|  | /* | 
|  | *  PS3 gelic network driver. | 
|  | * | 
|  | * Copyright (C) 2007 Sony Computer Entertainment Inc. | 
|  | * Copyright 2007 Sony Corporation | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 | 
|  | * as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | */ | 
|  | #undef DEBUG | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/ethtool.h> | 
|  | #include <linux/if_vlan.h> | 
|  |  | 
|  | #include <linux/in.h> | 
|  | #include <linux/ip.h> | 
|  | #include <linux/tcp.h> | 
|  | #include <linux/wireless.h> | 
|  | #include <linux/ieee80211.h> | 
|  | #include <linux/if_arp.h> | 
|  | #include <linux/ctype.h> | 
|  | #include <linux/string.h> | 
|  | #include <net/iw_handler.h> | 
|  |  | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <net/checksum.h> | 
|  | #include <asm/firmware.h> | 
|  | #include <asm/ps3.h> | 
|  | #include <asm/lv1call.h> | 
|  |  | 
|  | #include "ps3_gelic_net.h" | 
|  | #include "ps3_gelic_wireless.h" | 
|  |  | 
|  |  | 
|  | static int gelic_wl_start_scan(struct gelic_wl_info *wl, int always_scan, | 
|  | u8 *essid, size_t essid_len); | 
|  | static int gelic_wl_try_associate(struct net_device *netdev); | 
|  |  | 
|  | /* | 
|  | * tables | 
|  | */ | 
|  |  | 
|  | /* 802.11b/g channel to freq in MHz */ | 
|  | static const int channel_freq[] = { | 
|  | 2412, 2417, 2422, 2427, 2432, | 
|  | 2437, 2442, 2447, 2452, 2457, | 
|  | 2462, 2467, 2472, 2484 | 
|  | }; | 
|  | #define NUM_CHANNELS ARRAY_SIZE(channel_freq) | 
|  |  | 
|  | /* in bps */ | 
|  | static const int bitrate_list[] = { | 
|  | 1000000, | 
|  | 2000000, | 
|  | 5500000, | 
|  | 11000000, | 
|  | 6000000, | 
|  | 9000000, | 
|  | 12000000, | 
|  | 18000000, | 
|  | 24000000, | 
|  | 36000000, | 
|  | 48000000, | 
|  | 54000000 | 
|  | }; | 
|  | #define NUM_BITRATES ARRAY_SIZE(bitrate_list) | 
|  |  | 
|  | /* | 
|  | * wpa2 support requires the hypervisor version 2.0 or later | 
|  | */ | 
|  | static inline int wpa2_capable(void) | 
|  | { | 
|  | return 0 <= ps3_compare_firmware_version(2, 0, 0); | 
|  | } | 
|  |  | 
|  | static inline int precise_ie(void) | 
|  | { | 
|  | return 0 <= ps3_compare_firmware_version(2, 2, 0); | 
|  | } | 
|  | /* | 
|  | * post_eurus_cmd helpers | 
|  | */ | 
|  | struct eurus_cmd_arg_info { | 
|  | int pre_arg; /* command requires arg1, arg2 at POST COMMAND */ | 
|  | int post_arg; /* command requires arg1, arg2 at GET_RESULT */ | 
|  | }; | 
|  |  | 
|  | static const struct eurus_cmd_arg_info cmd_info[GELIC_EURUS_CMD_MAX_INDEX] = { | 
|  | [GELIC_EURUS_CMD_SET_COMMON_CFG] = { .pre_arg = 1}, | 
|  | [GELIC_EURUS_CMD_SET_WEP_CFG]    = { .pre_arg = 1}, | 
|  | [GELIC_EURUS_CMD_SET_WPA_CFG]    = { .pre_arg = 1}, | 
|  | [GELIC_EURUS_CMD_GET_COMMON_CFG] = { .post_arg = 1}, | 
|  | [GELIC_EURUS_CMD_GET_WEP_CFG]    = { .post_arg = 1}, | 
|  | [GELIC_EURUS_CMD_GET_WPA_CFG]    = { .post_arg = 1}, | 
|  | [GELIC_EURUS_CMD_GET_RSSI_CFG]   = { .post_arg = 1}, | 
|  | [GELIC_EURUS_CMD_START_SCAN]     = { .pre_arg = 1}, | 
|  | [GELIC_EURUS_CMD_GET_SCAN]       = { .post_arg = 1}, | 
|  | }; | 
|  |  | 
|  | #ifdef DEBUG | 
|  | static const char *cmdstr(enum gelic_eurus_command ix) | 
|  | { | 
|  | switch (ix) { | 
|  | case GELIC_EURUS_CMD_ASSOC: | 
|  | return "ASSOC"; | 
|  | case GELIC_EURUS_CMD_DISASSOC: | 
|  | return "DISASSOC"; | 
|  | case GELIC_EURUS_CMD_START_SCAN: | 
|  | return "SCAN"; | 
|  | case GELIC_EURUS_CMD_GET_SCAN: | 
|  | return "GET SCAN"; | 
|  | case GELIC_EURUS_CMD_SET_COMMON_CFG: | 
|  | return "SET_COMMON_CFG"; | 
|  | case GELIC_EURUS_CMD_GET_COMMON_CFG: | 
|  | return "GET_COMMON_CFG"; | 
|  | case GELIC_EURUS_CMD_SET_WEP_CFG: | 
|  | return "SET_WEP_CFG"; | 
|  | case GELIC_EURUS_CMD_GET_WEP_CFG: | 
|  | return "GET_WEP_CFG"; | 
|  | case GELIC_EURUS_CMD_SET_WPA_CFG: | 
|  | return "SET_WPA_CFG"; | 
|  | case GELIC_EURUS_CMD_GET_WPA_CFG: | 
|  | return "GET_WPA_CFG"; | 
|  | case GELIC_EURUS_CMD_GET_RSSI_CFG: | 
|  | return "GET_RSSI"; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | return ""; | 
|  | }; | 
|  | #else | 
|  | static inline const char *cmdstr(enum gelic_eurus_command ix) | 
|  | { | 
|  | return ""; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* synchronously do eurus commands */ | 
|  | static void gelic_eurus_sync_cmd_worker(struct work_struct *work) | 
|  | { | 
|  | struct gelic_eurus_cmd *cmd; | 
|  | struct gelic_card *card; | 
|  | struct gelic_wl_info *wl; | 
|  |  | 
|  | u64 arg1, arg2; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  | cmd = container_of(work, struct gelic_eurus_cmd, work); | 
|  | BUG_ON(cmd_info[cmd->cmd].pre_arg && | 
|  | cmd_info[cmd->cmd].post_arg); | 
|  | wl = cmd->wl; | 
|  | card = port_to_card(wl_port(wl)); | 
|  |  | 
|  | if (cmd_info[cmd->cmd].pre_arg) { | 
|  | arg1 = (cmd->buffer) ? | 
|  | ps3_mm_phys_to_lpar(__pa(cmd->buffer)) : | 
|  | 0; | 
|  | arg2 = cmd->buf_size; | 
|  | } else { | 
|  | arg1 = 0; | 
|  | arg2 = 0; | 
|  | } | 
|  | init_completion(&wl->cmd_done_intr); | 
|  | pr_debug("%s: cmd='%s' start\n", __func__, cmdstr(cmd->cmd)); | 
|  | cmd->status = lv1_net_control(bus_id(card), dev_id(card), | 
|  | GELIC_LV1_POST_WLAN_CMD, | 
|  | cmd->cmd, arg1, arg2, | 
|  | &cmd->tag, &cmd->size); | 
|  | if (cmd->status) { | 
|  | complete(&cmd->done); | 
|  | pr_info("%s: cmd issue failed\n", __func__); | 
|  | return; | 
|  | } | 
|  |  | 
|  | wait_for_completion(&wl->cmd_done_intr); | 
|  |  | 
|  | if (cmd_info[cmd->cmd].post_arg) { | 
|  | arg1 = ps3_mm_phys_to_lpar(__pa(cmd->buffer)); | 
|  | arg2 = cmd->buf_size; | 
|  | } else { | 
|  | arg1 = 0; | 
|  | arg2 = 0; | 
|  | } | 
|  |  | 
|  | cmd->status = lv1_net_control(bus_id(card), dev_id(card), | 
|  | GELIC_LV1_GET_WLAN_CMD_RESULT, | 
|  | cmd->tag, arg1, arg2, | 
|  | &cmd->cmd_status, &cmd->size); | 
|  | #ifdef DEBUG | 
|  | if (cmd->status || cmd->cmd_status) { | 
|  | pr_debug("%s: cmd done tag=%#lx arg1=%#lx, arg2=%#lx\n", __func__, | 
|  | cmd->tag, arg1, arg2); | 
|  | pr_debug("%s: cmd done status=%#x cmd_status=%#lx size=%#lx\n", | 
|  | __func__, cmd->status, cmd->cmd_status, cmd->size); | 
|  | } | 
|  | #endif | 
|  | complete(&cmd->done); | 
|  | pr_debug("%s: cmd='%s' done\n", __func__, cmdstr(cmd->cmd)); | 
|  | } | 
|  |  | 
|  | static struct gelic_eurus_cmd *gelic_eurus_sync_cmd(struct gelic_wl_info *wl, | 
|  | unsigned int eurus_cmd, | 
|  | void *buffer, | 
|  | unsigned int buf_size) | 
|  | { | 
|  | struct gelic_eurus_cmd *cmd; | 
|  |  | 
|  | /* allocate cmd */ | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) | 
|  | return NULL; | 
|  |  | 
|  | /* initialize members */ | 
|  | cmd->cmd = eurus_cmd; | 
|  | cmd->buffer = buffer; | 
|  | cmd->buf_size = buf_size; | 
|  | cmd->wl = wl; | 
|  | INIT_WORK(&cmd->work, gelic_eurus_sync_cmd_worker); | 
|  | init_completion(&cmd->done); | 
|  | queue_work(wl->eurus_cmd_queue, &cmd->work); | 
|  |  | 
|  | /* wait for command completion */ | 
|  | wait_for_completion(&cmd->done); | 
|  |  | 
|  | return cmd; | 
|  | } | 
|  |  | 
|  | static u32 gelic_wl_get_link(struct net_device *netdev) | 
|  | { | 
|  | struct gelic_wl_info *wl = port_wl(netdev_port(netdev)); | 
|  | u32 ret; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  | mutex_lock(&wl->assoc_stat_lock); | 
|  | if (wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED) | 
|  | ret = 1; | 
|  | else | 
|  | ret = 0; | 
|  | mutex_unlock(&wl->assoc_stat_lock); | 
|  | pr_debug("%s: ->\n", __func__); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void gelic_wl_send_iwap_event(struct gelic_wl_info *wl, u8 *bssid) | 
|  | { | 
|  | union iwreq_data data; | 
|  |  | 
|  | memset(&data, 0, sizeof(data)); | 
|  | if (bssid) | 
|  | memcpy(data.ap_addr.sa_data, bssid, ETH_ALEN); | 
|  | data.ap_addr.sa_family = ARPHRD_ETHER; | 
|  | wireless_send_event(port_to_netdev(wl_port(wl)), SIOCGIWAP, | 
|  | &data, NULL); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * wireless extension handlers and helpers | 
|  | */ | 
|  |  | 
|  | /* SIOGIWNAME */ | 
|  | static int gelic_wl_get_name(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *iwreq, char *extra) | 
|  | { | 
|  | strcpy(iwreq->name, "IEEE 802.11bg"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void gelic_wl_get_ch_info(struct gelic_wl_info *wl) | 
|  | { | 
|  | struct gelic_card *card = port_to_card(wl_port(wl)); | 
|  | u64 ch_info_raw, tmp; | 
|  | int status; | 
|  |  | 
|  | if (!test_and_set_bit(GELIC_WL_STAT_CH_INFO, &wl->stat)) { | 
|  | status = lv1_net_control(bus_id(card), dev_id(card), | 
|  | GELIC_LV1_GET_CHANNEL, 0, 0, 0, | 
|  | &ch_info_raw, | 
|  | &tmp); | 
|  | /* some fw versions may return error */ | 
|  | if (status) { | 
|  | if (status != LV1_NO_ENTRY) | 
|  | pr_info("%s: available ch unknown\n", __func__); | 
|  | wl->ch_info = 0x07ff;/* 11 ch */ | 
|  | } else | 
|  | /* 16 bits of MSB has available channels */ | 
|  | wl->ch_info = ch_info_raw >> 48; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* SIOGIWRANGE */ | 
|  | static int gelic_wl_get_range(struct net_device *netdev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *iwreq, char *extra) | 
|  | { | 
|  | struct iw_point *point = &iwreq->data; | 
|  | struct iw_range *range = (struct iw_range *)extra; | 
|  | struct gelic_wl_info *wl = port_wl(netdev_port(netdev)); | 
|  | unsigned int i, chs; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  | point->length = sizeof(struct iw_range); | 
|  | memset(range, 0, sizeof(struct iw_range)); | 
|  |  | 
|  | range->we_version_compiled = WIRELESS_EXT; | 
|  | range->we_version_source = 22; | 
|  |  | 
|  | /* available channels and frequencies */ | 
|  | gelic_wl_get_ch_info(wl); | 
|  |  | 
|  | for (i = 0, chs = 0; | 
|  | i < NUM_CHANNELS && chs < IW_MAX_FREQUENCIES; i++) | 
|  | if (wl->ch_info & (1 << i)) { | 
|  | range->freq[chs].i = i + 1; | 
|  | range->freq[chs].m = channel_freq[i]; | 
|  | range->freq[chs].e = 6; | 
|  | chs++; | 
|  | } | 
|  | range->num_frequency = chs; | 
|  | range->old_num_frequency = chs; | 
|  | range->num_channels = chs; | 
|  | range->old_num_channels = chs; | 
|  |  | 
|  | /* bitrates */ | 
|  | for (i = 0; i < NUM_BITRATES; i++) | 
|  | range->bitrate[i] = bitrate_list[i]; | 
|  | range->num_bitrates = i; | 
|  |  | 
|  | /* signal levels */ | 
|  | range->max_qual.qual = 100; /* relative value */ | 
|  | range->max_qual.level = 100; | 
|  | range->avg_qual.qual = 50; | 
|  | range->avg_qual.level = 50; | 
|  | range->sensitivity = 0; | 
|  |  | 
|  | /* Event capability */ | 
|  | IW_EVENT_CAPA_SET_KERNEL(range->event_capa); | 
|  | IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP); | 
|  | IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN); | 
|  |  | 
|  | /* encryption capability */ | 
