|  | /* | 
|  | * This file is part of wl1271 | 
|  | * | 
|  | * Copyright (C) 2009 Nokia Corporation | 
|  | * | 
|  | * Contact: Luciano Coelho <luciano.coelho@nokia.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * version 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
|  | * 02110-1301 USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/crc7.h> | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/etherdevice.h> | 
|  |  | 
|  | #include "wl1271.h" | 
|  | #include "wl1271_reg.h" | 
|  | #include "wl1271_spi.h" | 
|  | #include "wl1271_acx.h" | 
|  | #include "wl12xx_80211.h" | 
|  | #include "wl1271_cmd.h" | 
|  |  | 
|  | /* | 
|  | * send command to firmware | 
|  | * | 
|  | * @wl: wl struct | 
|  | * @id: command id | 
|  | * @buf: buffer containing the command, must work with dma | 
|  | * @len: length of the buffer | 
|  | */ | 
|  | int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len) | 
|  | { | 
|  | struct wl1271_cmd_header *cmd; | 
|  | unsigned long timeout; | 
|  | u32 intr; | 
|  | int ret = 0; | 
|  |  | 
|  | cmd = buf; | 
|  | cmd->id = id; | 
|  | cmd->status = 0; | 
|  |  | 
|  | WARN_ON(len % 4 != 0); | 
|  |  | 
|  | wl1271_spi_mem_write(wl, wl->cmd_box_addr, buf, len); | 
|  |  | 
|  | wl1271_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD); | 
|  |  | 
|  | timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT); | 
|  |  | 
|  | intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); | 
|  | while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) { | 
|  | if (time_after(jiffies, timeout)) { | 
|  | wl1271_error("command complete timeout"); | 
|  | ret = -ETIMEDOUT; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | msleep(1); | 
|  |  | 
|  | intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); | 
|  | } | 
|  |  | 
|  | wl1271_reg_write32(wl, ACX_REG_INTERRUPT_ACK, | 
|  | WL1271_ACX_INTR_CMD_COMPLETE); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_cal_channel_tune(struct wl1271 *wl) | 
|  | { | 
|  | struct wl1271_cmd_cal_channel_tune *cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) | 
|  | return -ENOMEM; | 
|  |  | 
|  | cmd->test.id = TEST_CMD_CHANNEL_TUNE; | 
|  |  | 
|  | cmd->band = WL1271_CHANNEL_TUNE_BAND_2_4; | 
|  | /* set up any channel, 7 is in the middle of the range */ | 
|  | cmd->channel = 7; | 
|  |  | 
|  | ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0); | 
|  | if (ret < 0) | 
|  | wl1271_warning("TEST_CMD_CHANNEL_TUNE failed"); | 
|  |  | 
|  | kfree(cmd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_cal_update_ref_point(struct wl1271 *wl) | 
|  | { | 
|  | struct wl1271_cmd_cal_update_ref_point *cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) | 
|  | return -ENOMEM; | 
|  |  | 
|  | cmd->test.id = TEST_CMD_UPDATE_PD_REFERENCE_POINT; | 
|  |  | 
|  | /* FIXME: still waiting for the correct values */ | 
|  | cmd->ref_power    = 0; | 
|  | cmd->ref_detector = 0; | 
|  |  | 
|  | cmd->sub_band     = WL1271_PD_REFERENCE_POINT_BAND_B_G; | 
|  |  | 
|  | ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0); | 
|  | if (ret < 0) | 
|  | wl1271_warning("TEST_CMD_UPDATE_PD_REFERENCE_POINT failed"); | 
|  |  | 
|  | kfree(cmd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_cal_p2g(struct wl1271 *wl) | 
|  | { | 
|  | struct wl1271_cmd_cal_p2g *cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) | 
|  | return -ENOMEM; | 
|  |  | 
|  | cmd->test.id = TEST_CMD_P2G_CAL; | 
|  |  | 
|  | cmd->sub_band_mask = WL1271_CAL_P2G_BAND_B_G; | 
|  |  | 
|  | ret = wl1271_cmd_test(wl, cmd, sizeof(*cmd), 0); | 
|  | if (ret < 0) | 
|  | wl1271_warning("TEST_CMD_P2G_CAL failed"); | 
|  |  | 
