| /* |
| * Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz> |
| * Copyright (c) 2001-2002, 2007 Johann Deneux <johann.deneux@gmail.com> |
| * |
| * USB/RS232 I-Force joysticks and wheels. |
| */ |
| |
| /* |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include "iforce.h" |
| |
| MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>, Johann Deneux <johann.deneux@gmail.com>"); |
| MODULE_DESCRIPTION("USB/RS232 I-Force joysticks and wheels driver"); |
| MODULE_LICENSE("GPL"); |
| |
| static signed short btn_joystick[] = |
| { BTN_TRIGGER, BTN_TOP, BTN_THUMB, BTN_TOP2, BTN_BASE, |
| BTN_BASE2, BTN_BASE3, BTN_BASE4, BTN_BASE5, BTN_A, |
| BTN_B, BTN_C, BTN_DEAD, -1 }; |
| |
| static signed short btn_joystick_avb[] = |
| { BTN_TRIGGER, BTN_THUMB, BTN_TOP, BTN_TOP2, BTN_BASE, |
| BTN_BASE2, BTN_BASE3, BTN_BASE4, BTN_DEAD, -1 }; |
| |
| static signed short btn_wheel[] = |
| { BTN_GEAR_DOWN, BTN_GEAR_UP, BTN_BASE, BTN_BASE2, BTN_BASE3, |
| BTN_BASE4, BTN_BASE5, BTN_BASE6, -1 }; |
| |
| static signed short abs_joystick[] = |
| { ABS_X, ABS_Y, ABS_THROTTLE, ABS_HAT0X, ABS_HAT0Y, -1 }; |
| |
| static signed short abs_joystick_rudder[] = |
| { ABS_X, ABS_Y, ABS_THROTTLE, ABS_RUDDER, ABS_HAT0X, ABS_HAT0Y, -1 }; |
| |
| static signed short abs_avb_pegasus[] = |
| { ABS_X, ABS_Y, ABS_THROTTLE, ABS_RUDDER, ABS_HAT0X, ABS_HAT0Y, |
| ABS_HAT1X, ABS_HAT1Y, -1 }; |
| |
| static signed short abs_wheel[] = |
| { ABS_WHEEL, ABS_GAS, ABS_BRAKE, ABS_HAT0X, ABS_HAT0Y, -1 }; |
| |
| static signed short ff_iforce[] = |
| { FF_PERIODIC, FF_CONSTANT, FF_SPRING, FF_DAMPER, |
| FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP, FF_SAW_DOWN, FF_GAIN, |
| FF_AUTOCENTER, -1 }; |
| |
| static struct iforce_device iforce_device[] = { |
| { 0x044f, 0xa01c, "Thrustmaster Motor Sport GT", btn_wheel, abs_wheel, ff_iforce }, |
| { 0x046d, 0xc281, "Logitech WingMan Force", btn_joystick, abs_joystick, ff_iforce }, |
| { 0x046d, 0xc291, "Logitech WingMan Formula Force", btn_wheel, abs_wheel, ff_iforce }, |
| { 0x05ef, 0x020a, "AVB Top Shot Pegasus", btn_joystick_avb, abs_avb_pegasus, ff_iforce }, |
| { 0x05ef, 0x8884, "AVB Mag Turbo Force", btn_wheel, abs_wheel, ff_iforce }, |
| { 0x05ef, 0x8888, "AVB Top Shot Force Feedback Racing Wheel", btn_wheel, abs_wheel, ff_iforce }, //? |
| { 0x061c, 0xc0a4, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce }, //? |
| { 0x061c, 0xc084, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce }, |
| { 0x06f8, 0x0001, "Guillemot Race Leader Force Feedback", btn_wheel, abs_wheel, ff_iforce }, //? |
| { 0x06f8, 0x0001, "Guillemot Jet Leader Force Feedback", btn_joystick, abs_joystick_rudder, ff_iforce }, |
| { 0x06f8, 0x0004, "Guillemot Force Feedback Racing Wheel", btn_wheel, abs_wheel, ff_iforce }, //? |
| { 0x06f8, 0xa302, "Guillemot Jet Leader 3D", btn_joystick, abs_joystick, ff_iforce }, //? |
| { 0x06d6, 0x29bc, "Trust Force Feedback Race Master", btn_wheel, abs_wheel, ff_iforce }, |
| { 0x0000, 0x0000, "Unknown I-Force Device [%04x:%04x]", btn_joystick, abs_joystick, ff_iforce } |
| }; |
| |
| static int iforce_playback(struct input_dev *dev, int effect_id, int value) |
| { |
| struct iforce *iforce = input_get_drvdata(dev); |
| struct iforce_core_effect *core_effect = &iforce->core_effects[effect_id]; |
| |
| if (value > 0) |
| set_bit(FF_CORE_SHOULD_PLAY, core_effect->flags); |
