| /* |
| driver for LSI L64781 COFDM demodulator |
| |
| Copyright (C) 2001 Holger Waechtler for Convergence Integrated Media GmbH |
| Marko Kohtala <marko.kohtala@luukku.com> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <media/dvb_frontend.h> |
| #include "l64781.h" |
| |
| |
| struct l64781_state { |
| struct i2c_adapter* i2c; |
| const struct l64781_config* config; |
| struct dvb_frontend frontend; |
| |
| /* private demodulator data */ |
| unsigned int first:1; |
| }; |
| |
| #define dprintk(args...) \ |
| do { \ |
| if (debug) printk(KERN_DEBUG "l64781: " args); \ |
| } while (0) |
| |
| static int debug; |
| |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); |
| |
| |
| static int l64781_writereg (struct l64781_state* state, u8 reg, u8 data) |
| { |
| int ret; |
| u8 buf [] = { reg, data }; |
| struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; |
| |
| if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) |
| dprintk ("%s: write_reg error (reg == %02x) = %02x!\n", |
| __func__, reg, ret); |
| |
| return (ret != 1) ? -1 : 0; |
| } |
| |
| static int l64781_readreg (struct l64781_state* state, u8 reg) |
| { |
| int ret; |
| u8 b0 [] = { reg }; |
| u8 b1 [] = { 0 }; |
| struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, |
| { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; |
| |
| ret = i2c_transfer(state->i2c, msg, 2); |
| |
| if (ret != 2) return ret; |
| |
| return b1[0]; |
| } |
| |
| static void apply_tps (struct l64781_state* state) |
| { |
| l64781_writereg (state, 0x2a, 0x00); |
| l64781_writereg (state, 0x2a, 0x01); |
| |
| /* This here is a little bit questionable because it enables |
| the automatic update of TPS registers. I think we'd need to |
| handle the IRQ from FE to update some other registers as |
| well, or at least implement some magic to tuning to correct |
| to the TPS received from transmission. */ |
| l64781_writereg (state, 0x2a, 0x02); |
| } |
| |
| |
| static void reset_afc (struct l64781_state* state) |
| { |
| /* Set AFC stall for the AFC_INIT_FRQ setting, TIM_STALL for |
| timing offset */ |
| l64781_writereg (state, 0x07, 0x9e); /* stall AFC */ |
| l64781_writereg (state, 0x08, 0); /* AFC INIT FREQ */ |
| l64781_writereg (state, 0x09, 0); |
| l64781_writereg (state, 0x0a, 0); |
| l64781_writereg (state, 0x07, 0x8e); |
| l64781_writereg (state, 0x0e, 0); /* AGC gain to zero in beginning */ |
| l64781_writereg (state, 0x11, 0x80); /* stall TIM */ |
| l64781_writereg (state, 0x10, 0); /* TIM_OFFSET_LSB */ |
| l64781_writereg (state, 0x12, 0); |
| l64781_writereg (state, 0x13, 0); |
| l64781_writereg (state, 0x11, 0x00); |
| } |
| |
| static int reset_and_configure (struct l64781_state* state) |
| { |
| u8 buf [] = { 0x06 }; |
| struct i2c_msg msg = { .addr = 0x00, .flags = 0, .buf = buf, .len = 1 }; |
| // NOTE: this is correct in writing to address 0x00 |
| |
| return (i2c_transfer(state->i2c, &msg, 1) == 1) ? 0 : -ENODEV; |
| } |
| |
| static int apply_frontend_param(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| struct l64781_state* state = fe->demodulator_priv; |
| /* The coderates for FEC_NONE, FEC_4_5 and FEC_FEC_6_7 are arbitrary */ |
| static const u8 fec_tab[] = { 7, 0, 1, 2, 9, 3, 10, 4 }; |
| /* QPSK, QAM_16, QAM_64 */ |
