| /* | 
 |  * twl6030-irq.c - TWL6030 irq support | 
 |  * | 
 |  * Copyright (C) 2005-2009 Texas Instruments, Inc. | 
 |  * | 
 |  * Modifications to defer interrupt handling to a kernel thread: | 
 |  * Copyright (C) 2006 MontaVista Software, Inc. | 
 |  * | 
 |  * Based on tlv320aic23.c: | 
 |  * Copyright (c) by Kai Svahn <kai.svahn@nokia.com> | 
 |  * | 
 |  * Code cleanup and modifications to IRQ handler. | 
 |  * by syed khasim <x0khasim@ti.com> | 
 |  * | 
 |  * TWL6030 specific code and IRQ handling changes by | 
 |  * Jagadeesh Bhaskar Pakaravoor <j-pakaravoor@ti.com> | 
 |  * Balaji T K <balajitk@ti.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA | 
 |  */ | 
 |  | 
 | #include <linux/export.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/irq.h> | 
 | #include <linux/kthread.h> | 
 | #include <linux/i2c/twl.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/suspend.h> | 
 | #include <linux/of.h> | 
 | #include <linux/irqdomain.h> | 
 | #include <linux/of_device.h> | 
 |  | 
 | #include "twl-core.h" | 
 |  | 
 | /* | 
 |  * TWL6030 (unlike its predecessors, which had two level interrupt handling) | 
 |  * three interrupt registers INT_STS_A, INT_STS_B and INT_STS_C. | 
 |  * It exposes status bits saying who has raised an interrupt. There are | 
 |  * three mask registers that corresponds to these status registers, that | 
 |  * enables/disables these interrupts. | 
 |  * | 
 |  * We set up IRQs starting at a platform-specified base. An interrupt map table, | 
 |  * specifies mapping between interrupt number and the associated module. | 
 |  */ | 
 | #define TWL6030_NR_IRQS    20 | 
 |  | 
 | static int twl6030_interrupt_mapping[24] = { | 
 | 	PWR_INTR_OFFSET,	/* Bit 0	PWRON			*/ | 
 | 	PWR_INTR_OFFSET,	/* Bit 1	RPWRON			*/ | 
 | 	PWR_INTR_OFFSET,	/* Bit 2	BAT_VLOW		*/ | 
 | 	RTC_INTR_OFFSET,	/* Bit 3	RTC_ALARM		*/ | 
 | 	RTC_INTR_OFFSET,	/* Bit 4	RTC_PERIOD		*/ | 
 | 	HOTDIE_INTR_OFFSET,	/* Bit 5	HOT_DIE			*/ | 
 | 	SMPSLDO_INTR_OFFSET,	/* Bit 6	VXXX_SHORT		*/ | 
 | 	SMPSLDO_INTR_OFFSET,	/* Bit 7	VMMC_SHORT		*/ | 
 |  | 
 | 	SMPSLDO_INTR_OFFSET,	/* Bit 8	VUSIM_SHORT		*/ | 
 | 	BATDETECT_INTR_OFFSET,	/* Bit 9	BAT			*/ | 
 | 	SIMDETECT_INTR_OFFSET,	/* Bit 10	SIM			*/ | 
 | 	MMCDETECT_INTR_OFFSET,	/* Bit 11	MMC			*/ | 
 | 	RSV_INTR_OFFSET,	/* Bit 12	Reserved		*/ | 
 | 	MADC_INTR_OFFSET,	/* Bit 13	GPADC_RT_EOC		*/ | 
 | 	MADC_INTR_OFFSET,	/* Bit 14	GPADC_SW_EOC		*/ | 
 | 	GASGAUGE_INTR_OFFSET,	/* Bit 15	CC_AUTOCAL		*/ | 
 |  | 
 | 	USBOTG_INTR_OFFSET,	/* Bit 16	ID_WKUP			*/ | 
 | 	USBOTG_INTR_OFFSET,	/* Bit 17	VBUS_WKUP		*/ | 
 | 	USBOTG_INTR_OFFSET,	/* Bit 18	ID			*/ | 
 | 	USB_PRES_INTR_OFFSET,	/* Bit 19	VBUS			*/ | 
 | 	CHARGER_INTR_OFFSET,	/* Bit 20	CHRG_CTRL		*/ | 
 | 	CHARGERFAULT_INTR_OFFSET,	/* Bit 21	EXT_CHRG	*/ | 
 | 	CHARGERFAULT_INTR_OFFSET,	/* Bit 22	INT_CHRG	*/ | 
 | 	RSV_INTR_OFFSET,	/* Bit 23	Reserved		*/ | 
 | }; | 
 |  | 
 | static int twl6032_interrupt_mapping[24] = { | 
 | 	PWR_INTR_OFFSET,	/* Bit 0	PWRON			*/ | 
 | 	PWR_INTR_OFFSET,	/* Bit 1	RPWRON			*/ | 
 | 	PWR_INTR_OFFSET,	/* Bit 2	SYS_VLOW		*/ | 
 | 	RTC_INTR_OFFSET,	/* Bit 3	RTC_ALARM		*/ | 