| else |
| clear_bit(FF_CORE_SHOULD_PLAY, core_effect->flags); |
| |
| iforce_control_playback(iforce, effect_id, value); |
| return 0; |
| } |
| |
| static void iforce_set_gain(struct input_dev *dev, u16 gain) |
| { |
| struct iforce *iforce = input_get_drvdata(dev); |
| unsigned char data[3]; |
| |
| data[0] = gain >> 9; |
| iforce_send_packet(iforce, FF_CMD_GAIN, data); |
| } |
| |
| static void iforce_set_autocenter(struct input_dev *dev, u16 magnitude) |
| { |
| struct iforce *iforce = input_get_drvdata(dev); |
| unsigned char data[3]; |
| |
| data[0] = 0x03; |
| data[1] = magnitude >> 9; |
| iforce_send_packet(iforce, FF_CMD_AUTOCENTER, data); |
| |
| data[0] = 0x04; |
| data[1] = 0x01; |
| iforce_send_packet(iforce, FF_CMD_AUTOCENTER, data); |
| } |
| |
| /* |
| * Function called when an ioctl is performed on the event dev entry. |
| * It uploads an effect to the device |
| */ |
| static int iforce_upload_effect(struct input_dev *dev, struct ff_effect *effect, struct ff_effect *old) |
| { |
| struct iforce *iforce = input_get_drvdata(dev); |
| struct iforce_core_effect *core_effect = &iforce->core_effects[effect->id]; |
| int ret; |
| |
| if (__test_and_set_bit(FF_CORE_IS_USED, core_effect->flags)) { |
| /* Check the effect is not already being updated */ |
| if (test_bit(FF_CORE_UPDATE, core_effect->flags)) |
| return -EAGAIN; |
| } |
| |
| /* |
| * Upload the effect |
| */ |
| switch (effect->type) { |
| |
| case FF_PERIODIC: |
| ret = iforce_upload_periodic(iforce, effect, old); |
| break; |
| |
| case FF_CONSTANT: |
| ret = iforce_upload_constant(iforce, effect, old); |
| break; |
| |
| case FF_SPRING: |
| case FF_DAMPER: |
| ret = iforce_upload_condition(iforce, effect, old); |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| if (ret == 0) { |
| /* A packet was sent, forbid new updates until we are notified |
| * that the packet was updated |
| */ |
| set_bit(FF_CORE_UPDATE, core_effect->flags); |
| } |
| return ret; |
| } |
| |
| /* |
| * Erases an effect: it frees the effect id and mark as unused the memory |
| * allocated for the parameters |
| */ |
| static int iforce_erase_effect(struct input_dev *dev, int effect_id) |
| { |
| struct iforce *iforce = input_get_drvdata(dev); |
| struct iforce_core_effect *core_effect = &iforce->core_effects[effect_id]; |
| int err = 0; |
| |
| if (test_bit(FF_MOD1_IS_USED, core_effect->flags)) |
| err = release_resource(&core_effect->mod1_chunk); |
| |
| if (!err && test_bit(FF_MOD2_IS_USED, core_effect->flags)) |
| err = release_resource(&core_effect->mod2_chunk); |
| |
| /* TODO: remember to change that if more FF_MOD* bits are added */ |
| core_effect->flags[0] = 0; |
| |
| return err; |
| } |
| |
| static int iforce_open(struct input_dev *dev) |
| { |
| struct iforce *iforce = input_get_drvdata(dev); |
| |
| switch (iforce->bus) { |
| #ifdef CONFIG_JOYSTICK_IFORCE_USB |
| case IFORCE_USB: |
| iforce->irq->dev = iforce->usbdev; |
| if (usb_submit_urb(iforce->irq, GFP_KERNEL)) |
| return -EIO; |
| break; |
| #endif |
| } |
| |
| if (test_bit(EV_FF, dev->evbit)) { |
| /* Enable force feedback */ |
| iforce_send_packet(iforce, FF_CMD_ENABLE, "\004"); |
| } |
| |
| return 0; |
| } |
| |
| static void iforce_close(struct input_dev *dev) |
| { |
| struct iforce *iforce = input_get_drvdata(dev); |
| int i; |
| |
| if (test_bit(EV_FF, dev->evbit)) { |
