| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (c) 2017 Amlogic, Inc. All rights reserved. |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/axg-audio-clkc.h> |
| #include <dt-bindings/clock/axg-clkc.h> |
| #include <dt-bindings/clock/axg-aoclkc.h> |
| #include <dt-bindings/gpio/meson-axg-gpio.h> |
| #include <dt-bindings/reset/amlogic,meson-axg-reset.h> |
| |
| / { |
| compatible = "amlogic,meson-axg"; |
| |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| /* 16 MiB reserved for Hardware ROM Firmware */ |
| hwrom_reserved: hwrom@0 { |
| reg = <0x0 0x0 0x0 0x1000000>; |
| no-map; |
| }; |
| |
| /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ |
| secmon_reserved: secmon@5000000 { |
| reg = <0x0 0x05000000 0x0 0x300000>; |
| no-map; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <0x2>; |
| #size-cells = <0x0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x0 0x0>; |
| enable-method = "psci"; |
| next-level-cache = <&l2>; |
| }; |
| |
| cpu1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x0 0x1>; |
| enable-method = "psci"; |
| next-level-cache = <&l2>; |
| }; |
| |
| cpu2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x0 0x2>; |
| enable-method = "psci"; |
| next-level-cache = <&l2>; |
| }; |
| |
| cpu3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x0 0x3>; |
| enable-method = "psci"; |
| next-level-cache = <&l2>; |
| }; |
| |
| l2: l2-cache0 { |
| compatible = "cache"; |
| }; |
| }; |
| |
| arm-pmu { |
| compatible = "arm,cortex-a53-pmu"; |
| interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| }; |
| |
| tdmif_a: audio-controller@0 { |
| compatible = "amlogic,axg-tdm-iface"; |
| #sound-dai-cells = <0>; |
| sound-name-prefix = "TDM_A"; |
| clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, |
| <&clkc_audio AUD_CLKID_MST_A_SCLK>, |
| <&clkc_audio AUD_CLKID_MST_A_LRCLK>; |
| clock-names = "mclk", "sclk", "lrclk"; |
| status = "disabled"; |
| }; |
| |
| tdmif_b: audio-controller@1 { |
| compatible = "amlogic,axg-tdm-iface"; |
| #sound-dai-cells = <0>; |
| sound-name-prefix = "TDM_B"; |
| clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, |
| <&clkc_audio AUD_CLKID_MST_B_SCLK>, |
| <&clkc_audio AUD_CLKID_MST_B_LRCLK>; |
| clock-names = "mclk", "sclk", "lrclk"; |
| status = "disabled"; |
| }; |
| |
| tdmif_c: audio-controller@2 { |
| compatible = "amlogic,axg-tdm-iface"; |
| #sound-dai-cells = <0>; |
| sound-name-prefix = "TDM_C"; |
| clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, |
| <&clkc_audio AUD_CLKID_MST_C_SCLK>, |
| <&clkc_audio AUD_CLKID_MST_C_LRCLK>; |
| clock-names = "mclk", "sclk", "lrclk"; |
| status = "disabled"; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 |
| (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 |
| (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 |
| (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 |
| (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| xtal: xtal-clk { |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-output-names = "xtal"; |
| #clock-cells = <0>; |
| }; |
| |
| ao_alt_xtal: ao_alt_xtal-clk { |
| compatible = "fixed-clock"; |
| clock-frequency = <32000000>; |
| clock-output-names = "ao_alt_xtal"; |
| #clock-cells = <0>; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| apb: apb@ffe00000 { |
| compatible = "simple-bus"; |
| reg = <0x0 0xffe00000 0x0 0x200000>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; |
| |
| sd_emmc_b: sd@5000 { |
| compatible = "amlogic,meson-axg-mmc"; |
| reg = <0x0 0x5000 0x0 0x800>; |
| interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| clocks = <&clkc CLKID_SD_EMMC_B>, |
| <&clkc CLKID_SD_EMMC_B_CLK0>, |
| <&clkc CLKID_FCLK_DIV2>; |
| clock-names = "core", "clkin0", "clkin1"; |
| resets = <&reset RESET_SD_EMMC_B>; |
| }; |
| |
| sd_emmc_c: mmc@7000 { |
| compatible = "amlogic,meson-axg-mmc"; |
