| card->rxbd_ring[i] = (void *)(card->rxbd_ring_vbase + |
| (sizeof(*desc) * i)); |
| desc = card->rxbd_ring[i]; |
| desc->paddr = buf_pa; |
| desc->len = (u16)skb->len; |
| desc->flags = 0; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* This function initializes event buffer ring descriptors. Each SKB is |
| * allocated here and after mapping PCI memory, its physical address is assigned |
| * to PCIE Rx buffer descriptor's physical address |
| */ |
| static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| struct mwifiex_evt_buf_desc *desc; |
| struct sk_buff *skb; |
| dma_addr_t buf_pa; |
| int i; |
| |
| for (i = 0; i < MWIFIEX_MAX_EVT_BD; i++) { |
| /* Allocate skb here so that firmware can DMA data from it */ |
| skb = dev_alloc_skb(MAX_EVENT_SIZE); |
| if (!skb) { |
| mwifiex_dbg(adapter, ERROR, |
| "Unable to allocate skb for EVENT buf.\n"); |
| kfree(card->evtbd_ring_vbase); |
| return -ENOMEM; |
| } |
| skb_put(skb, MAX_EVENT_SIZE); |
| |
| if (mwifiex_map_pci_memory(adapter, skb, MAX_EVENT_SIZE, |
| PCI_DMA_FROMDEVICE)) |
| return -1; |
| |
| buf_pa = MWIFIEX_SKB_DMA_ADDR(skb); |
| |
| mwifiex_dbg(adapter, EVENT, |
| "info: EVT ring: skb=%p len=%d data=%p buf_pa=%#x:%x\n", |
| skb, skb->len, skb->data, (u32)buf_pa, |
| (u32)((u64)buf_pa >> 32)); |
| |
| card->evt_buf_list[i] = skb; |
| card->evtbd_ring[i] = (void *)(card->evtbd_ring_vbase + |
| (sizeof(*desc) * i)); |
| desc = card->evtbd_ring[i]; |
| desc->paddr = buf_pa; |
| desc->len = (u16)skb->len; |
| desc->flags = 0; |
| } |
| |
| return 0; |
| } |
| |
| /* This function cleans up TX buffer rings. If any of the buffer list has valid |
| * SKB address, associated SKB is freed. |
| */ |
| static void mwifiex_cleanup_txq_ring(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| struct sk_buff *skb; |
| struct mwifiex_pcie_buf_desc *desc; |
| struct mwifiex_pfu_buf_desc *desc2; |
| int i; |
| |
| for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { |
| if (reg->pfu_enabled) { |
| desc2 = card->txbd_ring[i]; |
| if (card->tx_buf_list[i]) { |
| skb = card->tx_buf_list[i]; |
| mwifiex_unmap_pci_memory(adapter, skb, |
| PCI_DMA_TODEVICE); |
| dev_kfree_skb_any(skb); |
| } |
| memset(desc2, 0, sizeof(*desc2)); |
| } else { |
| desc = card->txbd_ring[i]; |
| if (card->tx_buf_list[i]) { |
| skb = card->tx_buf_list[i]; |
| mwifiex_unmap_pci_memory(adapter, skb, |
| PCI_DMA_TODEVICE); |
| dev_kfree_skb_any(skb); |
| } |
| memset(desc, 0, sizeof(*desc)); |
| } |
| card->tx_buf_list[i] = NULL; |
| } |
| |
| atomic_set(&adapter->tx_hw_pending, 0); |
| return; |
| } |
| |
| /* This function cleans up RX buffer rings. If any of the buffer list has valid |
| * SKB address, associated SKB is freed. |
| */ |
| static void mwifiex_cleanup_rxq_ring(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| struct mwifiex_pcie_buf_desc *desc; |
| struct mwifiex_pfu_buf_desc *desc2; |
| struct sk_buff *skb; |
| int i; |
| |
| for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { |
| if (reg->pfu_enabled) { |
| desc2 = card->rxbd_ring[i]; |
| if (card->rx_buf_list[i]) { |
| skb = card->rx_buf_list[i]; |
| mwifiex_unmap_pci_memory(adapter, skb, |
| PCI_DMA_FROMDEVICE); |
| dev_kfree_skb_any(skb); |
| } |
| memset(desc2, 0, sizeof(*desc2)); |
| } else { |
| desc = card->rxbd_ring[i]; |
| if (card->rx_buf_list[i]) { |
| skb = card->rx_buf_list[i]; |
| mwifiex_unmap_pci_memory(adapter, skb, |
| PCI_DMA_FROMDEVICE); |
| dev_kfree_skb_any(skb); |
| } |
| memset(desc, 0, sizeof(*desc)); |
| } |
| card->rx_buf_list[i] = NULL; |
| } |
| |
| return; |
| } |
| |
| /* This function cleans up event buffer rings. If any of the buffer list has |
| * valid SKB address, associated SKB is freed. |
| */ |
| static void mwifiex_cleanup_evt_ring(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| struct mwifiex_evt_buf_desc *desc; |
| struct sk_buff *skb; |
| int i; |
| |
| for (i = 0; i < MWIFIEX_MAX_EVT_BD; i++) { |
| desc = card->evtbd_ring[i]; |
| if (card->evt_buf_list[i]) { |
| skb = card->evt_buf_list[i]; |
| mwifiex_unmap_pci_memory(adapter, skb, |
| PCI_DMA_FROMDEVICE); |
| dev_kfree_skb_any(skb); |
| } |
| card->evt_buf_list[i] = NULL; |
| memset(desc, 0, sizeof(*desc)); |
| } |
| |
| return; |
| } |
| |
| /* This function creates buffer descriptor ring for TX |
| */ |
| static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| |
| /* |
| * driver maintaines the write pointer and firmware maintaines the read |
| * pointer. The write pointer starts at 0 (zero) while the read pointer |
| * starts at zero with rollover bit set |
| */ |
| card->txbd_wrptr = 0; |
| |
| if (reg->pfu_enabled) |
| card->txbd_rdptr = 0; |
| else |
| card->txbd_rdptr |= reg->tx_rollover_ind; |
| |
| /* allocate shared memory for the BD ring and divide the same in to |
| several descriptors */ |
| if (reg->pfu_enabled) |
| card->txbd_ring_size = sizeof(struct mwifiex_pfu_buf_desc) * |
| MWIFIEX_MAX_TXRX_BD; |
| else |
| card->txbd_ring_size = sizeof(struct mwifiex_pcie_buf_desc) * |
| MWIFIEX_MAX_TXRX_BD; |
| |
| mwifiex_dbg(adapter, INFO, |
| "info: txbd_ring: Allocating %d bytes\n", |
| card->txbd_ring_size); |
| card->txbd_ring_vbase = pci_alloc_consistent(card->dev, |
| card->txbd_ring_size, |
| &card->txbd_ring_pbase); |
| if (!card->txbd_ring_vbase) { |
| mwifiex_dbg(adapter, ERROR, |
| "allocate consistent memory (%d bytes) failed!\n", |
| card->txbd_ring_size); |
| return -ENOMEM; |
| } |
| mwifiex_dbg(adapter, DATA, |
| "info: txbd_ring - base: %p, pbase: %#x:%x, len: %x\n", |
| card->txbd_ring_vbase, (unsigned int)card->txbd_ring_pbase, |
| (u32)((u64)card->txbd_ring_pbase >> 32), |
| card->txbd_ring_size); |
| |
| return mwifiex_init_txq_ring(adapter); |
| } |
| |
| static int mwifiex_pcie_delete_txbd_ring(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| |
| mwifiex_cleanup_txq_ring(adapter); |
| |
| if (card->txbd_ring_vbase) |
| pci_free_consistent(card->dev, card->txbd_ring_size, |
| card->txbd_ring_vbase, |
| card->txbd_ring_pbase); |
| card->txbd_ring_size = 0; |
| card->txbd_wrptr = 0; |
| card->txbd_rdptr = 0 | reg->tx_rollover_ind; |
| card->txbd_ring_vbase = NULL; |
| card->txbd_ring_pbase = 0; |
| |
| return 0; |
| } |
| |
| /* |
| * This function creates buffer descriptor ring for RX |
| */ |
| static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| |
| /* |
| * driver maintaines the read pointer and firmware maintaines the write |
| * pointer. The write pointer starts at 0 (zero) while the read pointer |
| * starts at zero with rollover bit set |
| */ |
| card->rxbd_wrptr = 0; |
| card->rxbd_rdptr = reg->rx_rollover_ind; |
| |
| if (reg->pfu_enabled) |
| card->rxbd_ring_size = sizeof(struct mwifiex_pfu_buf_desc) * |
| MWIFIEX_MAX_TXRX_BD; |
| else |
| card->rxbd_ring_size = sizeof(struct mwifiex_pcie_buf_desc) * |
| MWIFIEX_MAX_TXRX_BD; |
| |
| mwifiex_dbg(adapter, INFO, |
| "info: rxbd_ring: Allocating %d bytes\n", |
| card->rxbd_ring_size); |
| card->rxbd_ring_vbase = pci_alloc_consistent(card->dev, |
| card->rxbd_ring_size, |
| &card->rxbd_ring_pbase); |
| if (!card->rxbd_ring_vbase) { |
| mwifiex_dbg(adapter, ERROR, |
| "allocate consistent memory (%d bytes) failed!\n", |
| card->rxbd_ring_size); |
| return -ENOMEM; |
| } |
| |
| mwifiex_dbg(adapter, DATA, |
| "info: rxbd_ring - base: %p, pbase: %#x:%x, len: %#x\n", |
| card->rxbd_ring_vbase, (u32)card->rxbd_ring_pbase, |
| (u32)((u64)card->rxbd_ring_pbase >> 32), |
| card->rxbd_ring_size); |
| |
| return mwifiex_init_rxq_ring(adapter); |
| } |
| |
| /* |
| * This function deletes Buffer descriptor ring for RX |
| */ |
| static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| |
| mwifiex_cleanup_rxq_ring(adapter); |
| |
| if (card->rxbd_ring_vbase) |
| pci_free_consistent(card->dev, card->rxbd_ring_size, |
| card->rxbd_ring_vbase, |
| card->rxbd_ring_pbase); |
| card->rxbd_ring_size = 0; |
| card->rxbd_wrptr = 0; |
| card->rxbd_rdptr = 0 | reg->rx_rollover_ind; |
| card->rxbd_ring_vbase = NULL; |
| card->rxbd_ring_pbase = 0; |
| |
| return 0; |
| } |
| |
| /* |
| * This function creates buffer descriptor ring for Events |
| */ |
| static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| |
| /* |
| * driver maintaines the read pointer and firmware maintaines the write |
| * pointer. The write pointer starts at 0 (zero) while the read pointer |
| * starts at zero with rollover bit set |
| */ |
| card->evtbd_wrptr = 0; |
| card->evtbd_rdptr = reg->evt_rollover_ind; |
| |
| card->evtbd_ring_size = sizeof(struct mwifiex_evt_buf_desc) * |
| MWIFIEX_MAX_EVT_BD; |
| |
| mwifiex_dbg(adapter, INFO, |
| "info: evtbd_ring: Allocating %d bytes\n", |
| card->evtbd_ring_size); |
| card->evtbd_ring_vbase = pci_alloc_consistent(card->dev, |
| card->evtbd_ring_size, |
| &card->evtbd_ring_pbase); |
| if (!card->evtbd_ring_vbase) { |
| mwifiex_dbg(adapter, ERROR, |
| "allocate consistent memory (%d bytes) failed!\n", |
| card->evtbd_ring_size); |
| return -ENOMEM; |
| } |
| |
| mwifiex_dbg(adapter, EVENT, |
| "info: CMDRSP/EVT bd_ring - base: %p pbase: %#x:%x len: %#x\n", |
