| # |
| # PMBus chip drivers configuration |
| # |
| |
| menuconfig PMBUS |
| tristate "PMBus support" |
| depends on I2C |
| help |
| Say yes here if you want to enable PMBus support. |
| |
| This driver can also be built as a module. If so, the module will |
| be called pmbus_core. |
| |
| if PMBUS |
| |
| config SENSORS_PMBUS |
| tristate "Generic PMBus devices" |
| default y |
| help |
| If you say yes here you get hardware monitoring support for generic |
| PMBus devices, including but not limited to ADP4000, BMR453, BMR454, |
| MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, TPS40400, TPS544B20, |
| TPS544B25, TPS544C20, TPS544C25, and UDT020. |
| |
| This driver can also be built as a module. If so, the module will |
| be called pmbus. |
| |
| config SENSORS_ADM1275 |
| tristate "Analog Devices ADM1275 and compatibles" |
| help |
| If you say yes here you get hardware monitoring support for Analog |
| Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293, |
| and ADM1294 Hot-Swap Controller and Digital Power Monitors. |
| |
| This driver can also be built as a module. If so, the module will |
| be called adm1275. |
| |
| config SENSORS_IBM_CFFPS |
| tristate "IBM Common Form Factor Power Supply" |
| depends on LEDS_CLASS |
| help |
| If you say yes here you get hardware monitoring support for the IBM |
| Common Form Factor power supply. |
| |
| This driver can also be built as a module. If so, the module will |
| be called ibm-cffps. |
| |
| config SENSORS_IR35221 |
| tristate "Infineon IR35221" |
| help |
| If you say yes here you get hardware monitoring support for the |
| Infineon IR35221 controller. |
| |
| This driver can also be built as a module. If so, the module will |
| be called ir35521. |
| |
| config SENSORS_LM25066 |
| tristate "National Semiconductor LM25066 and compatibles" |
| help |
| If you say yes here you get hardware monitoring support for National |
| Semiconductor LM25056, LM25066, LM5064, and LM5066. |
| |
| This driver can also be built as a module. If so, the module will |
| be called lm25066. |
| |
| config SENSORS_LTC2978 |
| tristate "Linear Technologies LTC2978 and compatibles" |
| help |
| If you say yes here you get hardware monitoring support for Linear |
| Technology LTC2974, LTC2975, LTC2977, LTC2978, LTC2980, LTC3880, |
| LTC3883, LTC3886, LTC3887, LTCM2987, LTM4675, and LTM4676. |
| |
| This driver can also be built as a module. If so, the module will |
| be called ltc2978. |
| |
| config SENSORS_LTC2978_REGULATOR |
| bool "Regulator support for LTC2978 and compatibles" |
| depends on SENSORS_LTC2978 && REGULATOR |
| help |
| If you say yes here you get regulator support for Linear |
| Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, LTM4676 |
| and LTM4686. |
| |
| config SENSORS_LTC3815 |
| tristate "Linear Technologies LTC3815" |
| help |
| If you say yes here you get hardware monitoring support for Linear |
| Technology LTC3815. |
| |
| This driver can also be built as a module. If so, the module will |
| be called ltc3815. |
| |
| config SENSORS_MAX16064 |
| tristate "Maxim MAX16064" |
| help |
| If you say yes here you get hardware monitoring support for Maxim |
| MAX16064. |
| |
| This driver can also be built as a module. If so, the module will |
| be called max16064. |
| |
| config SENSORS_MAX20751 |
| tristate "Maxim MAX20751" |
| help |
| If you say yes here you get hardware monitoring support for Maxim |
| MAX20751. |
| |
| This driver can also be built as a module. If so, the module will |
| be called max20751. |
| |
| config SENSORS_MAX31785 |
| tristate "Maxim MAX31785 and compatibles" |
| help |
| If you say yes here you get hardware monitoring support for Maxim |
| MAX31785. |
| |
| This driver can also be built as a module. If so, the module will |
| be called max31785. |
| |
| config SENSORS_MAX34440 |
| tristate "Maxim MAX34440 and compatibles" |
| help |
| If you say yes here you get hardware monitoring support for Maxim |
| MAX34440, MAX34441, MAX34446, MAX34451, MAX34460, and MAX34461. |
| |
| This driver can also be built as a module. If so, the module will |
| be called max34440. |
| |
| config SENSORS_MAX8688 |
| tristate "Maxim MAX8688" |
| help |
| If you say yes here you get hardware monitoring support for Maxim |
| MAX8688. |
| |
| This driver can also be built as a module. If so, the module will |
| be called max8688. |
| |
| config SENSORS_TPS40422 |
| tristate "TI TPS40422" |
| help |
| If you say yes here you get hardware monitoring support for TI |
| TPS40422. |
| |
| This driver can also be built as a module. If so, the module will |
| be called tps40422. |
| |
| config SENSORS_TPS53679 |
| tristate "TI TPS53679" |
| help |
| If you say yes here you get hardware monitoring support for TI |
| TPS53679. |
| |
| This driver can also be built as a module. If so, the module will |
| be called tps53679. |
| |
| config SENSORS_UCD9000 |
| tristate "TI UCD90120, UCD90124, UCD90160, UCD9090, UCD90910" |
| help |
| If you say yes here you get hardware monitoring support for TI |
| UCD90120, UCD90124, UCD90160, UCD9090, UCD90910, Sequencer and System |
| Health Controllers. |
| |
| This driver can also be built as a module. If so, the module will |
| be called ucd9000. |
| |
| config SENSORS_UCD9200 |
| tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248" |
| help |
| If you say yes here you get hardware monitoring support for TI |
| UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248 |
| Digital PWM System Controllers. |
| |
| This driver can also be built as a module. If so, the module will |
| be called ucd9200. |
| |
| config SENSORS_ZL6100 |
| tristate "Intersil ZL6100 and compatibles" |
| help |
| If you say yes here you get hardware monitoring support for Intersil |
| ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105, |
| ZL9101M, and ZL9117M Digital DC/DC Controllers, as well as for |
| Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464. |
| |
| This driver can also be built as a module. If so, the module will |
| be called zl6100. |
| |
| endif # PMBUS |
