|  | /* | 
|  | * This file is subject to the terms and conditions of the GNU General Public | 
|  | * License.  See the file "COPYING" in the main directory of this archive | 
|  | * for more details. | 
|  | * | 
|  | * Copyright (C) 2005-2009, 2010 Cavium Networks | 
|  | */ | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/msi.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/interrupt.h> | 
|  |  | 
|  | #include <asm/octeon/octeon.h> | 
|  | #include <asm/octeon/cvmx-npi-defs.h> | 
|  | #include <asm/octeon/cvmx-pci-defs.h> | 
|  | #include <asm/octeon/cvmx-npei-defs.h> | 
|  | #include <asm/octeon/cvmx-sli-defs.h> | 
|  | #include <asm/octeon/cvmx-pexp-defs.h> | 
|  | #include <asm/octeon/pci-octeon.h> | 
|  |  | 
|  | /* | 
|  | * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is | 
|  | * in use. | 
|  | */ | 
|  | static u64 msi_free_irq_bitmask[4]; | 
|  |  | 
|  | /* | 
|  | * Each bit in msi_multiple_irq_bitmask tells that the device using | 
|  | * this bit in msi_free_irq_bitmask is also using the next bit. This | 
|  | * is used so we can disable all of the MSI interrupts when a device | 
|  | * uses multiple. | 
|  | */ | 
|  | static u64 msi_multiple_irq_bitmask[4]; | 
|  |  | 
|  | /* | 
|  | * This lock controls updates to msi_free_irq_bitmask and | 
|  | * msi_multiple_irq_bitmask. | 
|  | */ | 
|  | static DEFINE_SPINLOCK(msi_free_irq_bitmask_lock); | 
|  |  | 
|  | /* | 
|  | * Number of MSI IRQs used. This variable is set up in | 
|  | * the module init time. | 
|  | */ | 
|  | static int msi_irq_size; | 
|  |  | 
|  | /** | 
|  | * Called when a driver request MSI interrupts instead of the | 
|  | * legacy INT A-D. This routine will allocate multiple interrupts | 
|  | * for MSI devices that support them. A device can override this by | 
|  | * programming the MSI control bits [6:4] before calling | 
|  | * pci_enable_msi(). | 
|  | * | 
|  | * @dev:    Device requesting MSI interrupts | 
|  | * @desc:   MSI descriptor | 
|  | * | 
|  | * Returns 0 on success. | 
|  | */ | 
|  | int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) | 
|  | { | 
|  | struct msi_msg msg; | 
|  | u16 control; | 
|  | int configured_private_bits; | 
|  | int request_private_bits; | 
|  | int irq = 0; | 
|  | int irq_step; | 
|  | u64 search_mask; | 
|  | int index; | 
|  |  | 
|  | /* | 
|  | * Read the MSI config to figure out how many IRQs this device | 
|  | * wants.  Most devices only want 1, which will give | 
|  | * configured_private_bits and request_private_bits equal 0. | 
|  | */ | 
|  | pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control); | 
|  |  | 
|  | /* | 
|  | * If the number of private bits has been configured then use | 
|  | * that value instead of the requested number. This gives the | 
|  | * driver the chance to override the number of interrupts | 
|  | * before calling pci_enable_msi(). | 
|  | */ | 
|  | configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; | 
|  | if (configured_private_bits == 0) { | 
|  | /* Nothing is configured, so use the hardware requested size */ | 
