arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts - linux - Git at Google

 /*
  * Copyright 2017 Chen-Yu Tsai
  *
  * Chen-Yu Tsai <wens@csie.org>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License as
  *     published by the Free Software Foundation; either version 2 of the
  *     License, or (at your option) any later version.
  *
  *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
  *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
  *     conditions:
  *
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */

 /dts-v1/;
 #include "sun8i-a83t.dtsi"

 #include <dt-bindings/gpio/gpio.h>

 / {
 	model = "Banana Pi BPI-M3";
 	compatible = "sinovoip,bpi-m3", "allwinner,sun8i-a83t";

 	aliases {
 		ethernet0 = &emac;
 		serial0 = &uart0;
 	};

 	chosen {
 		stdout-path = "serial0:115200n8";
 	};

 	connector {
 		compatible = "hdmi-connector";
 		type = "a";

 		port {
 			hdmi_con_in: endpoint {
 				remote-endpoint = <&hdmi_out_con>;
 			};
 		};
 	};

 	leds {
 		compatible = "gpio-leds";

 		blue {
 			label = "bananapi-m3:blue:usr";
 			gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
 		};

 		green {
 			label = "bananapi-m3:green:usr";
 			gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
 		};
 	};

 	reg_usb1_vbus: reg-usb1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		regulator-boot-on;
 		enable-active-high;
 		gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
 	};

 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&ac100_rtc 1>;
 		clock-names = "ext_clock";
 		/* The WiFi low power clock must be 32768 Hz */
 		assigned-clocks = <&ac100_rtc 1>;
 		assigned-clock-rates = <32768>;
 		/* enables internal regulator and de-asserts reset */
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
 	};
 };

 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };

 &cpu100 {
 	cpu-supply = <&reg_dcdc3>;
 };

 &de {
 	status = "okay";
 };

 &ehci0 {
 	/* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
 	status = "okay";

 	/* TODO GL830 USB-to-SATA bridge downstream w/ GPIO power controls */
 };

 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_sw>;
 	phy-handle = <&rgmii_phy>;
 	phy-mode = "rgmii";
 	allwinner,rx-delay-ps = <700>;
 	allwinner,tx-delay-ps = <700>;
 	status = "okay";
 };

 &hdmi {
 	status = "okay";
 };

 &hdmi_out {
 	hdmi_out_con: endpoint {
 		remote-endpoint = <&hdmi_con_in>;
 	};
 };

 &mdio {
 	rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 	};
 };

 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
 };

 &mmc1 {
 	vmmc-supply = <&reg_dldo1>;
 	vqmmc-supply = <&reg_dldo1>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
 	non-removable;
 	status = "okay";

 	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&r_pio>;
 		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-names = "host-wake";
 	};
 };

 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
 	vmmc-supply = <&reg_dcdc1>;
 	vqmmc-supply = <&reg_dcdc1>;
 	bus-width = <8>;
 	non-removable;
 	cap-mmc-hw-reset;
 	status = "okay";
 };

 &r_rsb {
 	status = "okay";

 	axp81x: pmic@3a3 {
 		compatible = "x-powers,axp813";
 		reg = <0x3a3>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		fldoin-supply = <&reg_dcdc5>;
 		swin-supply = <&reg_dcdc1>;
 		x-powers,drive-vbus-en;
 	};

 	ac100: codec@e89 {
 		compatible = "x-powers,ac100";
 		reg = <0xe89>;

 		ac100_codec: codec {
 			compatible = "x-powers,ac100-codec";
 			interrupt-parent = <&r_pio>;
 			interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
 			#clock-cells = <0>;
 			clock-output-names = "4M_adda";
 		};

 		ac100_rtc: rtc {
 			compatible = "x-powers,ac100-rtc";
 			interrupt-parent = <&r_intc>;
 			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&ac100_codec>;
 			#clock-cells = <1>;
 			clock-output-names = "cko1_rtc",
 					     "cko2_rtc",
 					     "cko3_rtc";
 		};
 	};
 };