| static const u8 qam_tab [] = { 2, 4, 0, 6 }; |
| static const u8 guard_tab [] = { 1, 2, 4, 8 }; |
| /* The Grundig 29504-401.04 Tuner comes with 18.432MHz crystal. */ |
| static const u32 ppm = 8000; |
| u32 ddfs_offset_fixed; |
| /* u32 ddfs_offset_variable = 0x6000-((1000000UL+ppm)/ */ |
| /* bw_tab[p->bandWidth]<<10)/15625; */ |
| u32 init_freq; |
| u32 spi_bias; |
| u8 val0x04; |
| u8 val0x05; |
| u8 val0x06; |
| int bw; |
| |
| switch (p->bandwidth_hz) { |
| case 8000000: |
| bw = 8; |
| break; |
| case 7000000: |
| bw = 7; |
| break; |
| case 6000000: |
| bw = 6; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (fe->ops.tuner_ops.set_params) { |
| fe->ops.tuner_ops.set_params(fe); |
| if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); |
| } |
| |
| if (p->inversion != INVERSION_ON && |
| p->inversion != INVERSION_OFF) |
| return -EINVAL; |
| |
| if (p->code_rate_HP != FEC_1_2 && p->code_rate_HP != FEC_2_3 && |
| p->code_rate_HP != FEC_3_4 && p->code_rate_HP != FEC_5_6 && |
| p->code_rate_HP != FEC_7_8) |
| return -EINVAL; |
| |
| if (p->hierarchy != HIERARCHY_NONE && |
| (p->code_rate_LP != FEC_1_2 && p->code_rate_LP != FEC_2_3 && |
| p->code_rate_LP != FEC_3_4 && p->code_rate_LP != FEC_5_6 && |
| p->code_rate_LP != FEC_7_8)) |
| return -EINVAL; |
| |
| if (p->modulation != QPSK && p->modulation != QAM_16 && |
| p->modulation != QAM_64) |
| return -EINVAL; |
| |
| if (p->transmission_mode != TRANSMISSION_MODE_2K && |
| p->transmission_mode != TRANSMISSION_MODE_8K) |
| return -EINVAL; |
| |
| if ((int)p->guard_interval < GUARD_INTERVAL_1_32 || |
| p->guard_interval > GUARD_INTERVAL_1_4) |
| return -EINVAL; |
| |
| if ((int)p->hierarchy < HIERARCHY_NONE || |
| p->hierarchy > HIERARCHY_4) |
| return -EINVAL; |
| |
| ddfs_offset_fixed = 0x4000-(ppm<<16)/bw/1000000; |
| |
| /* This works up to 20000 ppm, it overflows if too large ppm! */ |
| init_freq = (((8UL<<25) + (8UL<<19) / 25*ppm / (15625/25)) / |
| bw & 0xFFFFFF); |
| |
| /* SPI bias calculation is slightly modified to fit in 32bit */ |
| /* will work for high ppm only... */ |
| spi_bias = 378 * (1 << 10); |
| spi_bias *= 16; |
| spi_bias *= bw; |
| spi_bias *= qam_tab[p->modulation]; |
| spi_bias /= p->code_rate_HP + 1; |
| spi_bias /= (guard_tab[p->guard_interval] + 32); |
| spi_bias *= 1000; |
| spi_bias /= 1000 + ppm/1000; |
| spi_bias *= p->code_rate_HP; |
| |
| val0x04 = (p->transmission_mode << 2) | p->guard_interval; |
| val0x05 = fec_tab[p->code_rate_HP]; |
| |
| if (p->hierarchy != HIERARCHY_NONE) |
| val0x05 |= (p->code_rate_LP - FEC_1_2) << 3; |
| |
| val0x06 = (p->hierarchy << 2) | p->modulation; |
| |
| l64781_writereg (state, 0x04, val0x04); |
| l64781_writereg (state, 0x05, val0x05); |
| l64781_writereg (state, 0x06, val0x06); |
| |
| reset_afc (state); |
| |
| /* Technical manual section 2.6.1, TIM_IIR_GAIN optimal values */ |
| l64781_writereg (state, 0x15, |
| p->transmission_mode == TRANSMISSION_MODE_2K ? 1 : 3); |
| l64781_writereg (state, 0x16, init_freq & 0xff); |
| l64781_writereg (state, 0x17, (init_freq >> 8) & 0xff); |
| l64781_writereg (state, 0x18, (init_freq >> 16) & 0xff); |
| |
| l64781_writereg (state, 0x1b, spi_bias & 0xff); |
| l64781_writereg (state, 0x1c, (spi_bias >> 8) & 0xff); |
