| /* New Hydra driver using generic 8390 core */ | |
| /* Based on old hydra driver by Topi Kanerva (topi@susanna.oulu.fi) */ | |
| /* This file is subject to the terms and conditions of the GNU General */ | |
| /* Public License. See the file COPYING in the main directory of the */ | |
| /* Linux distribution for more details. */ | |
| /* Peter De Schrijver (p2@mind.be) */ | |
| /* Oldenburg 2000 */ | |
| /* The Amiganet is a Zorro-II board made by Hydra Systems. It contains a */ | |
| /* NS8390 NIC (network interface controller) clone, 16 or 64K on-board RAM */ | |
| /* and 10BASE-2 (thin coax) and AUI connectors. */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/string.h> | |
| #include <linux/errno.h> | |
| #include <linux/ioport.h> | |
| #include <linux/slab.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/init.h> | |
| #include <linux/bitops.h> | |
| #include <asm/io.h> | |
| #include <asm/irq.h> | |
| #include <asm/amigaints.h> | |
| #include <asm/amigahw.h> | |
| #include <linux/zorro.h> | |
| #define EI_SHIFT(x) (ei_local->reg_offset[x]) | |
| #define ei_inb(port) in_8(port) | |
| #define ei_outb(val,port) out_8(port,val) | |
| #define ei_inb_p(port) in_8(port) | |
| #define ei_outb_p(val,port) out_8(port,val) | |
| static const char version[] = | |
| "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; | |
| #include "lib8390.c" | |
| #define NE_EN0_DCFG (0x0e*2) | |
| #define NESM_START_PG 0x0 /* First page of TX buffer */ | |
| #define NESM_STOP_PG 0x40 /* Last page +1 of RX ring */ | |
| #define HYDRA_NIC_BASE 0xffe1 | |
| #define HYDRA_ADDRPROM 0xffc0 | |
| #define HYDRA_VERSION "v3.0alpha" | |
| #define WORDSWAP(a) ((((a)>>8)&0xff) | ((a)<<8)) | |
| static int __devinit hydra_init_one(struct zorro_dev *z, | |
| const struct zorro_device_id *ent); | |
| static int __devinit hydra_init(struct zorro_dev *z); | |
| static int hydra_open(struct net_device *dev); | |
| static int hydra_close(struct net_device *dev); | |
| static void hydra_reset_8390(struct net_device *dev); | |
| static void hydra_get_8390_hdr(struct net_device *dev, | |
| struct e8390_pkt_hdr *hdr, int ring_page); | |
| static void hydra_block_input(struct net_device *dev, int count, | |
| struct sk_buff *skb, int ring_offset); | |
| static void hydra_block_output(struct net_device *dev, int count, | |
| const unsigned char *buf, int start_page); | |
| static void __devexit hydra_remove_one(struct zorro_dev *z); | |
| static struct zorro_device_id hydra_zorro_tbl[] __devinitdata = { | |
| { ZORRO_PROD_HYDRA_SYSTEMS_AMIGANET }, | |
| { 0 } | |
| }; | |
| static struct zorro_driver hydra_driver = { | |
| .name = "hydra", | |
| .id_table = hydra_zorro_tbl, | |
| .probe = hydra_init_one, | |
| .remove = __devexit_p(hydra_remove_one), | |
| }; | |
| static int __devinit hydra_init_one(struct zorro_dev *z, | |
| const struct zorro_device_id *ent) | |
| { | |
| int err; | |
| if (!request_mem_region(z->resource.start, 0x10000, "Hydra")) | |
| return -EBUSY; | |
| if ((err = hydra_init(z))) { | |
| release_mem_region(z->resource.start, 0x10000); | |
| return -EBUSY; | |
| } | |
| return 0; | |
| } | |
| static const struct net_device_ops hydra_netdev_ops = { | |
| .ndo_open = hydra_open, | |
| .ndo_stop = hydra_close, | |
| .ndo_start_xmit = ei_start_xmit, | |
| .ndo_tx_timeout = ei_tx_timeout, | |
| .ndo_get_stats = ei_get_stats, | |
| .ndo_set_multicast_list = ei_set_multicast_list, | |
| .ndo_validate_addr = eth_validate_addr, | |
| .ndo_set_mac_address = eth_mac_addr, | |
| .ndo_change_mtu = eth_change_mtu, | |
| #ifdef CONFIG_NET_POLL_CONTROLLER | |
| .ndo_poll_controller = ei_poll, | |
| #endif | |
| }; | |
| static int __devinit hydra_init(struct zorro_dev *z) | |
| { | |
| struct net_device *dev; | |
| unsigned long board = ZTWO_VADDR(z->resource.start); | |
| unsigned long ioaddr = board+HYDRA_NIC_BASE; | |
| const char name[] = "NE2000"; | |
| int start_page, stop_page; | |
| int j; | |
| int err; | |
| static u32 hydra_offsets[16] = { | |
| 0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e, | |
| 0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e, | |
| }; | |