|  | request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1; | 
|  | } else { | 
|  | /* | 
|  | * Use the number of configured bits, assuming the | 
|  | * driver wanted to override the hardware request | 
|  | * value. | 
|  | */ | 
|  | request_private_bits = configured_private_bits; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The PCI 2.3 spec mandates that there are at most 32 | 
|  | * interrupts. If this device asks for more, only give it one. | 
|  | */ | 
|  | if (request_private_bits > 5) | 
|  | request_private_bits = 0; | 
|  |  | 
|  | try_only_one: | 
|  | /* | 
|  | * The IRQs have to be aligned on a power of two based on the | 
|  | * number being requested. | 
|  | */ | 
|  | irq_step = 1 << request_private_bits; | 
|  |  | 
|  | /* Mask with one bit for each IRQ */ | 
|  | search_mask = (1 << irq_step) - 1; | 
|  |  | 
|  | /* | 
|  | * We're going to search msi_free_irq_bitmask_lock for zero | 
|  | * bits. This represents an MSI interrupt number that isn't in | 
|  | * use. | 
|  | */ | 
|  | spin_lock(&msi_free_irq_bitmask_lock); | 
|  | for (index = 0; index < msi_irq_size/64; index++) { | 
|  | for (irq = 0; irq < 64; irq += irq_step) { | 
|  | if ((msi_free_irq_bitmask[index] & (search_mask << irq)) == 0) { | 
|  | msi_free_irq_bitmask[index] |= search_mask << irq; | 
|  | msi_multiple_irq_bitmask[index] |= (search_mask >> 1) << irq; | 
|  | goto msi_irq_allocated; | 
|  | } | 
|  | } | 
|  | } | 
|  | msi_irq_allocated: | 
|  | spin_unlock(&msi_free_irq_bitmask_lock); | 
|  |  | 
|  | /* Make sure the search for available interrupts didn't fail */ | 
|  | if (irq >= 64) { | 
|  | if (request_private_bits) { | 
|  | pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one", | 
|  | 1 << request_private_bits); | 
|  | request_private_bits = 0; | 
|  | goto try_only_one; | 
|  | } else | 
|  | panic("arch_setup_msi_irq: Unable to find a free MSI interrupt"); | 
|  | } | 
|  |  | 
|  | /* MSI interrupts start at logical IRQ OCTEON_IRQ_MSI_BIT0 */ | 
|  | irq += index*64; | 
|  | irq += OCTEON_IRQ_MSI_BIT0; | 
|  |  | 
|  | switch (octeon_dma_bar_type) { | 
|  | case OCTEON_DMA_BAR_TYPE_SMALL: | 
|  | /* When not using big bar, Bar 0 is based at 128MB */ | 
|  | msg.address_lo = | 
|  | ((128ul << 20) + CVMX_PCI_MSI_RCV) & 0xffffffff; | 
|  | msg.address_hi = ((128ul << 20) + CVMX_PCI_MSI_RCV) >> 32; | 
|  | break; | 
|  | case OCTEON_DMA_BAR_TYPE_BIG: | 
|  | /* When using big bar, Bar 0 is based at 0 */ | 
|  | msg.address_lo = (0 + CVMX_PCI_MSI_RCV) & 0xffffffff; | 
|  | msg.address_hi = (0 + CVMX_PCI_MSI_RCV) >> 32; | 
|  | break; | 
|  | case OCTEON_DMA_BAR_TYPE_PCIE: | 
|  | /* When using PCIe, Bar 0 is based at 0 */ | 
|  | /* FIXME CVMX_NPEI_MSI_RCV* other than 0? */ | 
|  | msg.address_lo = (0 + CVMX_NPEI_PCIE_MSI_RCV) & 0xffffffff; | 
|  | msg.address_hi = (0 + CVMX_NPEI_PCIE_MSI_RCV) >> 32; | 
|  | break; | 
|  | case OCTEON_DMA_BAR_TYPE_PCIE2: | 
|  | /* When using PCIe2, Bar 0 is based at 0 */ | 
|  | msg.address_lo = (0 + CVMX_SLI_PCIE_MSI_RCV) & 0xffffffff; | 
|  | msg.address_hi = (0 + CVMX_SLI_PCIE_MSI_RCV) >> 32; | 
|  | break; | 
|  | default: | 
