| /* | 
 |  *   | 
 |  *  Copyright (C) 2002 Intersil Americas Inc. | 
 |  *            (C) 2003,2004 Aurelien Alleaume <slts@free.fr> | 
 |  *            (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> | 
 |  *            (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or modify | 
 |  *  it under the terms of the GNU General Public License as published by | 
 |  *  the Free Software Foundation; either version 2 of the License | 
 |  * | 
 |  *  This program is distributed in the hope that it will be useful, | 
 |  *  but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  *  GNU General Public License for more details. | 
 |  * | 
 |  *  You should have received a copy of the GNU General Public License | 
 |  *  along with this program; if not, write to the Free Software | 
 |  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/version.h> | 
 | #include <linux/module.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/if_arp.h> | 
 | #include <linux/pci.h> | 
 |  | 
 | #include <asm/uaccess.h> | 
 |  | 
 | #include "prismcompat.h" | 
 | #include "isl_ioctl.h" | 
 | #include "islpci_mgt.h" | 
 | #include "isl_oid.h"		/* additional types and defs for isl38xx fw */ | 
 | #include "oid_mgt.h" | 
 |  | 
 | #include <net/iw_handler.h>	/* New driver API */ | 
 |  | 
 |  | 
 | static void prism54_wpa_ie_add(islpci_private *priv, u8 *bssid, | 
 | 				u8 *wpa_ie, size_t wpa_ie_len); | 
 | static size_t prism54_wpa_ie_get(islpci_private *priv, u8 *bssid, u8 *wpa_ie); | 
 | static int prism54_set_wpa(struct net_device *, struct iw_request_info *, | 
 | 				__u32 *, char *); | 
 |  | 
 |  | 
 | /** | 
 |  * prism54_mib_mode_helper - MIB change mode helper function | 
 |  * @mib: the &struct islpci_mib object to modify | 
 |  * @iw_mode: new mode (%IW_MODE_*) | 
 |  *  | 
 |  *  This is a helper function, hence it does not lock. Make sure | 
 |  *  caller deals with locking *if* necessary. This function sets the  | 
 |  *  mode-dependent mib values and does the mapping of the Linux  | 
 |  *  Wireless API modes to Device firmware modes. It also checks for  | 
 |  *  correct valid Linux wireless modes.  | 
 |  */ | 
 | static int | 
 | prism54_mib_mode_helper(islpci_private *priv, u32 iw_mode) | 
 | { | 
 | 	u32 config = INL_CONFIG_MANUALRUN; | 
 | 	u32 mode, bsstype; | 
 |  | 
 | 	/* For now, just catch early the Repeater and Secondary modes here */ | 
 | 	if (iw_mode == IW_MODE_REPEAT || iw_mode == IW_MODE_SECOND) { | 
 | 		printk(KERN_DEBUG | 
 | 		       "%s(): Sorry, Repeater mode and Secondary mode " | 
 | 		       "are not yet supported by this driver.\n", __FUNCTION__); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	priv->iw_mode = iw_mode; | 
 |  | 
 | 	switch (iw_mode) { | 
 | 	case IW_MODE_AUTO: | 
 | 		mode = INL_MODE_CLIENT; | 
 | 		bsstype = DOT11_BSSTYPE_ANY; | 
 | 		break; | 
 | 	case IW_MODE_ADHOC: | 
 | 		mode = INL_MODE_CLIENT; | 
 | 		bsstype = DOT11_BSSTYPE_IBSS; | 
 | 		break; | 
 | 	case IW_MODE_INFRA: | 
 | 		mode = INL_MODE_CLIENT; | 
 | 		bsstype = DOT11_BSSTYPE_INFRA; | 
 | 		break; | 
 | 	case IW_MODE_MASTER: | 
 | 		mode = INL_MODE_AP; | 
 | 		bsstype = DOT11_BSSTYPE_INFRA; | 
 | 		break; | 
 | 	case IW_MODE_MONITOR: | 
 | 		mode = INL_MODE_PROMISCUOUS; | 
 | 		bsstype = DOT11_BSSTYPE_ANY; | 
 | 		config |= INL_CONFIG_RXANNEX; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (init_wds) | 
 | 		config |= INL_CONFIG_WDS; | 
 | 	mgt_set(priv, DOT11_OID_BSSTYPE, &bsstype); | 
 | 	mgt_set(priv, OID_INL_CONFIG, &config); | 
 | 	mgt_set(priv, OID_INL_MODE, &mode); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * prism54_mib_init - fill MIB cache with defaults | 
 |  * | 
 |  *  this function initializes the struct given as @mib with defaults, | 
 |  *  of which many are retrieved from the global module parameter | 
 |  *  variables.   | 
 |  */ | 
 |  | 
 | void | 
 | prism54_mib_init(islpci_private *priv) | 
 | { | 
 | 	u32 channel, authen, wep, filter, dot1x, mlme, conformance, power, mode; | 
 | 	struct obj_buffer psm_buffer = { | 
 | 		.size = PSM_BUFFER_SIZE, | 
 | 		.addr = priv->device_psm_buffer | 
 | 	}; | 
 |  | 
 | 	channel = CARD_DEFAULT_CHANNEL; | 
 | 	authen = CARD_DEFAULT_AUTHEN; | 
 | 	wep = CARD_DEFAULT_WEP; | 
 | 	filter = CARD_DEFAULT_FILTER; /* (0) Do not filter un-encrypted data */ | 
 | 	dot1x = CARD_DEFAULT_DOT1X;  | 
 | 	mlme = CARD_DEFAULT_MLME_MODE; | 
 | 	conformance = CARD_DEFAULT_CONFORMANCE; | 
 | 	power = 127; | 
 | 	mode = CARD_DEFAULT_IW_MODE; | 
 |  | 
 | 	mgt_set(priv, DOT11_OID_CHANNEL, &channel); | 
 | 	mgt_set(priv, DOT11_OID_AUTHENABLE, &authen); | 
 | 	mgt_set(priv, DOT11_OID_PRIVACYINVOKED, &wep); | 
 | 	mgt_set(priv, DOT11_OID_PSMBUFFER, &psm_buffer); | 
 | 	mgt_set(priv, DOT11_OID_EXUNENCRYPTED, &filter); | 
 | 	mgt_set(priv, DOT11_OID_DOT1XENABLE, &dot1x); | 
 | 	mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &mlme); | 
 | 	mgt_set(priv, OID_INL_DOT11D_CONFORMANCE, &conformance); | 
 | 	mgt_set(priv, OID_INL_OUTPUTPOWER, &power); | 
 |  | 
 | 	/* This sets all of the mode-dependent values */ | 
 | 	prism54_mib_mode_helper(priv, mode); | 
 | } | 
 |  | 
 | /* this will be executed outside of atomic context thanks to | 
 |  * schedule_work(), thus we can as well use sleeping semaphore | 
 |  * locking */ | 
 | void | 
 | prism54_update_stats(islpci_private *priv) | 
 | { | 
 | 	char *data; | 
 | 	int j; | 
 | 	struct obj_bss bss, *bss2; | 
 | 	union oid_res_t r; | 
 |  | 
 | 	if (down_interruptible(&priv->stats_sem)) | 
 | 		return; | 
 |  | 
 | /* Noise floor. | 
 |  * I'm not sure if the unit is dBm. | 
 |  * Note : If we are not connected, this value seems to be irrelevant. */ | 
 |  | 
 | 	mgt_get_request(priv, DOT11_OID_NOISEFLOOR, 0, NULL, &r); | 
 | 	priv->local_iwstatistics.qual.noise = r.u; | 
 |  | 
 | /* Get the rssi of the link. To do this we need to retrieve a bss. */ | 
 |  | 
 | 	/* First get the MAC address of the AP we are associated with. */ | 
 | 	mgt_get_request(priv, DOT11_OID_BSSID, 0, NULL, &r); | 
 | 	data = r.ptr; | 
 |  | 
 | 	/* copy this MAC to the bss */ | 
 | 	memcpy(bss.address, data, 6); | 
 | 	kfree(data); | 
 |  | 
 | 	/* now ask for the corresponding bss */ | 
 | 	j = mgt_get_request(priv, DOT11_OID_BSSFIND, 0, (void *) &bss, &r); | 
 | 	bss2 = r.ptr; | 
 | 	/* report the rssi and use it to calculate | 
 | 	 *  link quality through a signal-noise | 
 | 	 *  ratio */ | 
 | 	priv->local_iwstatistics.qual.level = bss2->rssi; | 
 | 	priv->local_iwstatistics.qual.qual = | 
 | 	    bss2->rssi - priv->iwstatistics.qual.noise; | 
 |  | 
 | 	kfree(bss2); | 
 |  | 
 | 	/* report that the stats are new */ | 
 | 	priv->local_iwstatistics.qual.updated = 0x7; | 
 |  | 
 | /* Rx : unable to decrypt the MPDU */ | 
 | 	mgt_get_request(priv, DOT11_OID_PRIVRXFAILED, 0, NULL, &r); | 
 | 	priv->local_iwstatistics.discard.code = r.u; | 
 |  | 
 | /* Tx : Max MAC retries num reached */ | 
 | 	mgt_get_request(priv, DOT11_OID_MPDUTXFAILED, 0, NULL, &r); | 
 | 	priv->local_iwstatistics.discard.retries = r.u; | 
 |  | 
 | 	up(&priv->stats_sem); | 
 |  | 
 | 	return; | 
 | } | 
 |  | 
 | struct iw_statistics * | 
 | prism54_get_wireless_stats(struct net_device *ndev) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 |  | 
 | 	/* If the stats are being updated return old data */ | 
 | 	if (down_trylock(&priv->stats_sem) == 0) { | 
 | 		memcpy(&priv->iwstatistics, &priv->local_iwstatistics, | 
 | 		       sizeof (struct iw_statistics)); | 
 | 		/* They won't be marked updated for the next time */ | 
 | 		priv->local_iwstatistics.qual.updated = 0; | 
 | 		up(&priv->stats_sem); | 
 | 	} else | 
 | 		priv->iwstatistics.qual.updated = 0; | 
 |  | 
 | 	/* Update our wireless stats, but do not schedule to often  | 
 | 	 * (max 1 HZ) */ | 
 | 	if ((priv->stats_timestamp == 0) || | 
 | 	    time_after(jiffies, priv->stats_timestamp + 1 * HZ)) { | 
 | 		schedule_work(&priv->stats_work); | 
 | 		priv->stats_timestamp = jiffies; | 
 | 	} | 
 |  | 
 | 	return &priv->iwstatistics; | 
 | } | 
 |  | 
 | static int | 
 | prism54_commit(struct net_device *ndev, struct iw_request_info *info, | 
 | 	       char *cwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 |  | 
 | 	/* simply re-set the last set SSID, this should commit most stuff */ | 
 |  | 
 | 	/* Commit in Monitor mode is not necessary, also setting essid | 
 | 	 * in Monitor mode does not make sense and isn't allowed for this | 
 | 	 * device's firmware */ | 
 | 	if (priv->iw_mode != IW_MODE_MONITOR) | 
 | 		return mgt_set_request(priv, DOT11_OID_SSID, 0, NULL); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | prism54_get_name(struct net_device *ndev, struct iw_request_info *info, | 
 | 		 char *cwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	char *capabilities; | 
 | 	union oid_res_t r; | 
 | 	int rvalue; | 
 |  | 
 | 	if (islpci_get_state(priv) < PRV_STATE_INIT) { | 
 | 		strncpy(cwrq, "NOT READY!", IFNAMSIZ); | 
 | 		return 0; | 
 | 	} | 
 | 	rvalue = mgt_get_request(priv, OID_INL_PHYCAPABILITIES, 0, NULL, &r); | 
 |  | 
 | 	switch (r.u) { | 
 | 	case INL_PHYCAP_5000MHZ: | 
 | 		capabilities = "IEEE 802.11a/b/g"; | 
 | 		break; | 
 | 	case INL_PHYCAP_FAA: | 
 | 		capabilities = "IEEE 802.11b/g - FAA Support"; | 
 | 		break; | 
 | 	case INL_PHYCAP_2400MHZ: | 
 | 	default: | 
 | 		capabilities = "IEEE 802.11b/g";	/* Default */ | 
 | 		break; | 
 | 	} | 
 | 	strncpy(cwrq, capabilities, IFNAMSIZ); | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | static int | 
 | prism54_set_freq(struct net_device *ndev, struct iw_request_info *info, | 
 | 		 struct iw_freq *fwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	int rvalue; | 
 | 	u32 c; | 
 |  | 
 | 	if (fwrq->m < 1000) | 
 | 		/* we have a channel number */ | 
 | 		c = fwrq->m; | 
 | 	else | 
 | 		c = (fwrq->e == 1) ? channel_of_freq(fwrq->m / 100000) : 0; | 
 |  | 
 | 	rvalue = c ? mgt_set_request(priv, DOT11_OID_CHANNEL, 0, &c) : -EINVAL; | 
 |  | 
 | 	/* Call commit handler */ | 
 | 	return (rvalue ? rvalue : -EINPROGRESS); | 
 | } | 
 |  | 
 | static int | 
 | prism54_get_freq(struct net_device *ndev, struct iw_request_info *info, | 
 | 		 struct iw_freq *fwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	union oid_res_t r; | 
 | 	int rvalue; | 
 |  | 
 | 	rvalue = mgt_get_request(priv, DOT11_OID_CHANNEL, 0, NULL, &r); | 
 | 	fwrq->i = r.u; | 
 | 	rvalue |= mgt_get_request(priv, DOT11_OID_FREQUENCY, 0, NULL, &r); | 
 | 	fwrq->m = r.u; | 
 | 	fwrq->e = 3; | 
 |  | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | static int | 
 | prism54_set_mode(struct net_device *ndev, struct iw_request_info *info, | 
 | 		 __u32 * uwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	u32 mlmeautolevel = CARD_DEFAULT_MLME_MODE; | 
 |  | 
 | 	/* Let's see if the user passed a valid Linux Wireless mode */ | 
 | 	if (*uwrq > IW_MODE_MONITOR || *uwrq < IW_MODE_AUTO) { | 
 | 		printk(KERN_DEBUG | 
 | 		       "%s: %s() You passed a non-valid init_mode.\n", | 
 | 		       priv->ndev->name, __FUNCTION__); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	down_write(&priv->mib_sem); | 
 |  | 
 | 	if (prism54_mib_mode_helper(priv, *uwrq)) { | 
 | 		up_write(&priv->mib_sem); | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 |  | 
 | 	/* the ACL code needs an intermediate mlmeautolevel. The wpa stuff an | 
 | 	 * extended one. | 
 | 	 */ | 