|  | range->enc_capa = IW_ENC_CAPA_WPA | | 
|  | IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP | | 
|  | IW_ENC_CAPA_4WAY_HANDSHAKE; | 
|  | if (wpa2_capable()) | 
|  | range->enc_capa |= IW_ENC_CAPA_WPA2; | 
|  | range->encoding_size[0] = 5;	/* 40bit WEP */ | 
|  | range->encoding_size[1] = 13;	/* 104bit WEP */ | 
|  | range->encoding_size[2] = 32;	/* WPA-PSK */ | 
|  | range->num_encoding_sizes = 3; | 
|  | range->max_encoding_tokens = GELIC_WEP_KEYS; | 
|  |  | 
|  | /* scan capability */ | 
|  | range->scan_capa = IW_SCAN_CAPA_ESSID; | 
|  |  | 
|  | pr_debug("%s: ->\n", __func__); | 
|  | return 0; | 
|  |  | 
|  | } | 
|  |  | 
|  | /* SIOC{G,S}IWSCAN */ | 
|  | static int gelic_wl_set_scan(struct net_device *netdev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); | 
|  | struct iw_scan_req *req; | 
|  | u8 *essid = NULL; | 
|  | size_t essid_len = 0; | 
|  |  | 
|  | if (wrqu->data.length == sizeof(struct iw_scan_req) && | 
|  | wrqu->data.flags & IW_SCAN_THIS_ESSID) { | 
|  | req = (struct iw_scan_req*)extra; | 
|  | essid = req->essid; | 
|  | essid_len = req->essid_len; | 
|  | pr_debug("%s: ESSID scan =%s\n", __func__, essid); | 
|  | } | 
|  | return gelic_wl_start_scan(wl, 1, essid, essid_len); | 
|  | } | 
|  |  | 
|  | #define OUI_LEN 3 | 
|  | static const u8 rsn_oui[OUI_LEN] = { 0x00, 0x0f, 0xac }; | 
|  | static const u8 wpa_oui[OUI_LEN] = { 0x00, 0x50, 0xf2 }; | 
|  |  | 
|  | /* | 
|  | * synthesize WPA/RSN IE data | 
|  | * See WiFi WPA specification and IEEE 802.11-2007 7.3.2.25 | 
|  | * for the format | 
|  | */ | 
|  | static size_t gelic_wl_synthesize_ie(u8 *buf, | 
|  | struct gelic_eurus_scan_info *scan) | 
|  | { | 
|  |  | 
|  | const u8 *oui_header; | 
|  | u8 *start = buf; | 
|  | int rsn; | 
|  | int ccmp; | 
|  |  | 
|  | pr_debug("%s: <- sec=%16x\n", __func__, scan->security); | 
|  | switch (be16_to_cpu(scan->security) & GELIC_EURUS_SCAN_SEC_MASK) { | 
|  | case GELIC_EURUS_SCAN_SEC_WPA: | 
|  | rsn = 0; | 
|  | break; | 
|  | case GELIC_EURUS_SCAN_SEC_WPA2: | 
|  | rsn = 1; | 
|  | break; | 
|  | default: | 
|  | /* WEP or none.  No IE returned */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | switch (be16_to_cpu(scan->security) & GELIC_EURUS_SCAN_SEC_WPA_MASK) { | 
|  | case GELIC_EURUS_SCAN_SEC_WPA_TKIP: | 
|  | ccmp = 0; | 
|  | break; | 
|  | case GELIC_EURUS_SCAN_SEC_WPA_AES: | 
|  | ccmp = 1; | 
|  | break; | 
|  | default: | 
|  | if (rsn) { | 
|  | ccmp = 1; | 
|  | pr_info("%s: no cipher info. defaulted to CCMP\n", | 
|  | __func__); | 
|  | } else { | 
|  | ccmp = 0; | 
|  | pr_info("%s: no cipher info. defaulted to TKIP\n", | 
|  | __func__); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (rsn) | 
|  | oui_header = rsn_oui; | 
|  | else | 
|  | oui_header = wpa_oui; | 
|  |  | 
|  | /* element id */ | 
|  | if (rsn) | 
|  | *buf++ = WLAN_EID_RSN; | 
|  | else | 
|  | *buf++ = WLAN_EID_GENERIC; | 
|  |  | 
|  | /* length filed; set later */ | 
|  | buf++; | 
|  |  | 
|  | /* wpa special header */ | 
|  | if (!rsn) { | 
|  | memcpy(buf, wpa_oui, OUI_LEN); | 
|  | buf += OUI_LEN; | 
|  | *buf++ = 0x01; | 
|  | } | 
|  |  | 
|  | /* version */ | 
|  | *buf++ = 0x01; /* version 1.0 */ | 
|  | *buf++ = 0x00; | 
|  |  | 
|  | /* group cipher */ | 
|  | memcpy(buf, oui_header, OUI_LEN); | 
|  | buf += OUI_LEN; | 
|  |  | 
|  | if (ccmp) | 
|  | *buf++ = 0x04; /* CCMP */ | 
|  | else | 
|  | *buf++ = 0x02; /* TKIP */ | 
|  |  | 
|  | /* pairwise key count always 1 */ | 
|  | *buf++ = 0x01; | 
|  | *buf++ = 0x00; | 
|  |  | 
|  | /* pairwise key suit */ | 
|  | memcpy(buf, oui_header, OUI_LEN); | 
|  | buf += OUI_LEN; | 
|  | if (ccmp) | 
|  | *buf++ = 0x04; /* CCMP */ | 
|  | else | 
|  | *buf++ = 0x02; /* TKIP */ | 
|  |  | 
|  | /* AKM count is 1 */ | 
|  | *buf++ = 0x01; | 
|  | *buf++ = 0x00; | 
|  |  | 
|  | /* AKM suite is assumed as PSK*/ | 
|  | memcpy(buf, oui_header, OUI_LEN); | 
|  | buf += OUI_LEN; | 
|  | *buf++ = 0x02; /* PSK */ | 
|  |  | 
|  | /* RSN capabilities is 0 */ | 
|  | *buf++ = 0x00; | 
|  | *buf++ = 0x00; | 
|  |  | 
|  | /* set length field */ | 
|  | start[1] = (buf - start - 2); | 
|  |  | 
|  | pr_debug("%s: ->\n", __func__); | 
|  | return buf - start; | 
|  | } | 
|  |  | 
|  | struct ie_item { | 
|  | u8 *data; | 
|  | u8 len; | 
|  | }; | 
|  |  | 
|  | struct ie_info { | 
|  | struct ie_item wpa; | 
|  | struct ie_item rsn; | 
|  | }; | 
|  |  | 
|  | static void gelic_wl_parse_ie(u8 *data, size_t len, | 
|  | struct ie_info *ie_info) | 
|  | { | 
|  | size_t data_left = len; | 
|  | u8 *pos = data; | 
|  | u8 item_len; | 
|  | u8 item_id; | 
|  |  | 
|  | pr_debug("%s: data=%p len=%ld\n", __func__, | 
|  | data, len); | 
|  | memset(ie_info, 0, sizeof(struct ie_info)); | 
|  |  | 
|  | while (2 <= data_left) { | 
|  | item_id = *pos++; | 
|  | item_len = *pos++; | 
|  | data_left -= 2; | 
|  |  | 
|  | if (data_left < item_len) | 
|  | break; | 
|  |  | 
|  | switch (item_id) { | 
|  | case WLAN_EID_GENERIC: | 
|  | if ((OUI_LEN + 1 <= item_len) && | 
|  | !memcmp(pos, wpa_oui, OUI_LEN) && | 
|  | pos[OUI_LEN] == 0x01) { | 
|  | ie_info->wpa.data = pos - 2; | 
|  | ie_info->wpa.len = item_len + 2; | 
|  | } | 
|  | break; | 
|  | case WLAN_EID_RSN: | 
|  | ie_info->rsn.data = pos - 2; | 
|  | /* length includes the header */ | 
|  | ie_info->rsn.len = item_len + 2; | 
|  | break; | 
|  | default: | 
|  | pr_debug("%s: ignore %#x,%d\n", __func__, | 
|  | item_id, item_len); | 
|  | break; | 
|  | } | 
|  | pos += item_len; | 
|  | data_left -= item_len; | 
|  | } | 
|  | pr_debug("%s: wpa=%p,%d wpa2=%p,%d\n", __func__, | 
|  | ie_info->wpa.data, ie_info->wpa.len, | 
|  | ie_info->rsn.data, ie_info->rsn.len); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * translate the scan informations from hypervisor to a | 
|  | * independent format | 
|  | */ | 
|  | static char *gelic_wl_translate_scan(struct net_device *netdev, | 
|  | struct iw_request_info *info, | 
|  | char *ev, | 
|  | char *stop, | 
|  | struct gelic_wl_scan_info *network) | 
|  | { | 
|  | struct iw_event iwe; | 
|  | struct gelic_eurus_scan_info *scan = network->hwinfo; | 
|  | char *tmp; | 
|  | u8 rate; | 
|  | unsigned int i, j, len; | 
|  | u8 buf[64]; /* arbitrary size large enough */ | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  |  | 
|  | /* first entry should be AP's mac address */ | 
|  | iwe.cmd = SIOCGIWAP; | 
|  | iwe.u.ap_addr.sa_family = ARPHRD_ETHER; | 
|  | memcpy(iwe.u.ap_addr.sa_data, &scan->bssid[2], ETH_ALEN); | 
|  | ev = iwe_stream_add_event(info, ev, stop, &iwe, IW_EV_ADDR_LEN); | 
|  |  | 
|  | /* ESSID */ | 
|  | iwe.cmd = SIOCGIWESSID; | 
|  | iwe.u.data.flags = 1; | 
|  | iwe.u.data.length = strnlen(scan->essid, 32); | 
|  | ev = iwe_stream_add_point(info, ev, stop, &iwe, scan->essid); | 
|  |  | 
|  | /* FREQUENCY */ | 
|  | iwe.cmd = SIOCGIWFREQ; | 
|  | iwe.u.freq.m = be16_to_cpu(scan->channel); | 
|  | iwe.u.freq.e = 0; /* table value in MHz */ | 
|  | iwe.u.freq.i = 0; | 
|  | ev = iwe_stream_add_event(info, ev, stop, &iwe, IW_EV_FREQ_LEN); | 
|  |  | 
|  | /* RATES */ | 
|  | iwe.cmd = SIOCGIWRATE; | 
|  | iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; | 
|  | /* to stuff multiple values in one event */ | 
|  | tmp = ev + iwe_stream_lcp_len(info); | 
|  | /* put them in ascendant order (older is first) */ | 
|  | i = 0; | 
|  | j = 0; | 
|  | pr_debug("%s: rates=%d rate=%d\n", __func__, | 
|  | network->rate_len, network->rate_ext_len); | 
|  | while (i < network->rate_len) { | 
|  | if (j < network->rate_ext_len && | 
|  | ((scan->ext_rate[j] & 0x7f) < (scan->rate[i] & 0x7f))) | 
|  | rate = scan->ext_rate[j++] & 0x7f; | 
|  | else | 
|  | rate = scan->rate[i++] & 0x7f; | 
|  | iwe.u.bitrate.value = rate * 500000; /* 500kbps unit */ | 
|  | tmp = iwe_stream_add_value(info, ev, tmp, stop, &iwe, | 
|  | IW_EV_PARAM_LEN); | 
|  | } | 
|  | while (j < network->rate_ext_len) { | 
|  | iwe.u.bitrate.value = (scan->ext_rate[j++] & 0x7f) * 500000; | 
|  | tmp = iwe_stream_add_value(info, ev, tmp, stop, &iwe, | 
|  | IW_EV_PARAM_LEN); | 
|  | } | 
|  | /* Check if we added any rate */ | 
|  | if (iwe_stream_lcp_len(info) < (tmp - ev)) | 
|  | ev = tmp; | 
|  |  | 
|  | /* ENCODE */ | 
|  | iwe.cmd = SIOCGIWENCODE; | 
|  | if (be16_to_cpu(scan->capability) & WLAN_CAPABILITY_PRIVACY) | 
|  | iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; | 
|  | else | 
|  | iwe.u.data.flags = IW_ENCODE_DISABLED; | 
|  | iwe.u.data.length = 0; | 
|  | ev = iwe_stream_add_point(info, ev, stop, &iwe, scan->essid); | 
|  |  | 
|  | /* MODE */ | 
|  | iwe.cmd = SIOCGIWMODE; | 
|  | if (be16_to_cpu(scan->capability) & | 
|  | (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) { | 
|  | if (be16_to_cpu(scan->capability) & WLAN_CAPABILITY_ESS) | 
|  | iwe.u.mode = IW_MODE_MASTER; | 
|  | else | 
|  | iwe.u.mode = IW_MODE_ADHOC; | 
|  | ev = iwe_stream_add_event(info, ev, stop, &iwe, IW_EV_UINT_LEN); | 
|  | } | 
|  |  | 
|  | /* QUAL */ | 
|  | iwe.cmd = IWEVQUAL; | 
|  | iwe.u.qual.updated  = IW_QUAL_ALL_UPDATED | | 
|  | IW_QUAL_QUAL_INVALID | IW_QUAL_NOISE_INVALID; | 
|  | iwe.u.qual.level = be16_to_cpu(scan->rssi); | 
|  | iwe.u.qual.qual = be16_to_cpu(scan->rssi); | 
|  | iwe.u.qual.noise = 0; | 
|  | ev  = iwe_stream_add_event(info, ev, stop, &iwe, IW_EV_QUAL_LEN); | 
|  |  | 
|  | /* RSN */ | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | if (be16_to_cpu(scan->size) <= sizeof(*scan)) { | 
|  | /* If wpa[2] capable station, synthesize IE and put it */ | 
|  | len = gelic_wl_synthesize_ie(buf, scan); | 
|  | if (len) { | 
|  | iwe.cmd = IWEVGENIE; | 
|  | iwe.u.data.length = len; | 
|  | ev = iwe_stream_add_point(info, ev, stop, &iwe, buf); | 
|  | } | 
|  | } else { | 
|  | /* this scan info has IE data */ | 
|  | struct ie_info ie_info; | 
|  | size_t data_len; | 
|  |  | 
|  | data_len = be16_to_cpu(scan->size) - sizeof(*scan); | 
|  |  | 
|  | gelic_wl_parse_ie(scan->elements, data_len, &ie_info); | 
|  |  | 
|  | if (ie_info.wpa.len && (ie_info.wpa.len <= sizeof(buf))) { | 
|  | memcpy(buf, ie_info.wpa.data, ie_info.wpa.len); | 
|  | iwe.cmd = IWEVGENIE; | 
|  | iwe.u.data.length = ie_info.wpa.len; | 
|  | ev = iwe_stream_add_point(info, ev, stop, &iwe, buf); | 
|  | } | 
|  |  | 
|  | if (ie_info.rsn.len && (ie_info.rsn.len <= sizeof(buf))) { | 
|  | memset(&iwe, 0, sizeof(iwe)); | 
|  | memcpy(buf, ie_info.rsn.data, ie_info.rsn.len); | 
|  | iwe.cmd = IWEVGENIE; | 
|  | iwe.u.data.length = ie_info.rsn.len; | 
|  | ev = iwe_stream_add_point(info, ev, stop, &iwe, buf); | 
|  | } | 
|  | } | 
|  |  | 
|  | pr_debug("%s: ->\n", __func__); | 
|  | return ev; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int gelic_wl_get_scan(struct net_device *netdev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); | 