| reg = <0x0 0x7000 0x0 0x800>; |
| interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| clocks = <&clkc CLKID_SD_EMMC_C>, |
| <&clkc CLKID_SD_EMMC_C_CLK0>, |
| <&clkc CLKID_FCLK_DIV2>; |
| clock-names = "core", "clkin0", "clkin1"; |
| resets = <&reset RESET_SD_EMMC_C>; |
| }; |
| }; |
| |
| audio: bus@ff642000 { |
| compatible = "simple-bus"; |
| reg = <0x0 0xff642000 0x0 0x2000>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>; |
| |
| clkc_audio: clock-controller@0 { |
| compatible = "amlogic,axg-audio-clkc"; |
| reg = <0x0 0x0 0x0 0xb4>; |
| #clock-cells = <1>; |
| |
| clocks = <&clkc CLKID_AUDIO>, |
| <&clkc CLKID_MPLL0>, |
| <&clkc CLKID_MPLL1>, |
| <&clkc CLKID_MPLL2>, |
| <&clkc CLKID_MPLL3>, |
| <&clkc CLKID_HIFI_PLL>, |
| <&clkc CLKID_FCLK_DIV3>, |
| <&clkc CLKID_FCLK_DIV4>, |
| <&clkc CLKID_GP0_PLL>; |
| clock-names = "pclk", |
| "mst_in0", |
| "mst_in1", |
| "mst_in2", |
| "mst_in3", |
| "mst_in4", |
| "mst_in5", |
| "mst_in6", |
| "mst_in7"; |
| |
| resets = <&reset RESET_AUDIO>; |
| }; |
| |
| arb: reset-controller@280 { |
| compatible = "amlogic,meson-axg-audio-arb"; |
| reg = <0x0 0x280 0x0 0x4>; |
| #reset-cells = <1>; |
| clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; |
| }; |
| |
| tdmin_a: audio-controller@300 { |
| compatible = "amlogic,axg-tdmin"; |
| reg = <0x0 0x300 0x0 0x40>; |
| sound-name-prefix = "TDMIN_A"; |
| clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, |
| <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, |
| <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, |
| <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, |
| <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; |
| clock-names = "pclk", "sclk", "sclk_sel", |
| "lrclk", "lrclk_sel"; |
| status = "disabled"; |
| }; |
| |
| tdmin_b: audio-controller@340 { |
| compatible = "amlogic,axg-tdmin"; |
| reg = <0x0 0x340 0x0 0x40>; |
| sound-name-prefix = "TDMIN_B"; |
| clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, |
| <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, |
| <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, |
| <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, |
| <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; |
| clock-names = "pclk", "sclk", "sclk_sel", |
| "lrclk", "lrclk_sel"; |
| status = "disabled"; |
| }; |
| |
| tdmin_c: audio-controller@380 { |
| compatible = "amlogic,axg-tdmin"; |
| reg = <0x0 0x380 0x0 0x40>; |
| sound-name-prefix = "TDMIN_C"; |
| clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, |
| <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, |
| <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, |
| <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, |
| <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; |
| clock-names = "pclk", "sclk", "sclk_sel", |
| "lrclk", "lrclk_sel"; |
| status = "disabled"; |
| }; |
| |
| tdmin_lb: audio-controller@3c0 { |
| compatible = "amlogic,axg-tdmin"; |
| reg = <0x0 0x3c0 0x0 0x40>; |
| sound-name-prefix = "TDMIN_LB"; |
| clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, |
| <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, |
| <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, |
| <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, |
| <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; |
| clock-names = "pclk", "sclk", "sclk_sel", |
| "lrclk", "lrclk_sel"; |
| status = "disabled"; |
| }; |
| |
| spdifout: audio-controller@480 { |
| compatible = "amlogic,axg-spdifout"; |
| reg = <0x0 0x480 0x0 0x50>; |
| #sound-dai-cells = <0>; |
| sound-name-prefix = "SPDIFOUT"; |
| clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, |
| <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; |
| clock-names = "pclk", "mclk"; |
| status = "disabled"; |
| }; |
| |
| tdmout_a: audio-controller@500 { |
| compatible = "amlogic,axg-tdmout"; |