| card->evtbd_ring_vbase, (u32)card->evtbd_ring_pbase, |
| (u32)((u64)card->evtbd_ring_pbase >> 32), |
| card->evtbd_ring_size); |
| |
| return mwifiex_pcie_init_evt_ring(adapter); |
| } |
| |
| /* |
| * This function deletes Buffer descriptor ring for Events |
| */ |
| static int mwifiex_pcie_delete_evtbd_ring(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| |
| mwifiex_cleanup_evt_ring(adapter); |
| |
| if (card->evtbd_ring_vbase) |
| pci_free_consistent(card->dev, card->evtbd_ring_size, |
| card->evtbd_ring_vbase, |
| card->evtbd_ring_pbase); |
| card->evtbd_wrptr = 0; |
| card->evtbd_rdptr = 0 | reg->evt_rollover_ind; |
| card->evtbd_ring_size = 0; |
| card->evtbd_ring_vbase = NULL; |
| card->evtbd_ring_pbase = 0; |
| |
| return 0; |
| } |
| |
| /* |
| * This function allocates a buffer for CMDRSP |
| */ |
| static int mwifiex_pcie_alloc_cmdrsp_buf(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| struct sk_buff *skb; |
| |
| /* Allocate memory for receiving command response data */ |
| skb = dev_alloc_skb(MWIFIEX_UPLD_SIZE); |
| if (!skb) { |
| mwifiex_dbg(adapter, ERROR, |
| "Unable to allocate skb for command response data.\n"); |
| return -ENOMEM; |
| } |
| skb_put(skb, MWIFIEX_UPLD_SIZE); |
| if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE, |
| PCI_DMA_FROMDEVICE)) |
| return -1; |
| |
| card->cmdrsp_buf = skb; |
| |
| return 0; |
| } |
| |
| /* |
| * This function deletes a buffer for CMDRSP |
| */ |
| static int mwifiex_pcie_delete_cmdrsp_buf(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card; |
| |
| if (!adapter) |
| return 0; |
| |
| card = adapter->card; |
| |
| if (card && card->cmdrsp_buf) { |
| mwifiex_unmap_pci_memory(adapter, card->cmdrsp_buf, |
| PCI_DMA_FROMDEVICE); |
| dev_kfree_skb_any(card->cmdrsp_buf); |
| card->cmdrsp_buf = NULL; |
| } |
| |
| if (card && card->cmd_buf) { |
| mwifiex_unmap_pci_memory(adapter, card->cmd_buf, |
| PCI_DMA_TODEVICE); |
| dev_kfree_skb_any(card->cmd_buf); |
| card->cmd_buf = NULL; |
| } |
| return 0; |
| } |
| |
| /* |
| * This function allocates a buffer for sleep cookie |
| */ |
| static int mwifiex_pcie_alloc_sleep_cookie_buf(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| u32 tmp; |
| |
| card->sleep_cookie_vbase = pci_alloc_consistent(card->dev, sizeof(u32), |
| &card->sleep_cookie_pbase); |
| if (!card->sleep_cookie_vbase) { |
| mwifiex_dbg(adapter, ERROR, |
| "pci_alloc_consistent failed!\n"); |
| return -ENOMEM; |
| } |
| /* Init val of Sleep Cookie */ |
| tmp = FW_AWAKE_COOKIE; |
| put_unaligned(tmp, card->sleep_cookie_vbase); |
| |
| mwifiex_dbg(adapter, INFO, |
| "alloc_scook: sleep cookie=0x%x\n", |
| get_unaligned(card->sleep_cookie_vbase)); |
| |
| return 0; |
| } |
| |
| /* |
| * This function deletes buffer for sleep cookie |
| */ |
| static int mwifiex_pcie_delete_sleep_cookie_buf(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card; |
| |
| if (!adapter) |
| return 0; |
| |
| card = adapter->card; |
| |
| if (card && card->sleep_cookie_vbase) { |
| pci_free_consistent(card->dev, sizeof(u32), |
| card->sleep_cookie_vbase, |
| card->sleep_cookie_pbase); |
| card->sleep_cookie_vbase = NULL; |
| } |
| |
| return 0; |
| } |
| |
| /* This function flushes the TX buffer descriptor ring |
| * This function defined as handler is also called while cleaning TXRX |
| * during disconnect/ bss stop. |
| */ |
| static int mwifiex_clean_pcie_ring_buf(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| |
| if (!mwifiex_pcie_txbd_empty(card, card->txbd_rdptr)) { |
| card->txbd_flush = 1; |
| /* write pointer already set at last send |
| * send dnld-rdy intr again, wait for completion. |
| */ |
| if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT, |
| CPU_INTR_DNLD_RDY)) { |
| mwifiex_dbg(adapter, ERROR, |
| "failed to assert dnld-rdy interrupt.\n"); |
| return -1; |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * This function unmaps and frees downloaded data buffer |
| */ |
| static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) |
| { |
| struct sk_buff *skb; |
| u32 wrdoneidx, rdptr, num_tx_buffs, unmap_count = 0; |
| struct mwifiex_pcie_buf_desc *desc; |
| struct mwifiex_pfu_buf_desc *desc2; |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| |
| if (!mwifiex_pcie_ok_to_access_hw(adapter)) |
| mwifiex_pm_wakeup_card(adapter); |
| |
| /* Read the TX ring read pointer set by firmware */ |
| if (mwifiex_read_reg(adapter, reg->tx_rdptr, &rdptr)) { |
| mwifiex_dbg(adapter, ERROR, |
| "SEND COMP: failed to read reg->tx_rdptr\n"); |
| return -1; |
| } |
| |
| mwifiex_dbg(adapter, DATA, |
| "SEND COMP: rdptr_prev=0x%x, rdptr=0x%x\n", |
| card->txbd_rdptr, rdptr); |
| |
| num_tx_buffs = MWIFIEX_MAX_TXRX_BD << reg->tx_start_ptr; |
| /* free from previous txbd_rdptr to current txbd_rdptr */ |
| while (((card->txbd_rdptr & reg->tx_mask) != |
| (rdptr & reg->tx_mask)) || |
| ((card->txbd_rdptr & reg->tx_rollover_ind) != |
| (rdptr & reg->tx_rollover_ind))) { |
| wrdoneidx = (card->txbd_rdptr & reg->tx_mask) >> |
| reg->tx_start_ptr; |
| |
| skb = card->tx_buf_list[wrdoneidx]; |
| |
| if (skb) { |
| mwifiex_dbg(adapter, DATA, |
| "SEND COMP: Detach skb %p at txbd_rdidx=%d\n", |
| skb, wrdoneidx); |
| mwifiex_unmap_pci_memory(adapter, skb, |
| PCI_DMA_TODEVICE); |
| |
| unmap_count++; |
| |
| if (card->txbd_flush) |
| mwifiex_write_data_complete(adapter, skb, 0, |
| -1); |
| else |
| mwifiex_write_data_complete(adapter, skb, 0, 0); |
| atomic_dec(&adapter->tx_hw_pending); |
| } |
| |
| card->tx_buf_list[wrdoneidx] = NULL; |
| |
| if (reg->pfu_enabled) { |
| desc2 = card->txbd_ring[wrdoneidx]; |
| memset(desc2, 0, sizeof(*desc2)); |
| } else { |
| desc = card->txbd_ring[wrdoneidx]; |
| memset(desc, 0, sizeof(*desc)); |
| } |
| switch (card->dev->device) { |
| case PCIE_DEVICE_ID_MARVELL_88W8766P: |
| card->txbd_rdptr++; |
| break; |
| case PCIE_DEVICE_ID_MARVELL_88W8897: |
| case PCIE_DEVICE_ID_MARVELL_88W8997: |
| card->txbd_rdptr += reg->ring_tx_start_ptr; |
| break; |
| } |
| |
| |
| if ((card->txbd_rdptr & reg->tx_mask) == num_tx_buffs) |
| card->txbd_rdptr = ((card->txbd_rdptr & |
| reg->tx_rollover_ind) ^ |
| reg->tx_rollover_ind); |
| } |
| |
| if (unmap_count) |
| adapter->data_sent = false; |
| |
| if (card->txbd_flush) { |
| if (mwifiex_pcie_txbd_empty(card, card->txbd_rdptr)) |
| card->txbd_flush = 0; |
| else |
| mwifiex_clean_pcie_ring_buf(adapter); |
| } |
| |
| return 0; |
| } |
| |
| /* This function sends data buffer to device. First 4 bytes of payload |
| * are filled with payload length and payload type. Then this payload |
| * is mapped to PCI device memory. Tx ring pointers are advanced accordingly. |
| * Download ready interrupt to FW is deffered if Tx ring is not full and |
| * additional payload can be accomodated. |
| * Caller must ensure tx_param parameter to this function is not NULL. |
| */ |
| static int |
| mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, |
| struct mwifiex_tx_param *tx_param) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| u32 wrindx, num_tx_buffs, rx_val; |
| int ret; |
| dma_addr_t buf_pa; |
| struct mwifiex_pcie_buf_desc *desc = NULL; |
| struct mwifiex_pfu_buf_desc *desc2 = NULL; |
| |
| if (!(skb->data && skb->len)) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s(): invalid parameter <%p, %#x>\n", |
| __func__, skb->data, skb->len); |
| return -1; |
| } |
| |
| if (!mwifiex_pcie_ok_to_access_hw(adapter)) |
| mwifiex_pm_wakeup_card(adapter); |
| |
| num_tx_buffs = MWIFIEX_MAX_TXRX_BD << reg->tx_start_ptr; |
| mwifiex_dbg(adapter, DATA, |
| "info: SEND DATA: <Rd: %#x, Wr: %#x>\n", |
| card->txbd_rdptr, card->txbd_wrptr); |
| if (mwifiex_pcie_txbd_not_full(card)) { |
| u8 *payload; |
| |
| adapter->data_sent = true; |
| payload = skb->data; |
| put_unaligned_le16((u16)skb->len, payload + 0); |
| put_unaligned_le16(MWIFIEX_TYPE_DATA, payload + 2); |
| |
| if (mwifiex_map_pci_memory(adapter, skb, skb->len, |
| PCI_DMA_TODEVICE)) |
| return -1; |
| |
| wrindx = (card->txbd_wrptr & reg->tx_mask) >> reg->tx_start_ptr; |
| buf_pa = MWIFIEX_SKB_DMA_ADDR(skb); |
| card->tx_buf_list[wrindx] = skb; |
| atomic_inc(&adapter->tx_hw_pending); |
| |
| if (reg->pfu_enabled) { |
| desc2 = card->txbd_ring[wrindx]; |
| desc2->paddr = buf_pa; |
| desc2->len = (u16)skb->len; |
| desc2->frag_len = (u16)skb->len; |
| desc2->offset = 0; |
| desc2->flags = MWIFIEX_BD_FLAG_FIRST_DESC | |
| MWIFIEX_BD_FLAG_LAST_DESC; |
| } else { |
| desc = card->txbd_ring[wrindx]; |
| desc->paddr = buf_pa; |
| desc->len = (u16)skb->len; |
| desc->flags = MWIFIEX_BD_FLAG_FIRST_DESC | |
| MWIFIEX_BD_FLAG_LAST_DESC; |
| } |
| |
| switch (card->dev->device) { |
| case PCIE_DEVICE_ID_MARVELL_88W8766P: |
| card->txbd_wrptr++; |
| break; |
| case PCIE_DEVICE_ID_MARVELL_88W8897: |
| case PCIE_DEVICE_ID_MARVELL_88W8997: |
| card->txbd_wrptr += reg->ring_tx_start_ptr; |
| break; |
| } |
| |
| if ((card->txbd_wrptr & reg->tx_mask) == num_tx_buffs) |
| card->txbd_wrptr = ((card->txbd_wrptr & |
| reg->tx_rollover_ind) ^ |