|  | panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type"); | 
|  | } | 
|  | msg.data = irq - OCTEON_IRQ_MSI_BIT0; | 
|  |  | 
|  | /* Update the number of IRQs the device has available to it */ | 
|  | control &= ~PCI_MSI_FLAGS_QSIZE; | 
|  | control |= request_private_bits << 4; | 
|  | pci_write_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, control); | 
|  |  | 
|  | irq_set_msi_desc(irq, desc); | 
|  | pci_write_msi_msg(irq, &msg); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) | 
|  | { | 
|  | struct msi_desc *entry; | 
|  | int ret; | 
|  |  | 
|  | /* | 
|  | * MSI-X is not supported. | 
|  | */ | 
|  | if (type == PCI_CAP_ID_MSIX) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * If an architecture wants to support multiple MSI, it needs to | 
|  | * override arch_setup_msi_irqs() | 
|  | */ | 
|  | if (type == PCI_CAP_ID_MSI && nvec > 1) | 
|  | return 1; | 
|  |  | 
|  | for_each_pci_msi_entry(entry, dev) { | 
|  | ret = arch_setup_msi_irq(dev, entry); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | if (ret > 0) | 
|  | return -ENOSPC; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Called when a device no longer needs its MSI interrupts. All | 
|  | * MSI interrupts for the device are freed. | 
|  | * | 
|  | * @irq:    The devices first irq number. There may be multple in sequence. | 
|  | */ | 
|  | void arch_teardown_msi_irq(unsigned int irq) | 
|  | { | 
|  | int number_irqs; | 
|  | u64 bitmask; | 
|  | int index = 0; | 
|  | int irq0; | 
|  |  | 
|  | if ((irq < OCTEON_IRQ_MSI_BIT0) | 
|  | || (irq > msi_irq_size + OCTEON_IRQ_MSI_BIT0)) | 
|  | panic("arch_teardown_msi_irq: Attempted to teardown illegal " | 
|  | "MSI interrupt (%d)", irq); | 
|  |  | 
|  | irq -= OCTEON_IRQ_MSI_BIT0; | 
|  | index = irq / 64; | 
|  | irq0 = irq % 64; | 
|  |  | 
|  | /* | 
|  | * Count the number of IRQs we need to free by looking at the | 
|  | * msi_multiple_irq_bitmask. Each bit set means that the next | 
|  | * IRQ is also owned by this device. | 
|  | */ | 
|  | number_irqs = 0; | 
|  | while ((irq0 + number_irqs < 64) && | 
|  | (msi_multiple_irq_bitmask[index] | 
|  | & (1ull << (irq0 + number_irqs)))) | 
|  | number_irqs++; | 
|  | number_irqs++; | 
|  | /* Mask with one bit for each IRQ */ | 
|  | bitmask = (1 << number_irqs) - 1; | 
|  | /* Shift the mask to the correct bit location */ | 
|  | bitmask <<= irq0; | 
|  | if ((msi_free_irq_bitmask[index] & bitmask) != bitmask) | 
|  | panic("arch_teardown_msi_irq: Attempted to teardown MSI " | 
|  | "interrupt (%d) not in use", irq); | 
|  |  | 
|  | /* Checks are done, update the in use bitmask */ | 
|  | spin_lock(&msi_free_irq_bitmask_lock); | 
|  | msi_free_irq_bitmask[index] &= ~bitmask; | 
|  | msi_multiple_irq_bitmask[index] &= ~bitmask; | 
|  | spin_unlock(&msi_free_irq_bitmask_lock); | 
|  | } | 
|  |  | 
|  | static DEFINE_RAW_SPINLOCK(octeon_irq_msi_lock); | 
|  |  | 
|  | static u64 msi_rcv_reg[4]; | 
|  | static u64 mis_ena_reg[4]; | 
|  |  | 
|  | static void octeon_irq_msi_enable_pcie(struct irq_data *data) | 
|  | { | 
|  | u64 en; | 
|  | unsigned long flags; | 