| reg = <0x0 0x500 0x0 0x40>; |
| sound-name-prefix = "TDMOUT_A"; |
| clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, |
| <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, |
| <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, |
| <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, |
| <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; |
| clock-names = "pclk", "sclk", "sclk_sel", |
| "lrclk", "lrclk_sel"; |
| status = "disabled"; |
| }; |
| |
| tdmout_b: audio-controller@540 { |
| compatible = "amlogic,axg-tdmout"; |
| reg = <0x0 0x540 0x0 0x40>; |
| sound-name-prefix = "TDMOUT_B"; |
| clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, |
| <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, |
| <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, |
| <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, |
| <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; |
| clock-names = "pclk", "sclk", "sclk_sel", |
| "lrclk", "lrclk_sel"; |
| status = "disabled"; |
| }; |
| |
| tdmout_c: audio-controller@580 { |
| compatible = "amlogic,axg-tdmout"; |
| reg = <0x0 0x580 0x0 0x40>; |
| sound-name-prefix = "TDMOUT_C"; |
| clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, |
| <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, |
| <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, |
| <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, |
| <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; |
| clock-names = "pclk", "sclk", "sclk_sel", |
| "lrclk", "lrclk_sel"; |
| status = "disabled"; |
| }; |
| }; |
| |
| cbus: bus@ffd00000 { |
| compatible = "simple-bus"; |
| reg = <0x0 0xffd00000 0x0 0x25000>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; |
| |
| gpio_intc: interrupt-controller@f080 { |
| compatible = "amlogic,meson-gpio-intc"; |
| reg = <0x0 0xf080 0x0 0x10>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; |
| status = "disabled"; |
| }; |
| |
| pwm_ab: pwm@1b000 { |
| compatible = "amlogic,meson-axg-ee-pwm"; |
| reg = <0x0 0x1b000 0x0 0x20>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm_cd: pwm@1a000 { |
| compatible = "amlogic,meson-axg-ee-pwm"; |
| reg = <0x0 0x1a000 0x0 0x20>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| reset: reset-controller@1004 { |
| compatible = "amlogic,meson-axg-reset"; |
| reg = <0x0 0x01004 0x0 0x9c>; |
| #reset-cells = <1>; |
| }; |
| |
| spicc0: spi@13000 { |
| compatible = "amlogic,meson-axg-spicc"; |
| reg = <0x0 0x13000 0x0 0x3c>; |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clkc CLKID_SPICC0>; |
| clock-names = "core"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spicc1: spi@15000 { |
| compatible = "amlogic,meson-axg-spicc"; |
| reg = <0x0 0x15000 0x0 0x3c>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clkc CLKID_SPICC1>; |
| clock-names = "core"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@1f000 { |
| compatible = "amlogic,meson-axg-i2c"; |
| reg = <0x0 0x1f000 0x0 0x20>; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&clkc CLKID_I2C>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@1e000 { |
| compatible = "amlogic,meson-axg-i2c"; |
| reg = <0x0 0x1e000 0x0 0x20>; |
| interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&clkc CLKID_I2C>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@1d000 { |
| compatible = "amlogic,meson-axg-i2c"; |
| reg = <0x0 0x1d000 0x0 0x20>; |
| interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&clkc CLKID_I2C>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@1c000 { |
| compatible = "amlogic,meson-axg-i2c"; |
| reg = <0x0 0x1c000 0x0 0x20>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&clkc CLKID_I2C>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| uart_A: serial@24000 { |
| compatible = "amlogic,meson-gx-uart"; |
| reg = <0x0 0x24000 0x0 0x18>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; |