| reg->tx_rollover_ind); |
| |
| rx_val = card->rxbd_rdptr & reg->rx_wrap_mask; |
| /* Write the TX ring write pointer in to reg->tx_wrptr */ |
| if (mwifiex_write_reg(adapter, reg->tx_wrptr, |
| card->txbd_wrptr | rx_val)) { |
| mwifiex_dbg(adapter, ERROR, |
| "SEND DATA: failed to write reg->tx_wrptr\n"); |
| ret = -1; |
| goto done_unmap; |
| } |
| if ((mwifiex_pcie_txbd_not_full(card)) && |
| tx_param->next_pkt_len) { |
| /* have more packets and TxBD still can hold more */ |
| mwifiex_dbg(adapter, DATA, |
| "SEND DATA: delay dnld-rdy interrupt.\n"); |
| adapter->data_sent = false; |
| } else { |
| /* Send the TX ready interrupt */ |
| if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT, |
| CPU_INTR_DNLD_RDY)) { |
| mwifiex_dbg(adapter, ERROR, |
| "SEND DATA: failed to assert dnld-rdy interrupt.\n"); |
| ret = -1; |
| goto done_unmap; |
| } |
| } |
| mwifiex_dbg(adapter, DATA, |
| "info: SEND DATA: Updated <Rd: %#x, Wr:\t" |
| "%#x> and sent packet to firmware successfully\n", |
| card->txbd_rdptr, card->txbd_wrptr); |
| } else { |
| mwifiex_dbg(adapter, DATA, |
| "info: TX Ring full, can't send packets to fw\n"); |
| adapter->data_sent = true; |
| /* Send the TX ready interrupt */ |
| if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT, |
| CPU_INTR_DNLD_RDY)) |
| mwifiex_dbg(adapter, ERROR, |
| "SEND DATA: failed to assert door-bell intr\n"); |
| return -EBUSY; |
| } |
| |
| return -EINPROGRESS; |
| done_unmap: |
| mwifiex_unmap_pci_memory(adapter, skb, PCI_DMA_TODEVICE); |
| card->tx_buf_list[wrindx] = NULL; |
| atomic_dec(&adapter->tx_hw_pending); |
| if (reg->pfu_enabled) |
| memset(desc2, 0, sizeof(*desc2)); |
| else |
| memset(desc, 0, sizeof(*desc)); |
| |
| return ret; |
| } |
| |
| /* |
| * This function handles received buffer ring and |
| * dispatches packets to upper |
| */ |
| static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| u32 wrptr, rd_index, tx_val; |
| dma_addr_t buf_pa; |
| int ret = 0; |
| struct sk_buff *skb_tmp = NULL; |
| struct mwifiex_pcie_buf_desc *desc; |
| struct mwifiex_pfu_buf_desc *desc2; |
| |
| if (!mwifiex_pcie_ok_to_access_hw(adapter)) |
| mwifiex_pm_wakeup_card(adapter); |
| |
| /* Read the RX ring Write pointer set by firmware */ |
| if (mwifiex_read_reg(adapter, reg->rx_wrptr, &wrptr)) { |
| mwifiex_dbg(adapter, ERROR, |
| "RECV DATA: failed to read reg->rx_wrptr\n"); |
| ret = -1; |
| goto done; |
| } |
| card->rxbd_wrptr = wrptr; |
| |
| while (((wrptr & reg->rx_mask) != |
| (card->rxbd_rdptr & reg->rx_mask)) || |
| ((wrptr & reg->rx_rollover_ind) == |
| (card->rxbd_rdptr & reg->rx_rollover_ind))) { |
| struct sk_buff *skb_data; |
| u16 rx_len; |
| |
| rd_index = card->rxbd_rdptr & reg->rx_mask; |
| skb_data = card->rx_buf_list[rd_index]; |
| |
| /* If skb allocation was failed earlier for Rx packet, |
| * rx_buf_list[rd_index] would have been left with a NULL. |
| */ |
| if (!skb_data) |
| return -ENOMEM; |
| |
| mwifiex_unmap_pci_memory(adapter, skb_data, PCI_DMA_FROMDEVICE); |
| card->rx_buf_list[rd_index] = NULL; |
| |
| /* Get data length from interface header - |
| * first 2 bytes for len, next 2 bytes is for type |
| */ |
| rx_len = get_unaligned_le16(skb_data->data); |
| if (WARN_ON(rx_len <= adapter->intf_hdr_len || |
| rx_len > MWIFIEX_RX_DATA_BUF_SIZE)) { |
| mwifiex_dbg(adapter, ERROR, |
| "Invalid RX len %d, Rd=%#x, Wr=%#x\n", |
| rx_len, card->rxbd_rdptr, wrptr); |
| dev_kfree_skb_any(skb_data); |
| } else { |
| skb_put(skb_data, rx_len); |
| mwifiex_dbg(adapter, DATA, |
| "info: RECV DATA: Rd=%#x, Wr=%#x, Len=%d\n", |
| card->rxbd_rdptr, wrptr, rx_len); |
| skb_pull(skb_data, adapter->intf_hdr_len); |
| if (adapter->rx_work_enabled) { |
| skb_queue_tail(&adapter->rx_data_q, skb_data); |
| adapter->data_received = true; |
| atomic_inc(&adapter->rx_pending); |
| } else { |
| mwifiex_handle_rx_packet(adapter, skb_data); |
| } |
| } |
| |
| skb_tmp = mwifiex_alloc_dma_align_buf(MWIFIEX_RX_DATA_BUF_SIZE, |
| GFP_KERNEL); |
| if (!skb_tmp) { |
| mwifiex_dbg(adapter, ERROR, |
| "Unable to allocate skb.\n"); |
| return -ENOMEM; |
| } |
| |
| if (mwifiex_map_pci_memory(adapter, skb_tmp, |
| MWIFIEX_RX_DATA_BUF_SIZE, |
| PCI_DMA_FROMDEVICE)) |
| return -1; |
| |
| buf_pa = MWIFIEX_SKB_DMA_ADDR(skb_tmp); |
| |
| mwifiex_dbg(adapter, INFO, |
| "RECV DATA: Attach new sk_buff %p at rxbd_rdidx=%d\n", |
| skb_tmp, rd_index); |
| card->rx_buf_list[rd_index] = skb_tmp; |
| |
| if (reg->pfu_enabled) { |
| desc2 = card->rxbd_ring[rd_index]; |
| desc2->paddr = buf_pa; |
| desc2->len = skb_tmp->len; |
| desc2->frag_len = skb_tmp->len; |
| desc2->offset = 0; |
| desc2->flags = reg->ring_flag_sop | reg->ring_flag_eop; |
| } else { |
| desc = card->rxbd_ring[rd_index]; |
| desc->paddr = buf_pa; |
| desc->len = skb_tmp->len; |
| desc->flags = 0; |
| } |
| |
| if ((++card->rxbd_rdptr & reg->rx_mask) == |
| MWIFIEX_MAX_TXRX_BD) { |
| card->rxbd_rdptr = ((card->rxbd_rdptr & |
| reg->rx_rollover_ind) ^ |
| reg->rx_rollover_ind); |
| } |
| mwifiex_dbg(adapter, DATA, |
| "info: RECV DATA: <Rd: %#x, Wr: %#x>\n", |
| card->rxbd_rdptr, wrptr); |
| |
| tx_val = card->txbd_wrptr & reg->tx_wrap_mask; |
| /* Write the RX ring read pointer in to reg->rx_rdptr */ |
| if (mwifiex_write_reg(adapter, reg->rx_rdptr, |
| card->rxbd_rdptr | tx_val)) { |
| mwifiex_dbg(adapter, DATA, |
| "RECV DATA: failed to write reg->rx_rdptr\n"); |
| ret = -1; |
| goto done; |
| } |
| |
| /* Read the RX ring Write pointer set by firmware */ |
| if (mwifiex_read_reg(adapter, reg->rx_wrptr, &wrptr)) { |
| mwifiex_dbg(adapter, ERROR, |
| "RECV DATA: failed to read reg->rx_wrptr\n"); |
| ret = -1; |
| goto done; |
| } |
| mwifiex_dbg(adapter, DATA, |
| "info: RECV DATA: Rcvd packet from fw successfully\n"); |
| card->rxbd_wrptr = wrptr; |
| } |
| |
| done: |
| return ret; |
| } |
| |
| /* |
| * This function downloads the boot command to device |
| */ |
| static int |
| mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) |
| { |
| dma_addr_t buf_pa; |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| |
| if (!(skb->data && skb->len)) { |
| mwifiex_dbg(adapter, ERROR, |
| "Invalid parameter in %s <%p. len %d>\n", |
| __func__, skb->data, skb->len); |
| return -1; |
| } |
| |
| if (mwifiex_map_pci_memory(adapter, skb, skb->len, PCI_DMA_TODEVICE)) |
| return -1; |
| |
| buf_pa = MWIFIEX_SKB_DMA_ADDR(skb); |
| |
| /* Write the lower 32bits of the physical address to low command |
| * address scratch register |
| */ |
| if (mwifiex_write_reg(adapter, reg->cmd_addr_lo, (u32)buf_pa)) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s: failed to write download command to boot code.\n", |
| __func__); |
| mwifiex_unmap_pci_memory(adapter, skb, PCI_DMA_TODEVICE); |
| return -1; |
| } |
| |
| /* Write the upper 32bits of the physical address to high command |
| * address scratch register |
| */ |
| if (mwifiex_write_reg(adapter, reg->cmd_addr_hi, |
| (u32)((u64)buf_pa >> 32))) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s: failed to write download command to boot code.\n", |
| __func__); |
| mwifiex_unmap_pci_memory(adapter, skb, PCI_DMA_TODEVICE); |
| return -1; |
| } |
| |
| /* Write the command length to cmd_size scratch register */ |
| if (mwifiex_write_reg(adapter, reg->cmd_size, skb->len)) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s: failed to write command len to cmd_size scratch reg\n", |
| __func__); |
| mwifiex_unmap_pci_memory(adapter, skb, PCI_DMA_TODEVICE); |
| return -1; |
| } |
| |
| /* Ring the door bell */ |
| if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT, |
| CPU_INTR_DOOR_BELL)) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s: failed to assert door-bell intr\n", __func__); |
| mwifiex_unmap_pci_memory(adapter, skb, PCI_DMA_TODEVICE); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* This function init rx port in firmware which in turn enables to receive data |
| * from device before transmitting any packet. |
| */ |
| static int mwifiex_pcie_init_fw_port(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| int tx_wrap = card->txbd_wrptr & reg->tx_wrap_mask; |
| |
| /* Write the RX ring read pointer in to reg->rx_rdptr */ |
| if (mwifiex_write_reg(adapter, reg->rx_rdptr, card->rxbd_rdptr | |
| tx_wrap)) { |
| mwifiex_dbg(adapter, ERROR, |
| "RECV DATA: failed to write reg->rx_rdptr\n"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| /* This function downloads commands to the device |
| */ |
| static int |
| mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| int ret = 0; |
| dma_addr_t cmd_buf_pa, cmdrsp_buf_pa; |
| u8 *payload = (u8 *)skb->data; |
| |
| if (!(skb->data && skb->len)) { |
| mwifiex_dbg(adapter, ERROR, |
| "Invalid parameter in %s <%p, %#x>\n", |
| __func__, skb->data, skb->len); |
| return -1; |
| } |
| |
| /* Make sure a command response buffer is available */ |
| if (!card->cmdrsp_buf) { |
| mwifiex_dbg(adapter, ERROR, |
| "No response buffer available, send command failed\n"); |
| return -EBUSY; |
| } |
| |
| if (!mwifiex_pcie_ok_to_access_hw(adapter)) |