|  | struct gelic_wl_scan_info *scan_info; | 
|  | char *ev = extra; | 
|  | char *stop = ev + wrqu->data.length; | 
|  | int ret = 0; | 
|  | unsigned long this_time = jiffies; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  | if (mutex_lock_interruptible(&wl->scan_lock)) | 
|  | return -EAGAIN; | 
|  |  | 
|  | switch (wl->scan_stat) { | 
|  | case GELIC_WL_SCAN_STAT_SCANNING: | 
|  | /* If a scan in progress, caller should call me again */ | 
|  | ret = -EAGAIN; | 
|  | goto out; | 
|  | break; | 
|  |  | 
|  | case GELIC_WL_SCAN_STAT_INIT: | 
|  | /* last scan request failed or never issued */ | 
|  | ret = -ENODEV; | 
|  | goto out; | 
|  | break; | 
|  | case GELIC_WL_SCAN_STAT_GOT_LIST: | 
|  | /* ok, use current list */ | 
|  | break; | 
|  | } | 
|  |  | 
|  | list_for_each_entry(scan_info, &wl->network_list, list) { | 
|  | if (wl->scan_age == 0 || | 
|  | time_after(scan_info->last_scanned + wl->scan_age, | 
|  | this_time)) | 
|  | ev = gelic_wl_translate_scan(netdev, info, | 
|  | ev, stop, | 
|  | scan_info); | 
|  | else | 
|  | pr_debug("%s:entry too old\n", __func__); | 
|  |  | 
|  | if (stop - ev <= IW_EV_ADDR_LEN) { | 
|  | ret = -E2BIG; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | wrqu->data.length = ev - extra; | 
|  | wrqu->data.flags = 0; | 
|  | out: | 
|  | mutex_unlock(&wl->scan_lock); | 
|  | pr_debug("%s: -> %d %d\n", __func__, ret, wrqu->data.length); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #ifdef DEBUG | 
|  | static void scan_list_dump(struct gelic_wl_info *wl) | 
|  | { | 
|  | struct gelic_wl_scan_info *scan_info; | 
|  | int i; | 
|  |  | 
|  | i = 0; | 
|  | list_for_each_entry(scan_info, &wl->network_list, list) { | 
|  | pr_debug("%s: item %d\n", __func__, i++); | 
|  | pr_debug("valid=%d eurusindex=%d last=%lx\n", | 
|  | scan_info->valid, scan_info->eurus_index, | 
|  | scan_info->last_scanned); | 
|  | pr_debug("r_len=%d r_ext_len=%d essid_len=%d\n", | 
|  | scan_info->rate_len, scan_info->rate_ext_len, | 
|  | scan_info->essid_len); | 
|  | /* -- */ | 
|  | pr_debug("bssid=%pM\n", &scan_info->hwinfo->bssid[2]); | 
|  | pr_debug("essid=%s\n", scan_info->hwinfo->essid); | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int gelic_wl_set_auth(struct net_device *netdev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *data, char *extra) | 
|  | { | 
|  | struct iw_param *param = &data->param; | 
|  | struct gelic_wl_info *wl = port_wl(netdev_port(netdev)); | 
|  | unsigned long irqflag; | 
|  | int ret = 0; | 
|  |  | 
|  | pr_debug("%s: <- %d\n", __func__, param->flags & IW_AUTH_INDEX); | 
|  | spin_lock_irqsave(&wl->lock, irqflag); | 
|  | switch (param->flags & IW_AUTH_INDEX) { | 
|  | case IW_AUTH_WPA_VERSION: | 
|  | if (param->value & IW_AUTH_WPA_VERSION_DISABLED) { | 
|  | pr_debug("%s: NO WPA selected\n", __func__); | 
|  | wl->wpa_level = GELIC_WL_WPA_LEVEL_NONE; | 
|  | wl->group_cipher_method = GELIC_WL_CIPHER_WEP; | 
|  | wl->pairwise_cipher_method = GELIC_WL_CIPHER_WEP; | 
|  | } | 
|  | if (param->value & IW_AUTH_WPA_VERSION_WPA) { | 
|  | pr_debug("%s: WPA version 1 selected\n", __func__); | 
|  | wl->wpa_level = GELIC_WL_WPA_LEVEL_WPA; | 
|  | wl->group_cipher_method = GELIC_WL_CIPHER_TKIP; | 
|  | wl->pairwise_cipher_method = GELIC_WL_CIPHER_TKIP; | 
|  | wl->auth_method = GELIC_EURUS_AUTH_OPEN; | 
|  | } | 
|  | if (param->value & IW_AUTH_WPA_VERSION_WPA2) { | 
|  | /* | 
|  | * As the hypervisor may not tell the cipher | 
|  | * information of the AP if it is WPA2, | 
|  | * you will not decide suitable cipher from | 
|  | * its beacon. | 
|  | * You should have knowledge about the AP's | 
|  | * cipher infomation in other method prior to | 
|  | * the association. | 
|  | */ | 
|  | if (!precise_ie()) | 
|  | pr_info("%s: WPA2 may not work\n", __func__); | 
|  | if (wpa2_capable()) { | 
|  | wl->wpa_level = GELIC_WL_WPA_LEVEL_WPA2; | 
|  | wl->group_cipher_method = GELIC_WL_CIPHER_AES; | 
|  | wl->pairwise_cipher_method = | 
|  | GELIC_WL_CIPHER_AES; | 
|  | wl->auth_method = GELIC_EURUS_AUTH_OPEN; | 
|  | } else | 
|  | ret = -EINVAL; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case IW_AUTH_CIPHER_PAIRWISE: | 
|  | if (param->value & | 
|  | (IW_AUTH_CIPHER_WEP104 | IW_AUTH_CIPHER_WEP40)) { | 
|  | pr_debug("%s: WEP selected\n", __func__); | 
|  | wl->pairwise_cipher_method = GELIC_WL_CIPHER_WEP; | 
|  | } | 
|  | if (param->value & IW_AUTH_CIPHER_TKIP) { | 
|  | pr_debug("%s: TKIP selected\n", __func__); | 
|  | wl->pairwise_cipher_method = GELIC_WL_CIPHER_TKIP; | 
|  | } | 
|  | if (param->value & IW_AUTH_CIPHER_CCMP) { | 
|  | pr_debug("%s: CCMP selected\n", __func__); | 
|  | wl->pairwise_cipher_method = GELIC_WL_CIPHER_AES; | 
|  | } | 
|  | if (param->value & IW_AUTH_CIPHER_NONE) { | 
|  | pr_debug("%s: no auth selected\n", __func__); | 
|  | wl->pairwise_cipher_method = GELIC_WL_CIPHER_NONE; | 
|  | } | 
|  | break; | 
|  | case IW_AUTH_CIPHER_GROUP: | 
|  | if (param->value & | 
|  | (IW_AUTH_CIPHER_WEP104 | IW_AUTH_CIPHER_WEP40)) { | 
|  | pr_debug("%s: WEP selected\n", __func__); | 
|  | wl->group_cipher_method = GELIC_WL_CIPHER_WEP; | 
|  | } | 
|  | if (param->value & IW_AUTH_CIPHER_TKIP) { | 
|  | pr_debug("%s: TKIP selected\n", __func__); | 
|  | wl->group_cipher_method = GELIC_WL_CIPHER_TKIP; | 
|  | } | 
|  | if (param->value & IW_AUTH_CIPHER_CCMP) { | 
|  | pr_debug("%s: CCMP selected\n", __func__); | 
|  | wl->group_cipher_method = GELIC_WL_CIPHER_AES; | 
|  | } | 
|  | if (param->value & IW_AUTH_CIPHER_NONE) { | 
|  | pr_debug("%s: no auth selected\n", __func__); | 
|  | wl->group_cipher_method = GELIC_WL_CIPHER_NONE; | 
|  | } | 
|  | break; | 
|  | case IW_AUTH_80211_AUTH_ALG: | 
|  | if (param->value & IW_AUTH_ALG_SHARED_KEY) { | 
|  | pr_debug("%s: shared key specified\n", __func__); | 
|  | wl->auth_method = GELIC_EURUS_AUTH_SHARED; | 
|  | } else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) { | 
|  | pr_debug("%s: open system specified\n", __func__); | 
|  | wl->auth_method = GELIC_EURUS_AUTH_OPEN; | 
|  | } else | 
|  | ret = -EINVAL; | 
|  | break; | 
|  |  | 
|  | case IW_AUTH_WPA_ENABLED: | 
|  | if (param->value) { | 
|  | pr_debug("%s: WPA enabled\n", __func__); | 
|  | wl->wpa_level = GELIC_WL_WPA_LEVEL_WPA; | 
|  | } else { | 
|  | pr_debug("%s: WPA disabled\n", __func__); | 
|  | wl->wpa_level = GELIC_WL_WPA_LEVEL_NONE; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case IW_AUTH_KEY_MGMT: | 
|  | if (param->value & IW_AUTH_KEY_MGMT_PSK) | 
|  | break; | 
|  | /* intentionally fall through */ | 
|  | default: | 
|  | ret = -EOPNOTSUPP; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!ret) | 
|  | set_bit(GELIC_WL_STAT_CONFIGURED, &wl->stat); | 
|  |  | 
|  | spin_unlock_irqrestore(&wl->lock, irqflag); | 
|  | pr_debug("%s: -> %d\n", __func__, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int gelic_wl_get_auth(struct net_device *netdev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *iwreq, char *extra) | 
|  | { | 
|  | struct iw_param *param = &iwreq->param; | 
|  | struct gelic_wl_info *wl = port_wl(netdev_port(netdev)); | 
|  | unsigned long irqflag; | 
|  | int ret = 0; | 
|  |  | 
|  | pr_debug("%s: <- %d\n", __func__, param->flags & IW_AUTH_INDEX); | 
|  | spin_lock_irqsave(&wl->lock, irqflag); | 
|  | switch (param->flags & IW_AUTH_INDEX) { | 
|  | case IW_AUTH_WPA_VERSION: | 
|  | switch (wl->wpa_level) { | 
|  | case GELIC_WL_WPA_LEVEL_WPA: | 
|  | param->value |= IW_AUTH_WPA_VERSION_WPA; | 
|  | break; | 
|  | case GELIC_WL_WPA_LEVEL_WPA2: | 
|  | param->value |= IW_AUTH_WPA_VERSION_WPA2; | 
|  | break; | 
|  | default: | 
|  | param->value |= IW_AUTH_WPA_VERSION_DISABLED; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case IW_AUTH_80211_AUTH_ALG: | 
|  | if (wl->auth_method == GELIC_EURUS_AUTH_SHARED) | 
|  | param->value = IW_AUTH_ALG_SHARED_KEY; | 
|  | else if (wl->auth_method == GELIC_EURUS_AUTH_OPEN) | 
|  | param->value = IW_AUTH_ALG_OPEN_SYSTEM; | 
|  | break; | 
|  |  | 
|  | case IW_AUTH_WPA_ENABLED: | 
|  | switch (wl->wpa_level) { | 
|  | case GELIC_WL_WPA_LEVEL_WPA: | 
|  | case GELIC_WL_WPA_LEVEL_WPA2: | 
|  | param->value = 1; | 
|  | break; | 
|  | default: | 
|  | param->value = 0; | 
|  | break; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | ret = -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&wl->lock, irqflag); | 
|  | pr_debug("%s: -> %d\n", __func__, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* SIOC{S,G}IWESSID */ | 
|  | static int gelic_wl_set_essid(struct net_device *netdev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *data, char *extra) | 
|  | { | 
|  | struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); | 
|  | unsigned long irqflag; | 
|  |  | 
|  | pr_debug("%s: <- l=%d f=%d\n", __func__, | 
|  | data->essid.length, data->essid.flags); | 
|  | if (IW_ESSID_MAX_SIZE < data->essid.length) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(&wl->lock, irqflag); | 
|  | if (data->essid.flags) { | 
|  | wl->essid_len = data->essid.length; | 
|  | memcpy(wl->essid, extra, wl->essid_len); | 
|  | pr_debug("%s: essid = '%s'\n", __func__, extra); | 
|  | set_bit(GELIC_WL_STAT_ESSID_SET, &wl->stat); | 
|  | } else { | 
|  | pr_debug("%s: ESSID any\n", __func__); | 
|  | clear_bit(GELIC_WL_STAT_ESSID_SET, &wl->stat); | 
|  | } | 
|  | set_bit(GELIC_WL_STAT_CONFIGURED, &wl->stat); | 
|  | spin_unlock_irqrestore(&wl->lock, irqflag); | 
|  |  | 
|  |  | 
|  | gelic_wl_try_associate(netdev); /* FIXME */ | 
|  | pr_debug("%s: ->\n", __func__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int gelic_wl_get_essid(struct net_device *netdev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *data, char *extra) | 
|  | { | 
|  | struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); | 
|  | unsigned long irqflag; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  | mutex_lock(&wl->assoc_stat_lock); | 
|  | spin_lock_irqsave(&wl->lock, irqflag); | 
|  | if (test_bit(GELIC_WL_STAT_ESSID_SET, &wl->stat) || | 
|  | wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED) { | 
|  | memcpy(extra, wl->essid, wl->essid_len); | 
|  | data->essid.length = wl->essid_len; | 
|  | data->essid.flags = 1; | 
|  | } else | 
|  | data->essid.flags = 0; | 
|  |  | 
|  | mutex_unlock(&wl->assoc_stat_lock); | 
|  | spin_unlock_irqrestore(&wl->lock, irqflag); | 
|  | pr_debug("%s: -> len=%d\n", __func__, data->essid.length); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* SIO{S,G}IWENCODE */ | 
|  | static int gelic_wl_set_encode(struct net_device *netdev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *data, char *extra) | 
|  | { | 
|  | struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); | 
|  | struct iw_point *enc = &data->encoding; | 
|  | __u16 flags; | 