| clock-names = "xtal", "pclk", "baud"; |
| }; |
| |
| uart_B: serial@23000 { |
| compatible = "amlogic,meson-gx-uart"; |
| reg = <0x0 0x23000 0x0 0x18>; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; |
| clock-names = "xtal", "pclk", "baud"; |
| }; |
| }; |
| |
| ethmac: ethernet@ff3f0000 { |
| compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac"; |
| reg = <0x0 0xff3f0000 0x0 0x10000 |
| 0x0 0xff634540 0x0 0x8>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "macirq"; |
| clocks = <&clkc CLKID_ETH>, |
| <&clkc CLKID_FCLK_DIV2>, |
| <&clkc CLKID_MPLL2>; |
| clock-names = "stmmaceth", "clkin0", "clkin1"; |
| status = "disabled"; |
| }; |
| |
| gic: interrupt-controller@ffc01000 { |
| compatible = "arm,gic-400"; |
| reg = <0x0 0xffc01000 0 0x1000>, |
| <0x0 0xffc02000 0 0x2000>, |
| <0x0 0xffc04000 0 0x2000>, |
| <0x0 0xffc06000 0 0x2000>; |
| interrupt-controller; |
| interrupts = <GIC_PPI 9 |
| (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| }; |
| |
| hiubus: bus@ff63c000 { |
| compatible = "simple-bus"; |
| reg = <0x0 0xff63c000 0x0 0x1c00>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; |
| |
| sysctrl: system-controller@0 { |
| compatible = "amlogic,meson-axg-hhi-sysctrl", "syscon", "simple-mfd"; |
| reg = <0 0 0 0x400>; |
| |
| clkc: clock-controller { |
| compatible = "amlogic,axg-clkc"; |
| #clock-cells = <1>; |
| }; |
| }; |
| }; |
| |
| mailbox: mailbox@ff63dc00 { |
| compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; |
| reg = <0 0xff63dc00 0 0x400>; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>; |
| #mbox-cells = <1>; |
| }; |
| |
| periphs: periphs@ff634000 { |
| compatible = "simple-bus"; |
| reg = <0x0 0xff634000 0x0 0x2000>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; |
| |
| hwrng: rng { |
| compatible = "amlogic,meson-rng"; |
| reg = <0x0 0x18 0x0 0x4>; |
| clocks = <&clkc CLKID_RNG0>; |
| clock-names = "core"; |
| }; |
| |
| pinctrl_periphs: pinctrl@480 { |
| compatible = "amlogic,meson-axg-periphs-pinctrl"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| gpio: bank@480 { |
| reg = <0x0 0x00480 0x0 0x40>, |
| <0x0 0x004e8 0x0 0x14>, |
| <0x0 0x00520 0x0 0x14>, |
| <0x0 0x00430 0x0 0x3c>; |
| reg-names = "mux", "pull", "pull-enable", "gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pinctrl_periphs 0 0 86>; |
| }; |
| |
| emmc_pins: emmc { |
| mux { |
| groups = "emmc_nand_d0", |
| "emmc_nand_d1", |
| "emmc_nand_d2", |
| "emmc_nand_d3", |
| "emmc_nand_d4", |
| "emmc_nand_d5", |
| "emmc_nand_d6", |
| "emmc_nand_d7", |
| "emmc_clk", |
| "emmc_cmd", |
| "emmc_ds"; |
| function = "emmc"; |
| }; |
| }; |
| |
| emmc_clk_gate_pins: emmc_clk_gate { |
| mux { |
| groups = "BOOT_8"; |
| function = "gpio_periphs"; |
| }; |
| cfg-pull-down { |
| pins = "BOOT_8"; |
| bias-pull-down; |
| }; |
| }; |
| |
| sdio_pins: sdio { |
| mux { |
| groups = "sdio_d0", |
| "sdio_d1", |
| "sdio_d2", |
| "sdio_d3", |
| "sdio_cmd", |
| "sdio_clk"; |
| function = "sdio"; |
| }; |
| }; |
| |
| sdio_clk_gate_pins: sdio_clk_gate { |
| mux { |
| groups = "GPIOX_4"; |
| function = "gpio_periphs"; |
| }; |
| cfg-pull-down { |
| pins = "GPIOX_4"; |
| bias-pull-down; |
| }; |
| }; |
| |
| eth_rmii_x_pins: eth-x-rmii { |
| mux { |
| groups = "eth_mdio_x", |
| "eth_mdc_x", |
| "eth_rgmii_rx_clk_x", |
| "eth_rx_dv_x", |
| "eth_rxd0_x", |
| "eth_rxd1_x", |
| "eth_txen_x", |
| "eth_txd0_x", |
| "eth_txd1_x"; |
| function = "eth"; |
| }; |
| }; |
| |
| eth_rmii_y_pins: eth-y-rmii { |
| mux { |
| groups = "eth_mdio_y", |
| "eth_mdc_y", |
| "eth_rgmii_rx_clk_y", |
| "eth_rx_dv_y", |
| "eth_rxd0_y", |
| "eth_rxd1_y", |
| "eth_txen_y", |
| "eth_txd0_y", |
| "eth_txd1_y"; |
| function = "eth"; |
| }; |
| }; |
| |
| eth_rgmii_x_pins: eth-x-rgmii { |
| mux { |
| groups = "eth_mdio_x", |
| "eth_mdc_x", |
| "eth_rgmii_rx_clk_x", |