 | 	if ((*uwrq == IW_MODE_MASTER) && (priv->acl.policy != MAC_POLICY_OPEN)) | 
 | 		mlmeautolevel = DOT11_MLME_INTERMEDIATE; | 
 | 	if (priv->wpa) | 
 | 		mlmeautolevel = DOT11_MLME_EXTENDED; | 
 |  | 
 | 	mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &mlmeautolevel); | 
 |  | 
 | 	if (mgt_commit(priv)) { | 
 | 		up_write(&priv->mib_sem); | 
 | 		return -EIO; | 
 | 	} | 
 | 	priv->ndev->type = (priv->iw_mode == IW_MODE_MONITOR) | 
 | 	    ? priv->monitor_type : ARPHRD_ETHER; | 
 | 	up_write(&priv->mib_sem); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Use mib cache */ | 
 | static int | 
 | prism54_get_mode(struct net_device *ndev, struct iw_request_info *info, | 
 | 		 __u32 * uwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 |  | 
 | 	BUG_ON((priv->iw_mode < IW_MODE_AUTO) || (priv->iw_mode > | 
 | 						  IW_MODE_MONITOR)); | 
 | 	*uwrq = priv->iw_mode; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* we use DOT11_OID_EDTHRESHOLD. From what I guess the card will not try to | 
 |  * emit data if (sensitivity > rssi - noise) (in dBm). | 
 |  * prism54_set_sens does not seem to work. | 
 |  */ | 
 |  | 
 | static int | 
 | prism54_set_sens(struct net_device *ndev, struct iw_request_info *info, | 
 | 		 struct iw_param *vwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	u32 sens; | 
 |  | 
 | 	/* by default  the card sets this to 20. */ | 
 | 	sens = vwrq->disabled ? 20 : vwrq->value; | 
 |  | 
 | 	return mgt_set_request(priv, DOT11_OID_EDTHRESHOLD, 0, &sens); | 
 | } | 
 |  | 
 | static int | 
 | prism54_get_sens(struct net_device *ndev, struct iw_request_info *info, | 
 | 		 struct iw_param *vwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	union oid_res_t r; | 
 | 	int rvalue; | 
 |  | 
 | 	rvalue = mgt_get_request(priv, DOT11_OID_EDTHRESHOLD, 0, NULL, &r); | 
 |  | 
 | 	vwrq->value = r.u; | 
 | 	vwrq->disabled = (vwrq->value == 0); | 
 | 	vwrq->fixed = 1; | 
 |  | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | static int | 
 | prism54_get_range(struct net_device *ndev, struct iw_request_info *info, | 
 | 		  struct iw_point *dwrq, char *extra) | 
 | { | 
 | 	struct iw_range *range = (struct iw_range *) extra; | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	u8 *data; | 
 | 	int i, m, rvalue; | 
 | 	struct obj_frequencies *freq; | 
 | 	union oid_res_t r; | 
 |  | 
 | 	memset(range, 0, sizeof (struct iw_range)); | 
 | 	dwrq->length = sizeof (struct iw_range); | 
 |  | 
 | 	/* set the wireless extension version number */ | 
 | 	range->we_version_source = SUPPORTED_WIRELESS_EXT; | 
 | 	range->we_version_compiled = WIRELESS_EXT; | 
 |  | 
 | 	/* Now the encoding capabilities */ | 
 | 	range->num_encoding_sizes = 3; | 
 | 	/* 64(40) bits WEP */ | 
 | 	range->encoding_size[0] = 5; | 
 | 	/* 128(104) bits WEP */ | 
 | 	range->encoding_size[1] = 13; | 
 | 	/* 256 bits for WPA-PSK */ | 
 | 	range->encoding_size[2] = 32; | 
 | 	/* 4 keys are allowed */ | 
 | 	range->max_encoding_tokens = 4; | 
 |  | 
 | 	/* we don't know the quality range... */ | 
 | 	range->max_qual.level = 0; | 
 | 	range->max_qual.noise = 0; | 
 | 	range->max_qual.qual = 0; | 
 | 	/* these value describe an average quality. Needs more tweaking... */ | 
 | 	range->avg_qual.level = -80;	/* -80 dBm */ | 
 | 	range->avg_qual.noise = 0;	/* don't know what to put here */ | 
 | 	range->avg_qual.qual = 0; | 
 |  | 
 | 	range->sensitivity = 200; | 
 |  | 
 | 	/* retry limit capabilities */ | 
 | 	range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME; | 
 | 	range->retry_flags = IW_RETRY_LIMIT; | 
 | 	range->r_time_flags = IW_RETRY_LIFETIME; | 
 |  | 
 | 	/* I don't know the range. Put stupid things here */ | 
 | 	range->min_retry = 1; | 
 | 	range->max_retry = 65535; | 
 | 	range->min_r_time = 1024; | 
 | 	range->max_r_time = 65535 * 1024; | 
 |  | 
 | 	/* txpower is supported in dBm's */ | 
 | 	range->txpower_capa = IW_TXPOW_DBM; | 
 |  | 
 | #if WIRELESS_EXT > 16 | 
 | 	/* Event capability (kernel + driver) */ | 
 | 	range->event_capa[0] = (IW_EVENT_CAPA_K_0 | | 
 | 	IW_EVENT_CAPA_MASK(SIOCGIWTHRSPY) | | 
 | 	IW_EVENT_CAPA_MASK(SIOCGIWAP)); | 
 | 	range->event_capa[1] = IW_EVENT_CAPA_K_1; | 
 | 	range->event_capa[4] = IW_EVENT_CAPA_MASK(IWEVCUSTOM); | 
 | #endif /* WIRELESS_EXT > 16 */ | 
 |  | 
 | 	if (islpci_get_state(priv) < PRV_STATE_INIT) | 
 | 		return 0; | 
 |  | 
 | 	/* Request the device for the supported frequencies | 
 | 	 * not really relevant since some devices will report the 5 GHz band | 
 | 	 * frequencies even if they don't support them. | 
 | 	 */ | 
 | 	rvalue = | 
 | 	    mgt_get_request(priv, DOT11_OID_SUPPORTEDFREQUENCIES, 0, NULL, &r); | 
 | 	freq = r.ptr; | 
 |  | 
 | 	range->num_channels = freq->nr; | 
 | 	range->num_frequency = freq->nr; | 
 |  | 
 | 	m = min(IW_MAX_FREQUENCIES, (int) freq->nr); | 
 | 	for (i = 0; i < m; i++) { | 
 | 		range->freq[i].m = freq->mhz[i]; | 
 | 		range->freq[i].e = 6; | 
 | 		range->freq[i].i = channel_of_freq(freq->mhz[i]); | 
 | 	} | 
 | 	kfree(freq); | 
 |  | 
 | 	rvalue |= mgt_get_request(priv, DOT11_OID_SUPPORTEDRATES, 0, NULL, &r); | 
 | 	data = r.ptr; | 
 |  | 
 | 	/* We got an array of char. It is NULL terminated. */ | 
 | 	i = 0; | 
 | 	while ((i < IW_MAX_BITRATES) && (*data != 0)) { | 
 | 		/*       the result must be in bps. The card gives us 500Kbps */ | 
 | 		range->bitrate[i] = *data * 500000; | 
 | 		i++; | 
 | 		data++; | 
 | 	} | 
 | 	range->num_bitrates = i; | 
 | 	kfree(r.ptr); | 
 |  | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | /* Set AP address*/ | 
 |  | 
 | static int | 
 | prism54_set_wap(struct net_device *ndev, struct iw_request_info *info, | 
 | 		struct sockaddr *awrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	char bssid[6]; | 
 | 	int rvalue; | 
 |  | 
 | 	if (awrq->sa_family != ARPHRD_ETHER) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* prepare the structure for the set object */ | 
 | 	memcpy(&bssid[0], awrq->sa_data, 6); | 
 |  | 
 | 	/* set the bssid -- does this make sense when in AP mode? */ | 
 | 	rvalue = mgt_set_request(priv, DOT11_OID_BSSID, 0, &bssid); | 
 |  | 
 | 	return (rvalue ? rvalue : -EINPROGRESS);	/* Call commit handler */ | 
 | } | 
 |  | 
 | /* get AP address*/ | 
 |  | 
 | static int | 
 | prism54_get_wap(struct net_device *ndev, struct iw_request_info *info, | 
 | 		struct sockaddr *awrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	union oid_res_t r; | 
 | 	int rvalue; | 
 |  | 
 | 	rvalue = mgt_get_request(priv, DOT11_OID_BSSID, 0, NULL, &r); | 
 | 	memcpy(awrq->sa_data, r.ptr, 6); | 
 | 	awrq->sa_family = ARPHRD_ETHER; | 
 | 	kfree(r.ptr); | 
 |  | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | static int | 
 | prism54_set_scan(struct net_device *dev, struct iw_request_info *info, | 
 | 		 struct iw_param *vwrq, char *extra) | 
 | { | 
 | 	/* hehe the device does this automagicaly */ | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* a little helper that will translate our data into a card independent | 
 |  * format that the Wireless Tools will understand. This was inspired by | 
 |  * the "Aironet driver for 4500 and 4800 series cards" (GPL) | 
 |  */ | 
 |  | 
 | static char * | 
 | prism54_translate_bss(struct net_device *ndev, char *current_ev, | 
 | 		      char *end_buf, struct obj_bss *bss, char noise) | 
 | { | 
 | 	struct iw_event iwe;	/* Temporary buffer */ | 
 | 	short cap; | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 |  | 
 | 	/* The first entry must be the MAC address */ | 
 | 	memcpy(iwe.u.ap_addr.sa_data, bss->address, 6); | 
 | 	iwe.u.ap_addr.sa_family = ARPHRD_ETHER; | 
 | 	iwe.cmd = SIOCGIWAP; | 
 | 	current_ev = | 
 | 	    iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); | 
 |  | 
 | 	/* The following entries will be displayed in the same order we give them */ | 
 |  | 
 | 	/* The ESSID. */ | 
 | 	iwe.u.data.length = bss->ssid.length; | 
 | 	iwe.u.data.flags = 1; | 
 | 	iwe.cmd = SIOCGIWESSID; | 
 | 	current_ev = iwe_stream_add_point(current_ev, end_buf, | 
 | 					  &iwe, bss->ssid.octets); | 
 |  | 
 | 	/* Capabilities */ | 
 | #define CAP_ESS 0x01 | 
 | #define CAP_IBSS 0x02 | 
 | #define CAP_CRYPT 0x10 | 
 |  | 
 | 	/* Mode */ | 
 | 	cap = bss->capinfo; | 
 | 	iwe.u.mode = 0; | 
 | 	if (cap & CAP_ESS) | 
 | 		iwe.u.mode = IW_MODE_MASTER; | 
 | 	else if (cap & CAP_IBSS) | 
 | 		iwe.u.mode = IW_MODE_ADHOC; | 
 | 	iwe.cmd = SIOCGIWMODE; | 
 | 	if (iwe.u.mode) | 
 | 		current_ev = | 
 | 		    iwe_stream_add_event(current_ev, end_buf, &iwe, | 
 | 					 IW_EV_UINT_LEN); | 
 |  | 
 | 	/* Encryption capability */ | 
 | 	if (cap & CAP_CRYPT) | 
 | 		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; | 
 | 	else | 
 | 		iwe.u.data.flags = IW_ENCODE_DISABLED; | 
 | 	iwe.u.data.length = 0; | 
 | 	iwe.cmd = SIOCGIWENCODE; | 
 | 	current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, NULL); | 
 |  | 
 | 	/* Add frequency. (short) bss->channel is the frequency in MHz */ | 
 | 	iwe.u.freq.m = bss->channel; | 
 | 	iwe.u.freq.e = 6; | 
 | 	iwe.cmd = SIOCGIWFREQ; | 
 | 	current_ev = | 
 | 	    iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); | 
 |  | 
 | 	/* Add quality statistics */ | 
 | 	iwe.u.qual.level = bss->rssi; | 
 | 	iwe.u.qual.noise = noise; | 
 | 	/* do a simple SNR for quality */ | 
 | 	iwe.u.qual.qual = bss->rssi - noise; | 
 | 	iwe.cmd = IWEVQUAL; | 
 | 	current_ev = | 
 | 	    iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); | 
 |  | 
 | 	if (priv->wpa) { | 
 | 		u8 wpa_ie[MAX_WPA_IE_LEN]; | 
 | 		char *buf, *p; | 
 | 		size_t wpa_ie_len; | 
 | 		int i; | 
 |  | 
 | 		wpa_ie_len = prism54_wpa_ie_get(priv, bss->address, wpa_ie); | 
 | 		if (wpa_ie_len > 0 && | 
 | 		    (buf = kmalloc(wpa_ie_len * 2 + 10, GFP_ATOMIC))) { | 
 | 			p = buf; | 
 | 			p += sprintf(p, "wpa_ie="); | 
 | 			for (i = 0; i < wpa_ie_len; i++) { | 
 | 				p += sprintf(p, "%02x", wpa_ie[i]); | 
 | 			} | 
 | 			memset(&iwe, 0, sizeof (iwe)); | 
 | 			iwe.cmd = IWEVCUSTOM; | 
 | 			iwe.u.data.length = strlen(buf); | 
 | 			current_ev = iwe_stream_add_point(current_ev, end_buf, | 
 | 							  &iwe, buf); | 
 | 			kfree(buf); | 
 | 		} | 
 | 	} | 
 | 	return current_ev; | 
 | } | 
 |  | 
 | static int | 
 | prism54_get_scan(struct net_device *ndev, struct iw_request_info *info, | 
 | 		 struct iw_point *dwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	int i, rvalue; | 
 | 	struct obj_bsslist *bsslist; | 
 | 	u32 noise = 0; | 
 | 	char *current_ev = extra; | 
 | 	union oid_res_t r; | 
 |  | 
 | 	if (islpci_get_state(priv) < PRV_STATE_INIT) { | 
 | 		/* device is not ready, fail gently */ | 
 | 		dwrq->length = 0; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* first get the noise value. We will use it to report the link quality */ | 
 | 	rvalue = mgt_get_request(priv, DOT11_OID_NOISEFLOOR, 0, NULL, &r); | 
 | 	noise = r.u; | 
 |  | 
 | 	/* Ask the device for a list of known bss. | 
 | 	* The old API, using SIOCGIWAPLIST, had a hard limit of IW_MAX_AP=64. | 
 | 	* The new API, using SIOCGIWSCAN, is only limited by the buffer size. | 
 | 	* WE-14->WE-16, the buffer is limited to IW_SCAN_MAX_DATA bytes. | 
 | 	* Starting with WE-17, the buffer can be as big as needed. | 
 | 	* But the device won't repport anything if you change the value | 
 | 	* of IWMAX_BSS=24. */ | 
 | 	 | 
 | 	rvalue |= mgt_get_request(priv, DOT11_OID_BSSLIST, 0, NULL, &r); | 
