| Silicon Image SiI8620 HDMI/MHL bridge bindings |
| |
| Required properties: |
| - compatible: "sil,sii8620" |
| - reg: i2c address of the bridge |
| - cvcc10-supply: Digital Core Supply Voltage (1.0V) |
| - iovcc18-supply: I/O Supply Voltage (1.8V) |
| - interrupts: interrupt specifier of INT pin |
| - reset-gpios: gpio specifier of RESET pin |
| - clocks, clock-names: specification and name of "xtal" clock |
| - video interfaces: Device node can contain video interface port |
| node for HDMI encoder according to [1]. |
| |
| [1]: Documentation/devicetree/bindings/media/video-interfaces.txt |
| |
| Example: |
| sii8620@39 { |
| reg = <0x39>; |
| compatible = "sil,sii8620"; |
| cvcc10-supply = <&ldo36_reg>; |
| iovcc18-supply = <&ldo34_reg>; |
| interrupt-parent = <&gpf0>; |
| interrupts = <2 0>; |
| reset-gpio = <&gpv7 0 0>; |
| clocks = <&pmu_system_controller 0>; |
| clock-names = "xtal"; |
| |
| port { |
| mhl_to_hdmi: endpoint { |
| remote-endpoint = <&hdmi_to_mhl>; |
| }; |
| }; |
| }; |