|  | kfree(cmd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_cal(struct wl1271 *wl) | 
|  | { | 
|  | /* | 
|  | * FIXME: we must make sure that we're not sleeping when calibration | 
|  | * is done | 
|  | */ | 
|  | int ret; | 
|  |  | 
|  | wl1271_notice("performing tx calibration"); | 
|  |  | 
|  | ret = wl1271_cmd_cal_channel_tune(wl); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = wl1271_cmd_cal_update_ref_point(wl); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = wl1271_cmd_cal_p2g(wl); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type, u8 dtim_interval, | 
|  | u16 beacon_interval, u8 wait) | 
|  | { | 
|  | static bool do_cal = true; | 
|  | unsigned long timeout; | 
|  | struct wl1271_cmd_join *join; | 
|  | int ret, i; | 
|  | u8 *bssid; | 
|  |  | 
|  | /* FIXME: remove when we get calibration from the factory */ | 
|  | if (do_cal) { | 
|  | ret = wl1271_cmd_cal(wl); | 
|  | if (ret < 0) | 
|  | wl1271_warning("couldn't calibrate"); | 
|  | else | 
|  | do_cal = false; | 
|  | } | 
|  |  | 
|  |  | 
|  | join = kzalloc(sizeof(*join), GFP_KERNEL); | 
|  | if (!join) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd join"); | 
|  |  | 
|  | /* Reverse order BSSID */ | 
|  | bssid = (u8 *) &join->bssid_lsb; | 
|  | for (i = 0; i < ETH_ALEN; i++) | 
|  | bssid[i] = wl->bssid[ETH_ALEN - i - 1]; | 
|  |  | 
|  | join->rx_config_options = wl->rx_config; | 
|  | join->rx_filter_options = wl->rx_filter; | 
|  |  | 
|  | join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS | | 
|  | RATE_MASK_5_5MBPS | RATE_MASK_11MBPS; | 
|  |  | 
|  | join->beacon_interval = beacon_interval; | 
|  | join->dtim_interval = dtim_interval; | 
|  | join->bss_type = bss_type; | 
|  | join->channel = wl->channel; | 
|  | join->ssid_len = wl->ssid_len; | 
|  | memcpy(join->ssid, wl->ssid, wl->ssid_len); | 
|  | join->ctrl = WL1271_JOIN_CMD_CTRL_TX_FLUSH; | 
|  |  | 
|  | /* increment the session counter */ | 
|  | wl->session_counter++; | 
|  | if (wl->session_counter >= SESSION_COUNTER_MAX) | 
|  | wl->session_counter = 0; | 
|  |  | 
|  | join->ctrl |= wl->session_counter << WL1271_JOIN_CMD_TX_SESSION_OFFSET; | 
|  |  | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join)); | 
|  | if (ret < 0) { | 
|  | wl1271_error("failed to initiate cmd join"); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | timeout = msecs_to_jiffies(JOIN_TIMEOUT); | 
|  |  | 
|  | /* | 
|  | * ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to | 
|  | * simplify locking we just sleep instead, for now | 
|  | */ | 
|  | if (wait) | 
|  | msleep(10); | 
|  |  | 
|  | out_free: | 
|  | kfree(join); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * send test command to firmware | 
|  | * | 
|  | * @wl: wl struct | 
|  | * @buf: buffer containing the command, with all headers, must work with dma | 
|  | * @len: length of the buffer | 
|  | * @answer: is answer needed | 
|  | */ | 
|  | int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd test"); | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_TEST, buf, buf_len); | 
|  |  | 
|  | if (ret < 0) { | 
|  | wl1271_warning("TEST command failed"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (answer) { | 
|  | struct wl1271_command *cmd_answer; | 
|  |  | 
|  | /* | 
|  | * The test command got in, we can read the answer. | 
|  | * The answer would be a wl1271_command, where the | 
|  | * parameter array contains the actual answer. | 
|  | */ | 
|  | wl1271_spi_mem_read(wl, wl->cmd_box_addr, buf, buf_len); | 
|  |  | 
|  | cmd_answer = buf; | 
|  |  | 
|  | if (cmd_answer->header.status != CMD_STATUS_SUCCESS) | 
|  | wl1271_error("TEST command answer error: %d", | 
