drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c - linux - Git at Google

 /*******************************************************************************
   STMMAC Ethernet Driver -- MDIO bus implementation
   Provides Bus interface for MII registers

   Copyright (C) 2007-2009  STMicroelectronics Ltd

   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
   version 2, as published by the Free Software Foundation.

   This program is distributed in the hope it will be useful, but WITHOUT
   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
   more details.

   The full GNU General Public License is included in this distribution in
   the file called "COPYING".

   Author: Carl Shaw <carl.shaw@st.com>
   Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/

 #include <linux/io.h>
 #include <linux/iopoll.h>
 #include <linux/mii.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
 #include <linux/of_mdio.h>
 #include <linux/phy.h>
 #include <linux/slab.h>

 #include "dwxgmac2.h"
 #include "stmmac.h"

 #define MII_BUSY 0x00000001
 #define MII_WRITE 0x00000002

 /* GMAC4 defines */
 #define MII_GMAC4_GOC_SHIFT		2
 #define MII_GMAC4_WRITE			(1 << MII_GMAC4_GOC_SHIFT)
 #define MII_GMAC4_READ			(3 << MII_GMAC4_GOC_SHIFT)

 /* XGMAC defines */
 #define MII_XGMAC_SADDR			BIT(18)
 #define MII_XGMAC_CMD_SHIFT		16
 #define MII_XGMAC_WRITE			(1 << MII_XGMAC_CMD_SHIFT)
 #define MII_XGMAC_READ			(3 << MII_XGMAC_CMD_SHIFT)
 #define MII_XGMAC_BUSY			BIT(22)
 #define MII_XGMAC_MAX_C22ADDR		3
 #define MII_XGMAC_C22P_MASK		GENMASK(MII_XGMAC_MAX_C22ADDR, 0)

 static int stmmac_xgmac2_c22_format(struct stmmac_priv *priv, int phyaddr,
 				    int phyreg, u32 *hw_addr)
 {
 	unsigned int mii_data = priv->hw->mii.data;
 	u32 tmp;

 	/* HW does not support C22 addr >= 4 */
 	if (phyaddr > MII_XGMAC_MAX_C22ADDR)
 		return -ENODEV;
 	/* Wait until any existing MII operation is complete */
 	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
 			       !(tmp & MII_XGMAC_BUSY), 100, 10000))
 		return -EBUSY;

 	/* Set port as Clause 22 */
 	tmp = readl(priv->ioaddr + XGMAC_MDIO_C22P);
 	tmp &= ~MII_XGMAC_C22P_MASK;
 	tmp |= BIT(phyaddr);
 	writel(tmp, priv->ioaddr + XGMAC_MDIO_C22P);

 	*hw_addr = (phyaddr << 16) | (phyreg & 0x1f);
 	return 0;
 }

 static int stmmac_xgmac2_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
 {
 	struct net_device *ndev = bus->priv;
 	struct stmmac_priv *priv = netdev_priv(ndev);
 	unsigned int mii_address = priv->hw->mii.addr;
 	unsigned int mii_data = priv->hw->mii.data;
 	u32 tmp, addr, value = MII_XGMAC_BUSY;
 	int ret;

 	if (phyreg & MII_ADDR_C45) {
 		return -EOPNOTSUPP;
 	} else {
 		ret = stmmac_xgmac2_c22_format(priv, phyaddr, phyreg, &addr);
 		if (ret)
 			return ret;
 	}

 	value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
 		& priv->hw->mii.clk_csr_mask;
 	value |= MII_XGMAC_SADDR | MII_XGMAC_READ;

 	/* Wait until any existing MII operation is complete */
 	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
 			       !(tmp & MII_XGMAC_BUSY), 100, 10000))
 		return -EBUSY;

 	/* Set the MII address register to read */
 	writel(addr, priv->ioaddr + mii_address);
 	writel(value, priv->ioaddr + mii_data);

 	/* Wait until any existing MII operation is complete */
 	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
 			       !(tmp & MII_XGMAC_BUSY), 100, 10000))
 		return -EBUSY;