|  | unsigned long irqflag; | 
|  | int key_index, index_specified; | 
|  | int ret = 0; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  | flags = enc->flags & IW_ENCODE_FLAGS; | 
|  | key_index = enc->flags & IW_ENCODE_INDEX; | 
|  |  | 
|  | pr_debug("%s: key_index = %d\n", __func__, key_index); | 
|  | pr_debug("%s: key_len = %d\n", __func__, enc->length); | 
|  | pr_debug("%s: flag=%x\n", __func__, enc->flags & IW_ENCODE_FLAGS); | 
|  |  | 
|  | if (GELIC_WEP_KEYS < key_index) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(&wl->lock, irqflag); | 
|  | if (key_index) { | 
|  | index_specified = 1; | 
|  | key_index--; | 
|  | } else { | 
|  | index_specified = 0; | 
|  | key_index = wl->current_key; | 
|  | } | 
|  |  | 
|  | if (flags & IW_ENCODE_NOKEY) { | 
|  | /* if just IW_ENCODE_NOKEY, change current key index */ | 
|  | if (!flags && index_specified) { | 
|  | wl->current_key = key_index; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (flags & IW_ENCODE_DISABLED) { | 
|  | if (!index_specified) { | 
|  | /* disable encryption */ | 
|  | wl->group_cipher_method = GELIC_WL_CIPHER_NONE; | 
|  | wl->pairwise_cipher_method = | 
|  | GELIC_WL_CIPHER_NONE; | 
|  | /* invalidate all key */ | 
|  | wl->key_enabled = 0; | 
|  | } else | 
|  | clear_bit(key_index, &wl->key_enabled); | 
|  | } | 
|  |  | 
|  | if (flags & IW_ENCODE_OPEN) | 
|  | wl->auth_method = GELIC_EURUS_AUTH_OPEN; | 
|  | if (flags & IW_ENCODE_RESTRICTED) { | 
|  | pr_info("%s: shared key mode enabled\n", __func__); | 
|  | wl->auth_method = GELIC_EURUS_AUTH_SHARED; | 
|  | } | 
|  | } else { | 
|  | if (IW_ENCODING_TOKEN_MAX < enc->length) { | 
|  | ret = -EINVAL; | 
|  | goto done; | 
|  | } | 
|  | wl->key_len[key_index] = enc->length; | 
|  | memcpy(wl->key[key_index], extra, enc->length); | 
|  | set_bit(key_index, &wl->key_enabled); | 
|  | wl->pairwise_cipher_method = GELIC_WL_CIPHER_WEP; | 
|  | wl->group_cipher_method = GELIC_WL_CIPHER_WEP; | 
|  | } | 
|  | set_bit(GELIC_WL_STAT_CONFIGURED, &wl->stat); | 
|  | done: | 
|  | spin_unlock_irqrestore(&wl->lock, irqflag); | 
|  | pr_debug("%s: ->\n", __func__); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int gelic_wl_get_encode(struct net_device *netdev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *data, char *extra) | 
|  | { | 
|  | struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); | 
|  | struct iw_point *enc = &data->encoding; | 
|  | unsigned long irqflag; | 
|  | unsigned int key_index, index_specified; | 
|  | int ret = 0; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  | key_index = enc->flags & IW_ENCODE_INDEX; | 
|  | pr_debug("%s: flag=%#x point=%p len=%d extra=%p\n", __func__, | 
|  | enc->flags, enc->pointer, enc->length, extra); | 
|  | if (GELIC_WEP_KEYS < key_index) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(&wl->lock, irqflag); | 
|  | if (key_index) { | 
|  | index_specified = 1; | 
|  | key_index--; | 
|  | } else { | 
|  | index_specified = 0; | 
|  | key_index = wl->current_key; | 
|  | } | 
|  |  | 
|  | if (wl->group_cipher_method == GELIC_WL_CIPHER_WEP) { | 
|  | switch (wl->auth_method) { | 
|  | case GELIC_EURUS_AUTH_OPEN: | 
|  | enc->flags = IW_ENCODE_OPEN; | 
|  | break; | 
|  | case GELIC_EURUS_AUTH_SHARED: | 
|  | enc->flags = IW_ENCODE_RESTRICTED; | 
|  | break; | 
|  | } | 
|  | } else | 
|  | enc->flags = IW_ENCODE_DISABLED; | 
|  |  | 
|  | if (test_bit(key_index, &wl->key_enabled)) { | 
|  | if (enc->length < wl->key_len[key_index]) { | 
|  | ret = -EINVAL; | 
|  | goto done; | 
|  | } | 
|  | enc->length = wl->key_len[key_index]; | 
|  | memcpy(extra, wl->key[key_index], wl->key_len[key_index]); | 
|  | } else { | 
|  | enc->length = 0; | 
|  | enc->flags |= IW_ENCODE_NOKEY; | 
|  | } | 
|  | enc->flags |= key_index + 1; | 
|  | pr_debug("%s: -> flag=%x len=%d\n", __func__, | 
|  | enc->flags, enc->length); | 
|  |  | 
|  | done: | 
|  | spin_unlock_irqrestore(&wl->lock, irqflag); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* SIOC{S,G}IWAP */ | 
|  | static int gelic_wl_set_ap(struct net_device *netdev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *data, char *extra) | 
|  | { | 
|  | struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); | 
|  | unsigned long irqflag; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  | if (data->ap_addr.sa_family != ARPHRD_ETHER) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(&wl->lock, irqflag); | 
|  | if (is_valid_ether_addr(data->ap_addr.sa_data)) { | 
|  | memcpy(wl->bssid, data->ap_addr.sa_data, | 
|  | ETH_ALEN); | 
|  | set_bit(GELIC_WL_STAT_BSSID_SET, &wl->stat); | 
|  | set_bit(GELIC_WL_STAT_CONFIGURED, &wl->stat); | 
|  | pr_debug("%s: bss=%pM\n", __func__, wl->bssid); | 
|  | } else { | 
|  | pr_debug("%s: clear bssid\n", __func__); | 
|  | clear_bit(GELIC_WL_STAT_BSSID_SET, &wl->stat); | 
|  | memset(wl->bssid, 0, ETH_ALEN); | 
|  | } | 
|  | spin_unlock_irqrestore(&wl->lock, irqflag); | 
|  | pr_debug("%s: ->\n", __func__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int gelic_wl_get_ap(struct net_device *netdev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *data, char *extra) | 
|  | { | 
|  | struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); | 
|  | unsigned long irqflag; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  | mutex_lock(&wl->assoc_stat_lock); | 
|  | spin_lock_irqsave(&wl->lock, irqflag); | 
|  | if (wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED) { | 
|  | data->ap_addr.sa_family = ARPHRD_ETHER; | 
|  | memcpy(data->ap_addr.sa_data, wl->active_bssid, | 
|  | ETH_ALEN); | 
|  | } else | 
|  | memset(data->ap_addr.sa_data, 0, ETH_ALEN); | 
|  |  | 
|  | spin_unlock_irqrestore(&wl->lock, irqflag); | 
|  | mutex_unlock(&wl->assoc_stat_lock); | 
|  | pr_debug("%s: ->\n", __func__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* SIOC{S,G}IWENCODEEXT */ | 
|  | static int gelic_wl_set_encodeext(struct net_device *netdev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *data, char *extra) | 
|  | { | 
|  | struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); | 
|  | struct iw_point *enc = &data->encoding; | 
|  | struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; | 
|  | __u16 alg; | 
|  | __u16 flags; | 
|  | unsigned long irqflag; | 
|  | int key_index; | 
|  | int ret = 0; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  | flags = enc->flags & IW_ENCODE_FLAGS; | 
|  | alg = ext->alg; | 
|  | key_index = enc->flags & IW_ENCODE_INDEX; | 
|  |  | 
|  | pr_debug("%s: key_index = %d\n", __func__, key_index); | 
|  | pr_debug("%s: key_len = %d\n", __func__, enc->length); | 
|  | pr_debug("%s: flag=%x\n", __func__, enc->flags & IW_ENCODE_FLAGS); | 
|  | pr_debug("%s: ext_flag=%x\n", __func__, ext->ext_flags); | 
|  | pr_debug("%s: ext_key_len=%x\n", __func__, ext->key_len); | 
|  |  | 
|  | if (GELIC_WEP_KEYS < key_index) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(&wl->lock, irqflag); | 
|  | if (key_index) | 
|  | key_index--; | 
|  | else | 
|  | key_index = wl->current_key; | 
|  |  | 
|  | if (!enc->length && (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)) { | 
|  | /* reques to change default key index */ | 
|  | pr_debug("%s: request to change default key to %d\n", | 
|  | __func__, key_index); | 
|  | wl->current_key = key_index; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (alg == IW_ENCODE_ALG_NONE || (flags & IW_ENCODE_DISABLED)) { | 
|  | pr_debug("%s: alg disabled\n", __func__); | 
|  | wl->wpa_level = GELIC_WL_WPA_LEVEL_NONE; | 
|  | wl->group_cipher_method = GELIC_WL_CIPHER_NONE; | 
|  | wl->pairwise_cipher_method = GELIC_WL_CIPHER_NONE; | 
|  | wl->auth_method = GELIC_EURUS_AUTH_OPEN; /* should be open */ | 
|  | } else if (alg == IW_ENCODE_ALG_WEP) { | 
|  | pr_debug("%s: WEP requested\n", __func__); | 
|  | if (flags & IW_ENCODE_OPEN) { | 
|  | pr_debug("%s: open key mode\n", __func__); | 
|  | wl->auth_method = GELIC_EURUS_AUTH_OPEN; | 
|  | } | 
|  | if (flags & IW_ENCODE_RESTRICTED) { | 
|  | pr_debug("%s: shared key mode\n", __func__); | 
|  | wl->auth_method = GELIC_EURUS_AUTH_SHARED; | 
|  | } | 
|  | if (IW_ENCODING_TOKEN_MAX < ext->key_len) { | 
|  | pr_info("%s: key is too long %d\n", __func__, | 
|  | ext->key_len); | 
|  | ret = -EINVAL; | 
|  | goto done; | 
|  | } | 
|  | /* OK, update the key */ | 
|  | wl->key_len[key_index] = ext->key_len; | 
|  | memset(wl->key[key_index], 0, IW_ENCODING_TOKEN_MAX); | 
|  | memcpy(wl->key[key_index], ext->key, ext->key_len); | 
|  | set_bit(key_index, &wl->key_enabled); | 
|  | /* remember wep info changed */ | 
|  | set_bit(GELIC_WL_STAT_CONFIGURED, &wl->stat); | 
|  | } else if (alg == IW_ENCODE_ALG_PMK) { | 
|  | if (ext->key_len != WPA_PSK_LEN) { | 
|  | pr_err("%s: PSK length wrong %d\n", __func__, | 
|  | ext->key_len); | 
|  | ret = -EINVAL; | 
|  | goto done; | 
|  | } | 
|  | memset(wl->psk, 0, sizeof(wl->psk)); | 
|  | memcpy(wl->psk, ext->key, ext->key_len); | 
|  | wl->psk_len = ext->key_len; | 
|  | wl->psk_type = GELIC_EURUS_WPA_PSK_BIN; | 
|  | /* remember PSK configured */ | 
|  | set_bit(GELIC_WL_STAT_WPA_PSK_SET, &wl->stat); | 
|  | } | 
|  | done: | 
|  | spin_unlock_irqrestore(&wl->lock, irqflag); | 
|  | pr_debug("%s: ->\n", __func__); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int gelic_wl_get_encodeext(struct net_device *netdev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *data, char *extra) | 
|  | { | 
|  | struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); | 
|  | struct iw_point *enc = &data->encoding; | 
|  | struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; | 
|  | unsigned long irqflag; | 
|  | int key_index; | 
|  | int ret = 0; | 
|  | int max_key_len; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  |  | 
|  | max_key_len = enc->length - sizeof(struct iw_encode_ext); | 
|  | if (max_key_len < 0) | 
|  | return -EINVAL; | 
|  | key_index = enc->flags & IW_ENCODE_INDEX; | 
|  |  | 
|  | pr_debug("%s: key_index = %d\n", __func__, key_index); | 
|  | pr_debug("%s: key_len = %d\n", __func__, enc->length); | 
|  | pr_debug("%s: flag=%x\n", __func__, enc->flags & IW_ENCODE_FLAGS); | 
|  |  | 
|  | if (GELIC_WEP_KEYS < key_index) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(&wl->lock, irqflag); | 
|  | if (key_index) | 
|  | key_index--; | 
|  | else | 
|  | key_index = wl->current_key; | 
|  |  | 
|  | memset(ext, 0, sizeof(struct iw_encode_ext)); | 
|  | switch (wl->group_cipher_method) { | 
|  | case GELIC_WL_CIPHER_WEP: | 
|  | ext->alg = IW_ENCODE_ALG_WEP; | 
|  | enc->flags |= IW_ENCODE_ENABLED; | 
|  | break; | 
|  | case GELIC_WL_CIPHER_TKIP: | 
|  | ext->alg = IW_ENCODE_ALG_TKIP; | 
|  | enc->flags |= IW_ENCODE_ENABLED; | 
|  | break; | 
|  | case GELIC_WL_CIPHER_AES: | 