 #include "axp81x.dtsi"

 &reg_aldo1 {
 	regulator-always-on;
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
 	regulator-name = "vcc-1v8";
 };

 &reg_aldo2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
 	regulator-name = "dram-pll";
 };

 &reg_aldo3 {
 	regulator-always-on;
 	regulator-min-microvolt = <3000000>;
 	regulator-max-microvolt = <3000000>;
 	regulator-name = "avcc";
 };

 &reg_dcdc1 {
 	/* schematics says 3.1V but FEX file says 3.3V */
 	regulator-always-on;
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
 	regulator-name = "vcc-3v3";
 };

 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <700000>;
 	regulator-max-microvolt = <1100000>;
 	regulator-name = "vdd-cpua";
 };

 &reg_dcdc3 {
 	regulator-always-on;
 	regulator-min-microvolt = <700000>;
 	regulator-max-microvolt = <1100000>;
 	regulator-name = "vdd-cpub";
 };

 &reg_dcdc4 {
 	regulator-min-microvolt = <700000>;
 	regulator-max-microvolt = <1100000>;
 	regulator-name = "vdd-gpu";
 };

 &reg_dcdc5 {
 	regulator-always-on;
 	regulator-min-microvolt = <1200000>;
 	regulator-max-microvolt = <1200000>;
 	regulator-name = "vcc-dram";
 };

 &reg_dcdc6 {
 	regulator-always-on;
 	regulator-min-microvolt = <900000>;
 	regulator-max-microvolt = <900000>;
 	regulator-name = "vdd-sys";
 };

 &reg_dldo1 {
 	/*
 	 * This powers both the WiFi/BT module's main power, I/O supply,
 	 * and external pull-ups on all the data lines. It should be set
 	 * to the same voltage as the I/O supply (DCDC1 in this case) to
 	 * avoid any leakage or mismatch.
 	 */
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
 	regulator-name = "vcc-wifi";
 };

 &reg_dldo3 {
 	regulator-always-on;
 	regulator-min-microvolt = <2500000>;
 	regulator-max-microvolt = <2500000>;
 	regulator-name = "vcc-pd";
 };

 &reg_drivevbus {
 	regulator-name = "usb0-vbus";
 	status = "okay";
 };

 &reg_fldo1 {
 	regulator-min-microvolt = <1080000>;
 	regulator-max-microvolt = <1320000>;
 	regulator-name = "vdd12-hsic";
 };

 &reg_fldo2 {
 	/*
 	 * Despite the embedded CPUs core not being used in any way,
 	 * this must remain on or the system will hang.
 	 */
 	regulator-always-on;
 	regulator-min-microvolt = <700000>;
 	regulator-max-microvolt = <1100000>;
 	regulator-name = "vdd-cpus";
 };

 &reg_rtc_ldo {
 	regulator-name = "vcc-rtc";
 };

 &reg_sw {
 	/*
 	 * The PHY requires 20ms after all voltages
 	 * are applied until core logic is ready and
 	 * 30ms after the reset pin is de-asserted.
 	 * Set a 100ms delay to account for PMIC
 	 * ramp time and board traces.
 	 */
 	regulator-enable-ramp-delay = <100000>;
 	regulator-name = "vcc-ephy";
 };

 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };

 &usbphy {
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
	/*
	* Copyright 2017 Chen-Yu Tsai
	*
	* Chen-Yu Tsai <wens@csie.org>
	*
	* This file is dual-licensed: you can use it either under the terms
	* of the GPL or the X11 license, at your option. Note that this dual
	* licensing only applies to this file, and not this project as a
	* whole.
	*
	* a) This file is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of the
	* License, or (at your option) any later version.
	*
	* This file is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* Or, alternatively,
	*
	* b) Permission is hereby granted, free of charge, to any person
	* obtaining a copy of this software and associated documentation
	* files (the "Software"), to deal in the Software without
	* restriction, including without limitation the rights to use,
	* copy, modify, merge, publish, distribute, sublicense, and/or
	* sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following
	* conditions:
	*
	* The above copyright notice and this permission notice shall be
	* included in all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*/