 | 	RTC_INTR_OFFSET,	/* Bit 4	RTC_PERIOD		*/ | 
 | 	HOTDIE_INTR_OFFSET,	/* Bit 5	HOT_DIE			*/ | 
 | 	SMPSLDO_INTR_OFFSET,	/* Bit 6	VXXX_SHORT		*/ | 
 | 	PWR_INTR_OFFSET,	/* Bit 7	SPDURATION		*/ | 
 |  | 
 | 	PWR_INTR_OFFSET,	/* Bit 8	WATCHDOG		*/ | 
 | 	BATDETECT_INTR_OFFSET,	/* Bit 9	BAT			*/ | 
 | 	SIMDETECT_INTR_OFFSET,	/* Bit 10	SIM			*/ | 
 | 	MMCDETECT_INTR_OFFSET,	/* Bit 11	MMC			*/ | 
 | 	MADC_INTR_OFFSET,	/* Bit 12	GPADC_RT_EOC		*/ | 
 | 	MADC_INTR_OFFSET,	/* Bit 13	GPADC_SW_EOC		*/ | 
 | 	GASGAUGE_INTR_OFFSET,	/* Bit 14	CC_EOC			*/ | 
 | 	GASGAUGE_INTR_OFFSET,	/* Bit 15	CC_AUTOCAL		*/ | 
 |  | 
 | 	USBOTG_INTR_OFFSET,	/* Bit 16	ID_WKUP			*/ | 
 | 	USBOTG_INTR_OFFSET,	/* Bit 17	VBUS_WKUP		*/ | 
 | 	USBOTG_INTR_OFFSET,	/* Bit 18	ID			*/ | 
 | 	USB_PRES_INTR_OFFSET,	/* Bit 19	VBUS			*/ | 
 | 	CHARGER_INTR_OFFSET,	/* Bit 20	CHRG_CTRL		*/ | 
 | 	CHARGERFAULT_INTR_OFFSET,	/* Bit 21	EXT_CHRG	*/ | 
 | 	CHARGERFAULT_INTR_OFFSET,	/* Bit 22	INT_CHRG	*/ | 
 | 	RSV_INTR_OFFSET,	/* Bit 23	Reserved		*/ | 
 | }; | 
 |  | 
 | /*----------------------------------------------------------------------*/ | 
 |  | 
 | struct twl6030_irq { | 
 | 	unsigned int		irq_base; | 
 | 	int			twl_irq; | 
 | 	bool			irq_wake_enabled; | 
 | 	atomic_t		wakeirqs; | 
 | 	struct notifier_block	pm_nb; | 
 | 	struct irq_chip		irq_chip; | 
 | 	struct irq_domain	*irq_domain; | 
 | 	const int		*irq_mapping_tbl; | 
 | }; | 
 |  | 
 | static struct twl6030_irq *twl6030_irq; | 
 |  | 
 | static int twl6030_irq_pm_notifier(struct notifier_block *notifier, | 
 | 				   unsigned long pm_event, void *unused) | 
 | { | 
 | 	int chained_wakeups; | 
 | 	struct twl6030_irq *pdata = container_of(notifier, struct twl6030_irq, | 
 | 						  pm_nb); | 
 |  | 
 | 	switch (pm_event) { | 
 | 	case PM_SUSPEND_PREPARE: | 
 | 		chained_wakeups = atomic_read(&pdata->wakeirqs); | 
 |  | 
 | 		if (chained_wakeups && !pdata->irq_wake_enabled) { | 
 | 			if (enable_irq_wake(pdata->twl_irq)) | 
 | 				pr_err("twl6030 IRQ wake enable failed\n"); | 
 | 			else | 
 | 				pdata->irq_wake_enabled = true; | 
 | 		} else if (!chained_wakeups && pdata->irq_wake_enabled) { | 
 | 			disable_irq_wake(pdata->twl_irq); | 
 | 			pdata->irq_wake_enabled = false; | 
 | 		} | 
 |  | 
 | 		disable_irq(pdata->twl_irq); | 
 | 		break; | 
 |  | 
 | 	case PM_POST_SUSPEND: | 
 | 		enable_irq(pdata->twl_irq); | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return NOTIFY_DONE; | 
 | } | 
 |  | 
 | /* | 
 | * Threaded irq handler for the twl6030 interrupt. | 
 | * We query the interrupt controller in the twl6030 to determine | 
 | * which module is generating the interrupt request and call | 
 | * handle_nested_irq for that module. | 
 | */ | 
 | static irqreturn_t twl6030_irq_thread(int irq, void *data) | 
 | { | 
 | 	int i, ret; | 
 | 	union { | 
 | 		u8 bytes[4]; | 
 | 		__le32 int_sts; | 
 | 	} sts; | 
 | 	u32 int_sts; /* sts.int_sts converted to CPU endianness */ | 
 | 	struct twl6030_irq *pdata = data; | 
 |  | 
 | 	/* read INT_STS_A, B and C in one shot using a burst read */ | 
 | 	ret = twl_i2c_read(TWL_MODULE_PIH, sts.bytes, REG_INT_STS_A, 3); | 
 | 	if (ret) { | 
