| // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) |
| // |
| // This file is provided under a dual BSD/GPLv2 license. When using or |
| // redistributing this file, you may do so under either license. |
| // |
| // Copyright(c) 2018 Intel Corporation. All rights reserved. |
| // |
| // Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> |
| // |
| // Generic firmware loader. |
| // |
| |
| #include <linux/firmware.h> |
| #include <sound/sof.h> |
| #include "ops.h" |
| |
| static int get_ext_windows(struct snd_sof_dev *sdev, |
| struct sof_ipc_ext_data_hdr *ext_hdr) |
| { |
| struct sof_ipc_window *w = |
| container_of(ext_hdr, struct sof_ipc_window, ext_hdr); |
| |
| if (w->num_windows == 0 || w->num_windows > SOF_IPC_MAX_ELEMS) |
| return -EINVAL; |
| |
| /* keep a local copy of the data */ |
| sdev->info_window = kmemdup(w, struct_size(w, window, w->num_windows), |
| GFP_KERNEL); |
| if (!sdev->info_window) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| /* parse the extended FW boot data structures from FW boot message */ |
| int snd_sof_fw_parse_ext_data(struct snd_sof_dev *sdev, u32 bar, u32 offset) |
| { |
| struct sof_ipc_ext_data_hdr *ext_hdr; |
| void *ext_data; |
| int ret = 0; |
| |
| ext_data = kzalloc(PAGE_SIZE, GFP_KERNEL); |
| if (!ext_data) |
| return -ENOMEM; |
| |
| /* get first header */ |
| snd_sof_dsp_block_read(sdev, bar, offset, ext_data, |
| sizeof(*ext_hdr)); |
| ext_hdr = ext_data; |
| |
| while (ext_hdr->hdr.cmd == SOF_IPC_FW_READY) { |
| /* read in ext structure */ |
| offset += sizeof(*ext_hdr); |
| snd_sof_dsp_block_read(sdev, bar, offset, |
| (void *)((u8 *)ext_data + sizeof(*ext_hdr)), |
| ext_hdr->hdr.size - sizeof(*ext_hdr)); |
| |
| dev_dbg(sdev->dev, "found ext header type %d size 0x%x\n", |
| ext_hdr->type, ext_hdr->hdr.size); |
| |
| /* process structure data */ |
| switch (ext_hdr->type) { |
| case SOF_IPC_EXT_DMA_BUFFER: |
| break; |
| case SOF_IPC_EXT_WINDOW: |
| ret = get_ext_windows(sdev, ext_hdr); |
| break; |
| default: |
| break; |
| } |
| |
| if (ret < 0) { |
| dev_err(sdev->dev, "error: failed to parse ext data type %d\n", |
| ext_hdr->type); |
| break; |
| } |
| |
| /* move to next header */ |
| offset += ext_hdr->hdr.size; |
| snd_sof_dsp_block_read(sdev, bar, offset, ext_data, |
| sizeof(*ext_hdr)); |
| ext_hdr = ext_data; |
| } |
| |
| kfree(ext_data); |
| return ret; |
| } |
| EXPORT_SYMBOL(snd_sof_fw_parse_ext_data); |
| |
| /* generic module parser for mmaped DSPs */ |
| int snd_sof_parse_module_memcpy(struct snd_sof_dev *sdev, |
| struct snd_sof_mod_hdr *module) |
| { |
| struct snd_sof_blk_hdr *block; |
| int count; |
| u32 offset; |
| size_t remaining; |
| |
| dev_dbg(sdev->dev, "new module size 0x%x blocks 0x%x type 0x%x\n", |
| module->size, module->num_blocks, module->type); |
| |
| block = (struct snd_sof_blk_hdr *)((u8 *)module + sizeof(*module)); |
| |
| /* module->size doesn't include header size */ |
| remaining = module->size; |
| for (count = 0; count < module->num_blocks; count++) { |
| /* check for wrap */ |
| if (remaining < sizeof(*block)) { |
| dev_err(sdev->dev, "error: not enough data remaining\n"); |
| return -EINVAL; |
| } |
| |
| /* minus header size of block */ |
| remaining -= sizeof(*block); |
| |
| if (block->size == 0) { |
| dev_warn(sdev->dev, |
| "warning: block %d size zero\n", count); |
| dev_warn(sdev->dev, " type 0x%x offset 0x%x\n", |
| block->type, block->offset); |
| continue; |
| } |
| |
| switch (block->type) { |
| case SOF_FW_BLK_TYPE_RSRVD0: |
| case SOF_FW_BLK_TYPE_SRAM...SOF_FW_BLK_TYPE_RSRVD14: |
| continue; /* not handled atm */ |
| case SOF_FW_BLK_TYPE_IRAM: |
| case SOF_FW_BLK_TYPE_DRAM: |
| offset = block->offset; |