	/dts-v1/;
	#include "sun8i-a83t.dtsi"

	#include <dt-bindings/gpio/gpio.h>

	/ {
	model = "Banana Pi BPI-M3";
	compatible = "sinovoip,bpi-m3", "allwinner,sun8i-a83t";

	aliases {
	ethernet0 = &emac;
	serial0 = &uart0;
	};

	chosen {
	stdout-path = "serial0:115200n8";
	};

	connector {
	compatible = "hdmi-connector";
	type = "a";

	port {
	hdmi_con_in: endpoint {
	remote-endpoint = <&hdmi_out_con>;
	};
	};
	};

	leds {
	compatible = "gpio-leds";

	blue {
	label = "bananapi-m3:blue:usr";
	gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
	};

	green {
	label = "bananapi-m3:green:usr";
	gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
	};
	};

	reg_usb1_vbus: reg-usb1-vbus {
	compatible = "regulator-fixed";
	regulator-name = "usb1-vbus";
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	regulator-boot-on;
	enable-active-high;
	gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
	};

	wifi_pwrseq: wifi_pwrseq {
	compatible = "mmc-pwrseq-simple";
	clocks = <&ac100_rtc 1>;
	clock-names = "ext_clock";
	/* The WiFi low power clock must be 32768 Hz */
	assigned-clocks = <&ac100_rtc 1>;
	assigned-clock-rates = <32768>;
	/* enables internal regulator and de-asserts reset */
	reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
	};
	};

	&cpu0 {
	cpu-supply = <&reg_dcdc2>;
	};

	&cpu100 {
	cpu-supply = <&reg_dcdc3>;
	};

	&de {
	status = "okay";
	};

	&ehci0 {
	/* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
	status = "okay";

	/* TODO GL830 USB-to-SATA bridge downstream w/ GPIO power controls */
	};

	&emac {
	pinctrl-names = "default";
	pinctrl-0 = <&emac_rgmii_pins>;
	phy-supply = <&reg_sw>;
	phy-handle = <&rgmii_phy>;
	phy-mode = "rgmii";
	allwinner,rx-delay-ps = <700>;
	allwinner,tx-delay-ps = <700>;
	status = "okay";
	};

	&hdmi {
	status = "okay";
	};

	&hdmi_out {
	hdmi_out_con: endpoint {
	remote-endpoint = <&hdmi_con_in>;
	};
	};

	&mdio {
	rgmii_phy: ethernet-phy@1 {
	compatible = "ethernet-phy-ieee802.3-c22";
	reg = <1>;
	};
	};

	&mmc0 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc0_pins>;
	vmmc-supply = <&reg_dcdc1>;
	bus-width = <4>;
	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
	status = "okay";
	};

	&mmc1 {
	vmmc-supply = <&reg_dldo1>;
	vqmmc-supply = <&reg_dldo1>;
	mmc-pwrseq = <&wifi_pwrseq>;
	bus-width = <4>;
	non-removable;
	status = "okay";

	brcmf: wifi@1 {
	reg = <1>;
	compatible = "brcm,bcm4329-fmac";
	interrupt-parent = <&r_pio>;
	interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>;
	interrupt-names = "host-wake";
	};
	};

	&mmc2 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
	vmmc-supply = <&reg_dcdc1>;
	vqmmc-supply = <&reg_dcdc1>;
	bus-width = <8>;
	non-removable;
	cap-mmc-hw-reset;
	status = "okay";
	};