 | 		pr_warn("twl6030_irq: I2C error %d reading PIH ISR\n", ret); | 
 | 		return IRQ_HANDLED; | 
 | 	} | 
 |  | 
 | 	sts.bytes[3] = 0; /* Only 24 bits are valid*/ | 
 |  | 
 | 	/* | 
 | 	 * Since VBUS status bit is not reliable for VBUS disconnect | 
 | 	 * use CHARGER VBUS detection status bit instead. | 
 | 	 */ | 
 | 	if (sts.bytes[2] & 0x10) | 
 | 		sts.bytes[2] |= 0x08; | 
 |  | 
 | 	int_sts = le32_to_cpu(sts.int_sts); | 
 | 	for (i = 0; int_sts; int_sts >>= 1, i++) | 
 | 		if (int_sts & 0x1) { | 
 | 			int module_irq = | 
 | 				irq_find_mapping(pdata->irq_domain, | 
 | 						 pdata->irq_mapping_tbl[i]); | 
 | 			if (module_irq) | 
 | 				handle_nested_irq(module_irq); | 
 | 			else | 
 | 				pr_err("twl6030_irq: Unmapped PIH ISR %u detected\n", | 
 | 				       i); | 
 | 			pr_debug("twl6030_irq: PIH ISR %u, virq%u\n", | 
 | 				 i, module_irq); | 
 | 		} | 
 |  | 
 | 	/* | 
 | 	 * NOTE: | 
 | 	 * Simulation confirms that documentation is wrong w.r.t the | 
 | 	 * interrupt status clear operation. A single *byte* write to | 
 | 	 * any one of STS_A to STS_C register results in all three | 
 | 	 * STS registers being reset. Since it does not matter which | 
 | 	 * value is written, all three registers are cleared on a | 
 | 	 * single byte write, so we just use 0x0 to clear. | 
 | 	 */ | 
 | 	ret = twl_i2c_write_u8(TWL_MODULE_PIH, 0x00, REG_INT_STS_A); | 
 | 	if (ret) | 
 | 		pr_warn("twl6030_irq: I2C error in clearing PIH ISR\n"); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------*/ | 
 |  | 
 | static int twl6030_irq_set_wake(struct irq_data *d, unsigned int on) | 
 | { | 
 | 	struct twl6030_irq *pdata = irq_data_get_irq_chip_data(d); | 
 |  | 
 | 	if (on) | 
 | 		atomic_inc(&pdata->wakeirqs); | 
 | 	else | 
 | 		atomic_dec(&pdata->wakeirqs); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int twl6030_interrupt_unmask(u8 bit_mask, u8 offset) | 
 | { | 
 | 	int ret; | 
 | 	u8 unmask_value; | 
 |  | 
 | 	ret = twl_i2c_read_u8(TWL_MODULE_PIH, &unmask_value, | 
 | 			REG_INT_STS_A + offset); | 
 | 	unmask_value &= (~(bit_mask)); | 
 | 	ret |= twl_i2c_write_u8(TWL_MODULE_PIH, unmask_value, | 
 | 			REG_INT_STS_A + offset); /* unmask INT_MSK_A/B/C */ | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(twl6030_interrupt_unmask); | 
 |  | 
 | int twl6030_interrupt_mask(u8 bit_mask, u8 offset) | 
 | { | 
 | 	int ret; | 
 | 	u8 mask_value; | 
 |  | 
 | 	ret = twl_i2c_read_u8(TWL_MODULE_PIH, &mask_value, | 
 | 			REG_INT_STS_A + offset); | 
 | 	mask_value |= (bit_mask); | 
 | 	ret |= twl_i2c_write_u8(TWL_MODULE_PIH, mask_value, | 
 | 			REG_INT_STS_A + offset); /* mask INT_MSK_A/B/C */ | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(twl6030_interrupt_mask); | 
 |  | 
 | int twl6030_mmc_card_detect_config(void) | 
 | { | 
 | 	int ret; | 
 | 	u8 reg_val = 0; | 
 |  | 
 | 	/* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */ | 
 | 	twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK, | 
 | 						REG_INT_MSK_LINE_B); | 
 | 	twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK, | 
 | 						REG_INT_MSK_STS_B); | 
 | 	/* | 
 | 	 * Initially Configuring MMC_CTRL for receiving interrupts & | 