| mwifiex_pm_wakeup_card(adapter); |
| |
| adapter->cmd_sent = true; |
| |
| put_unaligned_le16((u16)skb->len, &payload[0]); |
| put_unaligned_le16(MWIFIEX_TYPE_CMD, &payload[2]); |
| |
| if (mwifiex_map_pci_memory(adapter, skb, skb->len, PCI_DMA_TODEVICE)) |
| return -1; |
| |
| card->cmd_buf = skb; |
| /* |
| * Need to keep a reference, since core driver might free up this |
| * buffer before we've unmapped it. |
| */ |
| skb_get(skb); |
| |
| /* To send a command, the driver will: |
| 1. Write the 64bit physical address of the data buffer to |
| cmd response address low + cmd response address high |
| 2. Ring the door bell (i.e. set the door bell interrupt) |
| |
| In response to door bell interrupt, the firmware will perform |
| the DMA of the command packet (first header to obtain the total |
| length and then rest of the command). |
| */ |
| |
| if (card->cmdrsp_buf) { |
| cmdrsp_buf_pa = MWIFIEX_SKB_DMA_ADDR(card->cmdrsp_buf); |
| /* Write the lower 32bits of the cmdrsp buffer physical |
| address */ |
| if (mwifiex_write_reg(adapter, reg->cmdrsp_addr_lo, |
| (u32)cmdrsp_buf_pa)) { |
| mwifiex_dbg(adapter, ERROR, |
| "Failed to write download cmd to boot code.\n"); |
| ret = -1; |
| goto done; |
| } |
| /* Write the upper 32bits of the cmdrsp buffer physical |
| address */ |
| if (mwifiex_write_reg(adapter, reg->cmdrsp_addr_hi, |
| (u32)((u64)cmdrsp_buf_pa >> 32))) { |
| mwifiex_dbg(adapter, ERROR, |
| "Failed to write download cmd to boot code.\n"); |
| ret = -1; |
| goto done; |
| } |
| } |
| |
| cmd_buf_pa = MWIFIEX_SKB_DMA_ADDR(card->cmd_buf); |
| /* Write the lower 32bits of the physical address to reg->cmd_addr_lo */ |
| if (mwifiex_write_reg(adapter, reg->cmd_addr_lo, |
| (u32)cmd_buf_pa)) { |
| mwifiex_dbg(adapter, ERROR, |
| "Failed to write download cmd to boot code.\n"); |
| ret = -1; |
| goto done; |
| } |
| /* Write the upper 32bits of the physical address to reg->cmd_addr_hi */ |
| if (mwifiex_write_reg(adapter, reg->cmd_addr_hi, |
| (u32)((u64)cmd_buf_pa >> 32))) { |
| mwifiex_dbg(adapter, ERROR, |
| "Failed to write download cmd to boot code.\n"); |
| ret = -1; |
| goto done; |
| } |
| |
| /* Write the command length to reg->cmd_size */ |
| if (mwifiex_write_reg(adapter, reg->cmd_size, |
| card->cmd_buf->len)) { |
| mwifiex_dbg(adapter, ERROR, |
| "Failed to write cmd len to reg->cmd_size\n"); |
| ret = -1; |
| goto done; |
| } |
| |
| /* Ring the door bell */ |
| if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT, |
| CPU_INTR_DOOR_BELL)) { |
| mwifiex_dbg(adapter, ERROR, |
| "Failed to assert door-bell intr\n"); |
| ret = -1; |
| goto done; |
| } |
| |
| done: |
| if (ret) |
| adapter->cmd_sent = false; |
| |
| return 0; |
| } |
| |
| /* |
| * This function handles command complete interrupt |
| */ |
| static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| struct sk_buff *skb = card->cmdrsp_buf; |
| int count = 0; |
| u16 rx_len; |
| |
| mwifiex_dbg(adapter, CMD, |
| "info: Rx CMD Response\n"); |
| |
| if (adapter->curr_cmd) |
| mwifiex_unmap_pci_memory(adapter, skb, PCI_DMA_FROMDEVICE); |
| else |
| pci_dma_sync_single_for_cpu(card->dev, |
| MWIFIEX_SKB_DMA_ADDR(skb), |
| MWIFIEX_UPLD_SIZE, |
| PCI_DMA_FROMDEVICE); |
| |
| /* Unmap the command as a response has been received. */ |
| if (card->cmd_buf) { |
| mwifiex_unmap_pci_memory(adapter, card->cmd_buf, |
| PCI_DMA_TODEVICE); |
| dev_kfree_skb_any(card->cmd_buf); |
| card->cmd_buf = NULL; |
| } |
| |
| rx_len = get_unaligned_le16(skb->data); |
| skb_put(skb, MWIFIEX_UPLD_SIZE - skb->len); |
| skb_trim(skb, rx_len); |
| |
| if (!adapter->curr_cmd) { |
| if (adapter->ps_state == PS_STATE_SLEEP_CFM) { |
| pci_dma_sync_single_for_device(card->dev, |
| MWIFIEX_SKB_DMA_ADDR(skb), |
| MWIFIEX_SLEEP_COOKIE_SIZE, |
| PCI_DMA_FROMDEVICE); |
| if (mwifiex_write_reg(adapter, |
| PCIE_CPU_INT_EVENT, |
| CPU_INTR_SLEEP_CFM_DONE)) { |
| mwifiex_dbg(adapter, ERROR, |
| "Write register failed\n"); |
| return -1; |
| } |
| mwifiex_delay_for_sleep_cookie(adapter, |
| MWIFIEX_MAX_DELAY_COUNT); |
| mwifiex_unmap_pci_memory(adapter, skb, |
| PCI_DMA_FROMDEVICE); |
| skb_pull(skb, adapter->intf_hdr_len); |
| while (reg->sleep_cookie && (count++ < 10) && |
| mwifiex_pcie_ok_to_access_hw(adapter)) |
| usleep_range(50, 60); |
| mwifiex_pcie_enable_host_int(adapter); |
| mwifiex_process_sleep_confirm_resp(adapter, skb->data, |
| skb->len); |
| } else { |
| mwifiex_dbg(adapter, ERROR, |
| "There is no command but got cmdrsp\n"); |
| } |
| memcpy(adapter->upld_buf, skb->data, |
| min_t(u32, MWIFIEX_SIZE_OF_CMD_BUFFER, skb->len)); |
| skb_push(skb, adapter->intf_hdr_len); |
| if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE, |
| PCI_DMA_FROMDEVICE)) |
| return -1; |
| } else if (mwifiex_pcie_ok_to_access_hw(adapter)) { |
| skb_pull(skb, adapter->intf_hdr_len); |
| adapter->curr_cmd->resp_skb = skb; |
| adapter->cmd_resp_received = true; |
| /* Take the pointer and set it to CMD node and will |
| return in the response complete callback */ |
| card->cmdrsp_buf = NULL; |
| |
| /* Clear the cmd-rsp buffer address in scratch registers. This |
| will prevent firmware from writing to the same response |
| buffer again. */ |
| if (mwifiex_write_reg(adapter, reg->cmdrsp_addr_lo, 0)) { |
| mwifiex_dbg(adapter, ERROR, |
| "cmd_done: failed to clear cmd_rsp_addr_lo\n"); |
| return -1; |
| } |
| /* Write the upper 32bits of the cmdrsp buffer physical |
| address */ |
| if (mwifiex_write_reg(adapter, reg->cmdrsp_addr_hi, 0)) { |
| mwifiex_dbg(adapter, ERROR, |
| "cmd_done: failed to clear cmd_rsp_addr_hi\n"); |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Command Response processing complete handler |
| */ |
| static int mwifiex_pcie_cmdrsp_complete(struct mwifiex_adapter *adapter, |
| struct sk_buff *skb) |
| { |
| struct pcie_service_card *card = adapter->card; |
| |
| if (skb) { |
| card->cmdrsp_buf = skb; |
| skb_push(card->cmdrsp_buf, adapter->intf_hdr_len); |
| if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE, |
| PCI_DMA_FROMDEVICE)) |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * This function handles firmware event ready interrupt |
| */ |
| static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| u32 rdptr = card->evtbd_rdptr & MWIFIEX_EVTBD_MASK; |
| u32 wrptr, event; |
| struct mwifiex_evt_buf_desc *desc; |
| |
| if (!mwifiex_pcie_ok_to_access_hw(adapter)) |
| mwifiex_pm_wakeup_card(adapter); |
| |
| if (adapter->event_received) { |
| mwifiex_dbg(adapter, EVENT, |
| "info: Event being processed,\t" |
| "do not process this interrupt just yet\n"); |
| return 0; |
| } |
| |
| if (rdptr >= MWIFIEX_MAX_EVT_BD) { |
| mwifiex_dbg(adapter, ERROR, |
| "info: Invalid read pointer...\n"); |
| return -1; |
| } |
| |
| /* Read the event ring write pointer set by firmware */ |
| if (mwifiex_read_reg(adapter, reg->evt_wrptr, &wrptr)) { |
| mwifiex_dbg(adapter, ERROR, |
| "EventReady: failed to read reg->evt_wrptr\n"); |
| return -1; |
| } |
| |
| mwifiex_dbg(adapter, EVENT, |
| "info: EventReady: Initial <Rd: 0x%x, Wr: 0x%x>", |
| card->evtbd_rdptr, wrptr); |
| if (((wrptr & MWIFIEX_EVTBD_MASK) != (card->evtbd_rdptr |
| & MWIFIEX_EVTBD_MASK)) || |
| ((wrptr & reg->evt_rollover_ind) == |
| (card->evtbd_rdptr & reg->evt_rollover_ind))) { |
| struct sk_buff *skb_cmd; |
| __le16 data_len = 0; |
| u16 evt_len; |
| |
| mwifiex_dbg(adapter, INFO, |
| "info: Read Index: %d\n", rdptr); |
| skb_cmd = card->evt_buf_list[rdptr]; |
| mwifiex_unmap_pci_memory(adapter, skb_cmd, PCI_DMA_FROMDEVICE); |
| |
| /* Take the pointer and set it to event pointer in adapter |
| and will return back after event handling callback */ |
| card->evt_buf_list[rdptr] = NULL; |
| desc = card->evtbd_ring[rdptr]; |
| memset(desc, 0, sizeof(*desc)); |
| |
| event = get_unaligned_le32( |
| &skb_cmd->data[adapter->intf_hdr_len]); |
| adapter->event_cause = event; |
| /* The first 4bytes will be the event transfer header |
| len is 2 bytes followed by type which is 2 bytes */ |
| memcpy(&data_len, skb_cmd->data, sizeof(__le16)); |
| evt_len = le16_to_cpu(data_len); |
| skb_trim(skb_cmd, evt_len); |
| skb_pull(skb_cmd, adapter->intf_hdr_len); |
| mwifiex_dbg(adapter, EVENT, |
| "info: Event length: %d\n", evt_len); |
| |
| if (evt_len > MWIFIEX_EVENT_HEADER_LEN && |
| evt_len < MAX_EVENT_SIZE) |
| memcpy(adapter->event_body, skb_cmd->data + |
| MWIFIEX_EVENT_HEADER_LEN, evt_len - |
| MWIFIEX_EVENT_HEADER_LEN); |
| |
| adapter->event_received = true; |
| adapter->event_skb = skb_cmd; |
| |
| /* Do not update the event read pointer here, wait till the |
| buffer is released. This is just to make things simpler, |
| we need to find a better method of managing these buffers. |
| */ |
| } else { |
| if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT, |
| CPU_INTR_EVENT_DONE)) { |
| mwifiex_dbg(adapter, ERROR, |
| "Write register failed\n"); |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Event processing complete handler |
| */ |
| static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter, |