 | 	bsslist = r.ptr; | 
 |  | 
 | 	/* ok now, scan the list and translate its info */ | 
 | 	for (i = 0; i < (int) bsslist->nr; i++) { | 
 | 		current_ev = prism54_translate_bss(ndev, current_ev, | 
 | 						   extra + dwrq->length, | 
 | 						   &(bsslist->bsslist[i]), | 
 | 						   noise); | 
 | #if WIRELESS_EXT > 16 | 
 | 		/* Check if there is space for one more entry */ | 
 | 		if((extra + dwrq->length - current_ev) <= IW_EV_ADDR_LEN) { | 
 | 			/* Ask user space to try again with a bigger buffer */ | 
 | 			rvalue = -E2BIG; | 
 | 			break; | 
 | 		} | 
 | #endif /* WIRELESS_EXT > 16 */ | 
 | 	} | 
 |  | 
 | 	kfree(bsslist); | 
 | 	dwrq->length = (current_ev - extra); | 
 | 	dwrq->flags = 0;	/* todo */ | 
 |  | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | static int | 
 | prism54_set_essid(struct net_device *ndev, struct iw_request_info *info, | 
 | 		  struct iw_point *dwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	struct obj_ssid essid; | 
 |  | 
 | 	memset(essid.octets, 0, 33); | 
 |  | 
 | 	/* Check if we were asked for `any' */ | 
 | 	if (dwrq->flags && dwrq->length) { | 
 | 		if (dwrq->length > min(33, IW_ESSID_MAX_SIZE + 1)) | 
 | 			return -E2BIG; | 
 | 		essid.length = dwrq->length - 1; | 
 | 		memcpy(essid.octets, extra, dwrq->length); | 
 | 	} else | 
 | 		essid.length = 0; | 
 |  | 
 | 	if (priv->iw_mode != IW_MODE_MONITOR) | 
 | 		return mgt_set_request(priv, DOT11_OID_SSID, 0, &essid); | 
 |  | 
 | 	/* If in monitor mode, just save to mib */ | 
 | 	mgt_set(priv, DOT11_OID_SSID, &essid); | 
 | 	return 0; | 
 |  | 
 | } | 
 |  | 
 | static int | 
 | prism54_get_essid(struct net_device *ndev, struct iw_request_info *info, | 
 | 		  struct iw_point *dwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	struct obj_ssid *essid; | 
 | 	union oid_res_t r; | 
 | 	int rvalue; | 
 |  | 
 | 	rvalue = mgt_get_request(priv, DOT11_OID_SSID, 0, NULL, &r); | 
 | 	essid = r.ptr; | 
 |  | 
 | 	if (essid->length) { | 
 | 		dwrq->flags = 1;	/* set ESSID to ON for Wireless Extensions */ | 
 | 		/* if it is to big, trunk it */ | 
 | 		dwrq->length = min(IW_ESSID_MAX_SIZE, essid->length + 1); | 
 | 	} else { | 
 | 		dwrq->flags = 0; | 
 | 		dwrq->length = 0; | 
 | 	} | 
 | 	essid->octets[essid->length] = '\0'; | 
 | 	memcpy(extra, essid->octets, dwrq->length); | 
 | 	kfree(essid); | 
 |  | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | /* Provides no functionality, just completes the ioctl. In essence this is a  | 
 |  * just a cosmetic ioctl. | 
 |  */ | 
 | static int | 
 | prism54_set_nick(struct net_device *ndev, struct iw_request_info *info, | 
 | 		 struct iw_point *dwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 |  | 
 | 	if (dwrq->length > IW_ESSID_MAX_SIZE) | 
 | 		return -E2BIG; | 
 |  | 
 | 	down_write(&priv->mib_sem); | 
 | 	memset(priv->nickname, 0, sizeof (priv->nickname)); | 
 | 	memcpy(priv->nickname, extra, dwrq->length); | 
 | 	up_write(&priv->mib_sem); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | prism54_get_nick(struct net_device *ndev, struct iw_request_info *info, | 
 | 		 struct iw_point *dwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 |  | 
 | 	dwrq->length = 0; | 
 |  | 
 | 	down_read(&priv->mib_sem); | 
 | 	dwrq->length = strlen(priv->nickname) + 1; | 
 | 	memcpy(extra, priv->nickname, dwrq->length); | 
 | 	up_read(&priv->mib_sem); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Set the allowed Bitrates */ | 
 |  | 
 | static int | 
 | prism54_set_rate(struct net_device *ndev, | 
 | 		 struct iw_request_info *info, | 
 | 		 struct iw_param *vwrq, char *extra) | 
 | { | 
 |  | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	u32 rate, profile; | 
 | 	char *data; | 
 | 	int ret, i; | 
 | 	union oid_res_t r; | 
 |  | 
 | 	if (vwrq->value == -1) { | 
 | 		/* auto mode. No limit. */ | 
 | 		profile = 1; | 
 | 		return mgt_set_request(priv, DOT11_OID_PROFILES, 0, &profile); | 
 | 	} | 
 |  | 
 | 	ret = mgt_get_request(priv, DOT11_OID_SUPPORTEDRATES, 0, NULL, &r); | 
 | 	if (ret) { | 
 | 		kfree(r.ptr); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	rate = (u32) (vwrq->value / 500000); | 
 | 	data = r.ptr; | 
 | 	i = 0; | 
 |  | 
 | 	while (data[i]) { | 
 | 		if (rate && (data[i] == rate)) { | 
 | 			break; | 
 | 		} | 
 | 		if (vwrq->value == i) { | 
 | 			break; | 
 | 		} | 
 | 		data[i] |= 0x80; | 
 | 		i++; | 
 | 	} | 
 |  | 
 | 	if (!data[i]) { | 
 | 		kfree(r.ptr); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	data[i] |= 0x80; | 
 | 	data[i + 1] = 0; | 
 |  | 
 | 	/* Now, check if we want a fixed or auto value */ | 
 | 	if (vwrq->fixed) { | 
 | 		data[0] = data[i]; | 
 | 		data[1] = 0; | 
 | 	} | 
 |  | 
 | /* | 
 | 	i = 0; | 
 | 	printk("prism54 rate: "); | 
 | 	while(data[i]) { | 
 | 		printk("%u ", data[i]); | 
 | 		i++; | 
 | 	} | 
 | 	printk("0\n"); | 
 | */ | 
 | 	profile = -1; | 
 | 	ret = mgt_set_request(priv, DOT11_OID_PROFILES, 0, &profile); | 
 | 	ret |= mgt_set_request(priv, DOT11_OID_EXTENDEDRATES, 0, data); | 
 | 	ret |= mgt_set_request(priv, DOT11_OID_RATES, 0, data); | 
 |  | 
 | 	kfree(r.ptr); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* Get the current bit rate */ | 
 | static int | 
 | prism54_get_rate(struct net_device *ndev, | 
 | 		 struct iw_request_info *info, | 
 | 		 struct iw_param *vwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	int rvalue; | 
 | 	char *data; | 
 | 	union oid_res_t r; | 
 |  | 
 | 	/* Get the current bit rate */ | 
 | 	if ((rvalue = mgt_get_request(priv, GEN_OID_LINKSTATE, 0, NULL, &r))) | 
 | 		return rvalue; | 
 | 	vwrq->value = r.u * 500000; | 
 |  | 
 | 	/* request the device for the enabled rates */ | 
 | 	rvalue = mgt_get_request(priv, DOT11_OID_RATES, 0, NULL, &r); | 
 | 	if (rvalue) { | 
 | 		kfree(r.ptr); | 
 | 		return rvalue; | 
 | 	} | 
 | 	data = r.ptr; | 
 | 	vwrq->fixed = (data[0] != 0) && (data[1] == 0); | 
 | 	kfree(r.ptr); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | prism54_set_rts(struct net_device *ndev, struct iw_request_info *info, | 
 | 		struct iw_param *vwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 |  | 
 | 	return mgt_set_request(priv, DOT11_OID_RTSTHRESH, 0, &vwrq->value); | 
 | } | 
 |  | 
 | static int | 
 | prism54_get_rts(struct net_device *ndev, struct iw_request_info *info, | 
 | 		struct iw_param *vwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	union oid_res_t r; | 
 | 	int rvalue; | 
 |  | 
 | 	/* get the rts threshold */ | 
 | 	rvalue = mgt_get_request(priv, DOT11_OID_RTSTHRESH, 0, NULL, &r); | 
 | 	vwrq->value = r.u; | 
 |  | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | static int | 
 | prism54_set_frag(struct net_device *ndev, struct iw_request_info *info, | 
 | 		 struct iw_param *vwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 |  | 
 | 	return mgt_set_request(priv, DOT11_OID_FRAGTHRESH, 0, &vwrq->value); | 
 | } | 
 |  | 
 | static int | 
 | prism54_get_frag(struct net_device *ndev, struct iw_request_info *info, | 
 | 		 struct iw_param *vwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	union oid_res_t r; | 
 | 	int rvalue; | 
 |  | 
 | 	rvalue = mgt_get_request(priv, DOT11_OID_FRAGTHRESH, 0, NULL, &r); | 
 | 	vwrq->value = r.u; | 
 |  | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | /* Here we have (min,max) = max retries for (small frames, big frames). Where | 
 |  * big frame <=>  bigger than the rts threshold | 
 |  * small frame <=>  smaller than the rts threshold | 
 |  * This is not really the behavior expected by the wireless tool but it seems | 
 |  * to be a common behavior in other drivers. | 
 |  */ | 
 |  | 
 | static int | 
 | prism54_set_retry(struct net_device *ndev, struct iw_request_info *info, | 
 | 		  struct iw_param *vwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	u32 slimit = 0, llimit = 0;	/* short and long limit */ | 
 | 	u32 lifetime = 0; | 
 | 	int rvalue = 0; | 
 |  | 
 | 	if (vwrq->disabled) | 
 | 		/* we cannot disable this feature */ | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (vwrq->flags & IW_RETRY_LIMIT) { | 
 | 		if (vwrq->flags & IW_RETRY_MIN) | 
 | 			slimit = vwrq->value; | 
 | 		else if (vwrq->flags & IW_RETRY_MAX) | 
 | 			llimit = vwrq->value; | 
 | 		else { | 
 | 			/* we are asked to set both */ | 
 | 			slimit = vwrq->value; | 
 | 			llimit = vwrq->value; | 
 | 		} | 
 | 	} | 
 | 	if (vwrq->flags & IW_RETRY_LIFETIME) | 
 | 		/* Wireless tools use us unit while the device uses 1024 us unit */ | 
 | 		lifetime = vwrq->value / 1024; | 
 |  | 
 | 	/* now set what is requested */ | 
 | 	if (slimit) | 
 | 		rvalue = | 
 | 		    mgt_set_request(priv, DOT11_OID_SHORTRETRIES, 0, &slimit); | 
 | 	if (llimit) | 
 | 		rvalue |= | 
 | 		    mgt_set_request(priv, DOT11_OID_LONGRETRIES, 0, &llimit); | 
 | 	if (lifetime) | 
 | 		rvalue |= | 
 | 		    mgt_set_request(priv, DOT11_OID_MAXTXLIFETIME, 0, | 
 | 				    &lifetime); | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | static int | 
 | prism54_get_retry(struct net_device *ndev, struct iw_request_info *info, | 
 | 		  struct iw_param *vwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	union oid_res_t r; | 
 | 	int rvalue = 0; | 
 | 	vwrq->disabled = 0;	/* It cannot be disabled */ | 
 |  | 
 | 	if ((vwrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { | 
 | 		/* we are asked for the life time */ | 
 | 		rvalue = | 
 | 		    mgt_get_request(priv, DOT11_OID_MAXTXLIFETIME, 0, NULL, &r); | 
 | 		vwrq->value = r.u * 1024; | 
 | 		vwrq->flags = IW_RETRY_LIFETIME; | 
 | 	} else if ((vwrq->flags & IW_RETRY_MAX)) { | 
 | 		/* we are asked for the long retry limit */ | 
 | 		rvalue |= | 
 | 		    mgt_get_request(priv, DOT11_OID_LONGRETRIES, 0, NULL, &r); | 
 | 		vwrq->value = r.u; | 
 | 		vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; | 
 | 	} else { | 
 | 		/* default. get the  short retry limit */ | 
 | 		rvalue |= | 
 | 		    mgt_get_request(priv, DOT11_OID_SHORTRETRIES, 0, NULL, &r); | 
 | 		vwrq->value = r.u; | 
 | 		vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MIN; | 
 | 	} | 
 |  | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | static int | 
 | prism54_set_encode(struct net_device *ndev, struct iw_request_info *info, | 
 | 		   struct iw_point *dwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	int rvalue = 0, force = 0; | 
 | 	int authen = DOT11_AUTH_OS, invoke = 0, exunencrypt = 0; | 
 | 	union oid_res_t r; | 
 |  | 
 | 	/* with the new API, it's impossible to get a NULL pointer. | 
 | 	 * New version of iwconfig set the IW_ENCODE_NOKEY flag | 
 | 	 * when no key is given, but older versions don't. */ | 
 |  | 
 | 	if (dwrq->length > 0) { | 
 | 		/* we have a key to set */ | 
 | 		int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; | 
 | 		int current_index; | 
 | 		struct obj_key key = { DOT11_PRIV_WEP, 0, "" }; | 
 |  | 
 | 		/* get the current key index */ | 
 | 		rvalue = mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r); | 
 | 		current_index = r.u; | 
 | 		/* Verify that the key is not marked as invalid */ | 
 | 		if (!(dwrq->flags & IW_ENCODE_NOKEY)) { | 
 | 			key.length = dwrq->length > sizeof (key.key) ? | 
 | 			    sizeof (key.key) : dwrq->length; | 
 | 			memcpy(key.key, extra, key.length); | 
 | 			if (key.length == 32) | 
 | 				/* we want WPA-PSK */ | 
 | 				key.type = DOT11_PRIV_TKIP; | 
 | 			if ((index < 0) || (index > 3)) | 