| /* Check: no effects should be present in memory */ |
| for (i = 0; i < dev->ff->max_effects; i++) { |
| if (test_bit(FF_CORE_IS_USED, iforce->core_effects[i].flags)) { |
| dev_warn(&dev->dev, |
| "%s: Device still owns effects\n", |
| __func__); |
| break; |
| } |
| } |
| |
| /* Disable force feedback playback */ |
| iforce_send_packet(iforce, FF_CMD_ENABLE, "\001"); |
| /* Wait for the command to complete */ |
| wait_event_interruptible(iforce->wait, |
| !test_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags)); |
| } |
| |
| switch (iforce->bus) { |
| #ifdef CONFIG_JOYSTICK_IFORCE_USB |
| case IFORCE_USB: |
| usb_kill_urb(iforce->irq); |
| usb_kill_urb(iforce->out); |
| usb_kill_urb(iforce->ctrl); |
| break; |
| #endif |
| #ifdef CONFIG_JOYSTICK_IFORCE_232 |
| case IFORCE_232: |
| //TODO: Wait for the last packets to be sent |
| break; |
| #endif |
| } |
| } |
| |
| int iforce_init_device(struct iforce *iforce) |
| { |
| struct input_dev *input_dev; |
| struct ff_device *ff; |
| unsigned char c[] = "CEOV"; |
| int i, error; |
| int ff_effects = 0; |
| |
| input_dev = input_allocate_device(); |
| if (!input_dev) |
| return -ENOMEM; |
| |
| init_waitqueue_head(&iforce->wait); |
| spin_lock_init(&iforce->xmit_lock); |
| mutex_init(&iforce->mem_mutex); |
| iforce->xmit.buf = iforce->xmit_data; |
| iforce->dev = input_dev; |
| |
| /* |
| * Input device fields. |
| */ |
| |
| switch (iforce->bus) { |
| #ifdef CONFIG_JOYSTICK_IFORCE_USB |
| case IFORCE_USB: |
| input_dev->id.bustype = BUS_USB; |
| input_dev->dev.parent = &iforce->usbdev->dev; |
| break; |
| #endif |
| #ifdef CONFIG_JOYSTICK_IFORCE_232 |
| case IFORCE_232: |
| input_dev->id.bustype = BUS_RS232; |
| input_dev->dev.parent = &iforce->serio->dev; |
| break; |
| #endif |
| } |
| |
| input_set_drvdata(input_dev, iforce); |
| |
| input_dev->name = "Unknown I-Force device"; |
| input_dev->open = iforce_open; |
| input_dev->close = iforce_close; |
| |
| /* |
| * On-device memory allocation. |
| */ |
| |
| iforce->device_memory.name = "I-Force device effect memory"; |
| iforce->device_memory.start = 0; |
| iforce->device_memory.end = 200; |
| iforce->device_memory.flags = IORESOURCE_MEM; |
| iforce->device_memory.parent = NULL; |
| iforce->device_memory.child = NULL; |
| iforce->device_memory.sibling = NULL; |
| |
| /* |
| * Wait until device ready - until it sends its first response. |
| */ |
| |
| for (i = 0; i < 20; i++) |
| if (!iforce_get_id_packet(iforce, "O")) |
| break; |
| |
| if (i == 20) { /* 5 seconds */ |
| dev_err(&input_dev->dev, |
| "Timeout waiting for response from device.\n"); |
| error = -ENODEV; |
| goto fail; |
| } |
| |
| /* |
| * Get device info. |
| */ |
| |
| if (!iforce_get_id_packet(iforce, "M")) |
| input_dev->id.vendor = (iforce->edata[2] << 8) | iforce->edata[1]; |
| else |
| dev_warn(&iforce->dev->dev, "Device does not respond to id packet M\n"); |
| |
| if (!iforce_get_id_packet(iforce, "P")) |
| input_dev->id.product = (iforce->edata[2] << 8) | iforce->edata[1]; |
| else |
| dev_warn(&iforce->dev->dev, "Device does not respond to id packet P\n"); |
| |
| if (!iforce_get_id_packet(iforce, "B")) |
| iforce->device_memory.end = (iforce->edata[2] << 8) | iforce->edata[1]; |
| else |
| dev_warn(&iforce->dev->dev, "Device does not respond to id packet B\n"); |
| |
| if (!iforce_get_id_packet(iforce, "N")) |