| struct sk_buff *skb) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| int ret = 0; |
| u32 rdptr = card->evtbd_rdptr & MWIFIEX_EVTBD_MASK; |
| u32 wrptr; |
| struct mwifiex_evt_buf_desc *desc; |
| |
| if (!skb) |
| return 0; |
| |
| if (rdptr >= MWIFIEX_MAX_EVT_BD) { |
| mwifiex_dbg(adapter, ERROR, |
| "event_complete: Invalid rdptr 0x%x\n", |
| rdptr); |
| return -EINVAL; |
| } |
| |
| /* Read the event ring write pointer set by firmware */ |
| if (mwifiex_read_reg(adapter, reg->evt_wrptr, &wrptr)) { |
| mwifiex_dbg(adapter, ERROR, |
| "event_complete: failed to read reg->evt_wrptr\n"); |
| return -1; |
| } |
| |
| if (!card->evt_buf_list[rdptr]) { |
| skb_push(skb, adapter->intf_hdr_len); |
| skb_put(skb, MAX_EVENT_SIZE - skb->len); |
| if (mwifiex_map_pci_memory(adapter, skb, |
| MAX_EVENT_SIZE, |
| PCI_DMA_FROMDEVICE)) |
| return -1; |
| card->evt_buf_list[rdptr] = skb; |
| desc = card->evtbd_ring[rdptr]; |
| desc->paddr = MWIFIEX_SKB_DMA_ADDR(skb); |
| desc->len = (u16)skb->len; |
| desc->flags = 0; |
| skb = NULL; |
| } else { |
| mwifiex_dbg(adapter, ERROR, |
| "info: ERROR: buf still valid at index %d, <%p, %p>\n", |
| rdptr, card->evt_buf_list[rdptr], skb); |
| } |
| |
| if ((++card->evtbd_rdptr & MWIFIEX_EVTBD_MASK) == MWIFIEX_MAX_EVT_BD) { |
| card->evtbd_rdptr = ((card->evtbd_rdptr & |
| reg->evt_rollover_ind) ^ |
| reg->evt_rollover_ind); |
| } |
| |
| mwifiex_dbg(adapter, EVENT, |
| "info: Updated <Rd: 0x%x, Wr: 0x%x>", |
| card->evtbd_rdptr, wrptr); |
| |
| /* Write the event ring read pointer in to reg->evt_rdptr */ |
| if (mwifiex_write_reg(adapter, reg->evt_rdptr, |
| card->evtbd_rdptr)) { |
| mwifiex_dbg(adapter, ERROR, |
| "event_complete: failed to read reg->evt_rdptr\n"); |
| return -1; |
| } |
| |
| mwifiex_dbg(adapter, EVENT, |
| "info: Check Events Again\n"); |
| ret = mwifiex_pcie_process_event_ready(adapter); |
| |
| return ret; |
| } |
| |
| /* Combo firmware image is a combination of |
| * (1) combo crc heaer, start with CMD5 |
| * (2) bluetooth image, start with CMD7, end with CMD6, data wrapped in CMD1. |
| * (3) wifi image. |
| * |
| * This function bypass the header and bluetooth part, return |
| * the offset of tail wifi-only part. If the image is already wifi-only, |
| * that is start with CMD1, return 0. |
| */ |
| |
| static int mwifiex_extract_wifi_fw(struct mwifiex_adapter *adapter, |
| const void *firmware, u32 firmware_len) { |
| const struct mwifiex_fw_data *fwdata; |
| u32 offset = 0, data_len, dnld_cmd; |
| int ret = 0; |
| bool cmd7_before = false, first_cmd = false; |
| |
| while (1) { |
| /* Check for integer and buffer overflow */ |
| if (offset + sizeof(fwdata->header) < sizeof(fwdata->header) || |
| offset + sizeof(fwdata->header) >= firmware_len) { |
| mwifiex_dbg(adapter, ERROR, |
| "extract wifi-only fw failure!\n"); |
| ret = -1; |
| goto done; |
| } |
| |
| fwdata = firmware + offset; |
| dnld_cmd = le32_to_cpu(fwdata->header.dnld_cmd); |
| data_len = le32_to_cpu(fwdata->header.data_length); |
| |
| /* Skip past header */ |
| offset += sizeof(fwdata->header); |
| |
| switch (dnld_cmd) { |
| case MWIFIEX_FW_DNLD_CMD_1: |
| if (offset + data_len < data_len) { |
| mwifiex_dbg(adapter, ERROR, "bad FW parse\n"); |
| ret = -1; |
| goto done; |
| } |
| |
| /* Image start with cmd1, already wifi-only firmware */ |
| if (!first_cmd) { |
| mwifiex_dbg(adapter, MSG, |
| "input wifi-only firmware\n"); |
| return 0; |
| } |
| |
| if (!cmd7_before) { |
| mwifiex_dbg(adapter, ERROR, |
| "no cmd7 before cmd1!\n"); |
| ret = -1; |
| goto done; |
| } |
| offset += data_len; |
| break; |
| case MWIFIEX_FW_DNLD_CMD_5: |
| first_cmd = true; |
| /* Check for integer overflow */ |
| if (offset + data_len < data_len) { |
| mwifiex_dbg(adapter, ERROR, "bad FW parse\n"); |
| ret = -1; |
| goto done; |
| } |
| offset += data_len; |
| break; |
| case MWIFIEX_FW_DNLD_CMD_6: |
| first_cmd = true; |
| /* Check for integer overflow */ |
| if (offset + data_len < data_len) { |
| mwifiex_dbg(adapter, ERROR, "bad FW parse\n"); |
| ret = -1; |
| goto done; |
| } |
| offset += data_len; |
| if (offset >= firmware_len) { |
| mwifiex_dbg(adapter, ERROR, |
| "extract wifi-only fw failure!\n"); |
| ret = -1; |
| } else { |
| ret = offset; |
| } |
| goto done; |
| case MWIFIEX_FW_DNLD_CMD_7: |
| first_cmd = true; |
| cmd7_before = true; |
| break; |
| default: |
| mwifiex_dbg(adapter, ERROR, "unknown dnld_cmd %d\n", |
| dnld_cmd); |
| ret = -1; |
| goto done; |
| } |
| } |
| |
| done: |
| return ret; |
| } |
| |
| /* |
| * This function downloads the firmware to the card. |
| * |
| * Firmware is downloaded to the card in blocks. Every block download |
| * is tested for CRC errors, and retried a number of times before |
| * returning failure. |
| */ |
| static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, |
| struct mwifiex_fw_image *fw) |
| { |
| int ret; |
| u8 *firmware = fw->fw_buf; |
| u32 firmware_len = fw->fw_len; |
| u32 offset = 0; |
| struct sk_buff *skb; |
| u32 txlen, tx_blocks = 0, tries, len, val; |
| u32 block_retry_cnt = 0; |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| |
| if (!firmware || !firmware_len) { |
| mwifiex_dbg(adapter, ERROR, |
| "No firmware image found! Terminating download\n"); |
| return -1; |
| } |
| |
| mwifiex_dbg(adapter, INFO, |
| "info: Downloading FW image (%d bytes)\n", |
| firmware_len); |
| |
| if (mwifiex_pcie_disable_host_int(adapter)) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s: Disabling interrupts failed.\n", __func__); |
| return -1; |
| } |
| |
| skb = dev_alloc_skb(MWIFIEX_UPLD_SIZE); |
| if (!skb) { |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| ret = mwifiex_read_reg(adapter, PCIE_SCRATCH_13_REG, &val); |
| if (ret) { |
| mwifiex_dbg(adapter, FATAL, "Failed to read scratch register 13\n"); |
| goto done; |
| } |
| |
| /* PCIE FLR case: extract wifi part from combo firmware*/ |
| if (val == MWIFIEX_PCIE_FLR_HAPPENS) { |
| ret = mwifiex_extract_wifi_fw(adapter, firmware, firmware_len); |
| if (ret < 0) { |
| mwifiex_dbg(adapter, ERROR, "Failed to extract wifi fw\n"); |
| goto done; |
| } |
| offset = ret; |
| mwifiex_dbg(adapter, MSG, |
| "info: dnld wifi firmware from %d bytes\n", offset); |
| } |
| |
| /* Perform firmware data transfer */ |
| do { |
| u32 ireg_intr = 0; |
| |
| /* More data? */ |
| if (offset >= firmware_len) |
| break; |
| |
| for (tries = 0; tries < MAX_POLL_TRIES; tries++) { |
| ret = mwifiex_read_reg(adapter, reg->cmd_size, |
| &len); |
| if (ret) { |
| mwifiex_dbg(adapter, FATAL, |
| "Failed reading len from boot code\n"); |
| goto done; |
| } |
| if (len) |
| break; |
| usleep_range(10, 20); |
| } |
| |
| if (!len) { |
| break; |
| } else if (len > MWIFIEX_UPLD_SIZE) { |
| mwifiex_dbg(adapter, ERROR, |
| "FW download failure @ %d, invalid length %d\n", |
| offset, len); |
| ret = -1; |
| goto done; |
| } |
| |
| txlen = len; |
| |
| if (len & BIT(0)) { |
| block_retry_cnt++; |
| if (block_retry_cnt > MAX_WRITE_IOMEM_RETRY) { |
| mwifiex_dbg(adapter, ERROR, |
| "FW download failure @ %d, over max\t" |
| "retry count\n", offset); |
| ret = -1; |
| goto done; |
| } |
| mwifiex_dbg(adapter, ERROR, |
| "FW CRC error indicated by the\t" |
| "helper: len = 0x%04X, txlen = %d\n", |
| len, txlen); |
| len &= ~BIT(0); |
| /* Setting this to 0 to resend from same offset */ |
| txlen = 0; |
| } else { |
| block_retry_cnt = 0; |
| /* Set blocksize to transfer - checking for |
| last block */ |
| if (firmware_len - offset < txlen) |
| txlen = firmware_len - offset; |
| |
| tx_blocks = (txlen + card->pcie.blksz_fw_dl - 1) / |
| card->pcie.blksz_fw_dl; |
| |
| /* Copy payload to buffer */ |
| memmove(skb->data, &firmware[offset], txlen); |
| } |
| |
| skb_put(skb, MWIFIEX_UPLD_SIZE - skb->len); |
| skb_trim(skb, tx_blocks * card->pcie.blksz_fw_dl); |
| |
| /* Send the boot command to device */ |
| if (mwifiex_pcie_send_boot_cmd(adapter, skb)) { |
| mwifiex_dbg(adapter, ERROR, |
| "Failed to send firmware download command\n"); |
| ret = -1; |
| goto done; |
| } |
| |
| /* Wait for the command done interrupt */ |
| for (tries = 0; tries < MAX_POLL_TRIES; tries++) { |
| if (mwifiex_read_reg(adapter, PCIE_CPU_INT_STATUS, |
| &ireg_intr)) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s: Failed to read\t" |
| "interrupt status during fw dnld.\n", |
| __func__); |
| mwifiex_unmap_pci_memory(adapter, skb, |
| PCI_DMA_TODEVICE); |
| ret = -1; |
| goto done; |
| } |
| if (!(ireg_intr & CPU_INTR_DOOR_BELL)) |
| break; |
| usleep_range(10, 20); |
| } |
| if (ireg_intr & CPU_INTR_DOOR_BELL) { |
| mwifiex_dbg(adapter, ERROR, "%s: Card failed to ACK download\n", |
| __func__); |
| mwifiex_unmap_pci_memory(adapter, skb, |
| PCI_DMA_TODEVICE); |
| ret = -1; |
| goto done; |
| } |
| |
| mwifiex_unmap_pci_memory(adapter, skb, PCI_DMA_TODEVICE); |
| |
| offset += txlen; |
| } while (true); |
| |
| mwifiex_dbg(adapter, MSG, |
| "info: FW download over, size %d bytes\n", offset); |
| |
| ret = 0; |
| |
| done: |
| dev_kfree_skb_any(skb); |
| return ret; |
| } |
| |
| /* |
| * This function checks the firmware status in card. |