	&r_rsb {
	status = "okay";

	axp81x: pmic@3a3 {
	compatible = "x-powers,axp813";
	reg = <0x3a3>;
	interrupt-parent = <&r_intc>;
	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
	eldoin-supply = <&reg_dcdc1>;
	fldoin-supply = <&reg_dcdc5>;
	swin-supply = <&reg_dcdc1>;
	x-powers,drive-vbus-en;
	};

	ac100: codec@e89 {
	compatible = "x-powers,ac100";
	reg = <0xe89>;

	ac100_codec: codec {
	compatible = "x-powers,ac100-codec";
	interrupt-parent = <&r_pio>;
	interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
	#clock-cells = <0>;
	clock-output-names = "4M_adda";
	};

	ac100_rtc: rtc {
	compatible = "x-powers,ac100-rtc";
	interrupt-parent = <&r_intc>;
	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
	clocks = <&ac100_codec>;
	#clock-cells = <1>;
	clock-output-names = "cko1_rtc",
	"cko2_rtc",
	"cko3_rtc";
	};
	};
	};

	#include "axp81x.dtsi"

	&reg_aldo1 {
	regulator-always-on;
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-name = "vcc-1v8";
	};

	&reg_aldo2 {
	regulator-always-on;
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-name = "dram-pll";
	};

	&reg_aldo3 {
	regulator-always-on;
	regulator-min-microvolt = <3000000>;
	regulator-max-microvolt = <3000000>;
	regulator-name = "avcc";
	};

	&reg_dcdc1 {
	/* schematics says 3.1V but FEX file says 3.3V */
	regulator-always-on;
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-name = "vcc-3v3";
	};

	&reg_dcdc2 {
	regulator-always-on;
	regulator-min-microvolt = <700000>;
	regulator-max-microvolt = <1100000>;
	regulator-name = "vdd-cpua";
	};

	&reg_dcdc3 {
	regulator-always-on;
	regulator-min-microvolt = <700000>;
	regulator-max-microvolt = <1100000>;
	regulator-name = "vdd-cpub";
	};

	&reg_dcdc4 {
	regulator-min-microvolt = <700000>;
	regulator-max-microvolt = <1100000>;
	regulator-name = "vdd-gpu";
	};

	&reg_dcdc5 {
	regulator-always-on;
	regulator-min-microvolt = <1200000>;
	regulator-max-microvolt = <1200000>;
	regulator-name = "vcc-dram";
	};

	&reg_dcdc6 {
	regulator-always-on;
	regulator-min-microvolt = <900000>;
	regulator-max-microvolt = <900000>;
	regulator-name = "vdd-sys";
	};

	&reg_dldo1 {
	/*
	* This powers both the WiFi/BT module's main power, I/O supply,
	* and external pull-ups on all the data lines. It should be set
	* to the same voltage as the I/O supply (DCDC1 in this case) to
	* avoid any leakage or mismatch.
	*/
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-name = "vcc-wifi";
	};

	&reg_dldo3 {
	regulator-always-on;
	regulator-min-microvolt = <2500000>;
	regulator-max-microvolt = <2500000>;
	regulator-name = "vcc-pd";
	};

	&reg_drivevbus {
	regulator-name = "usb0-vbus";
	status = "okay";
	};

	&reg_fldo1 {
	regulator-min-microvolt = <1080000>;
	regulator-max-microvolt = <1320000>;
	regulator-name = "vdd12-hsic";
	};

	&reg_fldo2 {
	/*
	* Despite the embedded CPUs core not being used in any way,
	* this must remain on or the system will hang.
	*/
	regulator-always-on;
	regulator-min-microvolt = <700000>;
	regulator-max-microvolt = <1100000>;
	regulator-name = "vdd-cpus";
	};

	&reg_rtc_ldo {
	regulator-name = "vcc-rtc";
	};

	&reg_sw {
	/*
	* The PHY requires 20ms after all voltages
	* are applied until core logic is ready and
	* 30ms after the reset pin is de-asserted.
	* Set a 100ms delay to account for PMIC
	* ramp time and board traces.
	*/
	regulator-enable-ramp-delay = <100000>;
	regulator-name = "vcc-ephy";
	};

	&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pb_pins>;
	status = "okay";
	};

	&usbphy {
	usb1_vbus-supply = <&reg_usb1_vbus>;
	status = "okay";
	};