| ff_effects = iforce->edata[1]; |
| else |
| dev_warn(&iforce->dev->dev, "Device does not respond to id packet N\n"); |
| |
| /* Check if the device can store more effects than the driver can really handle */ |
| if (ff_effects > IFORCE_EFFECTS_MAX) { |
| dev_warn(&iforce->dev->dev, "Limiting number of effects to %d (device reports %d)\n", |
| IFORCE_EFFECTS_MAX, ff_effects); |
| ff_effects = IFORCE_EFFECTS_MAX; |
| } |
| |
| /* |
| * Display additional info. |
| */ |
| |
| for (i = 0; c[i]; i++) |
| if (!iforce_get_id_packet(iforce, c + i)) |
| iforce_dump_packet(iforce, "info", iforce->ecmd, iforce->edata); |
| |
| /* |
| * Disable spring, enable force feedback. |
| */ |
| iforce_set_autocenter(input_dev, 0); |
| |
| /* |
| * Find appropriate device entry |
| */ |
| |
| for (i = 0; iforce_device[i].idvendor; i++) |
| if (iforce_device[i].idvendor == input_dev->id.vendor && |
| iforce_device[i].idproduct == input_dev->id.product) |
| break; |
| |
| iforce->type = iforce_device + i; |
| input_dev->name = iforce->type->name; |
| |
| /* |
| * Set input device bitfields and ranges. |
| */ |
| |
| input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) | |
| BIT_MASK(EV_FF_STATUS); |
| |
| for (i = 0; iforce->type->btn[i] >= 0; i++) |
| set_bit(iforce->type->btn[i], input_dev->keybit); |
| |
| for (i = 0; iforce->type->abs[i] >= 0; i++) { |
| |
| signed short t = iforce->type->abs[i]; |
| |
| switch (t) { |
| |
| case ABS_X: |
| case ABS_Y: |
| case ABS_WHEEL: |
| |
| input_set_abs_params(input_dev, t, -1920, 1920, 16, 128); |
| set_bit(t, input_dev->ffbit); |
| break; |
| |
| case ABS_THROTTLE: |
| case ABS_GAS: |
| case ABS_BRAKE: |
| |
| input_set_abs_params(input_dev, t, 0, 255, 0, 0); |
| break; |
| |
| case ABS_RUDDER: |
| |
| input_set_abs_params(input_dev, t, -128, 127, 0, 0); |
| break; |
| |
| case ABS_HAT0X: |
| case ABS_HAT0Y: |
| case ABS_HAT1X: |
| case ABS_HAT1Y: |
| |
| input_set_abs_params(input_dev, t, -1, 1, 0, 0); |
| break; |
| } |
| } |
| |
| if (ff_effects) { |
| |
| for (i = 0; iforce->type->ff[i] >= 0; i++) |
| set_bit(iforce->type->ff[i], input_dev->ffbit); |
| |
| error = input_ff_create(input_dev, ff_effects); |
| if (error) |
| goto fail; |
| |
| ff = input_dev->ff; |
| ff->upload = iforce_upload_effect; |
| ff->erase = iforce_erase_effect; |
| ff->set_gain = iforce_set_gain; |
| ff->set_autocenter = iforce_set_autocenter; |
| ff->playback = iforce_playback; |
| } |
| /* |
| * Register input device. |
| */ |
| |
| error = input_register_device(iforce->dev); |
| if (error) |
| goto fail; |
| |
| return 0; |
| |
| fail: input_free_device(input_dev); |
| return error; |
| } |
| |
| static int __init iforce_init(void) |
| { |
| int err = 0; |
| |
| #ifdef CONFIG_JOYSTICK_IFORCE_USB |
| err = usb_register(&iforce_usb_driver); |
| if (err) |
| return err; |
| #endif |
| #ifdef CONFIG_JOYSTICK_IFORCE_232 |
| err = serio_register_driver(&iforce_serio_drv); |
| #ifdef CONFIG_JOYSTICK_IFORCE_USB |
| if (err) |
| usb_deregister(&iforce_usb_driver); |
| #endif |
| #endif |
| return err; |
| } |
| |
| static void __exit iforce_exit(void) |
| { |
| #ifdef CONFIG_JOYSTICK_IFORCE_USB |
| usb_deregister(&iforce_usb_driver); |
| #endif |
| #ifdef CONFIG_JOYSTICK_IFORCE_232 |
| serio_unregister_driver(&iforce_serio_drv); |
| #endif |
| } |
| |
| module_init(iforce_init); |
| module_exit(iforce_exit); |