| */ |
| static int |
| mwifiex_check_fw_status(struct mwifiex_adapter *adapter, u32 poll_num) |
| { |
| int ret = 0; |
| u32 firmware_stat; |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| u32 tries; |
| |
| /* Mask spurios interrupts */ |
| if (mwifiex_write_reg(adapter, PCIE_HOST_INT_STATUS_MASK, |
| HOST_INTR_MASK)) { |
| mwifiex_dbg(adapter, ERROR, |
| "Write register failed\n"); |
| return -1; |
| } |
| |
| mwifiex_dbg(adapter, INFO, |
| "Setting driver ready signature\n"); |
| if (mwifiex_write_reg(adapter, reg->drv_rdy, |
| FIRMWARE_READY_PCIE)) { |
| mwifiex_dbg(adapter, ERROR, |
| "Failed to write driver ready signature\n"); |
| return -1; |
| } |
| |
| /* Wait for firmware initialization event */ |
| for (tries = 0; tries < poll_num; tries++) { |
| if (mwifiex_read_reg(adapter, reg->fw_status, |
| &firmware_stat)) |
| ret = -1; |
| else |
| ret = 0; |
| |
| mwifiex_dbg(adapter, INFO, "Try %d if FW is ready <%d,%#x>", |
| tries, ret, firmware_stat); |
| |
| if (ret) |
| continue; |
| if (firmware_stat == FIRMWARE_READY_PCIE) { |
| ret = 0; |
| break; |
| } else { |
| msleep(100); |
| ret = -1; |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* This function checks if WLAN is the winner. |
| */ |
| static int |
| mwifiex_check_winner_status(struct mwifiex_adapter *adapter) |
| { |
| u32 winner = 0; |
| int ret = 0; |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| |
| if (mwifiex_read_reg(adapter, reg->fw_status, &winner)) { |
| ret = -1; |
| } else if (!winner) { |
| mwifiex_dbg(adapter, INFO, "PCI-E is the winner\n"); |
| adapter->winner = 1; |
| } else { |
| mwifiex_dbg(adapter, ERROR, |
| "PCI-E is not the winner <%#x>", winner); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * This function reads the interrupt status from card. |
| */ |
| static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter, |
| int msg_id) |
| { |
| u32 pcie_ireg; |
| unsigned long flags; |
| struct pcie_service_card *card = adapter->card; |
| |
| if (card->msi_enable) { |
| spin_lock_irqsave(&adapter->int_lock, flags); |
| adapter->int_status = 1; |
| spin_unlock_irqrestore(&adapter->int_lock, flags); |
| return; |
| } |
| |
| if (!mwifiex_pcie_ok_to_access_hw(adapter)) |
| return; |
| |
| if (card->msix_enable && msg_id >= 0) { |
| pcie_ireg = BIT(msg_id); |
| } else { |
| if (mwifiex_read_reg(adapter, PCIE_HOST_INT_STATUS, |
| &pcie_ireg)) { |
| mwifiex_dbg(adapter, ERROR, "Read register failed\n"); |
| return; |
| } |
| |
| if ((pcie_ireg == 0xFFFFFFFF) || !pcie_ireg) |
| return; |
| |
| |
| mwifiex_pcie_disable_host_int(adapter); |
| |
| /* Clear the pending interrupts */ |
| if (mwifiex_write_reg(adapter, PCIE_HOST_INT_STATUS, |
| ~pcie_ireg)) { |
| mwifiex_dbg(adapter, ERROR, |
| "Write register failed\n"); |
| return; |
| } |
| } |
| |
| if (!adapter->pps_uapsd_mode && |
| adapter->ps_state == PS_STATE_SLEEP && |
| mwifiex_pcie_ok_to_access_hw(adapter)) { |
| /* Potentially for PCIe we could get other |
| * interrupts like shared. Don't change power |
| * state until cookie is set |
| */ |
| adapter->ps_state = PS_STATE_AWAKE; |
| adapter->pm_wakeup_fw_try = false; |
| del_timer(&adapter->wakeup_timer); |
| } |
| |
| spin_lock_irqsave(&adapter->int_lock, flags); |
| adapter->int_status |= pcie_ireg; |
| spin_unlock_irqrestore(&adapter->int_lock, flags); |
| mwifiex_dbg(adapter, INTR, "ireg: 0x%08x\n", pcie_ireg); |
| } |
| |
| /* |
| * Interrupt handler for PCIe root port |
| * |
| * This function reads the interrupt status from firmware and assigns |
| * the main process in workqueue which will handle the interrupt. |
| */ |
| static irqreturn_t mwifiex_pcie_interrupt(int irq, void *context) |
| { |
| struct mwifiex_msix_context *ctx = context; |
| struct pci_dev *pdev = ctx->dev; |
| struct pcie_service_card *card; |
| struct mwifiex_adapter *adapter; |
| |
| card = pci_get_drvdata(pdev); |
| |
| if (!card->adapter) { |
| pr_err("info: %s: card=%p adapter=%p\n", __func__, card, |
| card ? card->adapter : NULL); |
| goto exit; |
| } |
| adapter = card->adapter; |
| |
| if (test_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags)) |
| goto exit; |
| |
| if (card->msix_enable) |
| mwifiex_interrupt_status(adapter, ctx->msg_id); |
| else |
| mwifiex_interrupt_status(adapter, -1); |
| |
| mwifiex_queue_main_work(adapter); |
| |
| exit: |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * This function checks the current interrupt status. |
| * |
| * The following interrupts are checked and handled by this function - |
| * - Data sent |
| * - Command sent |
| * - Command received |
| * - Packets received |
| * - Events received |
| * |
| * In case of Rx packets received, the packets are uploaded from card to |
| * host and processed accordingly. |
| */ |
| static int mwifiex_process_int_status(struct mwifiex_adapter *adapter) |
| { |
| int ret; |
| u32 pcie_ireg = 0; |
| unsigned long flags; |
| struct pcie_service_card *card = adapter->card; |
| |
| spin_lock_irqsave(&adapter->int_lock, flags); |
| if (!card->msi_enable) { |
| /* Clear out unused interrupts */ |
| pcie_ireg = adapter->int_status; |
| } |
| adapter->int_status = 0; |
| spin_unlock_irqrestore(&adapter->int_lock, flags); |
| |
| if (card->msi_enable) { |
| if (mwifiex_pcie_ok_to_access_hw(adapter)) { |
| if (mwifiex_read_reg(adapter, PCIE_HOST_INT_STATUS, |
| &pcie_ireg)) { |
| mwifiex_dbg(adapter, ERROR, |
| "Read register failed\n"); |
| return -1; |
| } |
| |
| if ((pcie_ireg != 0xFFFFFFFF) && (pcie_ireg)) { |
| if (mwifiex_write_reg(adapter, |
| PCIE_HOST_INT_STATUS, |
| ~pcie_ireg)) { |
| mwifiex_dbg(adapter, ERROR, |
| "Write register failed\n"); |
| return -1; |
| } |
| if (!adapter->pps_uapsd_mode && |
| adapter->ps_state == PS_STATE_SLEEP) { |
| adapter->ps_state = PS_STATE_AWAKE; |
| adapter->pm_wakeup_fw_try = false; |
| del_timer(&adapter->wakeup_timer); |
| } |
| } |
| } |
| } |
| |
| if (pcie_ireg & HOST_INTR_DNLD_DONE) { |
| mwifiex_dbg(adapter, INTR, "info: TX DNLD Done\n"); |
| ret = mwifiex_pcie_send_data_complete(adapter); |
| if (ret) |
| return ret; |
| } |
| if (pcie_ireg & HOST_INTR_UPLD_RDY) { |
| mwifiex_dbg(adapter, INTR, "info: Rx DATA\n"); |
| ret = mwifiex_pcie_process_recv_data(adapter); |
| if (ret) |
| return ret; |
| } |
| if (pcie_ireg & HOST_INTR_EVENT_RDY) { |
| mwifiex_dbg(adapter, INTR, "info: Rx EVENT\n"); |
| ret = mwifiex_pcie_process_event_ready(adapter); |
| if (ret) |
| return ret; |
| } |
| if (pcie_ireg & HOST_INTR_CMD_DONE) { |
| if (adapter->cmd_sent) { |
| mwifiex_dbg(adapter, INTR, |
| "info: CMD sent Interrupt\n"); |
| adapter->cmd_sent = false; |
| } |
| /* Handle command response */ |
| ret = mwifiex_pcie_process_cmd_complete(adapter); |
| if (ret) |
| return ret; |
| } |
| |
| mwifiex_dbg(adapter, INTR, |
| "info: cmd_sent=%d data_sent=%d\n", |
| adapter->cmd_sent, adapter->data_sent); |
| if (!card->msi_enable && !card->msix_enable && |
| adapter->ps_state != PS_STATE_SLEEP) |
| mwifiex_pcie_enable_host_int(adapter); |
| |
| return 0; |
| } |
| |
| /* |
| * This function downloads data from driver to card. |
| * |
| * Both commands and data packets are transferred to the card by this |
| * function. |
| * |
| * This function adds the PCIE specific header to the front of the buffer |
| * before transferring. The header contains the length of the packet and |
| * the type. The firmware handles the packets based upon this set type. |
| */ |
| static int mwifiex_pcie_host_to_card(struct mwifiex_adapter *adapter, u8 type, |
| struct sk_buff *skb, |
| struct mwifiex_tx_param *tx_param) |
| { |
| if (!skb) { |
| mwifiex_dbg(adapter, ERROR, |
| "Passed NULL skb to %s\n", __func__); |
| return -1; |
| } |
| |
| if (type == MWIFIEX_TYPE_DATA) |
| return mwifiex_pcie_send_data(adapter, skb, tx_param); |
| else if (type == MWIFIEX_TYPE_CMD) |
| return mwifiex_pcie_send_cmd(adapter, skb); |
| |
| return 0; |
| } |
| |
| /* Function to dump PCIE scratch registers in case of FW crash |
| */ |
| static int |
| mwifiex_pcie_reg_dump(struct mwifiex_adapter *adapter, char *drv_buf) |
| { |
| char *p = drv_buf; |
| char buf[256], *ptr; |
| int i; |
| u32 value; |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| int pcie_scratch_reg[] = {PCIE_SCRATCH_12_REG, |
| PCIE_SCRATCH_14_REG, |
| PCIE_SCRATCH_15_REG}; |
| |
| if (!p) |
| return 0; |
| |
| mwifiex_dbg(adapter, MSG, "PCIE register dump start\n"); |
| |
| if (mwifiex_read_reg(adapter, reg->fw_status, &value)) { |
| mwifiex_dbg(adapter, ERROR, "failed to read firmware status"); |
| return 0; |
| } |
| |
| ptr = buf; |
| mwifiex_dbg(adapter, MSG, "pcie scratch register:"); |
| for (i = 0; i < ARRAY_SIZE(pcie_scratch_reg); i++) { |
| mwifiex_read_reg(adapter, pcie_scratch_reg[i], &value); |
| ptr += sprintf(ptr, "reg:0x%x, value=0x%x\n", |
| pcie_scratch_reg[i], value); |
| } |
| |
| mwifiex_dbg(adapter, MSG, "%s\n", buf); |
| p += sprintf(p, "%s\n", buf); |
| |
| mwifiex_dbg(adapter, MSG, "PCIE register dump end\n"); |
| |
| return p - drv_buf; |
| } |
| |
