|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * XLP2XX Device Tree Source for FVP boards | 
|  | */ | 
|  |  | 
|  | /dts-v1/; | 
|  | / { | 
|  | model = "netlogic,XLP-FVP"; | 
|  | compatible = "netlogic,xlp"; | 
|  | #address-cells = <2>; | 
|  | #size-cells = <2>; | 
|  |  | 
|  | soc { | 
|  | #address-cells = <2>; | 
|  | #size-cells = <1>; | 
|  | compatible = "simple-bus"; | 
|  | ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG | 
|  | 1 0  0 0x16000000  0x02000000>; // GBU chipselects | 
|  |  | 
|  | serial0: serial@30000 { | 
|  | device_type = "serial"; | 
|  | compatible = "ns16550"; | 
|  | reg = <0 0x30100 0xa00>; | 
|  | reg-shift = <2>; | 
|  | reg-io-width = <4>; | 
|  | clock-frequency = <133333333>; | 
|  | interrupt-parent = <&pic>; | 
|  | interrupts = <17>; | 
|  | }; | 
|  | serial1: serial@31000 { | 
|  | device_type = "serial"; | 
|  | compatible = "ns16550"; | 
|  | reg = <0 0x31100 0xa00>; | 
|  | reg-shift = <2>; | 
|  | reg-io-width = <4>; | 
|  | clock-frequency = <133333333>; | 
|  | interrupt-parent = <&pic>; | 
|  | interrupts = <18>; | 
|  | }; | 
|  | i2c0: ocores@37100 { | 
|  | compatible = "opencores,i2c-ocores"; | 
|  | #address-cells = <1>; | 
|  | #size-cells = <0>; | 
|  | reg = <0 0x37100 0x20>; | 
|  | reg-shift = <2>; | 
|  | reg-io-width = <4>; | 
|  | clock-frequency = <32000000>; | 
|  | interrupt-parent = <&pic>; | 
|  | interrupts = <30>; | 
|  | }; | 
|  | i2c1: ocores@37120 { | 
|  | compatible = "opencores,i2c-ocores"; | 
|  | #address-cells = <1>; | 
|  | #size-cells = <0>; | 
|  | reg = <0 0x37120 0x20>; | 
|  | reg-shift = <2>; | 
|  | reg-io-width = <4>; | 
|  | clock-frequency = <32000000>; | 
|  | interrupt-parent = <&pic>; | 
|  | interrupts = <31>; | 
|  |  | 
|  | rtc@68 { | 
|  | compatible = "dallas,ds1374"; | 
|  | reg = <0x68>; | 
|  | }; | 
|  |  | 
|  | dtt@4c { | 
|  | compatible = "national,lm90"; | 
|  | reg = <0x4c>; | 
|  | }; | 
|  | }; | 
|  | pic: pic@4000 { | 
|  | compatible = "netlogic,xlp-pic"; | 
|  | #address-cells = <0>; | 
|  | #interrupt-cells = <1>; | 
|  | reg = <0 0x4000 0x200>; | 
|  | interrupt-controller; | 
|  | }; | 
|  |  | 
|  | nor_flash@1,0 { | 
|  | compatible = "cfi-flash"; | 
|  | #address-cells = <1>; | 
|  | #size-cells = <1>; | 
|  | bank-width = <2>; | 
|  | reg = <1 0 0x1000000>; | 
|  |  | 
|  | partition@0 { | 
|  | label = "x-loader"; | 
|  | reg = <0x0 0x100000>; /* 1M */ | 
|  | read-only; | 
|  | }; | 
|  |  | 
|  | partition@100000 { | 
|  | label = "u-boot"; | 
|  | reg = <0x100000 0x100000>; /* 1M */ | 
|  | }; | 
|  |  | 
|  | partition@200000 { | 
|  | label = "kernel"; | 
|  | reg = <0x200000 0x500000>; /* 5M */ | 
|  | }; | 
|  |  | 
|  | partition@700000 { | 
|  | label = "rootfs"; | 
|  | reg = <0x700000 0x800000>; /* 8M */ | 
|  | }; | 
|  |  | 
|  | partition@f00000 { | 
|  | label = "env"; | 
|  | reg = <0xf00000 0x100000>; /* 1M */ | 
|  | read-only; | 
|  | }; | 
|  | }; | 
|  |  | 
|  | gpio: xlp_gpio@34100 { | 
|  | compatible = "netlogic,xlp208-gpio"; | 
|  | reg = <0 0x34100 0x1000>; | 
|  | #gpio-cells = <2>; | 
|  | gpio-controller; | 
|  |  | 
|  | #interrupt-cells = <2>; | 
|  | interrupt-parent = <&pic>; | 
|  | interrupts = <39>; | 
|  | interrupt-controller; | 
|  | }; | 
|  | }; | 
|  |  | 
|  | chosen { | 
|  | bootargs = "console=ttyS0,115200 rdinit=/sbin/init"; | 
|  | }; | 
|  | }; |