 | 				/* no index provided use the current one */ | 
 | 				index = current_index; | 
 |  | 
 | 			/* now send the key to the card  */ | 
 | 			rvalue |= | 
 | 			    mgt_set_request(priv, DOT11_OID_DEFKEYX, index, | 
 | 					    &key); | 
 | 		} | 
 | 		/* | 
 | 		 * If a valid key is set, encryption should be enabled  | 
 | 		 * (user may turn it off later). | 
 | 		 * This is also how "iwconfig ethX key on" works | 
 | 		 */ | 
 | 		if ((index == current_index) && (key.length > 0)) | 
 | 			force = 1; | 
 | 	} else { | 
 | 		int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; | 
 | 		if ((index >= 0) && (index <= 3)) { | 
 | 			/* we want to set the key index */ | 
 | 			rvalue |= | 
 | 			    mgt_set_request(priv, DOT11_OID_DEFKEYID, 0, | 
 | 					    &index); | 
 | 		} else { | 
 | 			if (!dwrq->flags & IW_ENCODE_MODE) { | 
 | 				/* we cannot do anything. Complain. */ | 
 | 				return -EINVAL; | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	/* now read the flags */ | 
 | 	if (dwrq->flags & IW_ENCODE_DISABLED) { | 
 | 		/* Encoding disabled,  | 
 | 		 * authen = DOT11_AUTH_OS; | 
 | 		 * invoke = 0; | 
 | 		 * exunencrypt = 0; */ | 
 | 	} | 
 | 	if (dwrq->flags & IW_ENCODE_OPEN) | 
 | 		/* Encode but accept non-encoded packets. No auth */ | 
 | 		invoke = 1; | 
 | 	if ((dwrq->flags & IW_ENCODE_RESTRICTED) || force) { | 
 | 		/* Refuse non-encoded packets. Auth */ | 
 | 		authen = DOT11_AUTH_BOTH; | 
 | 		invoke = 1; | 
 | 		exunencrypt = 1; | 
 | 	} | 
 | 	/* do the change if requested  */ | 
 | 	if ((dwrq->flags & IW_ENCODE_MODE) || force) { | 
 | 		rvalue |= | 
 | 		    mgt_set_request(priv, DOT11_OID_AUTHENABLE, 0, &authen); | 
 | 		rvalue |= | 
 | 		    mgt_set_request(priv, DOT11_OID_PRIVACYINVOKED, 0, &invoke); | 
 | 		rvalue |= | 
 | 		    mgt_set_request(priv, DOT11_OID_EXUNENCRYPTED, 0, | 
 | 				    &exunencrypt); | 
 | 	} | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | static int | 
 | prism54_get_encode(struct net_device *ndev, struct iw_request_info *info, | 
 | 		   struct iw_point *dwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	struct obj_key *key; | 
 | 	u32 devindex, index = (dwrq->flags & IW_ENCODE_INDEX) - 1; | 
 | 	u32 authen = 0, invoke = 0, exunencrypt = 0; | 
 | 	int rvalue; | 
 | 	union oid_res_t r; | 
 |  | 
 | 	/* first get the flags */ | 
 | 	rvalue = mgt_get_request(priv, DOT11_OID_AUTHENABLE, 0, NULL, &r); | 
 | 	authen = r.u; | 
 | 	rvalue |= mgt_get_request(priv, DOT11_OID_PRIVACYINVOKED, 0, NULL, &r); | 
 | 	invoke = r.u; | 
 | 	rvalue |= mgt_get_request(priv, DOT11_OID_EXUNENCRYPTED, 0, NULL, &r); | 
 | 	exunencrypt = r.u; | 
 |  | 
 | 	if (invoke && (authen == DOT11_AUTH_BOTH) && exunencrypt) | 
 | 		dwrq->flags = IW_ENCODE_RESTRICTED; | 
 | 	else if ((authen == DOT11_AUTH_OS) && !exunencrypt) { | 
 | 		if (invoke) | 
 | 			dwrq->flags = IW_ENCODE_OPEN; | 
 | 		else | 
 | 			dwrq->flags = IW_ENCODE_DISABLED; | 
 | 	} else | 
 | 		/* The card should not work in this state */ | 
 | 		dwrq->flags = 0; | 
 |  | 
 | 	/* get the current device key index */ | 
 | 	rvalue |= mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r); | 
 | 	devindex = r.u; | 
 | 	/* Now get the key, return it */ | 
 | 	if ((index < 0) || (index > 3)) | 
 | 		/* no index provided, use the current one */ | 
 | 		index = devindex; | 
 | 	rvalue |= mgt_get_request(priv, DOT11_OID_DEFKEYX, index, NULL, &r); | 
 | 	key = r.ptr; | 
 | 	dwrq->length = key->length; | 
 | 	memcpy(extra, key->key, dwrq->length); | 
 | 	kfree(key); | 
 | 	/* return the used key index */ | 
 | 	dwrq->flags |= devindex + 1; | 
 |  | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | static int | 
 | prism54_get_txpower(struct net_device *ndev, struct iw_request_info *info, | 
 | 		    struct iw_param *vwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	union oid_res_t r; | 
 | 	int rvalue; | 
 |  | 
 | 	rvalue = mgt_get_request(priv, OID_INL_OUTPUTPOWER, 0, NULL, &r); | 
 | 	/* intersil firmware operates in 0.25 dBm (1/4 dBm) */ | 
 | 	vwrq->value = (s32) r.u / 4; | 
 | 	vwrq->fixed = 1; | 
 | 	/* radio is not turned of | 
 | 	 * btw: how is possible to turn off only the radio  | 
 | 	 */ | 
 | 	vwrq->disabled = 0; | 
 |  | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | static int | 
 | prism54_set_txpower(struct net_device *ndev, struct iw_request_info *info, | 
 | 		    struct iw_param *vwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	s32 u = vwrq->value; | 
 |  | 
 | 	/* intersil firmware operates in 0.25 dBm (1/4) */ | 
 | 	u *= 4; | 
 | 	if (vwrq->disabled) { | 
 | 		/* don't know how to disable radio */ | 
 | 		printk(KERN_DEBUG | 
 | 		       "%s: %s() disabling radio is not yet supported.\n", | 
 | 		       priv->ndev->name, __FUNCTION__); | 
 | 		return -ENOTSUPP; | 
 | 	} else if (vwrq->fixed) | 
 | 		/* currently only fixed value is supported */ | 
 | 		return mgt_set_request(priv, OID_INL_OUTPUTPOWER, 0, &u); | 
 | 	else { | 
 | 		printk(KERN_DEBUG | 
 | 		       "%s: %s() auto power will be implemented later.\n", | 
 | 		       priv->ndev->name, __FUNCTION__); | 
 | 		return -ENOTSUPP; | 
 | 	} | 
 | } | 
 |  | 
 | static int | 
 | prism54_reset(struct net_device *ndev, struct iw_request_info *info, | 
 | 	      __u32 * uwrq, char *extra) | 
 | { | 
 | 	islpci_reset(netdev_priv(ndev), 0); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | prism54_get_oid(struct net_device *ndev, struct iw_request_info *info, | 
 | 		struct iw_point *dwrq, char *extra) | 
 | { | 
 | 	union oid_res_t r; | 
 | 	int rvalue; | 
 | 	enum oid_num_t n = dwrq->flags; | 
 |  | 
 | 	rvalue = mgt_get_request((islpci_private *) ndev->priv, n, 0, NULL, &r); | 
 | 	dwrq->length = mgt_response_to_str(n, &r, extra); | 
 | 	if ((isl_oid[n].flags & OID_FLAG_TYPE) != OID_TYPE_U32) | 
 | 		kfree(r.ptr); | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | static int | 
 | prism54_set_u32(struct net_device *ndev, struct iw_request_info *info, | 
 | 		__u32 * uwrq, char *extra) | 
 | { | 
 | 	u32 oid = uwrq[0], u = uwrq[1]; | 
 |  | 
 | 	return mgt_set_request((islpci_private *) ndev->priv, oid, 0, &u); | 
 | } | 
 |  | 
 | static int | 
 | prism54_set_raw(struct net_device *ndev, struct iw_request_info *info, | 
 | 		struct iw_point *dwrq, char *extra) | 
 | { | 
 | 	u32 oid = dwrq->flags; | 
 |  | 
 | 	return mgt_set_request((islpci_private *) ndev->priv, oid, 0, extra); | 
 | } | 
 |  | 
 | void | 
 | prism54_acl_init(struct islpci_acl *acl) | 
 | { | 
 | 	sema_init(&acl->sem, 1); | 
 | 	INIT_LIST_HEAD(&acl->mac_list); | 
 | 	acl->size = 0; | 
 | 	acl->policy = MAC_POLICY_OPEN; | 
 | } | 
 |  | 
 | static void | 
 | prism54_clear_mac(struct islpci_acl *acl) | 
 | { | 
 | 	struct list_head *ptr, *next; | 
 | 	struct mac_entry *entry; | 
 |  | 
 | 	if (down_interruptible(&acl->sem)) | 
 | 		return; | 
 |  | 
 | 	if (acl->size == 0) { | 
 | 		up(&acl->sem); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	for (ptr = acl->mac_list.next, next = ptr->next; | 
 | 	     ptr != &acl->mac_list; ptr = next, next = ptr->next) { | 
 | 		entry = list_entry(ptr, struct mac_entry, _list); | 
 | 		list_del(ptr); | 
 | 		kfree(entry); | 
 | 	} | 
 | 	acl->size = 0; | 
 | 	up(&acl->sem); | 
 | } | 
 |  | 
 | void | 
 | prism54_acl_clean(struct islpci_acl *acl) | 
 | { | 
 | 	prism54_clear_mac(acl); | 
 | } | 
 |  | 
 | static int | 
 | prism54_add_mac(struct net_device *ndev, struct iw_request_info *info, | 
 | 		struct sockaddr *awrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	struct islpci_acl *acl = &priv->acl; | 
 | 	struct mac_entry *entry; | 
 | 	struct sockaddr *addr = (struct sockaddr *) extra; | 
 |  | 
 | 	if (addr->sa_family != ARPHRD_ETHER) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	entry = kmalloc(sizeof (struct mac_entry), GFP_KERNEL); | 
 | 	if (entry == NULL) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	memcpy(entry->addr, addr->sa_data, ETH_ALEN); | 
 |  | 
 | 	if (down_interruptible(&acl->sem)) { | 
 | 		kfree(entry); | 
 | 		return -ERESTARTSYS; | 
 | 	} | 
 | 	list_add_tail(&entry->_list, &acl->mac_list); | 
 | 	acl->size++; | 
 | 	up(&acl->sem); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | prism54_del_mac(struct net_device *ndev, struct iw_request_info *info, | 
 | 		struct sockaddr *awrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	struct islpci_acl *acl = &priv->acl; | 
 | 	struct mac_entry *entry; | 
 | 	struct list_head *ptr; | 
 | 	struct sockaddr *addr = (struct sockaddr *) extra; | 
 |  | 
 | 	if (addr->sa_family != ARPHRD_ETHER) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (down_interruptible(&acl->sem)) | 
 | 		return -ERESTARTSYS; | 
 | 	for (ptr = acl->mac_list.next; ptr != &acl->mac_list; ptr = ptr->next) { | 
 | 		entry = list_entry(ptr, struct mac_entry, _list); | 
 |  | 
 | 		if (memcmp(entry->addr, addr->sa_data, ETH_ALEN) == 0) { | 
 | 			list_del(ptr); | 
 | 			acl->size--; | 
 | 			kfree(entry); | 
 | 			up(&acl->sem); | 
 | 			return 0; | 
 | 		} | 
 | 	} | 
 | 	up(&acl->sem); | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | static int | 
 | prism54_get_mac(struct net_device *ndev, struct iw_request_info *info, | 
 | 		struct iw_point *dwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	struct islpci_acl *acl = &priv->acl; | 
 | 	struct mac_entry *entry; | 
 | 	struct list_head *ptr; | 
 | 	struct sockaddr *dst = (struct sockaddr *) extra; | 
 |  | 
 | 	dwrq->length = 0; | 
 |  | 
 | 	if (down_interruptible(&acl->sem)) | 
 | 		return -ERESTARTSYS; | 
 |  | 
 | 	for (ptr = acl->mac_list.next; ptr != &acl->mac_list; ptr = ptr->next) { | 
 | 		entry = list_entry(ptr, struct mac_entry, _list); | 
 |  | 
 | 		memcpy(dst->sa_data, entry->addr, ETH_ALEN); | 
 | 		dst->sa_family = ARPHRD_ETHER; | 
 | 		dwrq->length++; | 
 | 		dst++; | 
 | 	} | 
 | 	up(&acl->sem); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Setting policy also clears the MAC acl, even if we don't change the defaut | 
 |  * policy | 
 |  */ | 
 |  | 
 | static int | 
 | prism54_set_policy(struct net_device *ndev, struct iw_request_info *info, | 
 | 		   __u32 * uwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	struct islpci_acl *acl = &priv->acl; | 
 | 	u32 mlmeautolevel; | 
 |  | 
 | 	prism54_clear_mac(acl); | 
 |  | 
 | 	if ((*uwrq < MAC_POLICY_OPEN) || (*uwrq > MAC_POLICY_REJECT)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	down_write(&priv->mib_sem); | 
 |  | 
 | 	acl->policy = *uwrq; | 
 |  | 
 | 	/* the ACL code needs an intermediate mlmeautolevel */ | 
 | 	if ((priv->iw_mode == IW_MODE_MASTER) && | 
 | 	    (acl->policy != MAC_POLICY_OPEN)) | 
 | 		mlmeautolevel = DOT11_MLME_INTERMEDIATE; | 
 | 	else | 
 | 		mlmeautolevel = CARD_DEFAULT_MLME_MODE; | 
 | 	if (priv->wpa) | 
 | 		mlmeautolevel = DOT11_MLME_EXTENDED; | 
 | 	mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &mlmeautolevel); | 
 | 	/* restart the card with our new policy */ | 
 | 	if (mgt_commit(priv)) { | 
 | 		up_write(&priv->mib_sem); | 
 | 		return -EIO; | 
 | 	} | 
 | 	up_write(&priv->mib_sem); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | prism54_get_policy(struct net_device *ndev, struct iw_request_info *info, | 
 | 		   __u32 * uwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	struct islpci_acl *acl = &priv->acl; | 
 |  | 