| break; |
| default: |
| dev_err(sdev->dev, "error: bad type 0x%x for block 0x%x\n", |
| block->type, count); |
| return -EINVAL; |
| } |
| |
| dev_dbg(sdev->dev, |
| "block %d type 0x%x size 0x%x ==> offset 0x%x\n", |
| count, block->type, block->size, offset); |
| |
| /* checking block->size to avoid unaligned access */ |
| if (block->size % sizeof(u32)) { |
| dev_err(sdev->dev, "error: invalid block size 0x%x\n", |
| block->size); |
| return -EINVAL; |
| } |
| snd_sof_dsp_block_write(sdev, sdev->mmio_bar, offset, |
| block + 1, block->size); |
| |
| if (remaining < block->size) { |
| dev_err(sdev->dev, "error: not enough data remaining\n"); |
| return -EINVAL; |
| } |
| |
| /* minus body size of block */ |
| remaining -= block->size; |
| /* next block */ |
| block = (struct snd_sof_blk_hdr *)((u8 *)block + sizeof(*block) |
| + block->size); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(snd_sof_parse_module_memcpy); |
| |
| static int check_header(struct snd_sof_dev *sdev, const struct firmware *fw) |
| { |
| struct snd_sof_fw_header *header; |
| |
| /* Read the header information from the data pointer */ |
| header = (struct snd_sof_fw_header *)fw->data; |
| |
| /* verify FW sig */ |
| if (strncmp(header->sig, SND_SOF_FW_SIG, SND_SOF_FW_SIG_SIZE) != 0) { |
| dev_err(sdev->dev, "error: invalid firmware signature\n"); |
| return -EINVAL; |
| } |
| |
| /* check size is valid */ |
| if (fw->size != header->file_size + sizeof(*header)) { |
| dev_err(sdev->dev, "error: invalid filesize mismatch got 0x%zx expected 0x%zx\n", |
| fw->size, header->file_size + sizeof(*header)); |
| return -EINVAL; |
| } |
| |
| dev_dbg(sdev->dev, "header size=0x%x modules=0x%x abi=0x%x size=%zu\n", |
| header->file_size, header->num_modules, |
| header->abi, sizeof(*header)); |
| |
| return 0; |
| } |
| |
| static int load_modules(struct snd_sof_dev *sdev, const struct firmware *fw) |
| { |
| struct snd_sof_fw_header *header; |
| struct snd_sof_mod_hdr *module; |
| int (*load_module)(struct snd_sof_dev *sof_dev, |
| struct snd_sof_mod_hdr *hdr); |
| int ret, count; |
| size_t remaining; |
| |
| header = (struct snd_sof_fw_header *)fw->data; |
| load_module = sof_ops(sdev)->load_module; |
| if (!load_module) |
| return -EINVAL; |
| |
| /* parse each module */ |
| module = (struct snd_sof_mod_hdr *)((u8 *)(fw->data) + sizeof(*header)); |
| remaining = fw->size - sizeof(*header); |
| /* check for wrap */ |
| if (remaining > fw->size) { |
| dev_err(sdev->dev, "error: fw size smaller than header size\n"); |
| return -EINVAL; |
| } |
| |
| for (count = 0; count < header->num_modules; count++) { |
| /* check for wrap */ |
| if (remaining < sizeof(*module)) { |
| dev_err(sdev->dev, "error: not enough data remaining\n"); |
| return -EINVAL; |
| } |
| |
| /* minus header size of module */ |
| remaining -= sizeof(*module); |
| |
| /* module */ |
| ret = load_module(sdev, module); |
| if (ret < 0) { |
| dev_err(sdev->dev, "error: invalid module %d\n", count); |
| return ret; |
| } |
| |
| if (remaining < module->size) { |
| dev_err(sdev->dev, "error: not enough data remaining\n"); |
| return -EINVAL; |
| } |
| |
| /* minus body size of module */ |
| remaining -= module->size; |
| module = (struct snd_sof_mod_hdr *)((u8 *)module |
| + sizeof(*module) + module->size); |
| } |
| |
| return 0; |
| } |
| |
| int snd_sof_load_firmware_raw(struct snd_sof_dev *sdev) |
| { |
| struct snd_sof_pdata *plat_data = sdev->pdata; |
| const char *fw_filename; |
| int ret; |
| |
| /* set code loading condition to true */ |
| sdev->code_loading = 1; |
| |
| /* Don't request firmware again if firmware is already requested */ |
| if (plat_data->fw) |
| return 0; |
| |