 | 	 * Card status on TWL6030 for MMC1 | 
 | 	 */ | 
 | 	ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, TWL6030_MMCCTRL); | 
 | 	if (ret < 0) { | 
 | 		pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 | 	reg_val &= ~VMMC_AUTO_OFF; | 
 | 	reg_val |= SW_FC; | 
 | 	ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL); | 
 | 	if (ret < 0) { | 
 | 		pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	/* Configuring PullUp-PullDown register */ | 
 | 	ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, | 
 | 						TWL6030_CFG_INPUT_PUPD3); | 
 | 	if (ret < 0) { | 
 | 		pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n", | 
 | 									ret); | 
 | 		return ret; | 
 | 	} | 
 | 	reg_val &= ~(MMC_PU | MMC_PD); | 
 | 	ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, | 
 | 						TWL6030_CFG_INPUT_PUPD3); | 
 | 	if (ret < 0) { | 
 | 		pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n", | 
 | 									ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return irq_find_mapping(twl6030_irq->irq_domain, | 
 | 				 MMCDETECT_INTR_OFFSET); | 
 | } | 
 | EXPORT_SYMBOL(twl6030_mmc_card_detect_config); | 
 |  | 
 | int twl6030_mmc_card_detect(struct device *dev, int slot) | 
 | { | 
 | 	int ret = -EIO; | 
 | 	u8 read_reg = 0; | 
 | 	struct platform_device *pdev = to_platform_device(dev); | 
 |  | 
 | 	if (pdev->id) { | 
 | 		/* TWL6030 provide's Card detect support for | 
 | 		 * only MMC1 controller. | 
 | 		 */ | 
 | 		pr_err("Unknown MMC controller %d in %s\n", pdev->id, __func__); | 
 | 		return ret; | 
 | 	} | 
 | 	/* | 
 | 	 * BIT0 of MMC_CTRL on TWL6030 provides card status for MMC1 | 
 | 	 * 0 - Card not present ,1 - Card present | 
 | 	 */ | 
 | 	ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg, | 
 | 						TWL6030_MMCCTRL); | 
 | 	if (ret >= 0) | 
 | 		ret = read_reg & STS_MMC; | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(twl6030_mmc_card_detect); | 
 |  | 
 | static int twl6030_irq_map(struct irq_domain *d, unsigned int virq, | 
 | 			      irq_hw_number_t hwirq) | 
 | { | 
 | 	struct twl6030_irq *pdata = d->host_data; | 
 |  | 
 | 	irq_set_chip_data(virq, pdata); | 
 | 	irq_set_chip_and_handler(virq,  &pdata->irq_chip, handle_simple_irq); | 
 | 	irq_set_nested_thread(virq, true); | 
 | 	irq_set_parent(virq, pdata->twl_irq); | 
 | 	irq_set_noprobe(virq); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void twl6030_irq_unmap(struct irq_domain *d, unsigned int virq) | 
 | { | 
 | 	irq_set_chip_and_handler(virq, NULL, NULL); | 
 | 	irq_set_chip_data(virq, NULL); | 
 | } | 
 |  | 
 | static const struct irq_domain_ops twl6030_irq_domain_ops = { | 
 | 	.map	= twl6030_irq_map, | 
 | 	.unmap	= twl6030_irq_unmap, | 
 | 	.xlate	= irq_domain_xlate_onetwocell, | 
 | }; | 
 |  | 
 | static const struct of_device_id twl6030_of_match[] = { | 
 | 	{.compatible = "ti,twl6030", &twl6030_interrupt_mapping}, | 
 | 	{.compatible = "ti,twl6032", &twl6032_interrupt_mapping}, | 
 | 	{ }, | 
 | }; | 
 |  | 
 | int twl6030_init_irq(struct device *dev, int irq_num) | 
 | { | 
 | 	struct			device_node *node = dev->of_node; | 
 | 	int			nr_irqs; | 
 | 	int			status; | 