 | 	*uwrq = acl->policy; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Return 1 only if client should be accepted. */ | 
 |  | 
 | static int | 
 | prism54_mac_accept(struct islpci_acl *acl, char *mac) | 
 | { | 
 | 	struct list_head *ptr; | 
 | 	struct mac_entry *entry; | 
 | 	int res = 0; | 
 |  | 
 | 	if (down_interruptible(&acl->sem)) | 
 | 		return -ERESTARTSYS; | 
 |  | 
 | 	if (acl->policy == MAC_POLICY_OPEN) { | 
 | 		up(&acl->sem); | 
 | 		return 1; | 
 | 	} | 
 |  | 
 | 	for (ptr = acl->mac_list.next; ptr != &acl->mac_list; ptr = ptr->next) { | 
 | 		entry = list_entry(ptr, struct mac_entry, _list); | 
 | 		if (memcmp(entry->addr, mac, ETH_ALEN) == 0) { | 
 | 			res = 1; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	res = (acl->policy == MAC_POLICY_ACCEPT) ? !res : res; | 
 | 	up(&acl->sem); | 
 |  | 
 | 	return res; | 
 | } | 
 |  | 
 | static int | 
 | prism54_kick_all(struct net_device *ndev, struct iw_request_info *info, | 
 | 		 struct iw_point *dwrq, char *extra) | 
 | { | 
 | 	struct obj_mlme *mlme; | 
 | 	int rvalue; | 
 |  | 
 | 	mlme = kmalloc(sizeof (struct obj_mlme), GFP_KERNEL); | 
 | 	if (mlme == NULL) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* Tell the card to kick every client */ | 
 | 	mlme->id = 0; | 
 | 	rvalue = | 
 | 	    mgt_set_request(netdev_priv(ndev), DOT11_OID_DISASSOCIATE, 0, mlme); | 
 | 	kfree(mlme); | 
 |  | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | static int | 
 | prism54_kick_mac(struct net_device *ndev, struct iw_request_info *info, | 
 | 		 struct sockaddr *awrq, char *extra) | 
 | { | 
 | 	struct obj_mlme *mlme; | 
 | 	struct sockaddr *addr = (struct sockaddr *) extra; | 
 | 	int rvalue; | 
 |  | 
 | 	if (addr->sa_family != ARPHRD_ETHER) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	mlme = kmalloc(sizeof (struct obj_mlme), GFP_KERNEL); | 
 | 	if (mlme == NULL) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* Tell the card to only kick the corresponding bastard */ | 
 | 	memcpy(mlme->address, addr->sa_data, ETH_ALEN); | 
 | 	mlme->id = -1; | 
 | 	rvalue = | 
 | 	    mgt_set_request(netdev_priv(ndev), DOT11_OID_DISASSOCIATE, 0, mlme); | 
 |  | 
 | 	kfree(mlme); | 
 |  | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | /* Translate a TRAP oid into a wireless event. Called in islpci_mgt_receive. */ | 
 |  | 
 | static void | 
 | format_event(islpci_private *priv, char *dest, const char *str, | 
 | 	     const struct obj_mlme *mlme, u16 *length, int error) | 
 | { | 
 | 	const u8 *a = mlme->address; | 
 | 	int n = snprintf(dest, IW_CUSTOM_MAX, | 
 | 			 "%s %s %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X %s (%2.2X)", | 
 | 			 str, | 
 | 			 ((priv->iw_mode == IW_MODE_MASTER) ? "from" : "to"), | 
 | 			 a[0], a[1], a[2], a[3], a[4], a[5], | 
 | 			 (error ? (mlme->code ? " : REJECTED " : " : ACCEPTED ") | 
 | 			  : ""), mlme->code); | 
 | 	BUG_ON(n > IW_CUSTOM_MAX); | 
 | 	*length = n; | 
 | } | 
 |  | 
 | static void | 
 | send_formatted_event(islpci_private *priv, const char *str, | 
 | 		     const struct obj_mlme *mlme, int error) | 
 | { | 
 | 	union iwreq_data wrqu; | 
 | 	char *memptr; | 
 |  | 
 | 	memptr = kmalloc(IW_CUSTOM_MAX, GFP_KERNEL); | 
 | 	if (!memptr) | 
 | 		return; | 
 | 	wrqu.data.pointer = memptr; | 
 | 	wrqu.data.length = 0; | 
 | 	format_event(priv, memptr, str, mlme, &wrqu.data.length, | 
 | 		     error); | 
 | 	wireless_send_event(priv->ndev, IWEVCUSTOM, &wrqu, memptr); | 
 | 	kfree(memptr); | 
 | } | 
 |  | 
 | static void | 
 | send_simple_event(islpci_private *priv, const char *str) | 
 | { | 
 | 	union iwreq_data wrqu; | 
 | 	char *memptr; | 
 | 	int n = strlen(str); | 
 |  | 
 | 	memptr = kmalloc(IW_CUSTOM_MAX, GFP_KERNEL); | 
 | 	if (!memptr) | 
 | 		return; | 
 | 	BUG_ON(n > IW_CUSTOM_MAX); | 
 | 	wrqu.data.pointer = memptr; | 
 | 	wrqu.data.length = n; | 
 | 	strcpy(memptr, str); | 
 | 	wireless_send_event(priv->ndev, IWEVCUSTOM, &wrqu, memptr); | 
 | 	kfree(memptr); | 
 | } | 
 |  | 
 | static void | 
 | link_changed(struct net_device *ndev, u32 bitrate) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 |  | 
 | 	if (bitrate) { | 
 | 		if (priv->iw_mode == IW_MODE_INFRA) { | 
 | 			union iwreq_data uwrq; | 
 | 			prism54_get_wap(ndev, NULL, (struct sockaddr *) &uwrq, | 
 | 					NULL); | 
 | 			wireless_send_event(ndev, SIOCGIWAP, &uwrq, NULL); | 
 | 		} else | 
 | 			send_simple_event(netdev_priv(ndev), | 
 | 					  "Link established"); | 
 | 	} else | 
 | 		send_simple_event(netdev_priv(ndev), "Link lost"); | 
 | } | 
 |  | 
 | /* Beacon/ProbeResp payload header */ | 
 | struct ieee80211_beacon_phdr { | 
 | 	u8 timestamp[8]; | 
 | 	u16 beacon_int; | 
 | 	u16 capab_info; | 
 | } __attribute__ ((packed)); | 
 |  | 
 | #define WLAN_EID_GENERIC 0xdd | 
 | static u8 wpa_oid[4] = { 0x00, 0x50, 0xf2, 1 }; | 
 |  | 
 | #define MAC2STR(a) (a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5] | 
 | #define MACSTR "%02x:%02x:%02x:%02x:%02x:%02x" | 
 |  | 
 | static void | 
 | prism54_wpa_ie_add(islpci_private *priv, u8 *bssid, | 
 | 		   u8 *wpa_ie, size_t wpa_ie_len) | 
 | { | 
 | 	struct list_head *ptr; | 
 | 	struct islpci_bss_wpa_ie *bss = NULL; | 
 |  | 
 | 	if (wpa_ie_len > MAX_WPA_IE_LEN) | 
 | 		wpa_ie_len = MAX_WPA_IE_LEN; | 
 |  | 
 | 	if (down_interruptible(&priv->wpa_sem)) | 
 | 		return; | 
 |  | 
 | 	/* try to use existing entry */ | 
 | 	list_for_each(ptr, &priv->bss_wpa_list) { | 
 | 		bss = list_entry(ptr, struct islpci_bss_wpa_ie, list); | 
 | 		if (memcmp(bss->bssid, bssid, ETH_ALEN) == 0) { | 
 | 			list_move(&bss->list, &priv->bss_wpa_list); | 
 | 			break; | 
 | 		} | 
 | 		bss = NULL; | 
 | 	} | 
 |  | 
 | 	if (bss == NULL) { | 
 | 		/* add a new BSS entry; if max number of entries is already | 
 | 		 * reached, replace the least recently updated */ | 
 | 		if (priv->num_bss_wpa >= MAX_BSS_WPA_IE_COUNT) { | 
 | 			bss = list_entry(priv->bss_wpa_list.prev, | 
 | 					 struct islpci_bss_wpa_ie, list); | 
 | 			list_del(&bss->list); | 
 | 		} else { | 
 | 			bss = kmalloc(sizeof (*bss), GFP_ATOMIC); | 
 | 			if (bss != NULL) { | 
 | 				priv->num_bss_wpa++; | 
 | 				memset(bss, 0, sizeof (*bss)); | 
 | 			} | 
 | 		} | 
 | 		if (bss != NULL) { | 
 | 			memcpy(bss->bssid, bssid, ETH_ALEN); | 
 | 			list_add(&bss->list, &priv->bss_wpa_list); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (bss != NULL) { | 
 | 		memcpy(bss->wpa_ie, wpa_ie, wpa_ie_len); | 
 | 		bss->wpa_ie_len = wpa_ie_len; | 
 | 		bss->last_update = jiffies; | 
 | 	} else { | 
 | 		printk(KERN_DEBUG "Failed to add BSS WPA entry for " MACSTR | 
 | 		       "\n", MAC2STR(bssid)); | 
 | 	} | 
 |  | 
 | 	/* expire old entries from WPA list */ | 
 | 	while (priv->num_bss_wpa > 0) { | 
 | 		bss = list_entry(priv->bss_wpa_list.prev, | 
 | 				 struct islpci_bss_wpa_ie, list); | 
 | 		if (!time_after(jiffies, bss->last_update + 60 * HZ)) | 
 | 			break; | 
 |  | 
 | 		list_del(&bss->list); | 
 | 		priv->num_bss_wpa--; | 
 | 		kfree(bss); | 
 | 	} | 
 |  | 
 | 	up(&priv->wpa_sem); | 
 | } | 
 |  | 
 | static size_t | 
 | prism54_wpa_ie_get(islpci_private *priv, u8 *bssid, u8 *wpa_ie) | 
 | { | 
 | 	struct list_head *ptr; | 
 | 	struct islpci_bss_wpa_ie *bss = NULL; | 
 | 	size_t len = 0; | 
 |  | 
 | 	if (down_interruptible(&priv->wpa_sem)) | 
 | 		return 0; | 
 |  | 
 | 	list_for_each(ptr, &priv->bss_wpa_list) { | 
 | 		bss = list_entry(ptr, struct islpci_bss_wpa_ie, list); | 
 | 		if (memcmp(bss->bssid, bssid, ETH_ALEN) == 0) | 
 | 			break; | 
 | 		bss = NULL; | 
 | 	} | 
 | 	if (bss) { | 
 | 		len = bss->wpa_ie_len; | 
 | 		memcpy(wpa_ie, bss->wpa_ie, len); | 
 | 	} | 
 | 	up(&priv->wpa_sem); | 
 |  | 
 | 	return len; | 
 | } | 
 |  | 
 | void | 
 | prism54_wpa_ie_init(islpci_private *priv) | 
 | { | 
 | 	INIT_LIST_HEAD(&priv->bss_wpa_list); | 
 | 	sema_init(&priv->wpa_sem, 1); | 
 | } | 
 |  | 
 | void | 
 | prism54_wpa_ie_clean(islpci_private *priv) | 
 | { | 
 | 	struct list_head *ptr, *n; | 
 |  | 
 | 	list_for_each_safe(ptr, n, &priv->bss_wpa_list) { | 
 | 		struct islpci_bss_wpa_ie *bss; | 
 | 		bss = list_entry(ptr, struct islpci_bss_wpa_ie, list); | 
 | 		kfree(bss); | 
 | 	} | 
 | } | 
 |  | 
 | static void | 
 | prism54_process_bss_data(islpci_private *priv, u32 oid, u8 *addr, | 
 | 			 u8 *payload, size_t len) | 
 | { | 
 | 	struct ieee80211_beacon_phdr *hdr; | 
 | 	u8 *pos, *end; | 
 |  | 
 | 	if (!priv->wpa) | 
 | 		return; | 
 |  | 
 | 	hdr = (struct ieee80211_beacon_phdr *) payload; | 
 | 	pos = (u8 *) (hdr + 1); | 
 | 	end = payload + len; | 
 | 	while (pos < end) { | 
 | 		if (pos + 2 + pos[1] > end) { | 
 | 			printk(KERN_DEBUG "Parsing Beacon/ProbeResp failed " | 
 | 			       "for " MACSTR "\n", MAC2STR(addr)); | 
 | 			return; | 
 | 		} | 
 | 		if (pos[0] == WLAN_EID_GENERIC && pos[1] >= 4 && | 
 | 		    memcmp(pos + 2, wpa_oid, 4) == 0) { | 
 | 			prism54_wpa_ie_add(priv, addr, pos, pos[1] + 2); | 
 | 			return; | 
 | 		} | 
 | 		pos += 2 + pos[1]; | 
 | 	} | 
 | } | 
 |  | 
 | static void | 
 | handle_request(islpci_private *priv, struct obj_mlme *mlme, enum oid_num_t oid) | 
 | { | 
 | 	if (((mlme->state == DOT11_STATE_AUTHING) || | 
 | 	     (mlme->state == DOT11_STATE_ASSOCING)) | 
 | 	    && mgt_mlme_answer(priv)) { | 
 | 		/* Someone is requesting auth and we must respond. Just send back | 
 | 		 * the trap with error code set accordingly. | 
 | 		 */ | 
 | 		mlme->code = prism54_mac_accept(&priv->acl, | 
 | 						mlme->address) ? 0 : 1; | 
 | 		mgt_set_request(priv, oid, 0, mlme); | 
 | 	} | 
 | } | 
 |  | 
 | static int | 
 | prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid, | 
 | 			    char *data) | 
 | { | 
 | 	struct obj_mlme *mlme = (struct obj_mlme *) data; | 
 | 	struct obj_mlmeex *mlmeex = (struct obj_mlmeex *) data; | 
 | 	struct obj_mlmeex *confirm; | 
 | 	u8 wpa_ie[MAX_WPA_IE_LEN]; | 
 | 	int wpa_ie_len; | 
 | 	size_t len = 0; /* u16, better? */ | 
 | 	u8 *payload = NULL, *pos = NULL; | 
 | 	int ret; | 
 |  | 
 | 	/* I think all trapable objects are listed here. | 
 | 	 * Some oids have a EX version. The difference is that they are emitted | 
 | 	 * in DOT11_MLME_EXTENDED mode (set with DOT11_OID_MLMEAUTOLEVEL) | 
 | 	 * with more info. | 
 | 	 * The few events already defined by the wireless tools are not really | 
 | 	 * suited. We use the more flexible custom event facility. | 
 | 	 */ | 
 |  | 
 | 	if (oid >= DOT11_OID_BEACON) { | 
 | 		len = mlmeex->size; | 
 | 		payload = pos = mlmeex->data; | 
 | 	} | 
 |  | 
 | 	/* I fear prism54_process_bss_data won't work with big endian data */ | 
 | 	if ((oid == DOT11_OID_BEACON) || (oid == DOT11_OID_PROBE)) | 
 | 		prism54_process_bss_data(priv, oid, mlmeex->address, | 
 | 					 payload, len); | 
 |  | 
 | 	mgt_le_to_cpu(isl_oid[oid].flags & OID_FLAG_TYPE, (void *) mlme); | 
 |  | 
 | 	switch (oid) { | 
 |  | 
 | 	case GEN_OID_LINKSTATE: | 
 | 		link_changed(priv->ndev, (u32) *data); | 
 | 		break; | 
 |  | 
 | 	case DOT11_OID_MICFAILURE: | 
 | 		send_simple_event(priv, "Mic failure"); | 
 | 		break; | 
 |  | 
 | 	case DOT11_OID_DEAUTHENTICATE: | 
 | 		send_formatted_event(priv, "DeAuthenticate request", mlme, 0); | 
 | 		break; | 
 |  | 
 | 	case DOT11_OID_AUTHENTICATE: | 
 | 		handle_request(priv, mlme, oid); | 
 | 		send_formatted_event(priv, "Authenticate request", mlme, 1); | 
 | 		break; | 
 |  | 
 | 	case DOT11_OID_DISASSOCIATE: | 
 | 		send_formatted_event(priv, "Disassociate request", mlme, 0); | 