| l64781_writereg (state, 0x1d, ((spi_bias >> 16) & 0x7f) | |
| (p->inversion == INVERSION_ON ? 0x80 : 0x00)); |
| |
| l64781_writereg (state, 0x22, ddfs_offset_fixed & 0xff); |
| l64781_writereg (state, 0x23, (ddfs_offset_fixed >> 8) & 0x3f); |
| |
| l64781_readreg (state, 0x00); /* clear interrupt registers... */ |
| l64781_readreg (state, 0x01); /* dto. */ |
| |
| apply_tps (state); |
| |
| return 0; |
| } |
| |
| static int get_frontend(struct dvb_frontend *fe, |
| struct dtv_frontend_properties *p) |
| { |
| struct l64781_state* state = fe->demodulator_priv; |
| int tmp; |
| |
| |
| tmp = l64781_readreg(state, 0x04); |
| switch(tmp & 3) { |
| case 0: |
| p->guard_interval = GUARD_INTERVAL_1_32; |
| break; |
| case 1: |
| p->guard_interval = GUARD_INTERVAL_1_16; |
| break; |
| case 2: |
| p->guard_interval = GUARD_INTERVAL_1_8; |
| break; |
| case 3: |
| p->guard_interval = GUARD_INTERVAL_1_4; |
| break; |
| } |
| switch((tmp >> 2) & 3) { |
| case 0: |
| p->transmission_mode = TRANSMISSION_MODE_2K; |
| break; |
| case 1: |
| p->transmission_mode = TRANSMISSION_MODE_8K; |
| break; |
| default: |
| printk(KERN_WARNING "Unexpected value for transmission_mode\n"); |
| } |
| |
| tmp = l64781_readreg(state, 0x05); |
| switch(tmp & 7) { |
| case 0: |
| p->code_rate_HP = FEC_1_2; |
| break; |
| case 1: |
| p->code_rate_HP = FEC_2_3; |
| break; |
| case 2: |
| p->code_rate_HP = FEC_3_4; |
| break; |
| case 3: |
| p->code_rate_HP = FEC_5_6; |
| break; |
| case 4: |
| p->code_rate_HP = FEC_7_8; |
| break; |
| default: |
| printk("Unexpected value for code_rate_HP\n"); |
| } |
| switch((tmp >> 3) & 7) { |
| case 0: |
| p->code_rate_LP = FEC_1_2; |
| break; |
| case 1: |
| p->code_rate_LP = FEC_2_3; |
| break; |
| case 2: |
| p->code_rate_LP = FEC_3_4; |
| break; |
| case 3: |
| p->code_rate_LP = FEC_5_6; |
| break; |
| case 4: |
| p->code_rate_LP = FEC_7_8; |
| break; |
| default: |
| printk("Unexpected value for code_rate_LP\n"); |
| } |
| |
| tmp = l64781_readreg(state, 0x06); |
| switch(tmp & 3) { |
| case 0: |
| p->modulation = QPSK; |
| break; |
| case 1: |
| p->modulation = QAM_16; |
| break; |
| case 2: |
| p->modulation = QAM_64; |
| break; |
| default: |
| printk(KERN_WARNING "Unexpected value for modulation\n"); |
| } |
| switch((tmp >> 2) & 7) { |
| case 0: |
| p->hierarchy = HIERARCHY_NONE; |
| break; |
| case 1: |
| p->hierarchy = HIERARCHY_1; |
| break; |
| case 2: |
| p->hierarchy = HIERARCHY_2; |
| break; |
| case 3: |
| p->hierarchy = HIERARCHY_4; |
| break; |
| default: |
| printk("Unexpected value for hierarchy\n"); |
| } |
| |
| |
| tmp = l64781_readreg (state, 0x1d); |
| p->inversion = (tmp & 0x80) ? INVERSION_ON : INVERSION_OFF; |
| |
| tmp = (int) (l64781_readreg (state, 0x08) | |
| (l64781_readreg (state, 0x09) << 8) | |
| (l64781_readreg (state, 0x0a) << 16)); |
| p->frequency += tmp; |
| |
| return 0; |
| } |
| |
| static int l64781_read_status(struct dvb_frontend *fe, enum fe_status *status) |
| { |
| struct l64781_state* state = fe->demodulator_priv; |
| int sync = l64781_readreg (state, 0x32); |
| int gain = l64781_readreg (state, 0x0e); |
| |
| l64781_readreg (state, 0x00); /* clear interrupt registers... */ |
| l64781_readreg (state, 0x01); /* dto. */ |
| |
| *status = 0; |
