| /* |
| * Driver for Zarlink DVB-T MT352 demodulator |
| * |
| * Written by Holger Waechtler <holger@qanu.de> |
| * and Daniel Mack <daniel@qanu.de> |
| * |
| * AVerMedia AVerTV DVB-T 771 support by |
| * Wolfram Joost <dbox2@frokaschwei.de> |
| * |
| * Support for Samsung TDTC9251DH01C(M) tuner |
| * Copyright (C) 2004 Antonio Mancuso <antonio.mancuso@digitaltelevision.it> |
| * Amauri Celani <acelani@essegi.net> |
| * |
| * DVICO FusionHDTV DVB-T1 and DVICO FusionHDTV DVB-T Lite support by |
| * Christopher Pascoe <c.pascoe@itee.uq.edu.au> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * |
| * GNU General Public License for more details. |
| */ |
| |
| #ifndef _MT352_PRIV_ |
| #define _MT352_PRIV_ |
| |
| #define ID_MT352 0x13 |
| |
| #define msb(x) (((x) >> 8) & 0xff) |
| #define lsb(x) ((x) & 0xff) |
| |
| enum mt352_reg_addr { |
| STATUS_0 = 0x00, |
| STATUS_1 = 0x01, |
| STATUS_2 = 0x02, |
| STATUS_3 = 0x03, |
| STATUS_4 = 0x04, |
| INTERRUPT_0 = 0x05, |
| INTERRUPT_1 = 0x06, |
| INTERRUPT_2 = 0x07, |
| INTERRUPT_3 = 0x08, |
| SNR = 0x09, |
| VIT_ERR_CNT_2 = 0x0A, |
| VIT_ERR_CNT_1 = 0x0B, |
| VIT_ERR_CNT_0 = 0x0C, |
| RS_ERR_CNT_2 = 0x0D, |
| RS_ERR_CNT_1 = 0x0E, |
| RS_ERR_CNT_0 = 0x0F, |
| RS_UBC_1 = 0x10, |
| RS_UBC_0 = 0x11, |
| AGC_GAIN_3 = 0x12, |
| AGC_GAIN_2 = 0x13, |
| AGC_GAIN_1 = 0x14, |
| AGC_GAIN_0 = 0x15, |
| FREQ_OFFSET_2 = 0x17, |
| FREQ_OFFSET_1 = 0x18, |
| FREQ_OFFSET_0 = 0x19, |
| TIMING_OFFSET_1 = 0x1A, |
| TIMING_OFFSET_0 = 0x1B, |
| CHAN_FREQ_1 = 0x1C, |
| CHAN_FREQ_0 = 0x1D, |
| TPS_RECEIVED_1 = 0x1E, |
| TPS_RECEIVED_0 = 0x1F, |
| TPS_CURRENT_1 = 0x20, |
| TPS_CURRENT_0 = 0x21, |
| TPS_CELL_ID_1 = 0x22, |
| TPS_CELL_ID_0 = 0x23, |
| TPS_MISC_DATA_2 = 0x24, |
| TPS_MISC_DATA_1 = 0x25, |
| TPS_MISC_DATA_0 = 0x26, |
| RESET = 0x50, |
| TPS_GIVEN_1 = 0x51, |
| TPS_GIVEN_0 = 0x52, |
| ACQ_CTL = 0x53, |
| TRL_NOMINAL_RATE_1 = 0x54, |
| TRL_NOMINAL_RATE_0 = 0x55, |
| INPUT_FREQ_1 = 0x56, |
| INPUT_FREQ_0 = 0x57, |
| TUNER_ADDR = 0x58, |
| CHAN_START_1 = 0x59, |
| CHAN_START_0 = 0x5A, |
| CONT_1 = 0x5B, |
| CONT_0 = 0x5C, |
| TUNER_GO = 0x5D, |
| STATUS_EN_0 = 0x5F, |
| STATUS_EN_1 = 0x60, |
| INTERRUPT_EN_0 = 0x61, |
| INTERRUPT_EN_1 = 0x62, |
| INTERRUPT_EN_2 = 0x63, |
| INTERRUPT_EN_3 = 0x64, |
| AGC_TARGET = 0x67, |
| AGC_CTL = 0x68, |
| CAPT_RANGE = 0x75, |
| SNR_SELECT_1 = 0x79, |
| SNR_SELECT_0 = 0x7A, |
| RS_ERR_PER_1 = 0x7C, |
| RS_ERR_PER_0 = 0x7D, |
| CHIP_ID = 0x7F, |
| CHAN_STOP_1 = 0x80, |
| CHAN_STOP_0 = 0x81, |
| CHAN_STEP_1 = 0x82, |
| CHAN_STEP_0 = 0x83, |
| FEC_LOCK_TIME = 0x85, |
| OFDM_LOCK_TIME = 0x86, |
| ACQ_DELAY = 0x87, |
| SCAN_CTL = 0x88, |
| CLOCK_CTL = 0x89, |
| CONFIG = 0x8A, |
| MCLK_RATIO = 0x8B, |
| GPP_CTL = 0x8C, |
| ADC_CTL_1 = 0x8E, |
| ADC_CTL_0 = 0x8F |
| }; |
| |
| /* here we assume 1/6MHz == 166.66kHz stepsize */ |
| #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ |
| |
| #endif /* _MT352_PRIV_ */ |