|  | ext->alg = IW_ENCODE_ALG_CCMP; | 
|  | enc->flags |= IW_ENCODE_ENABLED; | 
|  | break; | 
|  | case GELIC_WL_CIPHER_NONE: | 
|  | default: | 
|  | ext->alg = IW_ENCODE_ALG_NONE; | 
|  | enc->flags |= IW_ENCODE_NOKEY; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!(enc->flags & IW_ENCODE_NOKEY)) { | 
|  | if (max_key_len < wl->key_len[key_index]) { | 
|  | ret = -E2BIG; | 
|  | goto out; | 
|  | } | 
|  | if (test_bit(key_index, &wl->key_enabled)) | 
|  | memcpy(ext->key, wl->key[key_index], | 
|  | wl->key_len[key_index]); | 
|  | else | 
|  | pr_debug("%s: disabled key requested ix=%d\n", | 
|  | __func__, key_index); | 
|  | } | 
|  | out: | 
|  | spin_unlock_irqrestore(&wl->lock, irqflag); | 
|  | pr_debug("%s: ->\n", __func__); | 
|  | return ret; | 
|  | } | 
|  | /* SIOC{S,G}IWMODE */ | 
|  | static int gelic_wl_set_mode(struct net_device *netdev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *data, char *extra) | 
|  | { | 
|  | __u32 mode = data->mode; | 
|  | int ret; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  | if (mode == IW_MODE_INFRA) | 
|  | ret = 0; | 
|  | else | 
|  | ret = -EOPNOTSUPP; | 
|  | pr_debug("%s: -> %d\n", __func__, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int gelic_wl_get_mode(struct net_device *netdev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *data, char *extra) | 
|  | { | 
|  | __u32 *mode = &data->mode; | 
|  | pr_debug("%s: <-\n", __func__); | 
|  | *mode = IW_MODE_INFRA; | 
|  | pr_debug("%s: ->\n", __func__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* SIOCGIWNICKN */ | 
|  | static int gelic_wl_get_nick(struct net_device *net_dev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *data, char *extra) | 
|  | { | 
|  | strcpy(extra, "gelic_wl"); | 
|  | data->data.length = strlen(extra); | 
|  | data->data.flags = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* --- */ | 
|  |  | 
|  | static struct iw_statistics *gelic_wl_get_wireless_stats( | 
|  | struct net_device *netdev) | 
|  | { | 
|  |  | 
|  | struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); | 
|  | struct gelic_eurus_cmd *cmd; | 
|  | struct iw_statistics *is; | 
|  | struct gelic_eurus_rssi_info *rssi; | 
|  | void *buf; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  |  | 
|  | buf = (void *)__get_free_page(GFP_KERNEL); | 
|  | if (!buf) | 
|  | return NULL; | 
|  |  | 
|  | is = &wl->iwstat; | 
|  | memset(is, 0, sizeof(*is)); | 
|  | cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_GET_RSSI_CFG, | 
|  | buf, sizeof(*rssi)); | 
|  | if (cmd && !cmd->status && !cmd->cmd_status) { | 
|  | rssi = buf; | 
|  | is->qual.level = be16_to_cpu(rssi->rssi); | 
|  | is->qual.updated = IW_QUAL_LEVEL_UPDATED | | 
|  | IW_QUAL_QUAL_INVALID | IW_QUAL_NOISE_INVALID; | 
|  | } else | 
|  | /* not associated */ | 
|  | is->qual.updated = IW_QUAL_ALL_INVALID; | 
|  |  | 
|  | kfree(cmd); | 
|  | free_page((unsigned long)buf); | 
|  | pr_debug("%s: ->\n", __func__); | 
|  | return is; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *  scanning helpers | 
|  | */ | 
|  | static int gelic_wl_start_scan(struct gelic_wl_info *wl, int always_scan, | 
|  | u8 *essid, size_t essid_len) | 
|  | { | 
|  | struct gelic_eurus_cmd *cmd; | 
|  | int ret = 0; | 
|  | void *buf = NULL; | 
|  | size_t len; | 
|  |  | 
|  | pr_debug("%s: <- always=%d\n", __func__, always_scan); | 
|  | if (mutex_lock_interruptible(&wl->scan_lock)) | 
|  | return -ERESTARTSYS; | 
|  |  | 
|  | /* | 
|  | * If already a scan in progress, do not trigger more | 
|  | */ | 
|  | if (wl->scan_stat == GELIC_WL_SCAN_STAT_SCANNING) { | 
|  | pr_debug("%s: scanning now\n", __func__); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | init_completion(&wl->scan_done); | 
|  | /* | 
|  | * If we have already a bss list, don't try to get new | 
|  | * unless we are doing an ESSID scan | 
|  | */ | 
|  | if ((!essid_len && !always_scan) | 
|  | && wl->scan_stat == GELIC_WL_SCAN_STAT_GOT_LIST) { | 
|  | pr_debug("%s: already has the list\n", __func__); | 
|  | complete(&wl->scan_done); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* ESSID scan ? */ | 
|  | if (essid_len && essid) { | 
|  | buf = (void *)__get_free_page(GFP_KERNEL); | 
|  | if (!buf) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  | len = IW_ESSID_MAX_SIZE; /* hypervisor always requires 32 */ | 
|  | memset(buf, 0, len); | 
|  | memcpy(buf, essid, essid_len); | 
|  | pr_debug("%s: essid scan='%s'\n", __func__, (char *)buf); | 
|  | } else | 
|  | len = 0; | 
|  |  | 
|  | /* | 
|  | * issue start scan request | 
|  | */ | 
|  | wl->scan_stat = GELIC_WL_SCAN_STAT_SCANNING; | 
|  | cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_START_SCAN, | 
|  | buf, len); | 
|  | if (!cmd || cmd->status || cmd->cmd_status) { | 
|  | wl->scan_stat = GELIC_WL_SCAN_STAT_INIT; | 
|  | complete(&wl->scan_done); | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  | kfree(cmd); | 
|  | out: | 
|  | free_page((unsigned long)buf); | 
|  | mutex_unlock(&wl->scan_lock); | 
|  | pr_debug("%s: ->\n", __func__); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * retrieve scan result from the chip (hypervisor) | 
|  | * this function is invoked by schedule work. | 
|  | */ | 
|  | static void gelic_wl_scan_complete_event(struct gelic_wl_info *wl) | 
|  | { | 
|  | struct gelic_eurus_cmd *cmd = NULL; | 
|  | struct gelic_wl_scan_info *target, *tmp; | 
|  | struct gelic_wl_scan_info *oldest = NULL; | 
|  | struct gelic_eurus_scan_info *scan_info; | 
|  | unsigned int scan_info_size; | 
|  | union iwreq_data data; | 
|  | unsigned long this_time = jiffies; | 
|  | unsigned int data_len, i, found, r; | 
|  | void *buf; | 
|  |  | 
|  | pr_debug("%s:start\n", __func__); | 
|  | mutex_lock(&wl->scan_lock); | 
|  |  | 
|  | buf = (void *)__get_free_page(GFP_KERNEL); | 
|  | if (!buf) { | 
|  | pr_info("%s: scan buffer alloc failed\n", __func__); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (wl->scan_stat != GELIC_WL_SCAN_STAT_SCANNING) { | 
|  | /* | 
|  | * stop() may be called while scanning, ignore result | 
|  | */ | 
|  | pr_debug("%s: scan complete when stat != scanning(%d)\n", | 
|  | __func__, wl->scan_stat); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_GET_SCAN, | 
|  | buf, PAGE_SIZE); | 
|  | if (!cmd || cmd->status || cmd->cmd_status) { | 
|  | wl->scan_stat = GELIC_WL_SCAN_STAT_INIT; | 
|  | pr_info("%s:cmd failed\n", __func__); | 
|  | kfree(cmd); | 
|  | goto out; | 
|  | } | 
|  | data_len = cmd->size; | 
|  | pr_debug("%s: data_len = %d\n", __func__, data_len); | 
|  | kfree(cmd); | 
|  |  | 
|  | /* OK, bss list retrieved */ | 
|  | wl->scan_stat = GELIC_WL_SCAN_STAT_GOT_LIST; | 
|  |  | 
|  | /* mark all entries are old */ | 
|  | list_for_each_entry_safe(target, tmp, &wl->network_list, list) { | 
|  | target->valid = 0; | 
|  | /* expire too old entries */ | 
|  | if (time_before(target->last_scanned + wl->scan_age, | 
|  | this_time)) { | 
|  | kfree(target->hwinfo); | 
|  | target->hwinfo = NULL; | 
|  | list_move_tail(&target->list, &wl->network_free_list); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* put them in the network_list */ | 
|  | for (i = 0, scan_info_size = 0, scan_info = buf; | 
|  | scan_info_size < data_len; | 
|  | i++, scan_info_size += be16_to_cpu(scan_info->size), | 
|  | scan_info = (void *)scan_info + be16_to_cpu(scan_info->size)) { | 
|  | pr_debug("%s:size=%d bssid=%pM scan_info=%p\n", __func__, | 
|  | be16_to_cpu(scan_info->size), | 
|  | &scan_info->bssid[2], scan_info); | 
|  |  | 
|  | /* | 
|  | * The wireless firmware may return invalid channel 0 and/or | 
|  | * invalid rate if the AP emits zero length SSID ie. As this | 
|  | * scan information is useless, ignore it | 
|  | */ | 
|  | if (!be16_to_cpu(scan_info->channel) || !scan_info->rate[0]) { | 
|  | pr_debug("%s: invalid scan info\n", __func__); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | found = 0; | 
|  | oldest = NULL; | 
|  | list_for_each_entry(target, &wl->network_list, list) { | 
|  | if (!compare_ether_addr(&target->hwinfo->bssid[2], | 
|  | &scan_info->bssid[2])) { | 
|  | found = 1; | 
|  | pr_debug("%s: same BBS found scanned list\n", | 
|  | __func__); | 
|  | break; | 
|  | } | 
|  | if (!oldest || | 
|  | (target->last_scanned < oldest->last_scanned)) | 
|  | oldest = target; | 
|  | } | 
|  |  | 
|  | if (!found) { | 
|  | /* not found in the list */ | 
|  | if (list_empty(&wl->network_free_list)) { | 
|  | /* expire oldest */ | 
|  | target = oldest; | 
|  | } else { | 
|  | target = list_entry(wl->network_free_list.next, | 
|  | struct gelic_wl_scan_info, | 
|  | list); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* update the item */ | 
|  | target->last_scanned = this_time; | 
|  | target->valid = 1; | 
|  | target->eurus_index = i; | 
|  | kfree(target->hwinfo); | 
|  | target->hwinfo = kzalloc(be16_to_cpu(scan_info->size), | 
|  | GFP_KERNEL); | 
|  | if (!target->hwinfo) { | 
|  | pr_info("%s: kzalloc failed\n", __func__); | 
|  | continue; | 
|  | } | 
|  | /* copy hw scan info */ | 
|  | memcpy(target->hwinfo, scan_info, scan_info->size); | 
|  | target->essid_len = strnlen(scan_info->essid, | 
|  | sizeof(scan_info->essid)); | 
|  | target->rate_len = 0; | 
|  | for (r = 0; r < 12; r++) | 
|  | if (scan_info->rate[r]) | 
|  | target->rate_len++; | 
|  | if (8 < target->rate_len) | 
|  | pr_info("%s: AP returns %d rates\n", __func__, | 
|  | target->rate_len); | 
|  | target->rate_ext_len = 0; | 
|  | for (r = 0; r < 16; r++) | 
|  | if (scan_info->ext_rate[r]) | 
|  | target->rate_ext_len++; | 
|  | list_move_tail(&target->list, &wl->network_list); | 
|  | } | 
|  | memset(&data, 0, sizeof(data)); | 
|  | wireless_send_event(port_to_netdev(wl_port(wl)), SIOCGIWSCAN, &data, | 
|  | NULL); | 
|  | out: | 
|  | free_page((unsigned long)buf); | 
|  | complete(&wl->scan_done); | 
|  | mutex_unlock(&wl->scan_lock); | 
|  | pr_debug("%s:end\n", __func__); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Select an appropriate bss from current scan list regarding | 
|  | * current settings from userspace. | 
|  | * The caller must hold wl->scan_lock, | 
|  | * and on the state of wl->scan_state == GELIC_WL_SCAN_GOT_LIST | 
|  | */ | 
|  | static void update_best(struct gelic_wl_scan_info **best, | 
|  | struct gelic_wl_scan_info *candid, | 
|  | int *best_weight, | 
|  | int *weight) | 
|  | { | 
|  | if (*best_weight < ++(*weight)) { | 
|  | *best_weight = *weight; | 
|  | *best = candid; | 
|  | } | 
|  | } | 
|  |  | 
|  | static | 
|  | struct gelic_wl_scan_info *gelic_wl_find_best_bss(struct gelic_wl_info *wl) | 
|  | { | 
|  | struct gelic_wl_scan_info *scan_info; | 
|  | struct gelic_wl_scan_info *best_bss; | 
|  | int weight, best_weight; | 