| "eth_rx_dv_x", |
| "eth_rxd0_x", |
| "eth_rxd1_x", |
| "eth_rxd2_rgmii", |
| "eth_rxd3_rgmii", |
| "eth_rgmii_tx_clk", |
| "eth_txen_x", |
| "eth_txd0_x", |
| "eth_txd1_x", |
| "eth_txd2_rgmii", |
| "eth_txd3_rgmii"; |
| function = "eth"; |
| }; |
| }; |
| |
| eth_rgmii_y_pins: eth-y-rgmii { |
| mux { |
| groups = "eth_mdio_y", |
| "eth_mdc_y", |
| "eth_rgmii_rx_clk_y", |
| "eth_rx_dv_y", |
| "eth_rxd0_y", |
| "eth_rxd1_y", |
| "eth_rxd2_rgmii", |
| "eth_rxd3_rgmii", |
| "eth_rgmii_tx_clk", |
| "eth_txen_y", |
| "eth_txd0_y", |
| "eth_txd1_y", |
| "eth_txd2_rgmii", |
| "eth_txd3_rgmii"; |
| function = "eth"; |
| }; |
| }; |
| |
| pdm_dclk_a14_pins: pdm_dclk_a14 { |
| mux { |
| groups = "pdm_dclk_a14"; |
| function = "pdm"; |
| }; |
| }; |
| |
| pdm_dclk_a19_pins: pdm_dclk_a19 { |
| mux { |
| groups = "pdm_dclk_a19"; |
| function = "pdm"; |
| }; |
| }; |
| |
| pdm_din0_pins: pdm_din0 { |
| mux { |
| groups = "pdm_din0"; |
| function = "pdm"; |
| }; |
| }; |
| |
| pdm_din1_pins: pdm_din1 { |
| mux { |
| groups = "pdm_din1"; |
| function = "pdm"; |
| }; |
| }; |
| |
| pdm_din2_pins: pdm_din2 { |
| mux { |
| groups = "pdm_din2"; |
| function = "pdm"; |
| }; |
| }; |
| |
| pdm_din3_pins: pdm_din3 { |
| mux { |
| groups = "pdm_din3"; |
| function = "pdm"; |
| }; |
| }; |
| |
| pwm_a_a_pins: pwm_a_a { |
| mux { |
| groups = "pwm_a_a"; |
| function = "pwm_a"; |
| }; |
| }; |
| |
| pwm_a_x18_pins: pwm_a_x18 { |
| mux { |
| groups = "pwm_a_x18"; |
| function = "pwm_a"; |
| }; |
| }; |
| |
| pwm_a_x20_pins: pwm_a_x20 { |
| mux { |
| groups = "pwm_a_x20"; |
| function = "pwm_a"; |
| }; |
| }; |
| |
| pwm_a_z_pins: pwm_a_z { |
| mux { |
| groups = "pwm_a_z"; |
| function = "pwm_a"; |
| }; |
| }; |
| |
| pwm_b_a_pins: pwm_b_a { |
| mux { |
| groups = "pwm_b_a"; |
| function = "pwm_b"; |
| }; |
| }; |
| |
| pwm_b_x_pins: pwm_b_x { |
| mux { |
| groups = "pwm_b_x"; |
| function = "pwm_b"; |
| }; |
| }; |
| |
| pwm_b_z_pins: pwm_b_z { |
| mux { |
| groups = "pwm_b_z"; |
| function = "pwm_b"; |
| }; |
| }; |
| |
| pwm_c_a_pins: pwm_c_a { |
| mux { |
| groups = "pwm_c_a"; |
| function = "pwm_c"; |
| }; |
| }; |
| |
| pwm_c_x10_pins: pwm_c_x10 { |
| mux { |
| groups = "pwm_c_x10"; |
| function = "pwm_c"; |
| }; |
| }; |
| |
| pwm_c_x17_pins: pwm_c_x17 { |
| mux { |
| groups = "pwm_c_x17"; |
| function = "pwm_c"; |
| }; |
| }; |
| |
| pwm_d_x11_pins: pwm_d_x11 { |
| mux { |
| groups = "pwm_d_x11"; |
| function = "pwm_d"; |
| }; |
| }; |
| |
| pwm_d_x16_pins: pwm_d_x16 { |
| mux { |
| groups = "pwm_d_x16"; |
| function = "pwm_d"; |
| }; |
| }; |
| |
| spdif_in_z_pins: spdif_in_z { |
| mux { |
| groups = "spdif_in_z"; |
| function = "spdif_in"; |
| }; |
| }; |
| |
| spdif_in_a1_pins: spdif_in_a1 { |
| mux { |
| groups = "spdif_in_a1"; |
| function = "spdif_in"; |
| }; |
| }; |
| |
| spdif_in_a7_pins: spdif_in_a7 { |
| mux { |
| groups = "spdif_in_a7"; |
| function = "spdif_in"; |
| }; |
| }; |
| |
| spdif_in_a19_pins: spdif_in_a19 { |
| mux { |
| groups = "spdif_in_a19"; |
| function = "spdif_in"; |
| }; |
| }; |
| |
| spdif_in_a20_pins: spdif_in_a20 { |
| mux { |
| groups = "spdif_in_a20"; |
| function = "spdif_in"; |
| }; |
| }; |
| |
| spdif_out_z_pins: spdif_out_z { |
| mux { |
| groups = "spdif_out_z"; |
| function = "spdif_out"; |
| }; |
| }; |
| |
| spdif_out_a1_pins: spdif_out_a1 { |
| mux { |
| groups = "spdif_out_a1"; |
| function = "spdif_out"; |
| }; |
| }; |
| |
| spdif_out_a11_pins: spdif_out_a11 { |
| mux { |
| groups = "spdif_out_a11"; |
| function = "spdif_out"; |
| }; |
| }; |
| |
| spdif_out_a19_pins: spdif_out_a19 { |
| mux { |
| groups = "spdif_out_a19"; |
| function = "spdif_out"; |
| }; |
| }; |
| |
| spdif_out_a20_pins: spdif_out_a20 { |
| mux { |
| groups = "spdif_out_a20"; |
| function = "spdif_out"; |
| }; |
| }; |
| |
| spi0_pins: spi0 { |
| mux { |
| groups = "spi0_miso", |