| /* This function read/write firmware */ |
| static enum rdwr_status |
| mwifiex_pcie_rdwr_firmware(struct mwifiex_adapter *adapter, u8 doneflag) |
| { |
| int ret, tries; |
| u8 ctrl_data; |
| u32 fw_status; |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| |
| if (mwifiex_read_reg(adapter, reg->fw_status, &fw_status)) |
| return RDWR_STATUS_FAILURE; |
| |
| ret = mwifiex_write_reg(adapter, reg->fw_dump_ctrl, |
| reg->fw_dump_host_ready); |
| if (ret) { |
| mwifiex_dbg(adapter, ERROR, |
| "PCIE write err\n"); |
| return RDWR_STATUS_FAILURE; |
| } |
| |
| for (tries = 0; tries < MAX_POLL_TRIES; tries++) { |
| mwifiex_read_reg_byte(adapter, reg->fw_dump_ctrl, &ctrl_data); |
| if (ctrl_data == FW_DUMP_DONE) |
| return RDWR_STATUS_SUCCESS; |
| if (doneflag && ctrl_data == doneflag) |
| return RDWR_STATUS_DONE; |
| if (ctrl_data != reg->fw_dump_host_ready) { |
| mwifiex_dbg(adapter, WARN, |
| "The ctrl reg was changed, re-try again!\n"); |
| ret = mwifiex_write_reg(adapter, reg->fw_dump_ctrl, |
| reg->fw_dump_host_ready); |
| if (ret) { |
| mwifiex_dbg(adapter, ERROR, |
| "PCIE write err\n"); |
| return RDWR_STATUS_FAILURE; |
| } |
| } |
| usleep_range(100, 200); |
| } |
| |
| mwifiex_dbg(adapter, ERROR, "Fail to pull ctrl_data\n"); |
| return RDWR_STATUS_FAILURE; |
| } |
| |
| /* This function dump firmware memory to file */ |
| static void mwifiex_pcie_fw_dump(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *creg = card->pcie.reg; |
| unsigned int reg, reg_start, reg_end; |
| u8 *dbg_ptr, *end_ptr, *tmp_ptr, fw_dump_num, dump_num; |
| u8 idx, i, read_reg, doneflag = 0; |
| enum rdwr_status stat; |
| u32 memory_size; |
| int ret; |
| |
| if (!card->pcie.can_dump_fw) |
| return; |
| |
| for (idx = 0; idx < adapter->num_mem_types; idx++) { |
| struct memory_type_mapping *entry = |
| &adapter->mem_type_mapping_tbl[idx]; |
| |
| if (entry->mem_ptr) { |
| vfree(entry->mem_ptr); |
| entry->mem_ptr = NULL; |
| } |
| entry->mem_size = 0; |
| } |
| |
| mwifiex_dbg(adapter, MSG, "== mwifiex firmware dump start ==\n"); |
| |
| /* Read the number of the memories which will dump */ |
| stat = mwifiex_pcie_rdwr_firmware(adapter, doneflag); |
| if (stat == RDWR_STATUS_FAILURE) |
| return; |
| |
| reg = creg->fw_dump_start; |
| mwifiex_read_reg_byte(adapter, reg, &fw_dump_num); |
| |
| /* W8997 chipset firmware dump will be restore in single region*/ |
| if (fw_dump_num == 0) |
| dump_num = 1; |
| else |
| dump_num = fw_dump_num; |
| |
| /* Read the length of every memory which will dump */ |
| for (idx = 0; idx < dump_num; idx++) { |
| struct memory_type_mapping *entry = |
| &adapter->mem_type_mapping_tbl[idx]; |
| memory_size = 0; |
| if (fw_dump_num != 0) { |
| stat = mwifiex_pcie_rdwr_firmware(adapter, doneflag); |
| if (stat == RDWR_STATUS_FAILURE) |
| return; |
| |
| reg = creg->fw_dump_start; |
| for (i = 0; i < 4; i++) { |
| mwifiex_read_reg_byte(adapter, reg, &read_reg); |
| memory_size |= (read_reg << (i * 8)); |
| reg++; |
| } |
| } else { |
| memory_size = MWIFIEX_FW_DUMP_MAX_MEMSIZE; |
| } |
| |
| if (memory_size == 0) { |
| mwifiex_dbg(adapter, MSG, "Firmware dump Finished!\n"); |
| ret = mwifiex_write_reg(adapter, creg->fw_dump_ctrl, |
| creg->fw_dump_read_done); |
| if (ret) { |
| mwifiex_dbg(adapter, ERROR, "PCIE write err\n"); |
| return; |
| } |
| break; |
| } |
| |
| mwifiex_dbg(adapter, DUMP, |
| "%s_SIZE=0x%x\n", entry->mem_name, memory_size); |
| entry->mem_ptr = vmalloc(memory_size + 1); |
| entry->mem_size = memory_size; |
| if (!entry->mem_ptr) { |
| mwifiex_dbg(adapter, ERROR, |
| "Vmalloc %s failed\n", entry->mem_name); |
| return; |
| } |
| dbg_ptr = entry->mem_ptr; |
| end_ptr = dbg_ptr + memory_size; |
| |
| doneflag = entry->done_flag; |
| mwifiex_dbg(adapter, DUMP, "Start %s output, please wait...\n", |
| entry->mem_name); |
| |
| do { |
| stat = mwifiex_pcie_rdwr_firmware(adapter, doneflag); |
| if (RDWR_STATUS_FAILURE == stat) |
| return; |
| |
| reg_start = creg->fw_dump_start; |
| reg_end = creg->fw_dump_end; |
| for (reg = reg_start; reg <= reg_end; reg++) { |
| mwifiex_read_reg_byte(adapter, reg, dbg_ptr); |
| if (dbg_ptr < end_ptr) { |
| dbg_ptr++; |
| continue; |
| } |
| mwifiex_dbg(adapter, ERROR, |
| "pre-allocated buf not enough\n"); |
| tmp_ptr = |
| vzalloc(memory_size + MWIFIEX_SIZE_4K); |
| if (!tmp_ptr) |
| return; |
| memcpy(tmp_ptr, entry->mem_ptr, memory_size); |
| vfree(entry->mem_ptr); |
| entry->mem_ptr = tmp_ptr; |
| tmp_ptr = NULL; |
| dbg_ptr = entry->mem_ptr + memory_size; |
| memory_size += MWIFIEX_SIZE_4K; |
| end_ptr = entry->mem_ptr + memory_size; |
| } |
| |
| if (stat != RDWR_STATUS_DONE) |
| continue; |
| |
| mwifiex_dbg(adapter, DUMP, |
| "%s done: size=0x%tx\n", |
| entry->mem_name, dbg_ptr - entry->mem_ptr); |
| break; |
| } while (true); |
| } |
| mwifiex_dbg(adapter, MSG, "== mwifiex firmware dump end ==\n"); |
| } |
| |
| static void mwifiex_pcie_device_dump_work(struct mwifiex_adapter *adapter) |
| { |
| adapter->devdump_data = vzalloc(MWIFIEX_FW_DUMP_SIZE); |
| if (!adapter->devdump_data) { |
| mwifiex_dbg(adapter, ERROR, |
| "vzalloc devdump data failure!\n"); |
| return; |
| } |
| |
| mwifiex_drv_info_dump(adapter); |
| mwifiex_pcie_fw_dump(adapter); |
| mwifiex_prepare_fw_dump_info(adapter); |
| mwifiex_upload_device_dump(adapter); |
| } |
| |
| static void mwifiex_pcie_card_reset_work(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| |
| /* We can't afford to wait here; remove() might be waiting on us. If we |
| * can't grab the device lock, maybe we'll get another chance later. |
| */ |
| pci_try_reset_function(card->dev); |
| } |
| |
| static void mwifiex_pcie_work(struct work_struct *work) |
| { |
| struct pcie_service_card *card = |
| container_of(work, struct pcie_service_card, work); |
| |
| if (test_and_clear_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, |
| &card->work_flags)) |
| mwifiex_pcie_device_dump_work(card->adapter); |
| if (test_and_clear_bit(MWIFIEX_IFACE_WORK_CARD_RESET, |
| &card->work_flags)) |
| mwifiex_pcie_card_reset_work(card->adapter); |
| } |
| |
| /* This function dumps FW information */ |
| static void mwifiex_pcie_device_dump(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| |
| if (!test_and_set_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, |
| &card->work_flags)) |
| schedule_work(&card->work); |
| } |
| |
| static void mwifiex_pcie_card_reset(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| |
| if (!test_and_set_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &card->work_flags)) |
| schedule_work(&card->work); |
| } |
| |
| static int mwifiex_pcie_alloc_buffers(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| int ret; |
| |
| card->cmdrsp_buf = NULL; |
| ret = mwifiex_pcie_create_txbd_ring(adapter); |
| if (ret) { |
| mwifiex_dbg(adapter, ERROR, "Failed to create txbd ring\n"); |
| goto err_cre_txbd; |
| } |
| |
| ret = mwifiex_pcie_create_rxbd_ring(adapter); |
| if (ret) { |
| mwifiex_dbg(adapter, ERROR, "Failed to create rxbd ring\n"); |
| goto err_cre_rxbd; |
| } |
| |
| ret = mwifiex_pcie_create_evtbd_ring(adapter); |
| if (ret) { |
| mwifiex_dbg(adapter, ERROR, "Failed to create evtbd ring\n"); |
| goto err_cre_evtbd; |
| } |
| |
| ret = mwifiex_pcie_alloc_cmdrsp_buf(adapter); |
| if (ret) { |
| mwifiex_dbg(adapter, ERROR, "Failed to allocate cmdbuf buffer\n"); |
| goto err_alloc_cmdbuf; |
| } |
| |
| if (reg->sleep_cookie) { |
| ret = mwifiex_pcie_alloc_sleep_cookie_buf(adapter); |
| if (ret) { |
| mwifiex_dbg(adapter, ERROR, "Failed to allocate sleep_cookie buffer\n"); |
| goto err_alloc_cookie; |
| } |
| } else { |
| card->sleep_cookie_vbase = NULL; |
| } |
| |
| return 0; |
| |
| err_alloc_cookie: |
| mwifiex_pcie_delete_cmdrsp_buf(adapter); |
| err_alloc_cmdbuf: |
| mwifiex_pcie_delete_evtbd_ring(adapter); |
| err_cre_evtbd: |
| mwifiex_pcie_delete_rxbd_ring(adapter); |
| err_cre_rxbd: |
| mwifiex_pcie_delete_txbd_ring(adapter); |
| err_cre_txbd: |
| return ret; |
| } |
| |
| static void mwifiex_pcie_free_buffers(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| |
| if (reg->sleep_cookie) |
| mwifiex_pcie_delete_sleep_cookie_buf(adapter); |
| |
| mwifiex_pcie_delete_cmdrsp_buf(adapter); |
| mwifiex_pcie_delete_evtbd_ring(adapter); |
| mwifiex_pcie_delete_rxbd_ring(adapter); |
| mwifiex_pcie_delete_txbd_ring(adapter); |
| } |
| |
| /* |
| * This function initializes the PCI-E host memory space, WCB rings, etc. |
| */ |
| static int mwifiex_init_pcie(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| int ret; |
| struct pci_dev *pdev = card->dev; |
| |
| pci_set_drvdata(pdev, card); |
| |
| ret = pci_enable_device(pdev); |
| if (ret) |
| goto err_enable_dev; |
| |
| pci_set_master(pdev); |
| |
| pr_notice("try set_consistent_dma_mask(32)\n"); |
| ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
| if (ret) { |
| pr_err("set_dma_mask(32) failed\n"); |
| goto err_set_dma_mask; |
| } |
| |
| ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); |
| if (ret) { |
| pr_err("set_consistent_dma_mask(64) failed\n"); |