|  | u16 security; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  |  | 
|  | best_bss = NULL; | 
|  | best_weight = 0; | 
|  |  | 
|  | list_for_each_entry(scan_info, &wl->network_list, list) { | 
|  | pr_debug("%s: station %p\n", __func__, scan_info); | 
|  |  | 
|  | if (!scan_info->valid) { | 
|  | pr_debug("%s: station invalid\n", __func__); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* If bss specified, check it only */ | 
|  | if (test_bit(GELIC_WL_STAT_BSSID_SET, &wl->stat)) { | 
|  | if (!compare_ether_addr(&scan_info->hwinfo->bssid[2], | 
|  | wl->bssid)) { | 
|  | best_bss = scan_info; | 
|  | pr_debug("%s: bssid matched\n", __func__); | 
|  | break; | 
|  | } else { | 
|  | pr_debug("%s: bssid unmached\n", __func__); | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | weight = 0; | 
|  |  | 
|  | /* security */ | 
|  | security = be16_to_cpu(scan_info->hwinfo->security) & | 
|  | GELIC_EURUS_SCAN_SEC_MASK; | 
|  | if (wl->wpa_level == GELIC_WL_WPA_LEVEL_WPA2) { | 
|  | if (security == GELIC_EURUS_SCAN_SEC_WPA2) | 
|  | update_best(&best_bss, scan_info, | 
|  | &best_weight, &weight); | 
|  | else | 
|  | continue; | 
|  | } else if (wl->wpa_level == GELIC_WL_WPA_LEVEL_WPA) { | 
|  | if (security == GELIC_EURUS_SCAN_SEC_WPA) | 
|  | update_best(&best_bss, scan_info, | 
|  | &best_weight, &weight); | 
|  | else | 
|  | continue; | 
|  | } else if (wl->wpa_level == GELIC_WL_WPA_LEVEL_NONE && | 
|  | wl->group_cipher_method == GELIC_WL_CIPHER_WEP) { | 
|  | if (security == GELIC_EURUS_SCAN_SEC_WEP) | 
|  | update_best(&best_bss, scan_info, | 
|  | &best_weight, &weight); | 
|  | else | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* If ESSID is set, check it */ | 
|  | if (test_bit(GELIC_WL_STAT_ESSID_SET, &wl->stat)) { | 
|  | if ((scan_info->essid_len == wl->essid_len) && | 
|  | !strncmp(wl->essid, | 
|  | scan_info->hwinfo->essid, | 
|  | scan_info->essid_len)) | 
|  | update_best(&best_bss, scan_info, | 
|  | &best_weight, &weight); | 
|  | else | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef DEBUG | 
|  | pr_debug("%s: -> bss=%p\n", __func__, best_bss); | 
|  | if (best_bss) { | 
|  | pr_debug("%s:addr=%pM\n", __func__, | 
|  | &best_bss->hwinfo->bssid[2]); | 
|  | } | 
|  | #endif | 
|  | return best_bss; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Setup WEP configuration to the chip | 
|  | * The caller must hold wl->scan_lock, | 
|  | * and on the state of wl->scan_state == GELIC_WL_SCAN_GOT_LIST | 
|  | */ | 
|  | static int gelic_wl_do_wep_setup(struct gelic_wl_info *wl) | 
|  | { | 
|  | unsigned int i; | 
|  | struct gelic_eurus_wep_cfg *wep; | 
|  | struct gelic_eurus_cmd *cmd; | 
|  | int wep104 = 0; | 
|  | int have_key = 0; | 
|  | int ret = 0; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  | /* we can assume no one should uses the buffer */ | 
|  | wep = (struct gelic_eurus_wep_cfg *)__get_free_page(GFP_KERNEL); | 
|  | if (!wep) | 
|  | return -ENOMEM; | 
|  |  | 
|  | memset(wep, 0, sizeof(*wep)); | 
|  |  | 
|  | if (wl->group_cipher_method == GELIC_WL_CIPHER_WEP) { | 
|  | pr_debug("%s: WEP mode\n", __func__); | 
|  | for (i = 0; i < GELIC_WEP_KEYS; i++) { | 
|  | if (!test_bit(i, &wl->key_enabled)) | 
|  | continue; | 
|  |  | 
|  | pr_debug("%s: key#%d enabled\n", __func__, i); | 
|  | have_key = 1; | 
|  | if (wl->key_len[i] == 13) | 
|  | wep104 = 1; | 
|  | else if (wl->key_len[i] != 5) { | 
|  | pr_info("%s: wrong wep key[%d]=%d\n", | 
|  | __func__, i, wl->key_len[i]); | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  | memcpy(wep->key[i], wl->key[i], wl->key_len[i]); | 
|  | } | 
|  |  | 
|  | if (!have_key) { | 
|  | pr_info("%s: all wep key disabled\n", __func__); | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (wep104) { | 
|  | pr_debug("%s: 104bit key\n", __func__); | 
|  | wep->security = cpu_to_be16(GELIC_EURUS_WEP_SEC_104BIT); | 
|  | } else { | 
|  | pr_debug("%s: 40bit key\n", __func__); | 
|  | wep->security = cpu_to_be16(GELIC_EURUS_WEP_SEC_40BIT); | 
|  | } | 
|  | } else { | 
|  | pr_debug("%s: NO encryption\n", __func__); | 
|  | wep->security = cpu_to_be16(GELIC_EURUS_WEP_SEC_NONE); | 
|  | } | 
|  |  | 
|  | /* issue wep setup */ | 
|  | cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_SET_WEP_CFG, | 
|  | wep, sizeof(*wep)); | 
|  | if (!cmd) | 
|  | ret = -ENOMEM; | 
|  | else if (cmd->status || cmd->cmd_status) | 
|  | ret = -ENXIO; | 
|  |  | 
|  | kfree(cmd); | 
|  | out: | 
|  | free_page((unsigned long)wep); | 
|  | pr_debug("%s: ->\n", __func__); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #ifdef DEBUG | 
|  | static const char *wpasecstr(enum gelic_eurus_wpa_security sec) | 
|  | { | 
|  | switch (sec) { | 
|  | case GELIC_EURUS_WPA_SEC_NONE: | 
|  | return "NONE"; | 
|  | break; | 
|  | case GELIC_EURUS_WPA_SEC_WPA_TKIP_TKIP: | 
|  | return "WPA_TKIP_TKIP"; | 
|  | break; | 
|  | case GELIC_EURUS_WPA_SEC_WPA_TKIP_AES: | 
|  | return "WPA_TKIP_AES"; | 
|  | break; | 
|  | case GELIC_EURUS_WPA_SEC_WPA_AES_AES: | 
|  | return "WPA_AES_AES"; | 
|  | break; | 
|  | case GELIC_EURUS_WPA_SEC_WPA2_TKIP_TKIP: | 
|  | return "WPA2_TKIP_TKIP"; | 
|  | break; | 
|  | case GELIC_EURUS_WPA_SEC_WPA2_TKIP_AES: | 
|  | return "WPA2_TKIP_AES"; | 
|  | break; | 
|  | case GELIC_EURUS_WPA_SEC_WPA2_AES_AES: | 
|  | return "WPA2_AES_AES"; | 
|  | break; | 
|  | } | 
|  | return ""; | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | static int gelic_wl_do_wpa_setup(struct gelic_wl_info *wl) | 
|  | { | 
|  | struct gelic_eurus_wpa_cfg *wpa; | 
|  | struct gelic_eurus_cmd *cmd; | 
|  | u16 security; | 
|  | int ret = 0; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  | /* we can assume no one should uses the buffer */ | 
|  | wpa = (struct gelic_eurus_wpa_cfg *)__get_free_page(GFP_KERNEL); | 
|  | if (!wpa) | 
|  | return -ENOMEM; | 
|  |  | 
|  | memset(wpa, 0, sizeof(*wpa)); | 
|  |  | 
|  | if (!test_bit(GELIC_WL_STAT_WPA_PSK_SET, &wl->stat)) | 
|  | pr_info("%s: PSK not configured yet\n", __func__); | 
|  |  | 
|  | /* copy key */ | 
|  | memcpy(wpa->psk, wl->psk, wl->psk_len); | 
|  |  | 
|  | /* set security level */ | 
|  | if (wl->wpa_level == GELIC_WL_WPA_LEVEL_WPA2) { | 
|  | if (wl->group_cipher_method == GELIC_WL_CIPHER_AES) { | 
|  | security = GELIC_EURUS_WPA_SEC_WPA2_AES_AES; | 
|  | } else { | 
|  | if (wl->pairwise_cipher_method == GELIC_WL_CIPHER_AES && | 
|  | precise_ie()) | 
|  | security = GELIC_EURUS_WPA_SEC_WPA2_TKIP_AES; | 
|  | else | 
|  | security = GELIC_EURUS_WPA_SEC_WPA2_TKIP_TKIP; | 
|  | } | 
|  | } else { | 
|  | if (wl->group_cipher_method == GELIC_WL_CIPHER_AES) { | 
|  | security = GELIC_EURUS_WPA_SEC_WPA_AES_AES; | 
|  | } else { | 
|  | if (wl->pairwise_cipher_method == GELIC_WL_CIPHER_AES && | 
|  | precise_ie()) | 
|  | security = GELIC_EURUS_WPA_SEC_WPA_TKIP_AES; | 
|  | else | 
|  | security = GELIC_EURUS_WPA_SEC_WPA_TKIP_TKIP; | 
|  | } | 
|  | } | 
|  | wpa->security = cpu_to_be16(security); | 
|  |  | 
|  | /* PSK type */ | 
|  | wpa->psk_type = cpu_to_be16(wl->psk_type); | 
|  | #ifdef DEBUG | 
|  | pr_debug("%s: sec=%s psktype=%s\n", __func__, | 
|  | wpasecstr(wpa->security), | 
|  | (wpa->psk_type == GELIC_EURUS_WPA_PSK_BIN) ? | 
|  | "BIN" : "passphrase"); | 
|  | #if 0 | 
|  | /* | 
|  | * don't enable here if you plan to submit | 
|  | * the debug log because this dumps your precious | 
|  | * passphrase/key. | 
|  | */ | 
|  | pr_debug("%s: psk=%s\n", __func__, | 
|  | (wpa->psk_type == GELIC_EURUS_WPA_PSK_BIN) ? | 
|  | "N/A" : wpa->psk); | 
|  | #endif | 
|  | #endif | 
|  | /* issue wpa setup */ | 
|  | cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_SET_WPA_CFG, | 
|  | wpa, sizeof(*wpa)); | 
|  | if (!cmd) | 
|  | ret = -ENOMEM; | 
|  | else if (cmd->status || cmd->cmd_status) | 
|  | ret = -ENXIO; | 
|  | kfree(cmd); | 
|  | free_page((unsigned long)wpa); | 
|  | pr_debug("%s: --> %d\n", __func__, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Start association. caller must hold assoc_stat_lock | 
|  | */ | 
|  | static int gelic_wl_associate_bss(struct gelic_wl_info *wl, | 
|  | struct gelic_wl_scan_info *bss) | 
|  | { | 
|  | struct gelic_eurus_cmd *cmd; | 
|  | struct gelic_eurus_common_cfg *common; | 
|  | int ret = 0; | 
|  | unsigned long rc; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  |  | 
|  | /* do common config */ | 
|  | common = (struct gelic_eurus_common_cfg *)__get_free_page(GFP_KERNEL); | 
|  | if (!common) | 
|  | return -ENOMEM; | 
|  |  | 
|  | memset(common, 0, sizeof(*common)); | 
|  | common->bss_type = cpu_to_be16(GELIC_EURUS_BSS_INFRA); | 
|  | common->op_mode = cpu_to_be16(GELIC_EURUS_OPMODE_11BG); | 
|  |  | 
|  | common->scan_index = cpu_to_be16(bss->eurus_index); | 
|  | switch (wl->auth_method) { | 
|  | case GELIC_EURUS_AUTH_OPEN: | 
|  | common->auth_method = cpu_to_be16(GELIC_EURUS_AUTH_OPEN); | 
|  | break; | 
|  | case GELIC_EURUS_AUTH_SHARED: | 
|  | common->auth_method = cpu_to_be16(GELIC_EURUS_AUTH_SHARED); | 
|  | break; | 
|  | } | 
|  |  | 
|  | #ifdef DEBUG | 
|  | scan_list_dump(wl); | 
|  | #endif | 
|  | pr_debug("%s: common cfg index=%d bsstype=%d auth=%d\n", __func__, | 
|  | be16_to_cpu(common->scan_index), | 
|  | be16_to_cpu(common->bss_type), | 
|  | be16_to_cpu(common->auth_method)); | 
|  |  | 
|  | cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_SET_COMMON_CFG, | 
|  | common, sizeof(*common)); | 
|  | if (!cmd || cmd->status || cmd->cmd_status) { | 
|  | ret = -ENOMEM; | 
|  | kfree(cmd); | 
|  | goto out; | 
|  | } | 
|  | kfree(cmd); | 
|  |  | 
|  | /* WEP/WPA */ | 
|  | switch (wl->wpa_level) { | 
|  | case GELIC_WL_WPA_LEVEL_NONE: | 
|  | /* If WEP or no security, setup WEP config */ | 
|  | ret = gelic_wl_do_wep_setup(wl); | 
|  | break; | 
|  | case GELIC_WL_WPA_LEVEL_WPA: | 
|  | case GELIC_WL_WPA_LEVEL_WPA2: | 
|  | ret = gelic_wl_do_wpa_setup(wl); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (ret) { | 
|  | pr_debug("%s: WEP/WPA setup failed %d\n", __func__, | 
|  | ret); | 
|  | ret = -EPERM; | 
|  | gelic_wl_send_iwap_event(wl, NULL); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* start association */ | 
|  | init_completion(&wl->assoc_done); | 
|  | wl->assoc_stat = GELIC_WL_ASSOC_STAT_ASSOCIATING; | 
|  | cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_ASSOC, | 
|  | NULL, 0); | 
|  | if (!cmd || cmd->status || cmd->cmd_status) { | 
|  | pr_debug("%s: assoc request failed\n", __func__); | 
|  | wl->assoc_stat = GELIC_WL_ASSOC_STAT_DISCONN; | 
|  | kfree(cmd); | 
|  | ret = -ENOMEM; | 
|  | gelic_wl_send_iwap_event(wl, NULL); | 
|  | goto out; | 
|  | } | 
|  | kfree(cmd); | 
|  |  | 
|  | /* wait for connected event */ | 
|  | rc = wait_for_completion_timeout(&wl->assoc_done, HZ * 4);/*FIXME*/ | 
|  |  | 
|  | if (!rc) { | 
|  | /* timeouted.  Maybe key or cyrpt mode is wrong */ | 