| fw_filename = kasprintf(GFP_KERNEL, "%s/%s", |
| plat_data->fw_filename_prefix, |
| plat_data->fw_filename); |
| if (!fw_filename) |
| return -ENOMEM; |
| |
| ret = request_firmware(&plat_data->fw, fw_filename, sdev->dev); |
| |
| if (ret < 0) { |
| dev_err(sdev->dev, "error: request firmware %s failed err: %d\n", |
| fw_filename, ret); |
| } |
| |
| kfree(fw_filename); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(snd_sof_load_firmware_raw); |
| |
| int snd_sof_load_firmware_memcpy(struct snd_sof_dev *sdev) |
| { |
| struct snd_sof_pdata *plat_data = sdev->pdata; |
| int ret; |
| |
| ret = snd_sof_load_firmware_raw(sdev); |
| if (ret < 0) |
| return ret; |
| |
| /* make sure the FW header and file is valid */ |
| ret = check_header(sdev, plat_data->fw); |
| if (ret < 0) { |
| dev_err(sdev->dev, "error: invalid FW header\n"); |
| goto error; |
| } |
| |
| /* prepare the DSP for FW loading */ |
| ret = snd_sof_dsp_reset(sdev); |
| if (ret < 0) { |
| dev_err(sdev->dev, "error: failed to reset DSP\n"); |
| goto error; |
| } |
| |
| /* parse and load firmware modules to DSP */ |
| ret = load_modules(sdev, plat_data->fw); |
| if (ret < 0) { |
| dev_err(sdev->dev, "error: invalid FW modules\n"); |
| goto error; |
| } |
| |
| return 0; |
| |
| error: |
| release_firmware(plat_data->fw); |
| plat_data->fw = NULL; |
| return ret; |
| |
| } |
| EXPORT_SYMBOL(snd_sof_load_firmware_memcpy); |
| |
| int snd_sof_load_firmware(struct snd_sof_dev *sdev) |
| { |
| dev_dbg(sdev->dev, "loading firmware\n"); |
| |
| if (sof_ops(sdev)->load_firmware) |
| return sof_ops(sdev)->load_firmware(sdev); |
| return 0; |
| } |
| EXPORT_SYMBOL(snd_sof_load_firmware); |
| |
| int snd_sof_run_firmware(struct snd_sof_dev *sdev) |
| { |
| int ret; |
| int init_core_mask; |
| |
| init_waitqueue_head(&sdev->boot_wait); |
| sdev->boot_complete = false; |
| |
| /* create read-only fw_version debugfs to store boot version info */ |
| if (sdev->first_boot) { |
| ret = snd_sof_debugfs_buf_item(sdev, &sdev->fw_version, |
| sizeof(sdev->fw_version), |
| "fw_version", 0444); |
| /* errors are only due to memory allocation, not debugfs */ |
| if (ret < 0) { |
| dev_err(sdev->dev, "error: snd_sof_debugfs_buf_item failed\n"); |
| return ret; |
| } |
| } |
| |
| /* perform pre fw run operations */ |
| ret = snd_sof_dsp_pre_fw_run(sdev); |
| if (ret < 0) { |
| dev_err(sdev->dev, "error: failed pre fw run op\n"); |
| return ret; |
| } |
| |
| dev_dbg(sdev->dev, "booting DSP firmware\n"); |
| |
| /* boot the firmware on the DSP */ |
| ret = snd_sof_dsp_run(sdev); |
| if (ret < 0) { |
| dev_err(sdev->dev, "error: failed to reset DSP\n"); |
| return ret; |
| } |
| |
| init_core_mask = ret; |
| |
| /* now wait for the DSP to boot */ |
| ret = wait_event_timeout(sdev->boot_wait, sdev->boot_complete, |
| msecs_to_jiffies(sdev->boot_timeout)); |
| if (ret == 0) { |
| dev_err(sdev->dev, "error: firmware boot failure\n"); |
| /* after this point FW_READY msg should be ignored */ |
| sdev->boot_complete = true; |
| snd_sof_dsp_dbg_dump(sdev, SOF_DBG_REGS | SOF_DBG_MBOX | |
| SOF_DBG_TEXT | SOF_DBG_PCI); |
| return -EIO; |
| } |
| |
| dev_info(sdev->dev, "firmware boot complete\n"); |
| |
| /* perform post fw run operations */ |
| ret = snd_sof_dsp_post_fw_run(sdev); |
| if (ret < 0) { |
| dev_err(sdev->dev, "error: failed post fw run op\n"); |
| return ret; |
| } |
| |
| /* fw boot is complete. Update the active cores mask */ |
| sdev->enabled_cores_mask = init_core_mask; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(snd_sof_run_firmware); |
| |
| void snd_sof_fw_unload(struct snd_sof_dev *sdev) |
| { |
| /* TODO: support module unloading at runtime */ |
| } |
| EXPORT_SYMBOL(snd_sof_fw_unload); |