|  | cmd_answer->header.status); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * read acx from firmware | 
|  | * | 
|  | * @wl: wl struct | 
|  | * @id: acx id | 
|  | * @buf: buffer for the response, including all headers, must work with dma | 
|  | * @len: lenght of buf | 
|  | */ | 
|  | int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len) | 
|  | { | 
|  | struct acx_header *acx = buf; | 
|  | int ret; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd interrogate"); | 
|  |  | 
|  | acx->id = id; | 
|  |  | 
|  | /* payload length, does not include any headers */ | 
|  | acx->len = len - sizeof(*acx); | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx)); | 
|  | if (ret < 0) { | 
|  | wl1271_error("INTERROGATE command failed"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* the interrogate command got in, we can read the answer */ | 
|  | wl1271_spi_mem_read(wl, wl->cmd_box_addr, buf, len); | 
|  |  | 
|  | acx = buf; | 
|  | if (acx->cmd.status != CMD_STATUS_SUCCESS) | 
|  | wl1271_error("INTERROGATE command error: %d", | 
|  | acx->cmd.status); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * write acx value to firmware | 
|  | * | 
|  | * @wl: wl struct | 
|  | * @id: acx id | 
|  | * @buf: buffer containing acx, including all headers, must work with dma | 
|  | * @len: length of buf | 
|  | */ | 
|  | int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len) | 
|  | { | 
|  | struct acx_header *acx = buf; | 
|  | int ret; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd configure"); | 
|  |  | 
|  | acx->id = id; | 
|  |  | 
|  | /* payload length, does not include any headers */ | 
|  | acx->len = len - sizeof(*acx); | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_CONFIGURE, acx, len); | 
|  | if (ret < 0) { | 
|  | wl1271_warning("CONFIGURE command NOK"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_data_path(struct wl1271 *wl, u8 channel, bool enable) | 
|  | { | 
|  | struct cmd_enabledisable_path *cmd; | 
|  | int ret; | 
|  | u16 cmd_rx, cmd_tx; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd data path"); | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cmd->channel = channel; | 
|  |  | 
|  | if (enable) { | 
|  | cmd_rx = CMD_ENABLE_RX; | 
|  | cmd_tx = CMD_ENABLE_TX; | 
|  | } else { | 
|  | cmd_rx = CMD_DISABLE_RX; | 
|  | cmd_tx = CMD_DISABLE_TX; | 
|  | } | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd)); | 
|  | if (ret < 0) { | 
|  | wl1271_error("rx %s cmd for channel %d failed", | 
|  | enable ? "start" : "stop", channel); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | wl1271_debug(DEBUG_BOOT, "rx %s cmd channel %d", | 
|  | enable ? "start" : "stop", channel); | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd)); | 
|  | if (ret < 0) { | 
|  | wl1271_error("tx %s cmd for channel %d failed", | 
|  | enable ? "start" : "stop", channel); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | wl1271_debug(DEBUG_BOOT, "tx %s cmd channel %d", | 
|  | enable ? "start" : "stop", channel); | 
|  |  | 
|  | out: | 
|  | kfree(cmd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode) | 
|  | { | 
|  | struct wl1271_cmd_ps_params *ps_params = NULL; | 
|  | int ret = 0; | 
|  |  | 
|  | /* FIXME: this should be in ps.c */ | 
|  | ret = wl1271_acx_wake_up_conditions(wl, WAKE_UP_EVENT_DTIM_BITMAP, | 
|  | wl->listen_int); | 
|  | if (ret < 0) { | 
|  | wl1271_error("couldn't set wake up conditions"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd set ps mode"); | 
|  |  | 
|  | ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL); | 
|  | if (!ps_params) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ps_params->ps_mode = ps_mode; | 