| |
| if (gain > 5) |
| *status |= FE_HAS_SIGNAL; |
| |
| if (sync & 0x02) /* VCXO locked, this criteria should be ok */ |
| *status |= FE_HAS_CARRIER; |
| |
| if (sync & 0x20) |
| *status |= FE_HAS_VITERBI; |
| |
| if (sync & 0x40) |
| *status |= FE_HAS_SYNC; |
| |
| if (sync == 0x7f) |
| *status |= FE_HAS_LOCK; |
| |
| return 0; |
| } |
| |
| static int l64781_read_ber(struct dvb_frontend* fe, u32* ber) |
| { |
| struct l64781_state* state = fe->demodulator_priv; |
| |
| /* XXX FIXME: set up counting period (reg 0x26...0x28) |
| */ |
| *ber = l64781_readreg (state, 0x39) |
| | (l64781_readreg (state, 0x3a) << 8); |
| |
| return 0; |
| } |
| |
| static int l64781_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) |
| { |
| struct l64781_state* state = fe->demodulator_priv; |
| |
| u8 gain = l64781_readreg (state, 0x0e); |
| *signal_strength = (gain << 8) | gain; |
| |
| return 0; |
| } |
| |
| static int l64781_read_snr(struct dvb_frontend* fe, u16* snr) |
| { |
| struct l64781_state* state = fe->demodulator_priv; |
| |
| u8 avg_quality = 0xff - l64781_readreg (state, 0x33); |
| *snr = (avg_quality << 8) | avg_quality; /* not exact, but...*/ |
| |
| return 0; |
| } |
| |
| static int l64781_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) |
| { |
| struct l64781_state* state = fe->demodulator_priv; |
| |
| *ucblocks = l64781_readreg (state, 0x37) |
| | (l64781_readreg (state, 0x38) << 8); |
| |
| return 0; |
| } |
| |
| static int l64781_sleep(struct dvb_frontend* fe) |
| { |
| struct l64781_state* state = fe->demodulator_priv; |
| |
| /* Power down */ |
| return l64781_writereg (state, 0x3e, 0x5a); |
| } |
| |
| static int l64781_init(struct dvb_frontend* fe) |
| { |
| struct l64781_state* state = fe->demodulator_priv; |
| |
| reset_and_configure (state); |
| |
| /* Power up */ |
| l64781_writereg (state, 0x3e, 0xa5); |
| |
| /* Reset hard */ |
| l64781_writereg (state, 0x2a, 0x04); |
| l64781_writereg (state, 0x2a, 0x00); |
| |
| /* Set tuner specific things */ |
| /* AFC_POL, set also in reset_afc */ |
| l64781_writereg (state, 0x07, 0x8e); |
| |
| /* Use internal ADC */ |
| l64781_writereg (state, 0x0b, 0x81); |
| |
| /* AGC loop gain, and polarity is positive */ |
| l64781_writereg (state, 0x0c, 0x84); |
| |
| /* Internal ADC outputs two's complement */ |
| l64781_writereg (state, 0x0d, 0x8c); |
| |
| /* With ppm=8000, it seems the DTR_SENSITIVITY will result in |
| value of 2 with all possible bandwidths and guard |
| intervals, which is the initial value anyway. */ |
| /*l64781_writereg (state, 0x19, 0x92);*/ |
| |
| /* Everything is two's complement, soft bit and CSI_OUT too */ |
| l64781_writereg (state, 0x1e, 0x09); |
| |
| /* delay a bit after first init attempt */ |
| if (state->first) { |
| state->first = 0; |
| msleep(200); |
| } |
| |
| return 0; |
| } |
| |
| static int l64781_get_tune_settings(struct dvb_frontend* fe, |
| struct dvb_frontend_tune_settings* fesettings) |
| { |
| fesettings->min_delay_ms = 4000; |
| fesettings->step_size = 0; |
| fesettings->max_drift = 0; |
| return 0; |
| } |
| |
| static void l64781_release(struct dvb_frontend* fe) |
| { |
| struct l64781_state* state = fe->demodulator_priv; |
| kfree(state); |
| } |
| |