 	/* Read the data from the MII data register */
 	return readl(priv->ioaddr + mii_data) & GENMASK(15, 0);
 }

 static int stmmac_xgmac2_mdio_write(struct mii_bus *bus, int phyaddr,
 				    int phyreg, u16 phydata)
 {
 	struct net_device *ndev = bus->priv;
 	struct stmmac_priv *priv = netdev_priv(ndev);
 	unsigned int mii_address = priv->hw->mii.addr;
 	unsigned int mii_data = priv->hw->mii.data;
 	u32 addr, tmp, value = MII_XGMAC_BUSY;
 	int ret;

 	if (phyreg & MII_ADDR_C45) {
 		return -EOPNOTSUPP;
 	} else {
 		ret = stmmac_xgmac2_c22_format(priv, phyaddr, phyreg, &addr);
 		if (ret)
 			return ret;
 	}

 	value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
 		& priv->hw->mii.clk_csr_mask;
 	value |= phydata | MII_XGMAC_SADDR;
 	value |= MII_XGMAC_WRITE;

 	/* Wait until any existing MII operation is complete */
 	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
 			       !(tmp & MII_XGMAC_BUSY), 100, 10000))
 		return -EBUSY;

 	/* Set the MII address register to write */
 	writel(addr, priv->ioaddr + mii_address);
 	writel(value, priv->ioaddr + mii_data);

 	/* Wait until any existing MII operation is complete */
 	return readl_poll_timeout(priv->ioaddr + mii_data, tmp,
 				  !(tmp & MII_XGMAC_BUSY), 100, 10000);
 }

 /**
  * stmmac_mdio_read
  * @bus: points to the mii_bus structure
  * @phyaddr: MII addr
  * @phyreg: MII reg
  * Description: it reads data from the MII register from within the phy device.
  * For the 7111 GMAC, we must set the bit 0 in the MII address register while
  * accessing the PHY registers.
  * Fortunately, it seems this has no drawback for the 7109 MAC.
  */
 static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
 {
 	struct net_device *ndev = bus->priv;
 	struct stmmac_priv *priv = netdev_priv(ndev);
 	unsigned int mii_address = priv->hw->mii.addr;
 	unsigned int mii_data = priv->hw->mii.data;
 	u32 v;
 	int data;
 	u32 value = MII_BUSY;

 	value |= (phyaddr << priv->hw->mii.addr_shift)
 		& priv->hw->mii.addr_mask;
 	value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
 	value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
 		& priv->hw->mii.clk_csr_mask;
 	if (priv->plat->has_gmac4)
 		value |= MII_GMAC4_READ;

 	if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
 			       100, 10000))
 		return -EBUSY;

 	writel(value, priv->ioaddr + mii_address);

 	if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
 			       100, 10000))
 		return -EBUSY;

 	/* Read the data from the MII data register */
 	data = (int)readl(priv->ioaddr + mii_data);

 	return data;
 }

 /**
  * stmmac_mdio_write
  * @bus: points to the mii_bus structure
  * @phyaddr: MII addr
  * @phyreg: MII reg
  * @phydata: phy data
  * Description: it writes the data into the MII register from within the device.
  */
 static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
 			     u16 phydata)
 {
 	struct net_device *ndev = bus->priv;
 	struct stmmac_priv *priv = netdev_priv(ndev);
 	unsigned int mii_address = priv->hw->mii.addr;
 	unsigned int mii_data = priv->hw->mii.data;
 	u32 v;
 	u32 value = MII_BUSY;

 	value |= (phyaddr << priv->hw->mii.addr_shift)
 		& priv->hw->mii.addr_mask;
 	value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;

 	value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
 		& priv->hw->mii.clk_csr_mask;
 	if (priv->plat->has_gmac4)
 		value |= MII_GMAC4_WRITE;
 	else
 		value |= MII_WRITE;

 	/* Wait until any existing MII operation is complete */
 	if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
 			       100, 10000))
 		return -EBUSY;

 	/* Set the MII address register to write */
 	writel(phydata, priv->ioaddr + mii_data);
 	writel(value, priv->ioaddr + mii_address);

 	/* Wait until any existing MII operation is complete */
 	return readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
 				  100, 10000);
 }