|  | ps_params->send_null_data = 1; | 
|  | ps_params->retries = 5; | 
|  | ps_params->hang_over_period = 128; | 
|  | ps_params->null_data_rate = 1; /* 1 Mbps */ | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params, | 
|  | sizeof(*ps_params)); | 
|  | if (ret < 0) { | 
|  | wl1271_error("cmd set_ps_mode failed"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(ps_params); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer, | 
|  | size_t len) | 
|  | { | 
|  | struct cmd_read_write_memory *cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd read memory"); | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | WARN_ON(len > MAX_READ_SIZE); | 
|  | len = min_t(size_t, len, MAX_READ_SIZE); | 
|  |  | 
|  | cmd->addr = addr; | 
|  | cmd->size = len; | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd)); | 
|  | if (ret < 0) { | 
|  | wl1271_error("read memory command failed: %d", ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* the read command got in, we can now read the answer */ | 
|  | wl1271_spi_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd)); | 
|  |  | 
|  | if (cmd->header.status != CMD_STATUS_SUCCESS) | 
|  | wl1271_error("error in read command result: %d", | 
|  | cmd->header.status); | 
|  |  | 
|  | memcpy(answer, cmd->value, len); | 
|  |  | 
|  | out: | 
|  | kfree(cmd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len, | 
|  | u8 active_scan, u8 high_prio, u8 num_channels, | 
|  | u8 probe_requests) | 
|  | { | 
|  |  | 
|  | struct wl1271_cmd_trigger_scan_to *trigger = NULL; | 
|  | struct wl1271_cmd_scan *params = NULL; | 
|  | int i, ret; | 
|  | u16 scan_options = 0; | 
|  |  | 
|  | if (wl->scanning) | 
|  | return -EINVAL; | 
|  |  | 
|  | params = kzalloc(sizeof(*params), GFP_KERNEL); | 
|  | if (!params) | 
|  | return -ENOMEM; | 
|  |  | 
|  | params->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD); | 
|  | params->params.rx_filter_options = | 
|  | cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN); | 
|  |  | 
|  | if (!active_scan) | 
|  | scan_options |= WL1271_SCAN_OPT_PASSIVE; | 
|  | if (high_prio) | 
|  | scan_options |= WL1271_SCAN_OPT_PRIORITY_HIGH; | 
|  | params->params.scan_options = scan_options; | 
|  |  | 
|  | params->params.num_channels = num_channels; | 
|  | params->params.num_probe_requests = probe_requests; | 
|  | params->params.tx_rate = cpu_to_le32(RATE_MASK_2MBPS); | 
|  | params->params.tid_trigger = 0; | 
|  | params->params.scan_tag = WL1271_SCAN_DEFAULT_TAG; | 
|  |  | 
|  | for (i = 0; i < num_channels; i++) { | 
|  | params->channels[i].min_duration = | 
|  | cpu_to_le32(WL1271_SCAN_CHAN_MIN_DURATION); | 
|  | params->channels[i].max_duration = | 
|  | cpu_to_le32(WL1271_SCAN_CHAN_MAX_DURATION); | 
|  | memset(¶ms->channels[i].bssid_lsb, 0xff, 4); | 
|  | memset(¶ms->channels[i].bssid_msb, 0xff, 2); | 
|  | params->channels[i].early_termination = 0; | 
|  | params->channels[i].tx_power_att = WL1271_SCAN_CURRENT_TX_PWR; | 
|  | params->channels[i].channel = i + 1; | 
|  | } | 
|  |  | 
|  | if (len && ssid) { | 
|  | params->params.ssid_len = len; | 
|  | memcpy(params->params.ssid, ssid, len); | 
|  | } | 
|  |  | 
|  | ret = wl1271_cmd_build_probe_req(wl, ssid, len); | 
|  | if (ret < 0) { | 
|  | wl1271_error("PROBE request template failed"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | trigger = kzalloc(sizeof(*trigger), GFP_KERNEL); | 
|  | if (!trigger) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* disable the timeout */ | 
|  | trigger->timeout = 0; | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger, | 
|  | sizeof(*trigger)); | 
|  | if (ret < 0) { | 