| static const struct dvb_frontend_ops l64781_ops; |
| |
| struct dvb_frontend* l64781_attach(const struct l64781_config* config, |
| struct i2c_adapter* i2c) |
| { |
| struct l64781_state* state = NULL; |
| int reg0x3e = -1; |
| u8 b0 [] = { 0x1a }; |
| u8 b1 [] = { 0x00 }; |
| struct i2c_msg msg [] = { { .addr = config->demod_address, .flags = 0, .buf = b0, .len = 1 }, |
| { .addr = config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; |
| |
| /* allocate memory for the internal state */ |
| state = kzalloc(sizeof(struct l64781_state), GFP_KERNEL); |
| if (state == NULL) goto error; |
| |
| /* setup the state */ |
| state->config = config; |
| state->i2c = i2c; |
| state->first = 1; |
| |
| /* |
| * the L64781 won't show up before we send the reset_and_configure() |
| * broadcast. If nothing responds there is no L64781 on the bus... |
| */ |
| if (reset_and_configure(state) < 0) { |
| dprintk("No response to reset and configure broadcast...\n"); |
| goto error; |
| } |
| |
| /* The chip always responds to reads */ |
| if (i2c_transfer(state->i2c, msg, 2) != 2) { |
| dprintk("No response to read on I2C bus\n"); |
| goto error; |
| } |
| |
| /* Save current register contents for bailout */ |
| reg0x3e = l64781_readreg(state, 0x3e); |
| |
| /* Reading the POWER_DOWN register always returns 0 */ |
| if (reg0x3e != 0) { |
| dprintk("Device doesn't look like L64781\n"); |
| goto error; |
| } |
| |
| /* Turn the chip off */ |
| l64781_writereg (state, 0x3e, 0x5a); |
| |
| /* Responds to all reads with 0 */ |
| if (l64781_readreg(state, 0x1a) != 0) { |
| dprintk("Read 1 returned unexpected value\n"); |
| goto error; |
| } |
| |
| /* Turn the chip on */ |
| l64781_writereg (state, 0x3e, 0xa5); |
| |
| /* Responds with register default value */ |
| if (l64781_readreg(state, 0x1a) != 0xa1) { |
| dprintk("Read 2 returned unexpected value\n"); |
| goto error; |
| } |
| |
| /* create dvb_frontend */ |
| memcpy(&state->frontend.ops, &l64781_ops, sizeof(struct dvb_frontend_ops)); |
| state->frontend.demodulator_priv = state; |
| return &state->frontend; |
| |
| error: |
| if (reg0x3e >= 0) |
| l64781_writereg (state, 0x3e, reg0x3e); /* restore reg 0x3e */ |
| kfree(state); |
| return NULL; |
| } |
| |
| static const struct dvb_frontend_ops l64781_ops = { |
| .delsys = { SYS_DVBT }, |
| .info = { |
| .name = "LSI L64781 DVB-T", |
| /* .frequency_min_hz = ???,*/ |
| /* .frequency_max_hz = ???,*/ |
| .frequency_stepsize_hz = 166666, |
| /* .symbol_rate_tolerance = ???,*/ |
| .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | |
| FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | |
| FE_CAN_MUTE_TS |
| }, |
| |
| .release = l64781_release, |
| |
| .init = l64781_init, |
| .sleep = l64781_sleep, |
| |
| .set_frontend = apply_frontend_param, |
| .get_frontend = get_frontend, |
| .get_tune_settings = l64781_get_tune_settings, |
| |
| .read_status = l64781_read_status, |
| .read_ber = l64781_read_ber, |
| .read_signal_strength = l64781_read_signal_strength, |
| .read_snr = l64781_read_snr, |
| .read_ucblocks = l64781_read_ucblocks, |
| }; |
| |
| MODULE_DESCRIPTION("LSI L64781 DVB-T Demodulator driver"); |
| MODULE_AUTHOR("Holger Waechtler, Marko Kohtala"); |
| MODULE_LICENSE("GPL"); |
| |
| EXPORT_SYMBOL(l64781_attach); |