 /**
  * stmmac_mdio_reset
  * @bus: points to the mii_bus structure
  * Description: reset the MII bus
  */
 int stmmac_mdio_reset(struct mii_bus *bus)
 {
 #if defined(CONFIG_STMMAC_PLATFORM)
 	struct net_device *ndev = bus->priv;
 	struct stmmac_priv *priv = netdev_priv(ndev);
 	unsigned int mii_address = priv->hw->mii.addr;
 	struct stmmac_mdio_bus_data *data = priv->plat->mdio_bus_data;

 #ifdef CONFIG_OF
 	if (priv->device->of_node) {
 		if (data->reset_gpio < 0) {
 			struct device_node *np = priv->device->of_node;

 			if (!np)
 				return 0;

 			data->reset_gpio = of_get_named_gpio(np,
 						"snps,reset-gpio", 0);
 			if (data->reset_gpio < 0)
 				return 0;

 			data->active_low = of_property_read_bool(np,
 						"snps,reset-active-low");
 			of_property_read_u32_array(np,
 				"snps,reset-delays-us", data->delays, 3);

 			if (gpio_request(data->reset_gpio, "mdio-reset"))
 				return 0;
 		}

 		gpio_direction_output(data->reset_gpio,
 				      data->active_low ? 1 : 0);
 		if (data->delays[0])
 			msleep(DIV_ROUND_UP(data->delays[0], 1000));

 		gpio_set_value(data->reset_gpio, data->active_low ? 0 : 1);
 		if (data->delays[1])
 			msleep(DIV_ROUND_UP(data->delays[1], 1000));

 		gpio_set_value(data->reset_gpio, data->active_low ? 1 : 0);
 		if (data->delays[2])
 			msleep(DIV_ROUND_UP(data->delays[2], 1000));
 	}
 #endif

 	if (data->phy_reset) {
 		netdev_dbg(ndev, "stmmac_mdio_reset: calling phy_reset\n");
 		data->phy_reset(priv->plat->bsp_priv);
 	}

 	/* This is a workaround for problems with the STE101P PHY.
 	 * It doesn't complete its reset until at least one clock cycle
 	 * on MDC, so perform a dummy mdio read. To be updated for GMAC4
 	 * if needed.
 	 */
 	if (!priv->plat->has_gmac4)
 		writel(0, priv->ioaddr + mii_address);
 #endif
 	return 0;
 }

 /**
  * stmmac_mdio_register
  * @ndev: net device structure
  * Description: it registers the MII bus
  */
 int stmmac_mdio_register(struct net_device *ndev)
 {
 	int err = 0;
 	struct mii_bus *new_bus;
 	struct stmmac_priv *priv = netdev_priv(ndev);
 	struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
 	struct device_node *mdio_node = priv->plat->mdio_node;
 	struct device *dev = ndev->dev.parent;
 	int addr, found, max_addr;

 	if (!mdio_bus_data)
 		return 0;

 	new_bus = mdiobus_alloc();
 	if (!new_bus)
 		return -ENOMEM;

 	if (mdio_bus_data->irqs)
 		memcpy(new_bus->irq, mdio_bus_data->irqs, sizeof(new_bus->irq));

 #ifdef CONFIG_OF
 	if (priv->device->of_node)
 		mdio_bus_data->reset_gpio = -1;
 #endif

 	new_bus->name = "stmmac";

 	if (priv->plat->has_xgmac) {
 		new_bus->read = &stmmac_xgmac2_mdio_read;
 		new_bus->write = &stmmac_xgmac2_mdio_write;

 		/* Right now only C22 phys are supported */
 		max_addr = MII_XGMAC_MAX_C22ADDR + 1;