| "spi0_mosi", |
| "spi0_clk"; |
| function = "spi0"; |
| }; |
| }; |
| |
| spi0_ss0_pins: spi0_ss0 { |
| mux { |
| groups = "spi0_ss0"; |
| function = "spi0"; |
| }; |
| }; |
| |
| spi0_ss1_pins: spi0_ss1 { |
| mux { |
| groups = "spi0_ss1"; |
| function = "spi0"; |
| }; |
| }; |
| |
| spi0_ss2_pins: spi0_ss2 { |
| mux { |
| groups = "spi0_ss2"; |
| function = "spi0"; |
| }; |
| }; |
| |
| |
| spi1_a_pins: spi1_a { |
| mux { |
| groups = "spi1_miso_a", |
| "spi1_mosi_a", |
| "spi1_clk_a"; |
| function = "spi1"; |
| }; |
| }; |
| |
| spi1_ss0_a_pins: spi1_ss0_a { |
| mux { |
| groups = "spi1_ss0_a"; |
| function = "spi1"; |
| }; |
| }; |
| |
| spi1_ss1_pins: spi1_ss1 { |
| mux { |
| groups = "spi1_ss1"; |
| function = "spi1"; |
| }; |
| }; |
| |
| spi1_x_pins: spi1_x { |
| mux { |
| groups = "spi1_miso_x", |
| "spi1_mosi_x", |
| "spi1_clk_x"; |
| function = "spi1"; |
| }; |
| }; |
| |
| spi1_ss0_x_pins: spi1_ss0_x { |
| mux { |
| groups = "spi1_ss0_x"; |
| function = "spi1"; |
| }; |
| }; |
| |
| i2c0_pins: i2c0 { |
| mux { |
| groups = "i2c0_sck", |
| "i2c0_sda"; |
| function = "i2c0"; |
| }; |
| }; |
| |
| i2c1_z_pins: i2c1_z { |
| mux { |
| groups = "i2c1_sck_z", |
| "i2c1_sda_z"; |
| function = "i2c1"; |
| }; |
| }; |
| |
| i2c1_x_pins: i2c1_x { |
| mux { |
| groups = "i2c1_sck_x", |
| "i2c1_sda_x"; |
| function = "i2c1"; |
| }; |
| }; |
| |
| i2c2_x_pins: i2c2_x { |
| mux { |
| groups = "i2c2_sck_x", |
| "i2c2_sda_x"; |
| function = "i2c2"; |
| }; |
| }; |
| |
| i2c2_a_pins: i2c2_a { |
| mux { |
| groups = "i2c2_sck_a", |
| "i2c2_sda_a"; |
| function = "i2c2"; |
| }; |
| }; |
| |
| i2c3_a6_pins: i2c3_a6 { |
| mux { |
| groups = "i2c3_sda_a6", |
| "i2c3_sck_a7"; |
| function = "i2c3"; |
| }; |
| }; |
| |
| i2c3_a12_pins: i2c3_a12 { |
| mux { |
| groups = "i2c3_sda_a12", |
| "i2c3_sck_a13"; |
| function = "i2c3"; |
| }; |
| }; |
| |
| i2c3_a19_pins: i2c3_a19 { |
| mux { |
| groups = "i2c3_sda_a19", |
| "i2c3_sck_a20"; |
| function = "i2c3"; |
| }; |
| }; |
| |
| uart_a_pins: uart_a { |
| mux { |
| groups = "uart_tx_a", |
| "uart_rx_a"; |
| function = "uart_a"; |
| }; |
| }; |
| |
| uart_a_cts_rts_pins: uart_a_cts_rts { |
| mux { |
| groups = "uart_cts_a", |
| "uart_rts_a"; |
| function = "uart_a"; |
| }; |
| }; |
| |
| uart_b_x_pins: uart_b_x { |
| mux { |
| groups = "uart_tx_b_x", |
| "uart_rx_b_x"; |
| function = "uart_b"; |
| }; |
| }; |
| |
| uart_b_x_cts_rts_pins: uart_b_x_cts_rts { |
| mux { |
| groups = "uart_cts_b_x", |
| "uart_rts_b_x"; |
| function = "uart_b"; |
| }; |
| }; |
| |
| uart_b_z_pins: uart_b_z { |
| mux { |
| groups = "uart_tx_b_z", |
| "uart_rx_b_z"; |
| function = "uart_b"; |
| }; |
| }; |
| |
| uart_b_z_cts_rts_pins: uart_b_z_cts_rts { |
| mux { |
| groups = "uart_cts_b_z", |
| "uart_rts_b_z"; |
| function = "uart_b"; |
| }; |
| }; |
| |
| uart_ao_b_z_pins: uart_ao_b_z { |
| mux { |
| groups = "uart_ao_tx_b_z", |
| "uart_ao_rx_b_z"; |
| function = "uart_ao_b_z"; |
| }; |
| }; |
| |
| uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts { |
| mux { |
| groups = "uart_ao_cts_b_z", |
| "uart_ao_rts_b_z"; |
| function = "uart_ao_b_z"; |
| }; |
| }; |
| |
| mclk_b_pins: mclk_b { |
| mux { |
| groups = "mclk_b"; |
| function = "mclk_b"; |
| }; |
| }; |
| |
| mclk_c_pins: mclk_c { |
| mux { |
| groups = "mclk_c"; |
| function = "mclk_c"; |
| }; |
| }; |
| |
| tdma_sclk_pins: tdma_sclk { |
| mux { |
| groups = "tdma_sclk"; |
| function = "tdma"; |
| }; |
| }; |
| |
| tdma_sclk_slv_pins: tdma_sclk_slv { |
| mux { |
| groups = "tdma_sclk_slv"; |
| function = "tdma"; |
| }; |
| }; |
| |
| tdma_fs_pins: tdma_fs { |
| mux { |
| groups = "tdma_fs"; |
| function = "tdma"; |
| }; |
| }; |
| |
| tdma_fs_slv_pins: tdma_fs_slv { |
| mux { |
| groups = "tdma_fs_slv"; |
| function = "tdma"; |
| }; |
| }; |
| |
| tdma_din0_pins: tdma_din0 { |
| mux { |
| groups = "tdma_din0"; |
| function = "tdma"; |