|  | pr_info("%s: connect timeout\n", __func__); | 
|  | cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_DISASSOC, | 
|  | NULL, 0); | 
|  | kfree(cmd); | 
|  | wl->assoc_stat = GELIC_WL_ASSOC_STAT_DISCONN; | 
|  | gelic_wl_send_iwap_event(wl, NULL); | 
|  | ret = -ENXIO; | 
|  | } else { | 
|  | wl->assoc_stat = GELIC_WL_ASSOC_STAT_ASSOCIATED; | 
|  | /* copy bssid */ | 
|  | memcpy(wl->active_bssid, &bss->hwinfo->bssid[2], ETH_ALEN); | 
|  |  | 
|  | /* send connect event */ | 
|  | gelic_wl_send_iwap_event(wl, wl->active_bssid); | 
|  | pr_info("%s: connected\n", __func__); | 
|  | } | 
|  | out: | 
|  | free_page((unsigned long)common); | 
|  | pr_debug("%s: ->\n", __func__); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * connected event | 
|  | */ | 
|  | static void gelic_wl_connected_event(struct gelic_wl_info *wl, | 
|  | u64 event) | 
|  | { | 
|  | u64 desired_event = 0; | 
|  |  | 
|  | switch (wl->wpa_level) { | 
|  | case GELIC_WL_WPA_LEVEL_NONE: | 
|  | desired_event = GELIC_LV1_WL_EVENT_CONNECTED; | 
|  | break; | 
|  | case GELIC_WL_WPA_LEVEL_WPA: | 
|  | case GELIC_WL_WPA_LEVEL_WPA2: | 
|  | desired_event = GELIC_LV1_WL_EVENT_WPA_CONNECTED; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (desired_event == event) { | 
|  | pr_debug("%s: completed\n", __func__); | 
|  | complete(&wl->assoc_done); | 
|  | netif_carrier_on(port_to_netdev(wl_port(wl))); | 
|  | } else | 
|  | pr_debug("%s: event %#llx under wpa\n", | 
|  | __func__, event); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * disconnect event | 
|  | */ | 
|  | static void gelic_wl_disconnect_event(struct gelic_wl_info *wl, | 
|  | u64 event) | 
|  | { | 
|  | struct gelic_eurus_cmd *cmd; | 
|  | int lock; | 
|  |  | 
|  | /* | 
|  | * If we fall here in the middle of association, | 
|  | * associate_bss() should be waiting for complation of | 
|  | * wl->assoc_done. | 
|  | * As it waits with timeout, just leave assoc_done | 
|  | * uncompleted, then it terminates with timeout | 
|  | */ | 
|  | if (!mutex_trylock(&wl->assoc_stat_lock)) { | 
|  | pr_debug("%s: already locked\n", __func__); | 
|  | lock = 0; | 
|  | } else { | 
|  | pr_debug("%s: obtain lock\n", __func__); | 
|  | lock = 1; | 
|  | } | 
|  |  | 
|  | cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_DISASSOC, NULL, 0); | 
|  | kfree(cmd); | 
|  |  | 
|  | /* send disconnected event to the supplicant */ | 
|  | if (wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED) | 
|  | gelic_wl_send_iwap_event(wl, NULL); | 
|  |  | 
|  | wl->assoc_stat = GELIC_WL_ASSOC_STAT_DISCONN; | 
|  | netif_carrier_off(port_to_netdev(wl_port(wl))); | 
|  |  | 
|  | if (lock) | 
|  | mutex_unlock(&wl->assoc_stat_lock); | 
|  | } | 
|  | /* | 
|  | * event worker | 
|  | */ | 
|  | #ifdef DEBUG | 
|  | static const char *eventstr(enum gelic_lv1_wl_event event) | 
|  | { | 
|  | static char buf[32]; | 
|  | char *ret; | 
|  | if (event & GELIC_LV1_WL_EVENT_DEVICE_READY) | 
|  | ret = "EURUS_READY"; | 
|  | else if (event & GELIC_LV1_WL_EVENT_SCAN_COMPLETED) | 
|  | ret = "SCAN_COMPLETED"; | 
|  | else if (event & GELIC_LV1_WL_EVENT_DEAUTH) | 
|  | ret = "DEAUTH"; | 
|  | else if (event & GELIC_LV1_WL_EVENT_BEACON_LOST) | 
|  | ret = "BEACON_LOST"; | 
|  | else if (event & GELIC_LV1_WL_EVENT_CONNECTED) | 
|  | ret = "CONNECTED"; | 
|  | else if (event & GELIC_LV1_WL_EVENT_WPA_CONNECTED) | 
|  | ret = "WPA_CONNECTED"; | 
|  | else if (event & GELIC_LV1_WL_EVENT_WPA_ERROR) | 
|  | ret = "WPA_ERROR"; | 
|  | else { | 
|  | sprintf(buf, "Unknown(%#x)", event); | 
|  | ret = buf; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  | #else | 
|  | static const char *eventstr(enum gelic_lv1_wl_event event) | 
|  | { | 
|  | return NULL; | 
|  | } | 
|  | #endif | 
|  | static void gelic_wl_event_worker(struct work_struct *work) | 
|  | { | 
|  | struct gelic_wl_info *wl; | 
|  | struct gelic_port *port; | 
|  | u64 event, tmp; | 
|  | int status; | 
|  |  | 
|  | pr_debug("%s:start\n", __func__); | 
|  | wl = container_of(work, struct gelic_wl_info, event_work.work); | 
|  | port = wl_port(wl); | 
|  | while (1) { | 
|  | status = lv1_net_control(bus_id(port->card), dev_id(port->card), | 
|  | GELIC_LV1_GET_WLAN_EVENT, 0, 0, 0, | 
|  | &event, &tmp); | 
|  | if (status) { | 
|  | if (status != LV1_NO_ENTRY) | 
|  | pr_debug("%s:wlan event failed %d\n", | 
|  | __func__, status); | 
|  | /* got all events */ | 
|  | pr_debug("%s:end\n", __func__); | 
|  | return; | 
|  | } | 
|  | pr_debug("%s: event=%s\n", __func__, eventstr(event)); | 
|  | switch (event) { | 
|  | case GELIC_LV1_WL_EVENT_SCAN_COMPLETED: | 
|  | gelic_wl_scan_complete_event(wl); | 
|  | break; | 
|  | case GELIC_LV1_WL_EVENT_BEACON_LOST: | 
|  | case GELIC_LV1_WL_EVENT_DEAUTH: | 
|  | gelic_wl_disconnect_event(wl, event); | 
|  | break; | 
|  | case GELIC_LV1_WL_EVENT_CONNECTED: | 
|  | case GELIC_LV1_WL_EVENT_WPA_CONNECTED: | 
|  | gelic_wl_connected_event(wl, event); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } /* while */ | 
|  | } | 
|  | /* | 
|  | * association worker | 
|  | */ | 
|  | static void gelic_wl_assoc_worker(struct work_struct *work) | 
|  | { | 
|  | struct gelic_wl_info *wl; | 
|  |  | 
|  | struct gelic_wl_scan_info *best_bss; | 
|  | int ret; | 
|  | unsigned long irqflag; | 
|  | u8 *essid; | 
|  | size_t essid_len; | 
|  |  | 
|  | wl = container_of(work, struct gelic_wl_info, assoc_work.work); | 
|  |  | 
|  | mutex_lock(&wl->assoc_stat_lock); | 
|  |  | 
|  | if (wl->assoc_stat != GELIC_WL_ASSOC_STAT_DISCONN) | 
|  | goto out; | 
|  |  | 
|  | spin_lock_irqsave(&wl->lock, irqflag); | 
|  | if (test_bit(GELIC_WL_STAT_ESSID_SET, &wl->stat)) { | 
|  | pr_debug("%s: assoc ESSID configured %s\n", __func__, | 
|  | wl->essid); | 
|  | essid = wl->essid; | 
|  | essid_len = wl->essid_len; | 
|  | } else { | 
|  | essid = NULL; | 
|  | essid_len = 0; | 
|  | } | 
|  | spin_unlock_irqrestore(&wl->lock, irqflag); | 
|  |  | 
|  | ret = gelic_wl_start_scan(wl, 0, essid, essid_len); | 
|  | if (ret == -ERESTARTSYS) { | 
|  | pr_debug("%s: scan start failed association\n", __func__); | 
|  | schedule_delayed_work(&wl->assoc_work, HZ/10); /*FIXME*/ | 
|  | goto out; | 
|  | } else if (ret) { | 
|  | pr_info("%s: scan prerequisite failed\n", __func__); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Wait for bss scan completion | 
|  | * If we have scan list already, gelic_wl_start_scan() | 
|  | * returns OK and raises the complete.  Thus, | 
|  | * it's ok to wait unconditionally here | 
|  | */ | 
|  | wait_for_completion(&wl->scan_done); | 
|  |  | 
|  | pr_debug("%s: scan done\n", __func__); | 
|  | mutex_lock(&wl->scan_lock); | 
|  | if (wl->scan_stat != GELIC_WL_SCAN_STAT_GOT_LIST) { | 
|  | gelic_wl_send_iwap_event(wl, NULL); | 
|  | pr_info("%s: no scan list. association failed\n", __func__); | 
|  | goto scan_lock_out; | 
|  | } | 
|  |  | 
|  | /* find best matching bss */ | 
|  | best_bss = gelic_wl_find_best_bss(wl); | 
|  | if (!best_bss) { | 
|  | gelic_wl_send_iwap_event(wl, NULL); | 
|  | pr_info("%s: no bss matched. association failed\n", __func__); | 
|  | goto scan_lock_out; | 
|  | } | 
|  |  | 
|  | /* ok, do association */ | 
|  | ret = gelic_wl_associate_bss(wl, best_bss); | 
|  | if (ret) | 
|  | pr_info("%s: association failed %d\n", __func__, ret); | 
|  | scan_lock_out: | 
|  | mutex_unlock(&wl->scan_lock); | 
|  | out: | 
|  | mutex_unlock(&wl->assoc_stat_lock); | 
|  | } | 
|  | /* | 
|  | * Interrupt handler | 
|  | * Called from the ethernet interrupt handler | 
|  | * Processes wireless specific virtual interrupts only | 
|  | */ | 
|  | void gelic_wl_interrupt(struct net_device *netdev, u64 status) | 
|  | { | 
|  | struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); | 
|  |  | 
|  | if (status & GELIC_CARD_WLAN_COMMAND_COMPLETED) { | 
|  | pr_debug("%s:cmd complete\n", __func__); | 
|  | complete(&wl->cmd_done_intr); | 
|  | } | 
|  |  | 
|  | if (status & GELIC_CARD_WLAN_EVENT_RECEIVED) { | 
|  | pr_debug("%s:event received\n", __func__); | 
|  | queue_delayed_work(wl->event_queue, &wl->event_work, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * driver helpers | 
|  | */ | 
|  | static const iw_handler gelic_wl_wext_handler[] = | 
|  | { | 
|  | IW_HANDLER(SIOCGIWNAME, gelic_wl_get_name), | 
|  | IW_HANDLER(SIOCGIWRANGE, gelic_wl_get_range), | 
|  | IW_HANDLER(SIOCSIWSCAN, gelic_wl_set_scan), | 
|  | IW_HANDLER(SIOCGIWSCAN, gelic_wl_get_scan), | 
|  | IW_HANDLER(SIOCSIWAUTH, gelic_wl_set_auth), | 
|  | IW_HANDLER(SIOCGIWAUTH, gelic_wl_get_auth), | 
|  | IW_HANDLER(SIOCSIWESSID, gelic_wl_set_essid), | 
|  | IW_HANDLER(SIOCGIWESSID, gelic_wl_get_essid), | 
|  | IW_HANDLER(SIOCSIWENCODE, gelic_wl_set_encode), | 
|  | IW_HANDLER(SIOCGIWENCODE, gelic_wl_get_encode), | 
|  | IW_HANDLER(SIOCSIWAP, gelic_wl_set_ap), | 
|  | IW_HANDLER(SIOCGIWAP, gelic_wl_get_ap), | 
|  | IW_HANDLER(SIOCSIWENCODEEXT, gelic_wl_set_encodeext), | 
|  | IW_HANDLER(SIOCGIWENCODEEXT, gelic_wl_get_encodeext), | 
|  | IW_HANDLER(SIOCSIWMODE, gelic_wl_set_mode), | 
|  | IW_HANDLER(SIOCGIWMODE, gelic_wl_get_mode), | 
|  | IW_HANDLER(SIOCGIWNICKN, gelic_wl_get_nick), | 
|  | }; | 
|  |  | 
|  | static const struct iw_handler_def gelic_wl_wext_handler_def = { | 
|  | .num_standard		= ARRAY_SIZE(gelic_wl_wext_handler), | 
|  | .standard		= gelic_wl_wext_handler, | 
|  | .get_wireless_stats	= gelic_wl_get_wireless_stats, | 
|  | }; | 
|  |  | 
|  | static struct net_device * __devinit gelic_wl_alloc(struct gelic_card *card) | 
|  | { | 
|  | struct net_device *netdev; | 
|  | struct gelic_port *port; | 
|  | struct gelic_wl_info *wl; | 
|  | unsigned int i; | 
|  |  | 
|  | pr_debug("%s:start\n", __func__); | 
|  | netdev = alloc_etherdev(sizeof(struct gelic_port) + | 
|  | sizeof(struct gelic_wl_info)); | 
|  | pr_debug("%s: netdev =%p card=%p\n", __func__, netdev, card); | 
|  | if (!netdev) | 
|  | return NULL; | 
|  |  | 
|  | strcpy(netdev->name, "wlan%d"); | 
|  |  | 
|  | port = netdev_priv(netdev); | 
|  | port->netdev = netdev; | 
|  | port->card = card; | 
|  | port->type = GELIC_PORT_WIRELESS; | 
|  |  | 
|  | wl = port_wl(port); | 
|  | pr_debug("%s: wl=%p port=%p\n", __func__, wl, port); | 
|  |  | 
|  | /* allocate scan list */ | 
|  | wl->networks = kzalloc(sizeof(struct gelic_wl_scan_info) * | 
|  | GELIC_WL_BSS_MAX_ENT, GFP_KERNEL); | 
|  |  | 
|  | if (!wl->networks) | 
|  | goto fail_bss; | 
|  |  | 
|  | wl->eurus_cmd_queue = create_singlethread_workqueue("gelic_cmd"); | 
|  | if (!wl->eurus_cmd_queue) | 
|  | goto fail_cmd_workqueue; | 
|  |  | 
|  | wl->event_queue = create_singlethread_workqueue("gelic_event"); | 
|  | if (!wl->event_queue) | 
|  | goto fail_event_workqueue; | 
|  |  | 
|  | INIT_LIST_HEAD(&wl->network_free_list); | 