 | 		break; | 
 |  | 
 | 	case DOT11_OID_ASSOCIATE: | 
 | 		handle_request(priv, mlme, oid); | 
 | 		send_formatted_event(priv, "Associate request", mlme, 1); | 
 | 		break; | 
 |  | 
 | 	case DOT11_OID_REASSOCIATE: | 
 | 		handle_request(priv, mlme, oid); | 
 | 		send_formatted_event(priv, "ReAssociate request", mlme, 1); | 
 | 		break; | 
 |  | 
 | 	case DOT11_OID_BEACON: | 
 | 		send_formatted_event(priv, | 
 | 				     "Received a beacon from an unkown AP", | 
 | 				     mlme, 0); | 
 | 		break; | 
 |  | 
 | 	case DOT11_OID_PROBE: | 
 | 		/* we received a probe from a client. */ | 
 | 		send_formatted_event(priv, "Received a probe from client", mlme, | 
 | 				     0); | 
 | 		break; | 
 |  | 
 | 		/* Note : "mlme" is actually a "struct obj_mlmeex *" here, but this | 
 | 		 * is backward compatible layout-wise with "struct obj_mlme". | 
 | 		 */ | 
 |  | 
 | 	case DOT11_OID_DEAUTHENTICATEEX: | 
 | 		send_formatted_event(priv, "DeAuthenticate request", mlme, 0); | 
 | 		break; | 
 |  | 
 | 	case DOT11_OID_AUTHENTICATEEX: | 
 | 		handle_request(priv, mlme, oid); | 
 | 		send_formatted_event(priv, "Authenticate request (ex)", mlme, 1); | 
 |  | 
 | 		if (priv->iw_mode != IW_MODE_MASTER  | 
 | 				&& mlmeex->state != DOT11_STATE_AUTHING) | 
 | 			break; | 
 |  | 
 | 		confirm = kmalloc(sizeof(struct obj_mlmeex) + 6, GFP_ATOMIC); | 
 |  | 
 | 		if (!confirm)  | 
 | 			break; | 
 |  | 
 | 		memcpy(&confirm->address, mlmeex->address, ETH_ALEN); | 
 | 		printk(KERN_DEBUG "Authenticate from: address:\t%02x:%02x:%02x:%02x:%02x:%02x\n",  | 
 | 				mlmeex->address[0], | 
 | 				mlmeex->address[1], | 
 | 				mlmeex->address[2], | 
 | 				mlmeex->address[3], | 
 | 				mlmeex->address[4], | 
 | 				mlmeex->address[5] | 
 | 				); | 
 | 		confirm->id = -1; /* or mlmeex->id ? */ | 
 | 		confirm->state = 0; /* not used */ | 
 | 		confirm->code = 0; | 
 | 		confirm->size = 6; | 
 | 		confirm->data[0] = 0x00; | 
 | 		confirm->data[1] = 0x00; | 
 | 		confirm->data[2] = 0x02; | 
 | 		confirm->data[3] = 0x00; | 
 | 		confirm->data[4] = 0x00; | 
 | 		confirm->data[5] = 0x00; | 
 |  | 
 | 		ret = mgt_set_varlen(priv, DOT11_OID_ASSOCIATEEX, confirm, 6); | 
 |  | 
 | 		kfree(confirm); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 		break; | 
 |  | 
 | 	case DOT11_OID_DISASSOCIATEEX: | 
 | 		send_formatted_event(priv, "Disassociate request (ex)", mlme, 0); | 
 | 		break; | 
 |  | 
 | 	case DOT11_OID_ASSOCIATEEX: | 
 | 		handle_request(priv, mlme, oid); | 
 | 		send_formatted_event(priv, "Associate request (ex)", mlme, 1); | 
 |  | 
 | 		if (priv->iw_mode != IW_MODE_MASTER  | 
 | 				&& mlmeex->state != DOT11_STATE_AUTHING) | 
 | 			break; | 
 | 		 | 
 | 		confirm = kmalloc(sizeof(struct obj_mlmeex), GFP_ATOMIC); | 
 |  | 
 | 		if (!confirm) | 
 | 			break; | 
 |  | 
 | 		memcpy(&confirm->address, mlmeex->address, ETH_ALEN); | 
 |  | 
 | 		confirm->id = ((struct obj_mlmeex *)mlme)->id; | 
 | 		confirm->state = 0; /* not used */ | 
 | 		confirm->code = 0; | 
 |  | 
 | 		wpa_ie_len = prism54_wpa_ie_get(priv, mlmeex->address, wpa_ie); | 
 |  | 
 | 		if (!wpa_ie_len) { | 
 | 			printk(KERN_DEBUG "No WPA IE found from " | 
 | 					"address:\t%02x:%02x:%02x:%02x:%02x:%02x\n",  | 
 | 				mlmeex->address[0], | 
 | 				mlmeex->address[1], | 
 | 				mlmeex->address[2], | 
 | 				mlmeex->address[3], | 
 | 				mlmeex->address[4], | 
 | 				mlmeex->address[5] | 
 | 				); | 
 | 			kfree(confirm); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		confirm->size = wpa_ie_len; | 
 | 		memcpy(&confirm->data, wpa_ie, wpa_ie_len); | 
 |  | 
 | 		mgt_set_varlen(priv, oid, confirm, wpa_ie_len); | 
 |  | 
 | 		kfree(confirm); | 
 | 		 | 
 | 		break; | 
 |  | 
 | 	case DOT11_OID_REASSOCIATEEX: | 
 | 		handle_request(priv, mlme, oid); | 
 | 		send_formatted_event(priv, "Reassociate request (ex)", mlme, 1); | 
 |  | 
 | 		if (priv->iw_mode != IW_MODE_MASTER  | 
 | 				&& mlmeex->state != DOT11_STATE_ASSOCING) | 
 | 			break; | 
 |  | 
 | 		confirm = kmalloc(sizeof(struct obj_mlmeex), GFP_ATOMIC); | 
 |  | 
 | 		if (!confirm) | 
 | 			break; | 
 |  | 
 | 		memcpy(&confirm->address, mlmeex->address, ETH_ALEN); | 
 |  | 
 | 		confirm->id = mlmeex->id; | 
 | 		confirm->state = 0; /* not used */ | 
 | 		confirm->code = 0; | 
 |  | 
 | 		wpa_ie_len = prism54_wpa_ie_get(priv, mlmeex->address, wpa_ie); | 
 |  | 
 | 		if (!wpa_ie_len) { | 
 | 			printk(KERN_DEBUG "No WPA IE found from " | 
 | 					"address:\t%02x:%02x:%02x:%02x:%02x:%02x\n",  | 
 | 				mlmeex->address[0], | 
 | 				mlmeex->address[1], | 
 | 				mlmeex->address[2], | 
 | 				mlmeex->address[3], | 
 | 				mlmeex->address[4], | 
 | 				mlmeex->address[5] | 
 | 				); | 
 | 			kfree(confirm); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		confirm->size = wpa_ie_len;  | 
 | 		memcpy(&confirm->data, wpa_ie, wpa_ie_len); | 
 |  | 
 | 		mgt_set_varlen(priv, oid, confirm, wpa_ie_len); | 
 |  | 
 | 		kfree(confirm); | 
 | 		 | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Process a device trap.  This is called via schedule_work(), outside of | 
 |  * interrupt context, no locks held. | 
 |  */ | 
 | void | 
 | prism54_process_trap(void *data) | 
 | { | 
 | 	struct islpci_mgmtframe *frame = data; | 
 | 	struct net_device *ndev = frame->ndev; | 
 | 	enum oid_num_t n = mgt_oidtonum(frame->header->oid); | 
 |  | 
 | 	if (n != OID_NUM_LAST) | 
 | 		prism54_process_trap_helper(netdev_priv(ndev), n, frame->data); | 
 | 	islpci_mgt_release(frame); | 
 | } | 
 |  | 
 | int | 
 | prism54_set_mac_address(struct net_device *ndev, void *addr) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	int ret; | 
 |  | 
 | 	if (ndev->addr_len != 6) | 
 | 		return -EINVAL; | 
 | 	ret = mgt_set_request(priv, GEN_OID_MACADDRESS, 0, | 
 | 			      &((struct sockaddr *) addr)->sa_data); | 
 | 	if (!ret) | 
 | 		memcpy(priv->ndev->dev_addr, | 
 | 		       &((struct sockaddr *) addr)->sa_data, 6); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* Note: currently, use hostapd ioctl from the Host AP driver for WPA | 
 |  * support. This is to be replaced with Linux wireless extensions once they | 
 |  * get WPA support. */ | 
 |  | 
 | /* Note II: please leave all this together as it will be easier to remove later, | 
 |  * once wireless extensions add WPA support -mcgrof */ | 
 |  | 
 | /* PRISM54_HOSTAPD ioctl() cmd: */ | 
 | enum { | 
 | 	PRISM2_SET_ENCRYPTION = 6, | 
 | 	PRISM2_HOSTAPD_SET_GENERIC_ELEMENT = 12, | 
 | 	PRISM2_HOSTAPD_MLME = 13, | 
 | 	PRISM2_HOSTAPD_SCAN_REQ = 14, | 
 | }; | 
 |  | 
 | #define PRISM54_SET_WPA			SIOCIWFIRSTPRIV+12 | 
 | #define PRISM54_HOSTAPD			SIOCIWFIRSTPRIV+25 | 
 | #define PRISM54_DROP_UNENCRYPTED	SIOCIWFIRSTPRIV+26 | 
 |  | 
 | #define PRISM2_HOSTAPD_MAX_BUF_SIZE 1024 | 
 | #define PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN \ | 
 | ((int) (&((struct prism2_hostapd_param *) 0)->u.generic_elem.data)) | 
 |  | 
 | /* Maximum length for algorithm names (-1 for nul termination)  | 
 |  * used in ioctl() */ | 
 | #define HOSTAP_CRYPT_ALG_NAME_LEN 16 | 
 | 	 | 
 | struct prism2_hostapd_param { | 
 | 	u32 cmd; | 
 | 	u8 sta_addr[ETH_ALEN]; | 
 | 	union { | 
 | 	       struct { | 
 | 		       u8 alg[HOSTAP_CRYPT_ALG_NAME_LEN]; | 
 | 		       u32 flags; | 
 | 		       u32 err; | 
 | 		       u8 idx; | 
 | 		       u8 seq[8]; /* sequence counter (set: RX, get: TX) */ | 
 | 		       u16 key_len; | 
 | 		       u8 key[0]; | 
 | 		       } crypt; | 
 |                struct { | 
 |                        u8 len; | 
 |                        u8 data[0]; | 
 |                } generic_elem; | 
 |                struct { | 
 | #define MLME_STA_DEAUTH 0 | 
 | #define MLME_STA_DISASSOC 1 | 
 |                        u16 cmd; | 
 |                        u16 reason_code; | 
 |                } mlme; | 
 |                struct { | 
 |                        u8 ssid_len; | 
 |                        u8 ssid[32]; | 
 |                } scan_req; | 
 |        } u; | 
 | }; | 
 |  | 
 |  | 
 | static int | 
 | prism2_ioctl_set_encryption(struct net_device *dev, | 
 | 	struct prism2_hostapd_param *param, | 
 | 	int param_len) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(dev); | 
 | 	int rvalue = 0, force = 0; | 
 | 	int authen = DOT11_AUTH_OS, invoke = 0, exunencrypt = 0; | 
 | 	union oid_res_t r; | 
 |  | 
 | 	/* with the new API, it's impossible to get a NULL pointer. | 
 | 	 * New version of iwconfig set the IW_ENCODE_NOKEY flag | 
 | 	 * when no key is given, but older versions don't. */ | 
 |  | 
 | 	if (param->u.crypt.key_len > 0) { | 
 | 		/* we have a key to set */ | 
 | 		int index = param->u.crypt.idx; | 
 | 		int current_index; | 
 | 		struct obj_key key = { DOT11_PRIV_TKIP, 0, "" }; | 
 |  | 
 | 		/* get the current key index */ | 
 | 		rvalue = mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r); | 
 | 		current_index = r.u; | 
 | 		/* Verify that the key is not marked as invalid */ | 
 | 		if (!(param->u.crypt.flags & IW_ENCODE_NOKEY)) { | 
 | 			key.length = param->u.crypt.key_len > sizeof (param->u.crypt.key) ? | 
 | 			    sizeof (param->u.crypt.key) : param->u.crypt.key_len; | 
 | 			memcpy(key.key, param->u.crypt.key, key.length); | 
 | 			if (key.length == 32) | 
 | 				/* we want WPA-PSK */ | 
 | 				key.type = DOT11_PRIV_TKIP; | 
 | 			if ((index < 0) || (index > 3)) | 
 | 				/* no index provided use the current one */ | 
 | 				index = current_index; | 
 |  | 
 | 			/* now send the key to the card  */ | 
 | 			rvalue |= | 
 | 			    mgt_set_request(priv, DOT11_OID_DEFKEYX, index, | 
 | 					    &key); | 
 | 		} | 
 | 		/* | 
 | 		 * If a valid key is set, encryption should be enabled  | 
 | 		 * (user may turn it off later). | 
 | 		 * This is also how "iwconfig ethX key on" works | 
 | 		 */ | 
 | 		if ((index == current_index) && (key.length > 0)) | 
 | 			force = 1; | 
 | 	} else { | 
 | 		int index = (param->u.crypt.flags & IW_ENCODE_INDEX) - 1; | 
 | 		if ((index >= 0) && (index <= 3)) { | 
 | 			/* we want to set the key index */ | 
 | 			rvalue |= | 
 | 			    mgt_set_request(priv, DOT11_OID_DEFKEYID, 0, | 
 | 					    &index); | 
 | 		} else { | 
 | 			if (!param->u.crypt.flags & IW_ENCODE_MODE) { | 
 | 				/* we cannot do anything. Complain. */ | 
 | 				return -EINVAL; | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	/* now read the flags */ | 
 | 	if (param->u.crypt.flags & IW_ENCODE_DISABLED) { | 
 | 		/* Encoding disabled,  | 
 | 		 * authen = DOT11_AUTH_OS; | 
 | 		 * invoke = 0; | 
 | 		 * exunencrypt = 0; */ | 
 | 	} | 
 | 	if (param->u.crypt.flags & IW_ENCODE_OPEN) | 
 | 		/* Encode but accept non-encoded packets. No auth */ | 
 | 		invoke = 1; | 
 | 	if ((param->u.crypt.flags & IW_ENCODE_RESTRICTED) || force) { | 
 | 		/* Refuse non-encoded packets. Auth */ | 
 | 		authen = DOT11_AUTH_BOTH; | 
 | 		invoke = 1; | 
 | 		exunencrypt = 1; | 
 | 	} | 
 | 	/* do the change if requested  */ | 
 | 	if ((param->u.crypt.flags & IW_ENCODE_MODE) || force) { | 
 | 		rvalue |= | 
 | 		    mgt_set_request(priv, DOT11_OID_AUTHENABLE, 0, &authen); | 
 | 		rvalue |= | 
 | 		    mgt_set_request(priv, DOT11_OID_PRIVACYINVOKED, 0, &invoke); | 
 | 		rvalue |= | 
 | 		    mgt_set_request(priv, DOT11_OID_EXUNENCRYPTED, 0, | 
 | 				    &exunencrypt); | 
 | 	} | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | static int | 
 | prism2_ioctl_set_generic_element(struct net_device *ndev, | 