|  | int msi_number = data->irq - OCTEON_IRQ_MSI_BIT0; | 
|  | int irq_index = msi_number >> 6; | 
|  | int irq_bit = msi_number & 0x3f; | 
|  |  | 
|  | raw_spin_lock_irqsave(&octeon_irq_msi_lock, flags); | 
|  | en = cvmx_read_csr(mis_ena_reg[irq_index]); | 
|  | en |= 1ull << irq_bit; | 
|  | cvmx_write_csr(mis_ena_reg[irq_index], en); | 
|  | cvmx_read_csr(mis_ena_reg[irq_index]); | 
|  | raw_spin_unlock_irqrestore(&octeon_irq_msi_lock, flags); | 
|  | } | 
|  |  | 
|  | static void octeon_irq_msi_disable_pcie(struct irq_data *data) | 
|  | { | 
|  | u64 en; | 
|  | unsigned long flags; | 
|  | int msi_number = data->irq - OCTEON_IRQ_MSI_BIT0; | 
|  | int irq_index = msi_number >> 6; | 
|  | int irq_bit = msi_number & 0x3f; | 
|  |  | 
|  | raw_spin_lock_irqsave(&octeon_irq_msi_lock, flags); | 
|  | en = cvmx_read_csr(mis_ena_reg[irq_index]); | 
|  | en &= ~(1ull << irq_bit); | 
|  | cvmx_write_csr(mis_ena_reg[irq_index], en); | 
|  | cvmx_read_csr(mis_ena_reg[irq_index]); | 
|  | raw_spin_unlock_irqrestore(&octeon_irq_msi_lock, flags); | 
|  | } | 
|  |  | 
|  | static struct irq_chip octeon_irq_chip_msi_pcie = { | 
|  | .name = "MSI", | 
|  | .irq_enable = octeon_irq_msi_enable_pcie, | 
|  | .irq_disable = octeon_irq_msi_disable_pcie, | 
|  | }; | 
|  |  | 
|  | static void octeon_irq_msi_enable_pci(struct irq_data *data) | 
|  | { | 
|  | /* | 
|  | * Octeon PCI doesn't have the ability to mask/unmask MSI | 
|  | * interrupts individually. Instead of masking/unmasking them | 
|  | * in groups of 16, we simple assume MSI devices are well | 
|  | * behaved. MSI interrupts are always enable and the ACK is | 
|  | * assumed to be enough | 
|  | */ | 
|  | } | 
|  |  | 
|  | static void octeon_irq_msi_disable_pci(struct irq_data *data) | 
|  | { | 
|  | /* See comment in enable */ | 
|  | } | 
|  |  | 
|  | static struct irq_chip octeon_irq_chip_msi_pci = { | 
|  | .name = "MSI", | 
|  | .irq_enable = octeon_irq_msi_enable_pci, | 
|  | .irq_disable = octeon_irq_msi_disable_pci, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Called by the interrupt handling code when an MSI interrupt | 
|  | * occurs. | 
|  | */ | 
|  | static irqreturn_t __octeon_msi_do_interrupt(int index, u64 msi_bits) | 
|  | { | 
|  | int irq; | 
|  | int bit; | 
|  |  | 
|  | bit = fls64(msi_bits); | 
|  | if (bit) { | 
|  | bit--; | 
|  | /* Acknowledge it first. */ | 
|  | cvmx_write_csr(msi_rcv_reg[index], 1ull << bit); | 
|  |  | 
|  | irq = bit + OCTEON_IRQ_MSI_BIT0 + 64 * index; | 
|  | do_IRQ(irq); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  | return IRQ_NONE; | 
|  | } | 
|  |  | 
|  | #define OCTEON_MSI_INT_HANDLER_X(x)					\ | 
|  | static irqreturn_t octeon_msi_interrupt##x(int cpl, void *dev_id)	\ | 
|  | {									\ | 
|  | u64 msi_bits = cvmx_read_csr(msi_rcv_reg[(x)]);			\ | 
|  | return __octeon_msi_do_interrupt((x), msi_bits);		\ | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Create octeon_msi_interrupt{0-3} function body | 
|  | */ | 
|  | OCTEON_MSI_INT_HANDLER_X(0); | 
|  | OCTEON_MSI_INT_HANDLER_X(1); | 
|  | OCTEON_MSI_INT_HANDLER_X(2); | 