 		/* Check if DT specified an unsupported phy addr */
 		if (priv->plat->phy_addr > MII_XGMAC_MAX_C22ADDR)
 			dev_err(dev, "Unsupported phy_addr (max=%d)\n",
 					MII_XGMAC_MAX_C22ADDR);
 	} else {
 		new_bus->read = &stmmac_mdio_read;
 		new_bus->write = &stmmac_mdio_write;
 		max_addr = PHY_MAX_ADDR;
 	}

 	new_bus->reset = &stmmac_mdio_reset;
 	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%s-%x",
 		 new_bus->name, priv->plat->bus_id);
 	new_bus->priv = ndev;
 	new_bus->phy_mask = mdio_bus_data->phy_mask;
 	new_bus->parent = priv->device;

 	err = of_mdiobus_register(new_bus, mdio_node);
 	if (err != 0) {
 		dev_err(dev, "Cannot register the MDIO bus\n");
 		goto bus_register_fail;
 	}

 	if (priv->plat->phy_node || mdio_node)
 		goto bus_register_done;

 	found = 0;
 	for (addr = 0; addr < max_addr; addr++) {
 		struct phy_device *phydev = mdiobus_get_phy(new_bus, addr);

 		if (!phydev)
 			continue;

 		/*
 		 * If an IRQ was provided to be assigned after
 		 * the bus probe, do it here.
 		 */
 		if (!mdio_bus_data->irqs &&
 		    (mdio_bus_data->probed_phy_irq > 0)) {
 			new_bus->irq[addr] = mdio_bus_data->probed_phy_irq;
 			phydev->irq = mdio_bus_data->probed_phy_irq;
 		}

 		/*
 		 * If we're going to bind the MAC to this PHY bus,
 		 * and no PHY number was provided to the MAC,
 		 * use the one probed here.
 		 */
 		if (priv->plat->phy_addr == -1)
 			priv->plat->phy_addr = addr;

 		phy_attached_info(phydev);
 		found = 1;
 	}

 	if (!found && !mdio_node) {
 		dev_warn(dev, "No PHY found\n");
 		mdiobus_unregister(new_bus);
 		mdiobus_free(new_bus);
 		return -ENODEV;
 	}

 bus_register_done:
 	priv->mii = new_bus;

 	return 0;

 bus_register_fail:
 	mdiobus_free(new_bus);
 	return err;
 }

 /**
  * stmmac_mdio_unregister
  * @ndev: net device structure
  * Description: it unregisters the MII bus
  */
 int stmmac_mdio_unregister(struct net_device *ndev)
 {
 	struct stmmac_priv *priv = netdev_priv(ndev);

 	if (!priv->mii)
 		return 0;

 	mdiobus_unregister(priv->mii);
 	priv->mii->priv = NULL;
 	mdiobus_free(priv->mii);
 	priv->mii = NULL;

 	return 0;
 }
	/*******************************************************************************
	STMMAC Ethernet Driver -- MDIO bus implementation
	Provides Bus interface for MII registers

	Copyright (C) 2007-2009 STMicroelectronics Ltd

	This program is free software; you can redistribute it and/or modify it
	under the terms and conditions of the GNU General Public License,
	version 2, as published by the Free Software Foundation.

	This program is distributed in the hope it will be useful, but WITHOUT
	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	more details.

	The full GNU General Public License is included in this distribution in
	the file called "COPYING".

	Author: Carl Shaw <carl.shaw@st.com>
	Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com>
	*******************************************************************************/

	#include <linux/io.h>
	#include <linux/iopoll.h>
	#include <linux/mii.h>
	#include <linux/of.h>
	#include <linux/of_gpio.h>
	#include <linux/of_mdio.h>
	#include <linux/phy.h>
	#include <linux/slab.h>

	#include "dwxgmac2.h"
	#include "stmmac.h"

	#define MII_BUSY 0x00000001
	#define MII_WRITE 0x00000002

	/* GMAC4 defines */
	#define MII_GMAC4_GOC_SHIFT 2
	#define MII_GMAC4_WRITE (1 << MII_GMAC4_GOC_SHIFT)
	#define MII_GMAC4_READ (3 << MII_GMAC4_GOC_SHIFT)

	/* XGMAC defines */
	#define MII_XGMAC_SADDR BIT(18)
	#define MII_XGMAC_CMD_SHIFT 16
	#define MII_XGMAC_WRITE (1 << MII_XGMAC_CMD_SHIFT)
	#define MII_XGMAC_READ (3 << MII_XGMAC_CMD_SHIFT)
	#define MII_XGMAC_BUSY BIT(22)
	#define MII_XGMAC_MAX_C22ADDR 3
	#define MII_XGMAC_C22P_MASK GENMASK(MII_XGMAC_MAX_C22ADDR, 0)

	static int stmmac_xgmac2_c22_format(struct stmmac_priv *priv, int phyaddr,
	int phyreg, u32 *hw_addr)
	{
	unsigned int mii_data = priv->hw->mii.data;
	u32 tmp;