|  | wl1271_error("trigger scan to failed for hw scan"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | wl1271_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params)); | 
|  |  | 
|  | wl->scanning = true; | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_SCAN, params, sizeof(*params)); | 
|  | if (ret < 0) { | 
|  | wl1271_error("SCAN failed"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | wl1271_spi_mem_read(wl, wl->cmd_box_addr, params, sizeof(*params)); | 
|  |  | 
|  | if (params->header.status != CMD_STATUS_SUCCESS) { | 
|  | wl1271_error("Scan command error: %d", | 
|  | params->header.status); | 
|  | wl->scanning = false; | 
|  | ret = -EIO; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(params); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id, | 
|  | void *buf, size_t buf_len) | 
|  | { | 
|  | struct wl1271_cmd_template_set *cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd template_set %d", template_id); | 
|  |  | 
|  | WARN_ON(buf_len > WL1271_CMD_TEMPL_MAX_SIZE); | 
|  | buf_len = min_t(size_t, buf_len, WL1271_CMD_TEMPL_MAX_SIZE); | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cmd->len = cpu_to_le16(buf_len); | 
|  | cmd->template_type = template_id; | 
|  | cmd->enabled_rates = ACX_RATE_MASK_UNSPECIFIED; | 
|  | cmd->short_retry_limit = ACX_RATE_RETRY_LIMIT; | 
|  | cmd->long_retry_limit = ACX_RATE_RETRY_LIMIT; | 
|  |  | 
|  | if (buf) | 
|  | memcpy(cmd->template_data, buf, buf_len); | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_SET_TEMPLATE, cmd, sizeof(*cmd)); | 
|  | if (ret < 0) { | 
|  | wl1271_warning("cmd set_template failed: %d", ret); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | out_free: | 
|  | kfree(cmd); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int wl1271_build_basic_rates(char *rates) | 
|  | { | 
|  | u8 index = 0; | 
|  |  | 
|  | rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB; | 
|  | rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB; | 
|  | rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB; | 
|  | rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB; | 
|  |  | 
|  | return index; | 
|  | } | 
|  |  | 
|  | static int wl1271_build_extended_rates(char *rates) | 
|  | { | 
|  | u8 index = 0; | 
|  |  | 
|  | rates[index++] = IEEE80211_OFDM_RATE_6MB; | 
|  | rates[index++] = IEEE80211_OFDM_RATE_9MB; | 
|  | rates[index++] = IEEE80211_OFDM_RATE_12MB; | 
|  | rates[index++] = IEEE80211_OFDM_RATE_18MB; | 
|  | rates[index++] = IEEE80211_OFDM_RATE_24MB; | 
|  | rates[index++] = IEEE80211_OFDM_RATE_36MB; | 
|  | rates[index++] = IEEE80211_OFDM_RATE_48MB; | 
|  | rates[index++] = IEEE80211_OFDM_RATE_54MB; | 
|  |  | 
|  | return index; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_build_null_data(struct wl1271 *wl) | 
|  | { | 
|  | struct wl12xx_null_data_template template; | 
|  |  | 
|  | if (!is_zero_ether_addr(wl->bssid)) { | 
|  | memcpy(template.header.da, wl->bssid, ETH_ALEN); | 
|  | memcpy(template.header.bssid, wl->bssid, ETH_ALEN); | 
|  | } else { | 
|  | memset(template.header.da, 0xff, ETH_ALEN); | 
|  | memset(template.header.bssid, 0xff, ETH_ALEN); | 
|  | } | 
|  |  | 
|  | memcpy(template.header.sa, wl->mac_addr, ETH_ALEN); | 
|  | template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA | | 
|  | IEEE80211_STYPE_NULLFUNC); | 
|  |  | 
|  | return wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, &template, | 
|  | sizeof(template)); | 
|  |  | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid) | 
|  | { | 
|  | struct wl12xx_ps_poll_template template; | 
|  |  | 
|  | memcpy(template.bssid, wl->bssid, ETH_ALEN); | 
|  | memcpy(template.ta, wl->mac_addr, ETH_ALEN); | 
|  | template.aid = aid; | 
