| /* | |
| * linux/include/asm-arm/assembler.h | |
| * | |
| * Copyright (C) 1996-2000 Russell King | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * This file contains arm architecture specific defines | |
| * for the different processors. | |
| * | |
| * Do not include any C declarations in this file - it is included by | |
| * assembler source. | |
| */ | |
| #ifndef __ASSEMBLY__ | |
| #error "Only include this from assembly code" | |
| #endif | |
| #include <asm/ptrace.h> | |
| /* | |
| * Endian independent macros for shifting bytes within registers. | |
| */ | |
| #ifndef __ARMEB__ | |
| #define pull lsr | |
| #define push lsl | |
| #define get_byte_0 lsl #0 | |
| #define get_byte_1 lsr #8 | |
| #define get_byte_2 lsr #16 | |
| #define get_byte_3 lsr #24 | |
| #define put_byte_0 lsl #0 | |
| #define put_byte_1 lsl #8 | |
| #define put_byte_2 lsl #16 | |
| #define put_byte_3 lsl #24 | |
| #else | |
| #define pull lsl | |
| #define push lsr | |
| #define get_byte_0 lsr #24 | |
| #define get_byte_1 lsr #16 | |
| #define get_byte_2 lsr #8 | |
| #define get_byte_3 lsl #0 | |
| #define put_byte_0 lsl #24 | |
| #define put_byte_1 lsl #16 | |
| #define put_byte_2 lsl #8 | |
| #define put_byte_3 lsl #0 | |
| #endif | |
| /* | |
| * Data preload for architectures that support it | |
| */ | |
| #if __LINUX_ARM_ARCH__ >= 5 | |
| #define PLD(code...) code | |
| #else | |
| #define PLD(code...) | |
| #endif | |
| #define MODE_USR USR_MODE | |
| #define MODE_FIQ FIQ_MODE | |
| #define MODE_IRQ IRQ_MODE | |
| #define MODE_SVC SVC_MODE | |
| #define DEFAULT_FIQ MODE_FIQ | |
| /* | |
| * LOADREGS - ldm with PC in register list (eg, ldmfd sp!, {pc}) | |
| */ | |
| #ifdef __STDC__ | |
| #define LOADREGS(cond, base, reglist...)\ | |
| ldm##cond base,reglist | |
| #else | |
| #define LOADREGS(cond, base, reglist...)\ | |
| ldm/**/cond base,reglist | |
| #endif | |
| /* | |
| * Build a return instruction for this processor type. | |
| */ | |
| #define RETINSTR(instr, regs...)\ | |
| instr regs | |
| /* | |
| * Save the current IRQ state and disable IRQs. Note that this macro | |
| * assumes FIQs are enabled, and that the processor is in SVC mode. | |
| */ | |
| .macro save_and_disable_irqs, oldcpsr, temp | |
| mrs \oldcpsr, cpsr | |
| mov \temp, #PSR_I_BIT | MODE_SVC | |
| msr cpsr_c, \temp | |
| .endm | |
| /* | |
| * Restore interrupt state previously stored in a register. We don't | |
| * guarantee that this will preserve the flags. | |
| */ | |
| .macro restore_irqs, oldcpsr | |
| msr cpsr_c, \oldcpsr | |
| .endm | |
| /* | |
| * These two are used to save LR/restore PC over a user-based access. | |
| * The old 26-bit architecture requires that we do. On 32-bit | |
| * architecture, we can safely ignore this requirement. | |
| */ | |
| .macro save_lr | |
| .endm | |
| .macro restore_pc | |
| mov pc, lr | |
| .endm | |
| #define USER(x...) \ | |
| 9999: x; \ | |
| .section __ex_table,"a"; \ | |
| .align 3; \ | |
| .long 9999b,9001f; \ | |
| .previous |