| }; |
| }; |
| |
| tdma_dout0_x14_pins: tdma_dout0_x14 { |
| mux { |
| groups = "tdma_dout0_x14"; |
| function = "tdma"; |
| }; |
| }; |
| |
| tdma_dout0_x15_pins: tdma_dout0_x15 { |
| mux { |
| groups = "tdma_dout0_x15"; |
| function = "tdma"; |
| }; |
| }; |
| |
| tdma_dout1_pins: tdma_dout1 { |
| mux { |
| groups = "tdma_dout1"; |
| function = "tdma"; |
| }; |
| }; |
| |
| tdma_din1_pins: tdma_din1 { |
| mux { |
| groups = "tdma_din1"; |
| function = "tdma"; |
| }; |
| }; |
| |
| tdmb_sclk_pins: tdmb_sclk { |
| mux { |
| groups = "tdmb_sclk"; |
| function = "tdmb"; |
| }; |
| }; |
| |
| tdmb_sclk_slv_pins: tdmb_sclk_slv { |
| mux { |
| groups = "tdmb_sclk_slv"; |
| function = "tdmb"; |
| }; |
| }; |
| |
| tdmb_fs_pins: tdmb_fs { |
| mux { |
| groups = "tdmb_fs"; |
| function = "tdmb"; |
| }; |
| }; |
| |
| tdmb_fs_slv_pins: tdmb_fs_slv { |
| mux { |
| groups = "tdmb_fs_slv"; |
| function = "tdmb"; |
| }; |
| }; |
| |
| tdmb_din0_pins: tdmb_din0 { |
| mux { |
| groups = "tdmb_din0"; |
| function = "tdmb"; |
| }; |
| }; |
| |
| tdmb_dout0_pins: tdmb_dout0 { |
| mux { |
| groups = "tdmb_dout0"; |
| function = "tdmb"; |
| }; |
| }; |
| |
| tdmb_din1_pins: tdmb_din1 { |
| mux { |
| groups = "tdmb_din1"; |
| function = "tdmb"; |
| }; |
| }; |
| |
| tdmb_dout1_pins: tdmb_dout1 { |
| mux { |
| groups = "tdmb_dout1"; |
| function = "tdmb"; |
| }; |
| }; |
| |
| tdmb_din2_pins: tdmb_din2 { |
| mux { |
| groups = "tdmb_din2"; |
| function = "tdmb"; |
| }; |
| }; |
| |
| tdmb_dout2_pins: tdmb_dout2 { |
| mux { |
| groups = "tdmb_dout2"; |
| function = "tdmb"; |
| }; |
| }; |
| |
| tdmb_din3_pins: tdmb_din3 { |
| mux { |
| groups = "tdmb_din3"; |
| function = "tdmb"; |
| }; |
| }; |
| |
| tdmb_dout3_pins: tdmb_dout3 { |
| mux { |
| groups = "tdmb_dout3"; |
| function = "tdmb"; |
| }; |
| }; |
| |
| tdmc_sclk_pins: tdmc_sclk { |
| mux { |
| groups = "tdmc_sclk"; |
| function = "tdmc"; |
| }; |
| }; |
| |
| tdmc_sclk_slv_pins: tdmc_sclk_slv { |
| mux { |
| groups = "tdmc_sclk_slv"; |
| function = "tdmc"; |
| }; |
| }; |
| |
| tdmc_fs_pins: tdmc_fs { |
| mux { |
| groups = "tdmc_fs"; |
| function = "tdmc"; |
| }; |
| }; |
| |
| tdmc_fs_slv_pins: tdmc_fs_slv { |
| mux { |
| groups = "tdmc_fs_slv"; |
| function = "tdmc"; |
| }; |
| }; |
| |
| tdmc_din0_pins: tdmc_din0 { |
| mux { |
| groups = "tdmc_din0"; |
| function = "tdmc"; |
| }; |
| }; |
| |
| tdmc_dout0_pins: tdmc_dout0 { |
| mux { |
| groups = "tdmc_dout0"; |
| function = "tdmc"; |
| }; |
| }; |
| |
| tdmc_din1_pins: tdmc_din1 { |
| mux { |
| groups = "tdmc_din1"; |
| function = "tdmc"; |
| }; |
| }; |
| |
| tdmc_dout1_pins: tdmc_dout1 { |
| mux { |
| groups = "tdmc_dout1"; |
| function = "tdmc"; |
| }; |
| }; |
| |
| tdmc_din2_pins: tdmc_din2 { |
| mux { |
| groups = "tdmc_din2"; |
| function = "tdmc"; |
| }; |
| }; |
| |
| tdmc_dout2_pins: tdmc_dout2 { |
| mux { |
| groups = "tdmc_dout2"; |
| function = "tdmc"; |
| }; |
| }; |
| |
| tdmc_din3_pins: tdmc_din3 { |
| mux { |
| groups = "tdmc_din3"; |
| function = "tdmc"; |
| }; |
| }; |
| |
| tdmc_dout3_pins: tdmc_dout3 { |
| mux { |
| groups = "tdmc_dout3"; |
| function = "tdmc"; |
| }; |
| }; |
| }; |
| }; |
| |
| sram: sram@fffc0000 { |
| compatible = "amlogic,meson-axg-sram", "mmio-sram"; |
| reg = <0x0 0xfffc0000 0x0 0x20000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x0 0xfffc0000 0x20000>; |
| |
| cpu_scp_lpri: scp-shmem@0 { |
| compatible = "amlogic,meson-axg-scp-shmem"; |
| reg = <0x13000 0x400>; |
| }; |
| |
| cpu_scp_hpri: scp-shmem@200 { |
| compatible = "amlogic,meson-axg-scp-shmem"; |
| reg = <0x13400 0x400>; |
| }; |
| }; |
| |
| aobus: bus@ff800000 { |
| compatible = "simple-bus"; |
| reg = <0x0 0xff800000 0x0 0x100000>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; |
| |
| sysctrl_AO: sys-ctrl@0 { |
| compatible = "amlogic,meson-axg-ao-sysctrl", "syscon", "simple-mfd"; |