|  | template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL); | 
|  |  | 
|  | return wl1271_cmd_template_set(wl, CMD_TEMPL_PS_POLL, &template, | 
|  | sizeof(template)); | 
|  |  | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len) | 
|  | { | 
|  | struct wl12xx_probe_req_template template; | 
|  | struct wl12xx_ie_rates *rates; | 
|  | char *ptr; | 
|  | u16 size; | 
|  |  | 
|  | ptr = (char *)&template; | 
|  | size = sizeof(struct ieee80211_header); | 
|  |  | 
|  | memset(template.header.da, 0xff, ETH_ALEN); | 
|  | memset(template.header.bssid, 0xff, ETH_ALEN); | 
|  | memcpy(template.header.sa, wl->mac_addr, ETH_ALEN); | 
|  | template.header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); | 
|  |  | 
|  | /* IEs */ | 
|  | /* SSID */ | 
|  | template.ssid.header.id = WLAN_EID_SSID; | 
|  | template.ssid.header.len = ssid_len; | 
|  | if (ssid_len && ssid) | 
|  | memcpy(template.ssid.ssid, ssid, ssid_len); | 
|  | size += sizeof(struct wl12xx_ie_header) + ssid_len; | 
|  | ptr += size; | 
|  |  | 
|  | /* Basic Rates */ | 
|  | rates = (struct wl12xx_ie_rates *)ptr; | 
|  | rates->header.id = WLAN_EID_SUPP_RATES; | 
|  | rates->header.len = wl1271_build_basic_rates(rates->rates); | 
|  | size += sizeof(struct wl12xx_ie_header) + rates->header.len; | 
|  | ptr += sizeof(struct wl12xx_ie_header) + rates->header.len; | 
|  |  | 
|  | /* Extended rates */ | 
|  | rates = (struct wl12xx_ie_rates *)ptr; | 
|  | rates->header.id = WLAN_EID_EXT_SUPP_RATES; | 
|  | rates->header.len = wl1271_build_extended_rates(rates->rates); | 
|  | size += sizeof(struct wl12xx_ie_header) + rates->header.len; | 
|  |  | 
|  | wl1271_dump(DEBUG_SCAN, "PROBE REQ: ", &template, size); | 
|  |  | 
|  | return wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4, | 
|  | &template, size); | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id) | 
|  | { | 
|  | struct wl1271_cmd_set_keys *cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | wl1271_debug(DEBUG_CMD, "cmd set_default_wep_key %d", id); | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cmd->id = id; | 
|  | cmd->key_action = KEY_SET_ID; | 
|  | cmd->key_type = KEY_WEP; | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd)); | 
|  | if (ret < 0) { | 
|  | wl1271_warning("cmd set_default_wep_key failed: %d", ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(cmd); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type, | 
|  | u8 key_size, const u8 *key, const u8 *addr) | 
|  | { | 
|  | struct wl1271_cmd_set_keys *cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (key_type != KEY_WEP) | 
|  | memcpy(cmd->addr, addr, ETH_ALEN); | 
|  |  | 
|  | cmd->key_action = action; | 
|  | cmd->key_size = key_size; | 
|  | cmd->key_type = key_type; | 
|  |  | 
|  | /* we have only one SSID profile */ | 
|  | cmd->ssid_profile = 0; | 
|  |  | 
|  | cmd->id = id; | 
|  |  | 
|  | /* FIXME: this is from wl1251, needs to be checked */ | 
|  | if (key_type == KEY_TKIP) { | 
|  | /* | 
|  | * We get the key in the following form: | 
|  | * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes) | 
|  | * but the target is expecting: | 
|  | * TKIP - RX MIC - TX MIC | 
|  | */ | 
|  | memcpy(cmd->key, key, 16); | 
|  | memcpy(cmd->key + 16, key + 24, 8); | 
|  | memcpy(cmd->key + 24, key + 16, 8); | 
|  |  | 
|  | } else { | 
|  | memcpy(cmd->key, key, key_size); | 
|  | } | 
|  |  | 
|  | wl1271_dump(DEBUG_CRYPT, "TARGET KEY: ", cmd, sizeof(*cmd)); | 
|  |  | 
|  | ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd)); | 
|  | if (ret < 0) { | 
|  | wl1271_warning("could not set keys"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(cmd); | 
|  |  | 
|  | return ret; | 
|  | } |