|  | INIT_LIST_HEAD(&wl->network_list); | 
|  | for (i = 0; i < GELIC_WL_BSS_MAX_ENT; i++) | 
|  | list_add_tail(&wl->networks[i].list, | 
|  | &wl->network_free_list); | 
|  | init_completion(&wl->cmd_done_intr); | 
|  |  | 
|  | INIT_DELAYED_WORK(&wl->event_work, gelic_wl_event_worker); | 
|  | INIT_DELAYED_WORK(&wl->assoc_work, gelic_wl_assoc_worker); | 
|  | mutex_init(&wl->scan_lock); | 
|  | mutex_init(&wl->assoc_stat_lock); | 
|  |  | 
|  | init_completion(&wl->scan_done); | 
|  | /* for the case that no scan request is issued and stop() is called */ | 
|  | complete(&wl->scan_done); | 
|  |  | 
|  | spin_lock_init(&wl->lock); | 
|  |  | 
|  | wl->scan_age = 5*HZ; /* FIXME */ | 
|  |  | 
|  | /* buffer for receiving scanned list etc */ | 
|  | BUILD_BUG_ON(PAGE_SIZE < | 
|  | sizeof(struct gelic_eurus_scan_info) * | 
|  | GELIC_EURUS_MAX_SCAN); | 
|  | pr_debug("%s:end\n", __func__); | 
|  | return netdev; | 
|  |  | 
|  | fail_event_workqueue: | 
|  | destroy_workqueue(wl->eurus_cmd_queue); | 
|  | fail_cmd_workqueue: | 
|  | kfree(wl->networks); | 
|  | fail_bss: | 
|  | free_netdev(netdev); | 
|  | pr_debug("%s:end error\n", __func__); | 
|  | return NULL; | 
|  |  | 
|  | } | 
|  |  | 
|  | static void gelic_wl_free(struct gelic_wl_info *wl) | 
|  | { | 
|  | struct gelic_wl_scan_info *scan_info; | 
|  | unsigned int i; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  |  | 
|  | pr_debug("%s: destroy queues\n", __func__); | 
|  | destroy_workqueue(wl->eurus_cmd_queue); | 
|  | destroy_workqueue(wl->event_queue); | 
|  |  | 
|  | scan_info = wl->networks; | 
|  | for (i = 0; i < GELIC_WL_BSS_MAX_ENT; i++, scan_info++) | 
|  | kfree(scan_info->hwinfo); | 
|  | kfree(wl->networks); | 
|  |  | 
|  | free_netdev(port_to_netdev(wl_port(wl))); | 
|  |  | 
|  | pr_debug("%s: ->\n", __func__); | 
|  | } | 
|  |  | 
|  | static int gelic_wl_try_associate(struct net_device *netdev) | 
|  | { | 
|  | struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); | 
|  | int ret = -1; | 
|  | unsigned int i; | 
|  |  | 
|  | pr_debug("%s: <-\n", __func__); | 
|  |  | 
|  | /* check constraits for start association */ | 
|  | /* for no access restriction AP */ | 
|  | if (wl->group_cipher_method == GELIC_WL_CIPHER_NONE) { | 
|  | if (test_bit(GELIC_WL_STAT_CONFIGURED, | 
|  | &wl->stat)) | 
|  | goto do_associate; | 
|  | else { | 
|  | pr_debug("%s: no wep, not configured\n", __func__); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* for WEP, one of four keys should be set */ | 
|  | if (wl->group_cipher_method == GELIC_WL_CIPHER_WEP) { | 
|  | /* one of keys set */ | 
|  | for (i = 0; i < GELIC_WEP_KEYS; i++) { | 
|  | if (test_bit(i, &wl->key_enabled)) | 
|  | goto do_associate; | 
|  | } | 
|  | pr_debug("%s: WEP, but no key specified\n", __func__); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* for WPA[2], psk should be set */ | 
|  | if ((wl->group_cipher_method == GELIC_WL_CIPHER_TKIP) || | 
|  | (wl->group_cipher_method == GELIC_WL_CIPHER_AES)) { | 
|  | if (test_bit(GELIC_WL_STAT_WPA_PSK_SET, | 
|  | &wl->stat)) | 
|  | goto do_associate; | 
|  | else { | 
|  | pr_debug("%s: AES/TKIP, but PSK not configured\n", | 
|  | __func__); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | do_associate: | 
|  | ret = schedule_delayed_work(&wl->assoc_work, 0); | 
|  | pr_debug("%s: start association work %d\n", __func__, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * netdev handlers | 
|  | */ | 
|  | static int gelic_wl_open(struct net_device *netdev) | 
|  | { | 
|  | struct gelic_card *card = netdev_card(netdev); | 
|  |  | 
|  | pr_debug("%s:->%p\n", __func__, netdev); | 
|  |  | 
|  | gelic_card_up(card); | 
|  |  | 
|  | /* try to associate */ | 
|  | gelic_wl_try_associate(netdev); | 
|  |  | 
|  | netif_start_queue(netdev); | 
|  |  | 
|  | pr_debug("%s:<-\n", __func__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * reset state machine | 
|  | */ | 
|  | static int gelic_wl_reset_state(struct gelic_wl_info *wl) | 
|  | { | 
|  | struct gelic_wl_scan_info *target; | 
|  | struct gelic_wl_scan_info *tmp; | 
|  |  | 
|  | /* empty scan list */ | 
|  | list_for_each_entry_safe(target, tmp, &wl->network_list, list) { | 
|  | list_move_tail(&target->list, &wl->network_free_list); | 
|  | } | 
|  | wl->scan_stat = GELIC_WL_SCAN_STAT_INIT; | 
|  |  | 
|  | /* clear configuration */ | 
|  | wl->auth_method = GELIC_EURUS_AUTH_OPEN; | 
|  | wl->group_cipher_method = GELIC_WL_CIPHER_NONE; | 
|  | wl->pairwise_cipher_method = GELIC_WL_CIPHER_NONE; | 
|  | wl->wpa_level = GELIC_WL_WPA_LEVEL_NONE; | 
|  |  | 
|  | wl->key_enabled = 0; | 
|  | wl->current_key = 0; | 
|  |  | 
|  | wl->psk_type = GELIC_EURUS_WPA_PSK_PASSPHRASE; | 
|  | wl->psk_len = 0; | 
|  |  | 
|  | wl->essid_len = 0; | 
|  | memset(wl->essid, 0, sizeof(wl->essid)); | 
|  | memset(wl->bssid, 0, sizeof(wl->bssid)); | 
|  | memset(wl->active_bssid, 0, sizeof(wl->active_bssid)); | 
|  |  | 
|  | wl->assoc_stat = GELIC_WL_ASSOC_STAT_DISCONN; | 
|  |  | 
|  | memset(&wl->iwstat, 0, sizeof(wl->iwstat)); | 
|  | /* all status bit clear */ | 
|  | wl->stat = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Tell eurus to terminate association | 
|  | */ | 
|  | static void gelic_wl_disconnect(struct net_device *netdev) | 
|  | { | 
|  | struct gelic_port *port = netdev_priv(netdev); | 
|  | struct gelic_wl_info *wl = port_wl(port); | 
|  | struct gelic_eurus_cmd *cmd; | 
|  |  | 
|  | /* | 
|  | * If scann process is running on chip, | 
|  | * further requests will be rejected | 
|  | */ | 
|  | if (wl->scan_stat == GELIC_WL_SCAN_STAT_SCANNING) | 
|  | wait_for_completion_timeout(&wl->scan_done, HZ); | 
|  |  | 
|  | cmd = gelic_eurus_sync_cmd(wl, GELIC_EURUS_CMD_DISASSOC, NULL, 0); | 
|  | kfree(cmd); | 
|  | gelic_wl_send_iwap_event(wl, NULL); | 
|  | }; | 
|  |  | 
|  | static int gelic_wl_stop(struct net_device *netdev) | 
|  | { | 
|  | struct gelic_port *port = netdev_priv(netdev); | 
|  | struct gelic_wl_info *wl = port_wl(port); | 
|  | struct gelic_card *card = netdev_card(netdev); | 
|  |  | 
|  | pr_debug("%s:<-\n", __func__); | 
|  |  | 
|  | /* | 
|  | * Cancel pending association work. | 
|  | * event work can run after netdev down | 
|  | */ | 
|  | cancel_delayed_work(&wl->assoc_work); | 
|  |  | 
|  | if (wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED) | 
|  | gelic_wl_disconnect(netdev); | 
|  |  | 
|  | /* reset our state machine */ | 
|  | gelic_wl_reset_state(wl); | 
|  |  | 
|  | netif_stop_queue(netdev); | 
|  |  | 
|  | gelic_card_down(card); | 
|  |  | 
|  | pr_debug("%s:->\n", __func__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* -- */ | 
|  |  | 
|  | static const struct net_device_ops gelic_wl_netdevice_ops = { | 
|  | .ndo_open = gelic_wl_open, | 
|  | .ndo_stop = gelic_wl_stop, | 
|  | .ndo_start_xmit = gelic_net_xmit, | 
|  | .ndo_set_multicast_list = gelic_net_set_multi, | 
|  | .ndo_change_mtu = gelic_net_change_mtu, | 
|  | .ndo_tx_timeout = gelic_net_tx_timeout, | 
|  | .ndo_set_mac_address = eth_mac_addr, | 
|  | .ndo_validate_addr = eth_validate_addr, | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | .ndo_poll_controller = gelic_net_poll_controller, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static const struct ethtool_ops gelic_wl_ethtool_ops = { | 
|  | .get_drvinfo	= gelic_net_get_drvinfo, | 
|  | .get_link	= gelic_wl_get_link, | 
|  | .get_tx_csum	= ethtool_op_get_tx_csum, | 
|  | .set_tx_csum	= ethtool_op_set_tx_csum, | 
|  | .get_rx_csum	= gelic_net_get_rx_csum, | 
|  | .set_rx_csum	= gelic_net_set_rx_csum, | 
|  | }; | 
|  |  | 
|  | static void __devinit gelic_wl_setup_netdev_ops(struct net_device *netdev) | 
|  | { | 
|  | struct gelic_wl_info *wl; | 
|  | wl = port_wl(netdev_priv(netdev)); | 
|  | BUG_ON(!wl); | 
|  | netdev->watchdog_timeo = GELIC_NET_WATCHDOG_TIMEOUT; | 
|  |  | 
|  | netdev->ethtool_ops = &gelic_wl_ethtool_ops; | 
|  | netdev->netdev_ops = &gelic_wl_netdevice_ops; | 
|  | netdev->wireless_data = &wl->wireless_data; | 
|  | netdev->wireless_handlers = &gelic_wl_wext_handler_def; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * driver probe/remove | 
|  | */ | 
|  | int __devinit gelic_wl_driver_probe(struct gelic_card *card) | 
|  | { | 
|  | int ret; | 
|  | struct net_device *netdev; | 
|  |  | 
|  | pr_debug("%s:start\n", __func__); | 
|  |  | 
|  | if (ps3_compare_firmware_version(1, 6, 0) < 0) | 
|  | return 0; | 
|  | if (!card->vlan[GELIC_PORT_WIRELESS].tx) | 
|  | return 0; | 
|  |  | 
|  | /* alloc netdevice for wireless */ | 
|  | netdev = gelic_wl_alloc(card); | 
|  | if (!netdev) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* setup net_device structure */ | 
|  | SET_NETDEV_DEV(netdev, &card->dev->core); | 
|  | gelic_wl_setup_netdev_ops(netdev); | 
|  |  | 
|  | /* setup some of net_device and register it */ | 
|  | ret = gelic_net_setup_netdev(netdev, card); | 
|  | if (ret) | 
|  | goto fail_setup; | 
|  | card->netdev[GELIC_PORT_WIRELESS] = netdev; | 
|  |  | 
|  | /* add enable wireless interrupt */ | 
|  | card->irq_mask |= GELIC_CARD_WLAN_EVENT_RECEIVED | | 
|  | GELIC_CARD_WLAN_COMMAND_COMPLETED; | 
|  | /* to allow wireless commands while both interfaces are down */ | 
|  | gelic_card_set_irq_mask(card, GELIC_CARD_WLAN_EVENT_RECEIVED | | 
|  | GELIC_CARD_WLAN_COMMAND_COMPLETED); | 
|  | pr_debug("%s:end\n", __func__); | 
|  | return 0; | 
|  |  | 
|  | fail_setup: | 
|  | gelic_wl_free(port_wl(netdev_port(netdev))); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int gelic_wl_driver_remove(struct gelic_card *card) | 
|  | { | 
|  | struct gelic_wl_info *wl; | 
|  | struct net_device *netdev; | 
|  |  | 
|  | pr_debug("%s:start\n", __func__); | 
|  |  | 
|  | if (ps3_compare_firmware_version(1, 6, 0) < 0) | 
|  | return 0; | 
|  | if (!card->vlan[GELIC_PORT_WIRELESS].tx) | 
|  | return 0; | 
|  |  | 
|  | netdev = card->netdev[GELIC_PORT_WIRELESS]; | 
|  | wl = port_wl(netdev_priv(netdev)); | 
|  |  | 
|  | /* if the interface was not up, but associated */ | 
|  | if (wl->assoc_stat == GELIC_WL_ASSOC_STAT_ASSOCIATED) | 
|  | gelic_wl_disconnect(netdev); | 
|  |  | 
|  | complete(&wl->cmd_done_intr); | 
|  |  | 
|  | /* cancel all work queue */ | 
|  | cancel_delayed_work(&wl->assoc_work); | 
|  | cancel_delayed_work(&wl->event_work); | 
|  | flush_workqueue(wl->eurus_cmd_queue); | 
|  | flush_workqueue(wl->event_queue); | 
|  |  | 
|  | unregister_netdev(netdev); | 
|  |  | 
|  | /* disable wireless interrupt */ | 
|  | pr_debug("%s: disable intr\n", __func__); | 
|  | card->irq_mask &= ~(GELIC_CARD_WLAN_EVENT_RECEIVED | | 
|  | GELIC_CARD_WLAN_COMMAND_COMPLETED); | 
|  | /* free bss list, netdev*/ | 
|  | gelic_wl_free(wl); | 
|  | pr_debug("%s:end\n", __func__); | 
|  | return 0; | 
|  | } |