 | 	struct prism2_hostapd_param *param, | 
 | 	int param_len) | 
 | { | 
 |        islpci_private *priv = netdev_priv(ndev); | 
 |        int max_len, len, alen, ret=0; | 
 |        struct obj_attachment *attach; | 
 |  | 
 |        len = param->u.generic_elem.len; | 
 |        max_len = param_len - PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN; | 
 |        if (max_len < 0 || max_len < len) | 
 |                return -EINVAL; | 
 |  | 
 |        alen = sizeof(*attach) + len; | 
 |        attach = kmalloc(alen, GFP_KERNEL); | 
 |        if (attach == NULL) | 
 |                return -ENOMEM; | 
 |  | 
 |        memset(attach, 0, alen); | 
 | #define WLAN_FC_TYPE_MGMT 0 | 
 | #define WLAN_FC_STYPE_ASSOC_REQ 0 | 
 | #define WLAN_FC_STYPE_REASSOC_REQ 2 | 
 |  | 
 |        /* Note: endianness is covered by mgt_set_varlen */ | 
 |  | 
 |        attach->type = (WLAN_FC_TYPE_MGMT << 2) | | 
 |                (WLAN_FC_STYPE_ASSOC_REQ << 4); | 
 |        attach->id = -1; | 
 |        attach->size = len; | 
 |        memcpy(attach->data, param->u.generic_elem.data, len); | 
 |  | 
 |        ret = mgt_set_varlen(priv, DOT11_OID_ATTACHMENT, attach, len); | 
 |  | 
 |        if (ret == 0) { | 
 |                attach->type = (WLAN_FC_TYPE_MGMT << 2) | | 
 |                        (WLAN_FC_STYPE_REASSOC_REQ << 4); | 
 |  | 
 | 	       ret = mgt_set_varlen(priv, DOT11_OID_ATTACHMENT, attach, len); | 
 |  | 
 | 	       if (ret == 0)  | 
 | 		       printk(KERN_DEBUG "%s: WPA IE Attachment was set\n", | 
 | 				       ndev->name); | 
 |        } | 
 |  | 
 |        kfree(attach); | 
 |        return ret; | 
 |  | 
 | } | 
 |  | 
 | static int | 
 | prism2_ioctl_mlme(struct net_device *dev, struct prism2_hostapd_param *param) | 
 | { | 
 | 	return -EOPNOTSUPP; | 
 | } | 
 |  | 
 | static int | 
 | prism2_ioctl_scan_req(struct net_device *ndev, | 
 |                      struct prism2_hostapd_param *param) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	int i, rvalue; | 
 | 	struct obj_bsslist *bsslist; | 
 | 	u32 noise = 0; | 
 | 	char *extra = ""; | 
 | 	char *current_ev = "foo"; | 
 | 	union oid_res_t r; | 
 |  | 
 | 	if (islpci_get_state(priv) < PRV_STATE_INIT) { | 
 | 		/* device is not ready, fail gently */ | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* first get the noise value. We will use it to report the link quality */ | 
 | 	rvalue = mgt_get_request(priv, DOT11_OID_NOISEFLOOR, 0, NULL, &r); | 
 | 	noise = r.u; | 
 |  | 
 | 	/* Ask the device for a list of known bss. We can report at most | 
 | 	 * IW_MAX_AP=64 to the range struct. But the device won't repport anything | 
 | 	 * if you change the value of IWMAX_BSS=24. | 
 | 	 */ | 
 | 	rvalue |= mgt_get_request(priv, DOT11_OID_BSSLIST, 0, NULL, &r); | 
 | 	bsslist = r.ptr; | 
 |  | 
 | 	/* ok now, scan the list and translate its info */ | 
 | 	for (i = 0; i < min(IW_MAX_AP, (int) bsslist->nr); i++) | 
 | 		current_ev = prism54_translate_bss(ndev, current_ev, | 
 | 						   extra + IW_SCAN_MAX_DATA, | 
 | 						   &(bsslist->bsslist[i]), | 
 | 						   noise); | 
 | 	kfree(bsslist); | 
 |  | 
 | 	return rvalue; | 
 | } | 
 |  | 
 | static int | 
 | prism54_hostapd(struct net_device *ndev, struct iw_point *p) | 
 | { | 
 |        struct prism2_hostapd_param *param; | 
 |        int ret = 0; | 
 |        u32 uwrq; | 
 |  | 
 |        printk(KERN_DEBUG "prism54_hostapd - len=%d\n", p->length); | 
 |        if (p->length < sizeof(struct prism2_hostapd_param) || | 
 |            p->length > PRISM2_HOSTAPD_MAX_BUF_SIZE || !p->pointer) | 
 |                return -EINVAL; | 
 |  | 
 |        param = (struct prism2_hostapd_param *) kmalloc(p->length, GFP_KERNEL); | 
 |        if (param == NULL) | 
 |                return -ENOMEM; | 
 |  | 
 |        if (copy_from_user(param, p->pointer, p->length)) { | 
 |                kfree(param); | 
 |                return -EFAULT; | 
 |        } | 
 |  | 
 |        switch (param->cmd) { | 
 |        case PRISM2_SET_ENCRYPTION: | 
 | 	       printk(KERN_DEBUG "%s: Caught WPA supplicant set encryption request\n", | 
 | 			       ndev->name); | 
 |                ret = prism2_ioctl_set_encryption(ndev, param, p->length); | 
 |                break; | 
 |        case PRISM2_HOSTAPD_SET_GENERIC_ELEMENT: | 
 | 	       printk(KERN_DEBUG "%s: Caught WPA supplicant set WPA IE request\n", | 
 | 			       ndev->name); | 
 |                ret = prism2_ioctl_set_generic_element(ndev, param, | 
 |                                                       p->length); | 
 |                break; | 
 |        case PRISM2_HOSTAPD_MLME: | 
 | 	       printk(KERN_DEBUG "%s: Caught WPA supplicant MLME request\n", | 
 | 			       ndev->name); | 
 |                ret = prism2_ioctl_mlme(ndev, param); | 
 |                break; | 
 |        case PRISM2_HOSTAPD_SCAN_REQ: | 
 | 	       printk(KERN_DEBUG "%s: Caught WPA supplicant scan request\n", | 
 | 			       ndev->name); | 
 |                ret = prism2_ioctl_scan_req(ndev, param); | 
 |                break; | 
 | 	case PRISM54_SET_WPA: | 
 | 	       printk(KERN_DEBUG "%s: Caught WPA supplicant wpa init request\n", | 
 | 			       ndev->name); | 
 | 	       uwrq = 1; | 
 | 	       ret = prism54_set_wpa(ndev, NULL, &uwrq, NULL); | 
 | 	       break; | 
 | 	case PRISM54_DROP_UNENCRYPTED: | 
 | 	       printk(KERN_DEBUG "%s: Caught WPA drop unencrypted request\n", | 
 | 			       ndev->name); | 
 | #if 0 | 
 | 	       uwrq = 0x01; | 
 | 	       mgt_set(priv, DOT11_OID_EXUNENCRYPTED, &uwrq); | 
 | 	       down_write(&priv->mib_sem); | 
 | 	       mgt_commit(priv); | 
 | 	       up_write(&priv->mib_sem); | 
 | #endif | 
 | 	       /* Not necessary, as set_wpa does it, should we just do it here though? */ | 
 | 	       ret = 0; | 
 | 	       break; | 
 |        default: | 
 | 	       printk(KERN_DEBUG "%s: Caught a WPA supplicant request that is not supported\n", | 
 | 			       ndev->name); | 
 |                ret = -EOPNOTSUPP; | 
 |                break; | 
 |        } | 
 |  | 
 |        if (ret == 0 && copy_to_user(p->pointer, param, p->length)) | 
 |                ret = -EFAULT; | 
 |  | 
 |        kfree(param); | 
 |  | 
 |        return ret; | 
 | } | 
 |  | 
 | static int | 
 | prism54_set_wpa(struct net_device *ndev, struct iw_request_info *info, | 
 | 		__u32 * uwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	u32 mlme, authen, dot1x, filter, wep; | 
 |  | 
 | 	if (islpci_get_state(priv) < PRV_STATE_INIT) | 
 | 		return 0; | 
 |  | 
 | 	wep = 1; /* For privacy invoked */ | 
 | 	filter = 1; /* Filter out all unencrypted frames */ | 
 | 	dot1x = 0x01; /* To enable eap filter */ | 
 | 	mlme = DOT11_MLME_EXTENDED; | 
 | 	authen = DOT11_AUTH_OS; /* Only WEP uses _SK and _BOTH */ | 
 |  | 
 | 	down_write(&priv->mib_sem); | 
 | 	priv->wpa = *uwrq; | 
 |  | 
 | 	switch (priv->wpa) { | 
 | 		default: | 
 | 		case 0: /* Clears/disables WPA and friends */ | 
 | 			wep = 0; | 
 | 			filter = 0; /* Do not filter un-encrypted data */ | 
 | 			dot1x = 0; | 
 | 			mlme = DOT11_MLME_AUTO; | 
 | 			printk("%s: Disabling WPA\n", ndev->name); | 
 | 			break; | 
 | 		case 2:  | 
 | 		case 1: /* WPA */ | 
 | 			printk("%s: Enabling WPA\n", ndev->name); | 
 | 			break; | 
 | 	} | 
 | 	up_write(&priv->mib_sem); | 
 |  | 
 | 	mgt_set_request(priv, DOT11_OID_AUTHENABLE, 0, &authen); | 
 | 	mgt_set_request(priv, DOT11_OID_PRIVACYINVOKED, 0, &wep); | 
 | 	mgt_set_request(priv, DOT11_OID_EXUNENCRYPTED, 0, &filter); | 
 | 	mgt_set_request(priv, DOT11_OID_DOT1XENABLE, 0, &dot1x); | 
 | 	mgt_set_request(priv, DOT11_OID_MLMEAUTOLEVEL, 0, &mlme); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | prism54_get_wpa(struct net_device *ndev, struct iw_request_info *info, | 
 | 		__u32 * uwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	*uwrq = priv->wpa; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | prism54_set_prismhdr(struct net_device *ndev, struct iw_request_info *info, | 
 | 		     __u32 * uwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	priv->monitor_type = | 
 | 	    (*uwrq ? ARPHRD_IEEE80211_PRISM : ARPHRD_IEEE80211); | 
 | 	if (priv->iw_mode == IW_MODE_MONITOR) | 
 | 		priv->ndev->type = priv->monitor_type; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | prism54_get_prismhdr(struct net_device *ndev, struct iw_request_info *info, | 
 | 		     __u32 * uwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	*uwrq = (priv->monitor_type == ARPHRD_IEEE80211_PRISM); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | prism54_debug_oid(struct net_device *ndev, struct iw_request_info *info, | 
 | 		  __u32 * uwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 |  | 
 | 	priv->priv_oid = *uwrq; | 
 | 	printk("%s: oid 0x%08X\n", ndev->name, *uwrq); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | prism54_debug_get_oid(struct net_device *ndev, struct iw_request_info *info, | 
 | 		      struct iw_point *data, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	struct islpci_mgmtframe *response; | 
 | 	int ret = -EIO; | 
 |  | 
 | 	printk("%s: get_oid 0x%08X\n", ndev->name, priv->priv_oid); | 
 | 	data->length = 0; | 
 |  | 
 | 	if (islpci_get_state(priv) >= PRV_STATE_INIT) { | 
 | 		ret = | 
 | 		    islpci_mgt_transaction(priv->ndev, PIMFOR_OP_GET, | 
 | 					   priv->priv_oid, extra, 256, | 
 | 					   &response); | 
 | 		printk("%s: ret: %i\n", ndev->name, ret); | 
 | 		if (ret || !response | 
 | 		    || response->header->operation == PIMFOR_OP_ERROR) { | 
 | 			if (response) { | 
 | 				islpci_mgt_release(response); | 
 | 			} | 
 | 			printk("%s: EIO\n", ndev->name); | 
 | 			ret = -EIO; | 
 | 		} | 
 | 		if (!ret) { | 
 | 			data->length = response->header->length; | 
 | 			memcpy(extra, response->data, data->length); | 
 | 			islpci_mgt_release(response); | 
 | 			printk("%s: len: %i\n", ndev->name, data->length); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int | 
 | prism54_debug_set_oid(struct net_device *ndev, struct iw_request_info *info, | 
 | 		      struct iw_point *data, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	struct islpci_mgmtframe *response; | 
 | 	int ret = 0, response_op = PIMFOR_OP_ERROR; | 
 |  | 
 | 	printk("%s: set_oid 0x%08X\tlen: %d\n", ndev->name, priv->priv_oid, | 
 | 	       data->length); | 
 |  | 
 | 	if (islpci_get_state(priv) >= PRV_STATE_INIT) { | 
 | 		ret = | 
 | 		    islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET, | 
 | 					   priv->priv_oid, extra, data->length, | 
 | 					   &response); | 
 | 		printk("%s: ret: %i\n", ndev->name, ret); | 
 | 		if (ret || !response | 
 | 		    || response->header->operation == PIMFOR_OP_ERROR) { | 
 | 			if (response) { | 
 | 				islpci_mgt_release(response); | 
 | 			} | 
 | 			printk("%s: EIO\n", ndev->name); | 
 | 			ret = -EIO; | 
 | 		} | 
 | 		if (!ret) { | 
 | 			response_op = response->header->operation; | 
 | 			printk("%s: response_op: %i\n", ndev->name, | 
 | 			       response_op); | 
 | 			islpci_mgt_release(response); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return (ret ? ret : -EINPROGRESS); | 
 | } | 
 |  | 
 | static int | 
 | prism54_set_spy(struct net_device *ndev, | 
 | 		struct iw_request_info *info, | 
 | 		union iwreq_data *uwrq, char *extra) | 
 | { | 
 | 	islpci_private *priv = netdev_priv(ndev); | 
 | 	u32 u, oid = OID_INL_CONFIG; | 
 |  | 