| dev = alloc_ei_netdev(); | |
| if (!dev) | |
| return -ENOMEM; | |
| for(j = 0; j < ETHER_ADDR_LEN; j++) | |
| dev->dev_addr[j] = *((u8 *)(board + HYDRA_ADDRPROM + 2*j)); | |
| /* We must set the 8390 for word mode. */ | |
| z_writeb(0x4b, ioaddr + NE_EN0_DCFG); | |
| start_page = NESM_START_PG; | |
| stop_page = NESM_STOP_PG; | |
| dev->base_addr = ioaddr; | |
| dev->irq = IRQ_AMIGA_PORTS; | |
| /* Install the Interrupt handler */ | |
| if (request_irq(IRQ_AMIGA_PORTS, __ei_interrupt, IRQF_SHARED, "Hydra Ethernet", | |
| dev)) { | |
| free_netdev(dev); | |
| return -EAGAIN; | |
| } | |
| ei_status.name = name; | |
| ei_status.tx_start_page = start_page; | |
| ei_status.stop_page = stop_page; | |
| ei_status.word16 = 1; | |
| ei_status.bigendian = 1; | |
| ei_status.rx_start_page = start_page + TX_PAGES; | |
| ei_status.reset_8390 = &hydra_reset_8390; | |
| ei_status.block_input = &hydra_block_input; | |
| ei_status.block_output = &hydra_block_output; | |
| ei_status.get_8390_hdr = &hydra_get_8390_hdr; | |
| ei_status.reg_offset = hydra_offsets; | |
| dev->netdev_ops = &hydra_netdev_ops; | |
| __NS8390_init(dev, 0); | |
| err = register_netdev(dev); | |
| if (err) { | |
| free_irq(IRQ_AMIGA_PORTS, dev); | |
| free_netdev(dev); | |
| return err; | |
| } | |
| zorro_set_drvdata(z, dev); | |
| printk(KERN_INFO "%s: Hydra at 0x%08llx, address " | |
| "%pM (hydra.c " HYDRA_VERSION ")\n", | |
| dev->name, (unsigned long long)z->resource.start, dev->dev_addr); | |
| return 0; | |
| } | |
| static int hydra_open(struct net_device *dev) | |
| { | |
| __ei_open(dev); | |
| return 0; | |
| } | |
| static int hydra_close(struct net_device *dev) | |
| { | |
| if (ei_debug > 1) | |
| printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name); | |
| __ei_close(dev); | |
| return 0; | |
| } | |
| static void hydra_reset_8390(struct net_device *dev) | |
| { | |
| printk(KERN_INFO "Hydra hw reset not there\n"); | |
| } | |
| static void hydra_get_8390_hdr(struct net_device *dev, | |
| struct e8390_pkt_hdr *hdr, int ring_page) | |
| { | |
| int nic_base = dev->base_addr; | |
| short *ptrs; | |
| unsigned long hdr_start= (nic_base-HYDRA_NIC_BASE) + | |
| ((ring_page - NESM_START_PG)<<8); | |
| ptrs = (short *)hdr; | |
| *(ptrs++) = z_readw(hdr_start); | |
| *((short *)hdr) = WORDSWAP(*((short *)hdr)); | |
| hdr_start += 2; | |
| *(ptrs++) = z_readw(hdr_start); | |
| *((short *)hdr+1) = WORDSWAP(*((short *)hdr+1)); | |
| } | |
| static void hydra_block_input(struct net_device *dev, int count, | |
| struct sk_buff *skb, int ring_offset) | |
| { | |
| unsigned long nic_base = dev->base_addr; | |
| unsigned long mem_base = nic_base - HYDRA_NIC_BASE; | |
| unsigned long xfer_start = mem_base + ring_offset - (NESM_START_PG<<8); | |
| if (count&1) | |
| count++; | |
| if (xfer_start+count > mem_base + (NESM_STOP_PG<<8)) { | |
| int semi_count = (mem_base + (NESM_STOP_PG<<8)) - xfer_start; | |
| z_memcpy_fromio(skb->data,xfer_start,semi_count); | |
| count -= semi_count; | |
| z_memcpy_fromio(skb->data+semi_count, mem_base, count); | |
| } else | |
| z_memcpy_fromio(skb->data, xfer_start,count); | |
| } | |
| static void hydra_block_output(struct net_device *dev, int count, | |
| const unsigned char *buf, int start_page) | |
| { | |
| unsigned long nic_base = dev->base_addr; | |
| unsigned long mem_base = nic_base - HYDRA_NIC_BASE; | |
| if (count&1) | |
| count++; | |
| z_memcpy_toio(mem_base+((start_page - NESM_START_PG)<<8), buf, count); | |
| } | |
| static void __devexit hydra_remove_one(struct zorro_dev *z) | |
| { | |
| struct net_device *dev = zorro_get_drvdata(z); | |
| unregister_netdev(dev); | |
| free_irq(IRQ_AMIGA_PORTS, dev); | |
| release_mem_region(ZTWO_PADDR(dev->base_addr)-HYDRA_NIC_BASE, 0x10000); | |
| free_netdev(dev); | |
| } | |
| static int __init hydra_init_module(void) | |
| { | |
| return zorro_register_driver(&hydra_driver); | |
| } | |
| static void __exit hydra_cleanup_module(void) | |
| { | |
| zorro_unregister_driver(&hydra_driver); | |
| } | |
| module_init(hydra_init_module); | |
| module_exit(hydra_cleanup_module); | |
| MODULE_LICENSE("GPL"); |