 | 	u8			mask[3]; | 
 | 	const struct of_device_id *of_id; | 
 |  | 
 | 	of_id = of_match_device(twl6030_of_match, dev); | 
 | 	if (!of_id || !of_id->data) { | 
 | 		dev_err(dev, "Unknown TWL device model\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	nr_irqs = TWL6030_NR_IRQS; | 
 |  | 
 | 	twl6030_irq = devm_kzalloc(dev, sizeof(*twl6030_irq), GFP_KERNEL); | 
 | 	if (!twl6030_irq) { | 
 | 		dev_err(dev, "twl6030_irq: Memory allocation failed\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	mask[0] = 0xFF; | 
 | 	mask[1] = 0xFF; | 
 | 	mask[2] = 0xFF; | 
 |  | 
 | 	/* mask all int lines */ | 
 | 	status = twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_LINE_A, 3); | 
 | 	/* mask all int sts */ | 
 | 	status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_STS_A, 3); | 
 | 	/* clear INT_STS_A,B,C */ | 
 | 	status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_STS_A, 3); | 
 |  | 
 | 	if (status < 0) { | 
 | 		dev_err(dev, "I2C err writing TWL_MODULE_PIH: %d\n", status); | 
 | 		return status; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * install an irq handler for each of the modules; | 
 | 	 * clone dummy irq_chip since PIH can't *do* anything | 
 | 	 */ | 
 | 	twl6030_irq->irq_chip = dummy_irq_chip; | 
 | 	twl6030_irq->irq_chip.name = "twl6030"; | 
 | 	twl6030_irq->irq_chip.irq_set_type = NULL; | 
 | 	twl6030_irq->irq_chip.irq_set_wake = twl6030_irq_set_wake; | 
 |  | 
 | 	twl6030_irq->pm_nb.notifier_call = twl6030_irq_pm_notifier; | 
 | 	atomic_set(&twl6030_irq->wakeirqs, 0); | 
 | 	twl6030_irq->irq_mapping_tbl = of_id->data; | 
 |  | 
 | 	twl6030_irq->irq_domain = | 
 | 		irq_domain_add_linear(node, nr_irqs, | 
 | 				      &twl6030_irq_domain_ops, twl6030_irq); | 
 | 	if (!twl6030_irq->irq_domain) { | 
 | 		dev_err(dev, "Can't add irq_domain\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	dev_info(dev, "PIH (irq %d) nested IRQs\n", irq_num); | 
 |  | 
 | 	/* install an irq handler to demultiplex the TWL6030 interrupt */ | 
 | 	status = request_threaded_irq(irq_num, NULL, twl6030_irq_thread, | 
 | 				      IRQF_ONESHOT, "TWL6030-PIH", twl6030_irq); | 
 | 	if (status < 0) { | 
 | 		dev_err(dev, "could not claim irq %d: %d\n", irq_num, status); | 
 | 		goto fail_irq; | 
 | 	} | 
 |  | 
 | 	twl6030_irq->twl_irq = irq_num; | 
 | 	register_pm_notifier(&twl6030_irq->pm_nb); | 
 | 	return 0; | 
 |  | 
 | fail_irq: | 
 | 	irq_domain_remove(twl6030_irq->irq_domain); | 
 | 	return status; | 
 | } | 
 |  | 
 | int twl6030_exit_irq(void) | 
 | { | 
 | 	if (twl6030_irq && twl6030_irq->twl_irq) { | 
 | 		unregister_pm_notifier(&twl6030_irq->pm_nb); | 
 | 		free_irq(twl6030_irq->twl_irq, NULL); | 
 | 		/* | 
 | 		 * TODO: IRQ domain and allocated nested IRQ descriptors | 
 | 		 * should be freed somehow here. Now It can't be done, because | 
 | 		 * child devices will not be deleted during removing of | 
 | 		 * TWL Core driver and they will still contain allocated | 
 | 		 * virt IRQs in their Resources tables. | 
 | 		 * The same prevents us from using devm_request_threaded_irq() | 
 | 		 * in this module. | 
 | 		 */ | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  |