 | 	down_write(&priv->mib_sem); | 
 | 	mgt_get(priv, OID_INL_CONFIG, &u); | 
 |  | 
 | 	if ((uwrq->data.length == 0) && (priv->spy_data.spy_number > 0)) | 
 | 		/* disable spy */ | 
 | 		u &= ~INL_CONFIG_RXANNEX; | 
 | 	else if ((uwrq->data.length > 0) && (priv->spy_data.spy_number == 0)) | 
 | 		/* enable spy */ | 
 | 		u |= INL_CONFIG_RXANNEX; | 
 |  | 
 | 	mgt_set(priv, OID_INL_CONFIG, &u); | 
 | 	mgt_commit_list(priv, &oid, 1); | 
 | 	up_write(&priv->mib_sem); | 
 |  | 
 | 	return iw_handler_set_spy(ndev, info, uwrq, extra); | 
 | } | 
 |  | 
 | static const iw_handler prism54_handler[] = { | 
 | 	(iw_handler) prism54_commit,	/* SIOCSIWCOMMIT */ | 
 | 	(iw_handler) prism54_get_name,	/* SIOCGIWNAME */ | 
 | 	(iw_handler) NULL,	/* SIOCSIWNWID */ | 
 | 	(iw_handler) NULL,	/* SIOCGIWNWID */ | 
 | 	(iw_handler) prism54_set_freq,	/* SIOCSIWFREQ */ | 
 | 	(iw_handler) prism54_get_freq,	/* SIOCGIWFREQ */ | 
 | 	(iw_handler) prism54_set_mode,	/* SIOCSIWMODE */ | 
 | 	(iw_handler) prism54_get_mode,	/* SIOCGIWMODE */ | 
 | 	(iw_handler) prism54_set_sens,	/* SIOCSIWSENS */ | 
 | 	(iw_handler) prism54_get_sens,	/* SIOCGIWSENS */ | 
 | 	(iw_handler) NULL,	/* SIOCSIWRANGE */ | 
 | 	(iw_handler) prism54_get_range,	/* SIOCGIWRANGE */ | 
 | 	(iw_handler) NULL,	/* SIOCSIWPRIV */ | 
 | 	(iw_handler) NULL,	/* SIOCGIWPRIV */ | 
 | 	(iw_handler) NULL,	/* SIOCSIWSTATS */ | 
 | 	(iw_handler) NULL,	/* SIOCGIWSTATS */ | 
 | 	prism54_set_spy,	/* SIOCSIWSPY */ | 
 | 	iw_handler_get_spy,	/* SIOCGIWSPY */ | 
 | 	iw_handler_set_thrspy,	/* SIOCSIWTHRSPY */ | 
 | 	iw_handler_get_thrspy,	/* SIOCGIWTHRSPY */ | 
 | 	(iw_handler) prism54_set_wap,	/* SIOCSIWAP */ | 
 | 	(iw_handler) prism54_get_wap,	/* SIOCGIWAP */ | 
 | 	(iw_handler) NULL,	/* -- hole -- */ | 
 | 	(iw_handler) NULL,	/* SIOCGIWAPLIST depreciated */ | 
 | 	(iw_handler) prism54_set_scan,	/* SIOCSIWSCAN */ | 
 | 	(iw_handler) prism54_get_scan,	/* SIOCGIWSCAN */ | 
 | 	(iw_handler) prism54_set_essid,	/* SIOCSIWESSID */ | 
 | 	(iw_handler) prism54_get_essid,	/* SIOCGIWESSID */ | 
 | 	(iw_handler) prism54_set_nick,	/* SIOCSIWNICKN */ | 
 | 	(iw_handler) prism54_get_nick,	/* SIOCGIWNICKN */ | 
 | 	(iw_handler) NULL,	/* -- hole -- */ | 
 | 	(iw_handler) NULL,	/* -- hole -- */ | 
 | 	(iw_handler) prism54_set_rate,	/* SIOCSIWRATE */ | 
 | 	(iw_handler) prism54_get_rate,	/* SIOCGIWRATE */ | 
 | 	(iw_handler) prism54_set_rts,	/* SIOCSIWRTS */ | 
 | 	(iw_handler) prism54_get_rts,	/* SIOCGIWRTS */ | 
 | 	(iw_handler) prism54_set_frag,	/* SIOCSIWFRAG */ | 
 | 	(iw_handler) prism54_get_frag,	/* SIOCGIWFRAG */ | 
 | 	(iw_handler) prism54_set_txpower,	/* SIOCSIWTXPOW */ | 
 | 	(iw_handler) prism54_get_txpower,	/* SIOCGIWTXPOW */ | 
 | 	(iw_handler) prism54_set_retry,	/* SIOCSIWRETRY */ | 
 | 	(iw_handler) prism54_get_retry,	/* SIOCGIWRETRY */ | 
 | 	(iw_handler) prism54_set_encode,	/* SIOCSIWENCODE */ | 
 | 	(iw_handler) prism54_get_encode,	/* SIOCGIWENCODE */ | 
 | 	(iw_handler) NULL,	/* SIOCSIWPOWER */ | 
 | 	(iw_handler) NULL,	/* SIOCGIWPOWER */ | 
 | }; | 
 |  | 
 | /* The low order bit identify a SET (0) or a GET (1) ioctl.  */ | 
 |  | 
 | #define PRISM54_RESET		SIOCIWFIRSTPRIV | 
 | #define PRISM54_GET_POLICY	SIOCIWFIRSTPRIV+1 | 
 | #define PRISM54_SET_POLICY	SIOCIWFIRSTPRIV+2 | 
 | #define PRISM54_GET_MAC		SIOCIWFIRSTPRIV+3 | 
 | #define PRISM54_ADD_MAC		SIOCIWFIRSTPRIV+4 | 
 |  | 
 | #define PRISM54_DEL_MAC		SIOCIWFIRSTPRIV+6 | 
 |  | 
 | #define PRISM54_KICK_MAC	SIOCIWFIRSTPRIV+8 | 
 |  | 
 | #define PRISM54_KICK_ALL	SIOCIWFIRSTPRIV+10 | 
 |  | 
 | #define PRISM54_GET_WPA		SIOCIWFIRSTPRIV+11 | 
 | #define PRISM54_SET_WPA		SIOCIWFIRSTPRIV+12 | 
 |  | 
 | #define PRISM54_DBG_OID		SIOCIWFIRSTPRIV+14 | 
 | #define PRISM54_DBG_GET_OID	SIOCIWFIRSTPRIV+15 | 
 | #define PRISM54_DBG_SET_OID	SIOCIWFIRSTPRIV+16 | 
 |  | 
 | #define PRISM54_GET_OID		SIOCIWFIRSTPRIV+17 | 
 | #define PRISM54_SET_OID_U32	SIOCIWFIRSTPRIV+18 | 
 | #define	PRISM54_SET_OID_STR	SIOCIWFIRSTPRIV+20 | 
 | #define	PRISM54_SET_OID_ADDR	SIOCIWFIRSTPRIV+22 | 
 |  | 
 | #define PRISM54_GET_PRISMHDR	SIOCIWFIRSTPRIV+23 | 
 | #define PRISM54_SET_PRISMHDR	SIOCIWFIRSTPRIV+24 | 
 |  | 
 | #define IWPRIV_SET_U32(n,x)	{ n, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "s_"x } | 
 | #define IWPRIV_SET_SSID(n,x)	{ n, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 1, 0, "s_"x } | 
 | #define IWPRIV_SET_ADDR(n,x)	{ n, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "s_"x } | 
 | #define IWPRIV_GET(n,x)	{ n, 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | PRIV_STR_SIZE, "g_"x } | 
 |  | 
 | #define IWPRIV_U32(n,x)		IWPRIV_SET_U32(n,x), IWPRIV_GET(n,x) | 
 | #define IWPRIV_SSID(n,x)	IWPRIV_SET_SSID(n,x), IWPRIV_GET(n,x) | 
 | #define IWPRIV_ADDR(n,x)	IWPRIV_SET_ADDR(n,x), IWPRIV_GET(n,x) | 
 |  | 
 | /* Note : limited to 128 private ioctls (wireless tools 26) */ | 
 |  | 
 | static const struct iw_priv_args prism54_private_args[] = { | 
 | /*{ cmd, set_args, get_args, name } */ | 
 | 	{PRISM54_RESET, 0, 0, "reset"}, | 
 | 	{PRISM54_GET_PRISMHDR, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, | 
 | 	 "get_prismhdr"}, | 
 | 	{PRISM54_SET_PRISMHDR, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, | 
 | 	 "set_prismhdr"}, | 
 | 	{PRISM54_GET_POLICY, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, | 
 | 	 "getPolicy"}, | 
 | 	{PRISM54_SET_POLICY, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, | 
 | 	 "setPolicy"}, | 
 | 	{PRISM54_GET_MAC, 0, IW_PRIV_TYPE_ADDR | 64, "getMac"}, | 
 | 	{PRISM54_ADD_MAC, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, | 
 | 	 "addMac"}, | 
 | 	{PRISM54_DEL_MAC, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, | 
 | 	 "delMac"}, | 
 | 	{PRISM54_KICK_MAC, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, | 
 | 	 "kickMac"}, | 
 | 	{PRISM54_KICK_ALL, 0, 0, "kickAll"}, | 
 | 	{PRISM54_GET_WPA, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, | 
 | 	 "get_wpa"}, | 
 | 	{PRISM54_SET_WPA, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, | 
 | 	 "set_wpa"}, | 
 | 	{PRISM54_DBG_OID, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, | 
 | 	 "dbg_oid"}, | 
 | 	{PRISM54_DBG_GET_OID, 0, IW_PRIV_TYPE_BYTE | 256, "dbg_get_oid"}, | 
 | 	{PRISM54_DBG_SET_OID, IW_PRIV_TYPE_BYTE | 256, 0, "dbg_set_oid"}, | 
 | 	/* --- sub-ioctls handlers --- */ | 
 | 	{PRISM54_GET_OID, | 
 | 	 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | PRIV_STR_SIZE, ""}, | 
 | 	{PRISM54_SET_OID_U32, | 
 | 	 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, ""}, | 
 | 	{PRISM54_SET_OID_STR, | 
 | 	 IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 1, 0, ""}, | 
 | 	{PRISM54_SET_OID_ADDR, | 
 | 	 IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, ""}, | 
 | 	/* --- sub-ioctls definitions --- */ | 
 | 	IWPRIV_ADDR(GEN_OID_MACADDRESS, "addr"), | 
 | 	IWPRIV_GET(GEN_OID_LINKSTATE, "linkstate"), | 
 | 	IWPRIV_U32(DOT11_OID_BSSTYPE, "bsstype"), | 
 | 	IWPRIV_ADDR(DOT11_OID_BSSID, "bssid"), | 
 | 	IWPRIV_U32(DOT11_OID_STATE, "state"), | 
 | 	IWPRIV_U32(DOT11_OID_AID, "aid"), | 
 |  | 
 | 	IWPRIV_SSID(DOT11_OID_SSIDOVERRIDE, "ssidoverride"), | 
 |  | 
 | 	IWPRIV_U32(DOT11_OID_MEDIUMLIMIT, "medlimit"), | 
 | 	IWPRIV_U32(DOT11_OID_BEACONPERIOD, "beacon"), | 
 | 	IWPRIV_U32(DOT11_OID_DTIMPERIOD, "dtimperiod"), | 
 |  | 
 | 	IWPRIV_U32(DOT11_OID_AUTHENABLE, "authenable"), | 
 | 	IWPRIV_U32(DOT11_OID_PRIVACYINVOKED, "privinvok"), | 
 | 	IWPRIV_U32(DOT11_OID_EXUNENCRYPTED, "exunencrypt"), | 
 |  | 
 | 	IWPRIV_U32(DOT11_OID_REKEYTHRESHOLD, "rekeythresh"), | 
 |  | 
 | 	IWPRIV_U32(DOT11_OID_MAXTXLIFETIME, "maxtxlife"), | 
 | 	IWPRIV_U32(DOT11_OID_MAXRXLIFETIME, "maxrxlife"), | 
 | 	IWPRIV_U32(DOT11_OID_ALOFT_FIXEDRATE, "fixedrate"), | 
 | 	IWPRIV_U32(DOT11_OID_MAXFRAMEBURST, "frameburst"), | 
 | 	IWPRIV_U32(DOT11_OID_PSM, "psm"), | 
 |  | 
 | 	IWPRIV_U32(DOT11_OID_BRIDGELOCAL, "bridge"), | 
 | 	IWPRIV_U32(DOT11_OID_CLIENTS, "clients"), | 
 | 	IWPRIV_U32(DOT11_OID_CLIENTSASSOCIATED, "clientassoc"), | 
 | 	IWPRIV_U32(DOT11_OID_DOT1XENABLE, "dot1xenable"), | 
 | 	IWPRIV_U32(DOT11_OID_ANTENNARX, "rxant"), | 
 | 	IWPRIV_U32(DOT11_OID_ANTENNATX, "txant"), | 
 | 	IWPRIV_U32(DOT11_OID_ANTENNADIVERSITY, "antdivers"), | 
 | 	IWPRIV_U32(DOT11_OID_EDTHRESHOLD, "edthresh"), | 
 | 	IWPRIV_U32(DOT11_OID_PREAMBLESETTINGS, "preamble"), | 
 | 	IWPRIV_GET(DOT11_OID_RATES, "rates"), | 
 | 	IWPRIV_U32(DOT11_OID_OUTPUTPOWER, ".11outpower"), | 
 | 	IWPRIV_GET(DOT11_OID_SUPPORTEDRATES, "supprates"), | 
 | 	IWPRIV_GET(DOT11_OID_SUPPORTEDFREQUENCIES, "suppfreq"), | 
 |  | 
 | 	IWPRIV_U32(DOT11_OID_NOISEFLOOR, "noisefloor"), | 
 | 	IWPRIV_GET(DOT11_OID_FREQUENCYACTIVITY, "freqactivity"), | 
 | 	IWPRIV_U32(DOT11_OID_NONERPPROTECTION, "nonerpprotec"), | 
 | 	IWPRIV_U32(DOT11_OID_PROFILES, "profile"), | 
 | 	IWPRIV_GET(DOT11_OID_EXTENDEDRATES, "extrates"), | 
 | 	IWPRIV_U32(DOT11_OID_MLMEAUTOLEVEL, "mlmelevel"), | 
 |  | 
 | 	IWPRIV_GET(DOT11_OID_BSSS, "bsss"), | 
 | 	IWPRIV_GET(DOT11_OID_BSSLIST, "bsslist"), | 
 | 	IWPRIV_U32(OID_INL_MODE, "mode"), | 
 | 	IWPRIV_U32(OID_INL_CONFIG, "config"), | 
 | 	IWPRIV_U32(OID_INL_DOT11D_CONFORMANCE, ".11dconform"), | 
 | 	IWPRIV_GET(OID_INL_PHYCAPABILITIES, "phycapa"), | 
 | 	IWPRIV_U32(OID_INL_OUTPUTPOWER, "outpower"), | 
 | }; | 
 |  | 
 | static const iw_handler prism54_private_handler[] = { | 
 | 	(iw_handler) prism54_reset, | 
 | 	(iw_handler) prism54_get_policy, | 
 | 	(iw_handler) prism54_set_policy, | 
 | 	(iw_handler) prism54_get_mac, | 
 | 	(iw_handler) prism54_add_mac, | 
 | 	(iw_handler) NULL, | 
 | 	(iw_handler) prism54_del_mac, | 
 | 	(iw_handler) NULL, | 
 | 	(iw_handler) prism54_kick_mac, | 
 | 	(iw_handler) NULL, | 
 | 	(iw_handler) prism54_kick_all, | 
 | 	(iw_handler) prism54_get_wpa, | 
 | 	(iw_handler) prism54_set_wpa, | 
 | 	(iw_handler) NULL, | 
 | 	(iw_handler) prism54_debug_oid, | 
 | 	(iw_handler) prism54_debug_get_oid, | 
 | 	(iw_handler) prism54_debug_set_oid, | 
 | 	(iw_handler) prism54_get_oid, | 
 | 	(iw_handler) prism54_set_u32, | 
 | 	(iw_handler) NULL, | 
 | 	(iw_handler) prism54_set_raw, | 
 | 	(iw_handler) NULL, | 
 | 	(iw_handler) prism54_set_raw, | 
 | 	(iw_handler) prism54_get_prismhdr, | 
 | 	(iw_handler) prism54_set_prismhdr, | 
 | }; | 
 |  | 
 | const struct iw_handler_def prism54_handler_def = { | 
 | 	.num_standard = sizeof (prism54_handler) / sizeof (iw_handler), | 
 | 	.num_private = sizeof (prism54_private_handler) / sizeof (iw_handler), | 
 | 	.num_private_args = | 
 | 	    sizeof (prism54_private_args) / sizeof (struct iw_priv_args), | 
 | 	.standard = (iw_handler *) prism54_handler, | 
 | 	.private = (iw_handler *) prism54_private_handler, | 
 | 	.private_args = (struct iw_priv_args *) prism54_private_args, | 
 | #if WIRELESS_EXT > 16 | 
 | 	.get_wireless_stats = prism54_get_wireless_stats, | 
 | #endif /* WIRELESS_EXT > 16 */ | 
 | #if WIRELESS_EXT == 16 | 
 | 	.spy_offset = offsetof(islpci_private, spy_data), | 
 | #endif /* WIRELESS_EXT == 16 */ | 
 | }; | 
 |  | 
 | /* For wpa_supplicant */ | 
 |  | 
 | int | 
 | prism54_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) | 
 | { | 
 | 	struct iwreq *wrq = (struct iwreq *) rq; | 
 | 	int ret = -1; | 
 | 	switch (cmd) { | 
 | 		case PRISM54_HOSTAPD: | 
 | 		if (!capable(CAP_NET_ADMIN)) | 
 | 		return -EPERM; | 
 | 		ret = prism54_hostapd(ndev, &wrq->u.data); | 
 | 		return ret; | 
 | 	} | 
 | 	return -EOPNOTSUPP; | 
 | } |