| goto err_set_dma_mask; |
| } |
| |
| ret = pci_request_region(pdev, 0, DRV_NAME); |
| if (ret) { |
| pr_err("req_reg(0) error\n"); |
| goto err_req_region0; |
| } |
| card->pci_mmap = pci_iomap(pdev, 0, 0); |
| if (!card->pci_mmap) { |
| pr_err("iomap(0) error\n"); |
| ret = -EIO; |
| goto err_iomap0; |
| } |
| ret = pci_request_region(pdev, 2, DRV_NAME); |
| if (ret) { |
| pr_err("req_reg(2) error\n"); |
| goto err_req_region2; |
| } |
| card->pci_mmap1 = pci_iomap(pdev, 2, 0); |
| if (!card->pci_mmap1) { |
| pr_err("iomap(2) error\n"); |
| ret = -EIO; |
| goto err_iomap2; |
| } |
| |
| pr_notice("PCI memory map Virt0: %p PCI memory map Virt2: %p\n", |
| card->pci_mmap, card->pci_mmap1); |
| |
| ret = mwifiex_pcie_alloc_buffers(adapter); |
| if (ret) |
| goto err_alloc_buffers; |
| |
| return 0; |
| |
| err_alloc_buffers: |
| pci_iounmap(pdev, card->pci_mmap1); |
| err_iomap2: |
| pci_release_region(pdev, 2); |
| err_req_region2: |
| pci_iounmap(pdev, card->pci_mmap); |
| err_iomap0: |
| pci_release_region(pdev, 0); |
| err_req_region0: |
| err_set_dma_mask: |
| pci_disable_device(pdev); |
| err_enable_dev: |
| return ret; |
| } |
| |
| /* |
| * This function cleans up the allocated card buffers. |
| */ |
| static void mwifiex_cleanup_pcie(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| struct pci_dev *pdev = card->dev; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| int ret; |
| u32 fw_status; |
| |
| cancel_work_sync(&card->work); |
| |
| ret = mwifiex_read_reg(adapter, reg->fw_status, &fw_status); |
| if (fw_status == FIRMWARE_READY_PCIE) { |
| mwifiex_dbg(adapter, INFO, |
| "Clearing driver ready signature\n"); |
| if (mwifiex_write_reg(adapter, reg->drv_rdy, 0x00000000)) |
| mwifiex_dbg(adapter, ERROR, |
| "Failed to write driver not-ready signature\n"); |
| } |
| |
| pci_disable_device(pdev); |
| |
| pci_iounmap(pdev, card->pci_mmap); |
| pci_iounmap(pdev, card->pci_mmap1); |
| pci_release_region(pdev, 2); |
| pci_release_region(pdev, 0); |
| |
| mwifiex_pcie_free_buffers(adapter); |
| } |
| |
| static int mwifiex_pcie_request_irq(struct mwifiex_adapter *adapter) |
| { |
| int ret, i, j; |
| struct pcie_service_card *card = adapter->card; |
| struct pci_dev *pdev = card->dev; |
| |
| if (card->pcie.reg->msix_support) { |
| for (i = 0; i < MWIFIEX_NUM_MSIX_VECTORS; i++) |
| card->msix_entries[i].entry = i; |
| ret = pci_enable_msix_exact(pdev, card->msix_entries, |
| MWIFIEX_NUM_MSIX_VECTORS); |
| if (!ret) { |
| for (i = 0; i < MWIFIEX_NUM_MSIX_VECTORS; i++) { |
| card->msix_ctx[i].dev = pdev; |
| card->msix_ctx[i].msg_id = i; |
| |
| ret = request_irq(card->msix_entries[i].vector, |
| mwifiex_pcie_interrupt, 0, |
| "MWIFIEX_PCIE_MSIX", |
| &card->msix_ctx[i]); |
| if (ret) |
| break; |
| } |
| |
| if (ret) { |
| mwifiex_dbg(adapter, INFO, "request_irq fail: %d\n", |
| ret); |
| for (j = 0; j < i; j++) |
| free_irq(card->msix_entries[j].vector, |
| &card->msix_ctx[i]); |
| pci_disable_msix(pdev); |
| } else { |
| mwifiex_dbg(adapter, MSG, "MSIx enabled!"); |
| card->msix_enable = 1; |
| return 0; |
| } |
| } |
| } |
| |
| if (pci_enable_msi(pdev) != 0) |
| pci_disable_msi(pdev); |
| else |
| card->msi_enable = 1; |
| |
| mwifiex_dbg(adapter, INFO, "msi_enable = %d\n", card->msi_enable); |
| |
| card->share_irq_ctx.dev = pdev; |
| card->share_irq_ctx.msg_id = -1; |
| ret = request_irq(pdev->irq, mwifiex_pcie_interrupt, IRQF_SHARED, |
| "MRVL_PCIE", &card->share_irq_ctx); |
| if (ret) { |
| pr_err("request_irq failed: ret=%d\n", ret); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * This function gets the firmware name for downloading by revision id |
| * |
| * Read revision id register to get revision id |
| */ |
| static void mwifiex_pcie_get_fw_name(struct mwifiex_adapter *adapter) |
| { |
| int revision_id = 0; |
| int version, magic; |
| struct pcie_service_card *card = adapter->card; |
| |
| switch (card->dev->device) { |
| case PCIE_DEVICE_ID_MARVELL_88W8766P: |
| strcpy(adapter->fw_name, PCIE8766_DEFAULT_FW_NAME); |
| break; |
| case PCIE_DEVICE_ID_MARVELL_88W8897: |
| mwifiex_write_reg(adapter, 0x0c58, 0x80c00000); |
| mwifiex_read_reg(adapter, 0x0c58, &revision_id); |
| revision_id &= 0xff00; |
| switch (revision_id) { |
| case PCIE8897_A0: |
| strcpy(adapter->fw_name, PCIE8897_A0_FW_NAME); |
| break; |
| case PCIE8897_B0: |
| strcpy(adapter->fw_name, PCIE8897_B0_FW_NAME); |
| break; |
| default: |
| strcpy(adapter->fw_name, PCIE8897_DEFAULT_FW_NAME); |
| |
| break; |
| } |
| break; |
| case PCIE_DEVICE_ID_MARVELL_88W8997: |
| mwifiex_read_reg(adapter, 0x8, &revision_id); |
| mwifiex_read_reg(adapter, 0x0cd0, &version); |
| mwifiex_read_reg(adapter, 0x0cd4, &magic); |
| revision_id &= 0xff; |
| version &= 0x7; |
| magic &= 0xff; |
| if (revision_id == PCIE8997_A1 && |
| magic == CHIP_MAGIC_VALUE && |
| version == CHIP_VER_PCIEUART) |
| strcpy(adapter->fw_name, PCIEUART8997_FW_NAME_V4); |
| else |
| strcpy(adapter->fw_name, PCIEUSB8997_FW_NAME_V4); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /* |
| * This function registers the PCIE device. |
| * |
| * PCIE IRQ is claimed, block size is set and driver data is initialized. |
| */ |
| static int mwifiex_register_dev(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| |
| /* save adapter pointer in card */ |
| card->adapter = adapter; |
| |
| if (mwifiex_pcie_request_irq(adapter)) |
| return -1; |
| |
| adapter->tx_buf_size = card->pcie.tx_buf_size; |
| adapter->mem_type_mapping_tbl = card->pcie.mem_type_mapping_tbl; |
| adapter->num_mem_types = card->pcie.num_mem_types; |
| adapter->ext_scan = card->pcie.can_ext_scan; |
| mwifiex_pcie_get_fw_name(adapter); |
| |
| return 0; |
| } |
| |
| /* |
| * This function unregisters the PCIE device. |
| * |
| * The PCIE IRQ is released, the function is disabled and driver |
| * data is set to null. |
| */ |
| static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| struct pci_dev *pdev = card->dev; |
| int i; |
| |
| if (card->msix_enable) { |
| for (i = 0; i < MWIFIEX_NUM_MSIX_VECTORS; i++) |
| synchronize_irq(card->msix_entries[i].vector); |
| |
| for (i = 0; i < MWIFIEX_NUM_MSIX_VECTORS; i++) |
| free_irq(card->msix_entries[i].vector, |
| &card->msix_ctx[i]); |
| |
| card->msix_enable = 0; |
| pci_disable_msix(pdev); |
| } else { |
| mwifiex_dbg(adapter, INFO, |
| "%s(): calling free_irq()\n", __func__); |
| free_irq(card->dev->irq, &card->share_irq_ctx); |
| |
| if (card->msi_enable) |
| pci_disable_msi(pdev); |
| } |
| card->adapter = NULL; |
| } |
| |
| /* |
| * This function initializes the PCI-E host memory space, WCB rings, etc., |
| * similar to mwifiex_init_pcie(), but without resetting PCI-E state. |
| */ |
| static void mwifiex_pcie_up_dev(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| struct pci_dev *pdev = card->dev; |
| |
| /* tx_buf_size might be changed to 3584 by firmware during |
| * data transfer, we should reset it to default size. |
| */ |
| adapter->tx_buf_size = card->pcie.tx_buf_size; |
| |
| mwifiex_pcie_alloc_buffers(adapter); |
| |
| pci_set_master(pdev); |
| } |
| |
| /* This function cleans up the PCI-E host memory space. */ |
| static void mwifiex_pcie_down_dev(struct mwifiex_adapter *adapter) |
| { |
| struct pcie_service_card *card = adapter->card; |
| const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; |
| struct pci_dev *pdev = card->dev; |
| |
| if (mwifiex_write_reg(adapter, reg->drv_rdy, 0x00000000)) |
| mwifiex_dbg(adapter, ERROR, "Failed to write driver not-ready signature\n"); |
| |
| pci_clear_master(pdev); |
| |
| adapter->seq_num = 0; |
| |
| mwifiex_pcie_free_buffers(adapter); |
| } |
| |
| static struct mwifiex_if_ops pcie_ops = { |
| .init_if = mwifiex_init_pcie, |
| .cleanup_if = mwifiex_cleanup_pcie, |
| .check_fw_status = mwifiex_check_fw_status, |
| .check_winner_status = mwifiex_check_winner_status, |
| .prog_fw = mwifiex_prog_fw_w_helper, |
| .register_dev = mwifiex_register_dev, |
| .unregister_dev = mwifiex_unregister_dev, |
| .enable_int = mwifiex_pcie_enable_host_int, |
| .disable_int = mwifiex_pcie_disable_host_int_noerr, |
| .process_int_status = mwifiex_process_int_status, |
| .host_to_card = mwifiex_pcie_host_to_card, |
| .wakeup = mwifiex_pm_wakeup_card, |
| .wakeup_complete = mwifiex_pm_wakeup_card_complete, |
| |
| /* PCIE specific */ |
| .cmdrsp_complete = mwifiex_pcie_cmdrsp_complete, |
| .event_complete = mwifiex_pcie_event_complete, |
| .update_mp_end_port = NULL, |
| .cleanup_mpa_buf = NULL, |
| .init_fw_port = mwifiex_pcie_init_fw_port, |
| .clean_pcie_ring = mwifiex_clean_pcie_ring_buf, |
| .card_reset = mwifiex_pcie_card_reset, |
| .reg_dump = mwifiex_pcie_reg_dump, |
| .device_dump = mwifiex_pcie_device_dump, |
| .down_dev = mwifiex_pcie_down_dev, |
| .up_dev = mwifiex_pcie_up_dev, |
| }; |
| |
| module_pci_driver(mwifiex_pcie); |
| |
| MODULE_AUTHOR("Marvell International Ltd."); |
| MODULE_DESCRIPTION("Marvell WiFi-Ex PCI-Express Driver version " PCIE_VERSION); |
| MODULE_VERSION(PCIE_VERSION); |
| MODULE_LICENSE("GPL v2"); |