	/* HW does not support C22 addr >= 4 */
	if (phyaddr > MII_XGMAC_MAX_C22ADDR)
	return -ENODEV;
	/* Wait until any existing MII operation is complete */
	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
	!(tmp & MII_XGMAC_BUSY), 100, 10000))
	return -EBUSY;

	/* Set port as Clause 22 */
	tmp = readl(priv->ioaddr + XGMAC_MDIO_C22P);
	tmp &= ~MII_XGMAC_C22P_MASK;
	tmp \|= BIT(phyaddr);
	writel(tmp, priv->ioaddr + XGMAC_MDIO_C22P);

	*hw_addr = (phyaddr << 16) \| (phyreg & 0x1f);
	return 0;
	}

	static int stmmac_xgmac2_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
	{
	struct net_device *ndev = bus->priv;
	struct stmmac_priv *priv = netdev_priv(ndev);
	unsigned int mii_address = priv->hw->mii.addr;
	unsigned int mii_data = priv->hw->mii.data;
	u32 tmp, addr, value = MII_XGMAC_BUSY;
	int ret;

	if (phyreg & MII_ADDR_C45) {
	return -EOPNOTSUPP;
	} else {
	ret = stmmac_xgmac2_c22_format(priv, phyaddr, phyreg, &addr);
	if (ret)
	return ret;
	}

	value \|= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
	& priv->hw->mii.clk_csr_mask;
	value \|= MII_XGMAC_SADDR \| MII_XGMAC_READ;

	/* Wait until any existing MII operation is complete */
	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
	!(tmp & MII_XGMAC_BUSY), 100, 10000))
	return -EBUSY;

	/* Set the MII address register to read */
	writel(addr, priv->ioaddr + mii_address);
	writel(value, priv->ioaddr + mii_data);

	/* Wait until any existing MII operation is complete */
	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
	!(tmp & MII_XGMAC_BUSY), 100, 10000))
	return -EBUSY;

	/* Read the data from the MII data register */
	return readl(priv->ioaddr + mii_data) & GENMASK(15, 0);
	}

	static int stmmac_xgmac2_mdio_write(struct mii_bus *bus, int phyaddr,
	int phyreg, u16 phydata)
	{
	struct net_device *ndev = bus->priv;
	struct stmmac_priv *priv = netdev_priv(ndev);
	unsigned int mii_address = priv->hw->mii.addr;
	unsigned int mii_data = priv->hw->mii.data;
	u32 addr, tmp, value = MII_XGMAC_BUSY;
	int ret;

	if (phyreg & MII_ADDR_C45) {
	return -EOPNOTSUPP;
	} else {
	ret = stmmac_xgmac2_c22_format(priv, phyaddr, phyreg, &addr);
	if (ret)
	return ret;
	}

	value \|= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
	& priv->hw->mii.clk_csr_mask;
	value \|= phydata \| MII_XGMAC_SADDR;
	value \|= MII_XGMAC_WRITE;

	/* Wait until any existing MII operation is complete */
	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
	!(tmp & MII_XGMAC_BUSY), 100, 10000))
	return -EBUSY;

	/* Set the MII address register to write */
	writel(addr, priv->ioaddr + mii_address);
	writel(value, priv->ioaddr + mii_data);

	/* Wait until any existing MII operation is complete */
	return readl_poll_timeout(priv->ioaddr + mii_data, tmp,
	!(tmp & MII_XGMAC_BUSY), 100, 10000);
	}