| reg = <0x0 0x0 0x0 0x100>; |
| |
| clkc_AO: clock-controller { |
| compatible = "amlogic,meson-axg-aoclkc"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| }; |
| |
| pinctrl_aobus: pinctrl@14 { |
| compatible = "amlogic,meson-axg-aobus-pinctrl"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| gpio_ao: bank@14 { |
| reg = <0x0 0x00014 0x0 0x8>, |
| <0x0 0x0002c 0x0 0x4>, |
| <0x0 0x00024 0x0 0x8>; |
| reg-names = "mux", "pull", "gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pinctrl_aobus 0 0 15>; |
| }; |
| |
| i2c_ao_sck_4_pins: i2c_ao_sck_4 { |
| mux { |
| groups = "i2c_ao_sck_4"; |
| function = "i2c_ao"; |
| }; |
| }; |
| |
| i2c_ao_sck_8_pins: i2c_ao_sck_8 { |
| mux { |
| groups = "i2c_ao_sck_8"; |
| function = "i2c_ao"; |
| }; |
| }; |
| |
| i2c_ao_sck_10_pins: i2c_ao_sck_10 { |
| mux { |
| groups = "i2c_ao_sck_10"; |
| function = "i2c_ao"; |
| }; |
| }; |
| |
| i2c_ao_sda_5_pins: i2c_ao_sda_5 { |
| mux { |
| groups = "i2c_ao_sda_5"; |
| function = "i2c_ao"; |
| }; |
| }; |
| |
| i2c_ao_sda_9_pins: i2c_ao_sda_9 { |
| mux { |
| groups = "i2c_ao_sda_9"; |
| function = "i2c_ao"; |
| }; |
| }; |
| |
| i2c_ao_sda_11_pins: i2c_ao_sda_11 { |
| mux { |
| groups = "i2c_ao_sda_11"; |
| function = "i2c_ao"; |
| }; |
| }; |
| |
| remote_input_ao_pins: remote_input_ao { |
| mux { |
| groups = "remote_input_ao"; |
| function = "remote_input_ao"; |
| }; |
| }; |
| |
| uart_ao_a_pins: uart_ao_a { |
| mux { |
| groups = "uart_ao_tx_a", |
| "uart_ao_rx_a"; |
| function = "uart_ao_a"; |
| }; |
| }; |
| |
| uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts { |
| mux { |
| groups = "uart_ao_cts_a", |
| "uart_ao_rts_a"; |
| function = "uart_ao_a"; |
| }; |
| }; |
| |
| uart_ao_b_pins: uart_ao_b { |
| mux { |
| groups = "uart_ao_tx_b", |
| "uart_ao_rx_b"; |
| function = "uart_ao_b"; |
| }; |
| }; |
| |
| uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts { |
| mux { |
| groups = "uart_ao_cts_b", |
| "uart_ao_rts_b"; |
| function = "uart_ao_b"; |
| }; |
| }; |
| }; |
| |
| sec_AO: ao-secure@140 { |
| compatible = "amlogic,meson-gx-ao-secure", "syscon"; |
| reg = <0x0 0x140 0x0 0x140>; |
| amlogic,has-chip-id; |
| }; |
| |
| pwm_AO_ab: pwm@7000 { |
| compatible = "amlogic,meson-axg-ao-pwm"; |
| reg = <0x0 0x07000 0x0 0x20>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm_AO_cd: pwm@2000 { |
| compatible = "amlogic,meson-axg-ao-pwm"; |
| reg = <0x0 0x02000 0x0 0x20>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| i2c_AO: i2c@5000 { |
| compatible = "amlogic,meson-axg-i2c"; |
| reg = <0x0 0x05000 0x0 0x20>; |
| interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&clkc CLKID_AO_I2C>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| uart_AO: serial@3000 { |
| compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; |
| reg = <0x0 0x3000 0x0 0x18>; |
| interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>; |
| clock-names = "xtal", "pclk", "baud"; |
| status = "disabled"; |
| }; |
| |
| uart_AO_B: serial@4000 { |
| compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; |
| reg = <0x0 0x4000 0x0 0x18>; |
| interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; |
| clock-names = "xtal", "pclk", "baud"; |
| status = "disabled"; |
| }; |
| |
| ir: ir@8000 { |
| compatible = "amlogic,meson-gxbb-ir"; |
| reg = <0x0 0x8000 0x0 0x20>; |
| interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| }; |
| |
| saradc: adc@9000 { |
| compatible = "amlogic,meson-axg-saradc", |
| "amlogic,meson-saradc"; |
| reg = <0x0 0x9000 0x0 0x38>; |
| #io-channel-cells = <1>; |
| interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&xtal>, |
| <&clkc_AO CLKID_AO_SAR_ADC>, |
| <&clkc_AO CLKID_AO_SAR_ADC_CLK>, |
| <&clkc_AO CLKID_AO_SAR_ADC_SEL>; |
| clock-names = "clkin", "core", "adc_clk", "adc_sel"; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| }; |