|  | OCTEON_MSI_INT_HANDLER_X(3); | 
|  |  | 
|  | /* | 
|  | * Initializes the MSI interrupt handling code | 
|  | */ | 
|  | int __init octeon_msi_initialize(void) | 
|  | { | 
|  | int irq; | 
|  | struct irq_chip *msi; | 
|  |  | 
|  | if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_PCIE) { | 
|  | msi_rcv_reg[0] = CVMX_PEXP_NPEI_MSI_RCV0; | 
|  | msi_rcv_reg[1] = CVMX_PEXP_NPEI_MSI_RCV1; | 
|  | msi_rcv_reg[2] = CVMX_PEXP_NPEI_MSI_RCV2; | 
|  | msi_rcv_reg[3] = CVMX_PEXP_NPEI_MSI_RCV3; | 
|  | mis_ena_reg[0] = CVMX_PEXP_NPEI_MSI_ENB0; | 
|  | mis_ena_reg[1] = CVMX_PEXP_NPEI_MSI_ENB1; | 
|  | mis_ena_reg[2] = CVMX_PEXP_NPEI_MSI_ENB2; | 
|  | mis_ena_reg[3] = CVMX_PEXP_NPEI_MSI_ENB3; | 
|  | msi = &octeon_irq_chip_msi_pcie; | 
|  | } else { | 
|  | msi_rcv_reg[0] = CVMX_NPI_NPI_MSI_RCV; | 
|  | #define INVALID_GENERATE_ADE 0x8700000000000000ULL; | 
|  | msi_rcv_reg[1] = INVALID_GENERATE_ADE; | 
|  | msi_rcv_reg[2] = INVALID_GENERATE_ADE; | 
|  | msi_rcv_reg[3] = INVALID_GENERATE_ADE; | 
|  | mis_ena_reg[0] = INVALID_GENERATE_ADE; | 
|  | mis_ena_reg[1] = INVALID_GENERATE_ADE; | 
|  | mis_ena_reg[2] = INVALID_GENERATE_ADE; | 
|  | mis_ena_reg[3] = INVALID_GENERATE_ADE; | 
|  | msi = &octeon_irq_chip_msi_pci; | 
|  | } | 
|  |  | 
|  | for (irq = OCTEON_IRQ_MSI_BIT0; irq <= OCTEON_IRQ_MSI_LAST; irq++) | 
|  | irq_set_chip_and_handler(irq, msi, handle_simple_irq); | 
|  |  | 
|  | if (octeon_has_feature(OCTEON_FEATURE_PCIE)) { | 
|  | if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt0, | 
|  | 0, "MSI[0:63]", octeon_msi_interrupt0)) | 
|  | panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed"); | 
|  |  | 
|  | if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt1, | 
|  | 0, "MSI[64:127]", octeon_msi_interrupt1)) | 
|  | panic("request_irq(OCTEON_IRQ_PCI_MSI1) failed"); | 
|  |  | 
|  | if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt2, | 
|  | 0, "MSI[127:191]", octeon_msi_interrupt2)) | 
|  | panic("request_irq(OCTEON_IRQ_PCI_MSI2) failed"); | 
|  |  | 
|  | if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt3, | 
|  | 0, "MSI[192:255]", octeon_msi_interrupt3)) | 
|  | panic("request_irq(OCTEON_IRQ_PCI_MSI3) failed"); | 
|  |  | 
|  | msi_irq_size = 256; | 
|  | } else if (octeon_is_pci_host()) { | 
|  | if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt0, | 
|  | 0, "MSI[0:15]", octeon_msi_interrupt0)) | 
|  | panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed"); | 
|  |  | 
|  | if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt0, | 
|  | 0, "MSI[16:31]", octeon_msi_interrupt0)) | 
|  | panic("request_irq(OCTEON_IRQ_PCI_MSI1) failed"); | 
|  |  | 
|  | if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt0, | 
|  | 0, "MSI[32:47]", octeon_msi_interrupt0)) | 
|  | panic("request_irq(OCTEON_IRQ_PCI_MSI2) failed"); | 
|  |  | 
|  | if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt0, | 
|  | 0, "MSI[48:63]", octeon_msi_interrupt0)) | 
|  | panic("request_irq(OCTEON_IRQ_PCI_MSI3) failed"); | 
|  | msi_irq_size = 64; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | subsys_initcall(octeon_msi_initialize); |