	/**
	* stmmac_mdio_read
	* @bus: points to the mii_bus structure
	* @phyaddr: MII addr
	* @phyreg: MII reg
	* Description: it reads data from the MII register from within the phy device.
	* For the 7111 GMAC, we must set the bit 0 in the MII address register while
	* accessing the PHY registers.
	* Fortunately, it seems this has no drawback for the 7109 MAC.
	*/
	static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
	{
	struct net_device *ndev = bus->priv;
	struct stmmac_priv *priv = netdev_priv(ndev);
	unsigned int mii_address = priv->hw->mii.addr;
	unsigned int mii_data = priv->hw->mii.data;
	u32 v;
	int data;
	u32 value = MII_BUSY;

	value \|= (phyaddr << priv->hw->mii.addr_shift)
	& priv->hw->mii.addr_mask;
	value \|= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
	value \|= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
	& priv->hw->mii.clk_csr_mask;
	if (priv->plat->has_gmac4)
	value \|= MII_GMAC4_READ;

	if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
	100, 10000))
	return -EBUSY;

	writel(value, priv->ioaddr + mii_address);

	if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
	100, 10000))
	return -EBUSY;

	/* Read the data from the MII data register */
	data = (int)readl(priv->ioaddr + mii_data);

	return data;
	}

	/**
	* stmmac_mdio_write
	* @bus: points to the mii_bus structure
	* @phyaddr: MII addr
	* @phyreg: MII reg
	* @phydata: phy data
	* Description: it writes the data into the MII register from within the device.
	*/
	static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
	u16 phydata)
	{
	struct net_device *ndev = bus->priv;
	struct stmmac_priv *priv = netdev_priv(ndev);
	unsigned int mii_address = priv->hw->mii.addr;
	unsigned int mii_data = priv->hw->mii.data;
	u32 v;
	u32 value = MII_BUSY;

	value \|= (phyaddr << priv->hw->mii.addr_shift)
	& priv->hw->mii.addr_mask;
	value \|= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;

	value \|= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
	& priv->hw->mii.clk_csr_mask;
	if (priv->plat->has_gmac4)
	value \|= MII_GMAC4_WRITE;
	else
	value \|= MII_WRITE;

	/* Wait until any existing MII operation is complete */
	if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
	100, 10000))
	return -EBUSY;

	/* Set the MII address register to write */
	writel(phydata, priv->ioaddr + mii_data);
	writel(value, priv->ioaddr + mii_address);

	/* Wait until any existing MII operation is complete */
	return readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
	100, 10000);
	}

	/**
	* stmmac_mdio_reset
	* @bus: points to the mii_bus structure
	* Description: reset the MII bus
	*/
	int stmmac_mdio_reset(struct mii_bus *bus)
	{
	#if defined(CONFIG_STMMAC_PLATFORM)
	struct net_device *ndev = bus->priv;
	struct stmmac_priv *priv = netdev_priv(ndev);
	unsigned int mii_address = priv->hw->mii.addr;
	struct stmmac_mdio_bus_data *data = priv->plat->mdio_bus_data;

	#ifdef CONFIG_OF
	if (priv->device->of_node) {
	if (data->reset_gpio < 0) {
	struct device_node *np = priv->device->of_node;

	if (!np)
	return 0;

	data->reset_gpio = of_get_named_gpio(np,
	"snps,reset-gpio", 0);
	if (data->reset_gpio < 0)
	return 0;

	data->active_low = of_property_read_bool(np,
	"snps,reset-active-low");
	of_property_read_u32_array(np,
	"snps,reset-delays-us", data->delays, 3);

	if (gpio_request(data->reset_gpio, "mdio-reset"))
	return 0;
	}

	gpio_direction_output(data->reset_gpio,
	data->active_low ? 1 : 0);
	if (data->delays[0])
	msleep(DIV_ROUND_UP(data->delays[0], 1000));

	gpio_set_value(data->reset_gpio, data->active_low ? 0 : 1);
	if (data->delays[1])
	msleep(DIV_ROUND_UP(data->delays[1], 1000));

	gpio_set_value(data->reset_gpio, data->active_low ? 1 : 0);
	if (data->delays[2])
	msleep(DIV_ROUND_UP(data->delays[2], 1000));
	}
	#endif

	if (data->phy_reset) {
	netdev_dbg(ndev, "stmmac_mdio_reset: calling phy_reset\n");
	data->phy_reset(priv->plat->bsp_priv);
	}

	/* This is a workaround for problems with the STE101P PHY.
	* It doesn't complete its reset until at least one clock cycle
	* on MDC, so perform a dummy mdio read. To be updated for GMAC4
	* if needed.
	*/
	if (!priv->plat->has_gmac4)
	writel(0, priv->ioaddr + mii_address);
	#endif
	return 0;
	}

	/**
	* stmmac_mdio_register
	* @ndev: net device structure
	* Description: it registers the MII bus
	*/
	int stmmac_mdio_register(struct net_device *ndev)
	{
	int err = 0;
	struct mii_bus *new_bus;
	struct stmmac_priv *priv = netdev_priv(ndev);
	struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
	struct device_node *mdio_node = priv->plat->mdio_node;
	struct device *dev = ndev->dev.parent;
	int addr, found, max_addr;

	if (!mdio_bus_data)
	return 0;

	new_bus = mdiobus_alloc();
	if (!new_bus)
	return -ENOMEM;

	if (mdio_bus_data->irqs)
	memcpy(new_bus->irq, mdio_bus_data->irqs, sizeof(new_bus->irq));

	#ifdef CONFIG_OF
	if (priv->device->of_node)
	mdio_bus_data->reset_gpio = -1;
	#endif

	new_bus->name = "stmmac";

	if (priv->plat->has_xgmac) {
	new_bus->read = &stmmac_xgmac2_mdio_read;
	new_bus->write = &stmmac_xgmac2_mdio_write;

	/* Right now only C22 phys are supported */
	max_addr = MII_XGMAC_MAX_C22ADDR + 1;

	/* Check if DT specified an unsupported phy addr */
	if (priv->plat->phy_addr > MII_XGMAC_MAX_C22ADDR)
	dev_err(dev, "Unsupported phy_addr (max=%d)\n",
	MII_XGMAC_MAX_C22ADDR);
	} else {
	new_bus->read = &stmmac_mdio_read;
	new_bus->write = &stmmac_mdio_write;
	max_addr = PHY_MAX_ADDR;
	}

	new_bus->reset = &stmmac_mdio_reset;
	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%s-%x",
	new_bus->name, priv->plat->bus_id);
	new_bus->priv = ndev;
	new_bus->phy_mask = mdio_bus_data->phy_mask;
	new_bus->parent = priv->device;

	err = of_mdiobus_register(new_bus, mdio_node);
	if (err != 0) {
	dev_err(dev, "Cannot register the MDIO bus\n");
	goto bus_register_fail;
	}

	if (priv->plat->phy_node \|\| mdio_node)
	goto bus_register_done;

	found = 0;
	for (addr = 0; addr < max_addr; addr++) {
	struct phy_device *phydev = mdiobus_get_phy(new_bus, addr);

	if (!phydev)
	continue;

	/*
	* If an IRQ was provided to be assigned after
	* the bus probe, do it here.
	*/
	if (!mdio_bus_data->irqs &&
	(mdio_bus_data->probed_phy_irq > 0)) {
	new_bus->irq[addr] = mdio_bus_data->probed_phy_irq;
	phydev->irq = mdio_bus_data->probed_phy_irq;
	}

	/*
	* If we're going to bind the MAC to this PHY bus,
	* and no PHY number was provided to the MAC,
	* use the one probed here.
	*/
	if (priv->plat->phy_addr == -1)
	priv->plat->phy_addr = addr;

	phy_attached_info(phydev);
	found = 1;
	}

	if (!found && !mdio_node) {
	dev_warn(dev, "No PHY found\n");
	mdiobus_unregister(new_bus);
	mdiobus_free(new_bus);
	return -ENODEV;
	}

	bus_register_done:
	priv->mii = new_bus;

	return 0;

	bus_register_fail:
	mdiobus_free(new_bus);
	return err;
	}

	/**
	* stmmac_mdio_unregister
	* @ndev: net device structure
	* Description: it unregisters the MII bus
	*/
	int stmmac_mdio_unregister(struct net_device *ndev)
	{
	struct stmmac_priv *priv = netdev_priv(ndev);

	if (!priv->mii)
	return 0;

	mdiobus_unregister(priv->mii);
	priv->mii->priv = NULL;
	mdiobus_free(priv->mii);
	priv->mii = NULL;

	return 0;
	}