| /* | |
| * PowerNV setup code. | |
| * | |
| * Copyright 2011 IBM Corp. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| */ | |
| #undef DEBUG | |
| #include <linux/cpu.h> | |
| #include <linux/errno.h> | |
| #include <linux/sched.h> | |
| #include <linux/kernel.h> | |
| #include <linux/tty.h> | |
| #include <linux/reboot.h> | |
| #include <linux/init.h> | |
| #include <linux/console.h> | |
| #include <linux/delay.h> | |
| #include <linux/irq.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/of.h> | |
| #include <linux/of_fdt.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/bug.h> | |
| #include <asm/machdep.h> | |
| #include <asm/firmware.h> | |
| #include <asm/xics.h> | |
| #include <asm/rtas.h> | |
| #include <asm/opal.h> | |
| #include <asm/kexec.h> | |
| #include "powernv.h" | |
| static void __init pnv_setup_arch(void) | |
| { | |
| /* Initialize SMP */ | |
| pnv_smp_init(); | |
| /* Setup PCI */ | |
| pnv_pci_init(); | |
| /* Setup RTC and NVRAM callbacks */ | |
| if (firmware_has_feature(FW_FEATURE_OPAL)) | |
| opal_nvram_init(); | |
| /* Enable NAP mode */ | |
| powersave_nap = 1; | |
| /* XXX PMCS */ | |
| } | |
| static void __init pnv_init_early(void) | |
| { | |
| /* | |
| * Initialize the LPC bus now so that legacy serial | |
| * ports can be found on it | |
| */ | |
| opal_lpc_init(); | |
| #ifdef CONFIG_HVC_OPAL | |
| if (firmware_has_feature(FW_FEATURE_OPAL)) | |
| hvc_opal_init_early(); | |
| else | |
| #endif | |
| add_preferred_console("hvc", 0, NULL); | |
| } | |
| static void __init pnv_init_IRQ(void) | |
| { | |
| xics_init(); | |
| WARN_ON(!ppc_md.get_irq); | |
| } | |
| static void pnv_show_cpuinfo(struct seq_file *m) | |
| { | |
| struct device_node *root; | |
| const char *model = ""; | |
| root = of_find_node_by_path("/"); | |
| if (root) | |
| model = of_get_property(root, "model", NULL); | |
| seq_printf(m, "machine\t\t: PowerNV %s\n", model); | |
| if (firmware_has_feature(FW_FEATURE_OPALv3)) | |
| seq_printf(m, "firmware\t: OPAL v3\n"); | |
| else if (firmware_has_feature(FW_FEATURE_OPALv2)) | |
| seq_printf(m, "firmware\t: OPAL v2\n"); | |
| else if (firmware_has_feature(FW_FEATURE_OPAL)) | |
| seq_printf(m, "firmware\t: OPAL v1\n"); | |
| else | |
| seq_printf(m, "firmware\t: BML\n"); | |
| of_node_put(root); | |
| } | |
| static void __noreturn pnv_restart(char *cmd) | |
| { | |
| long rc = OPAL_BUSY; | |
| opal_notifier_disable(); | |
| while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { | |
| rc = opal_cec_reboot(); | |
| if (rc == OPAL_BUSY_EVENT) | |
| opal_poll_events(NULL); | |
| else | |
| mdelay(10); | |
| } | |
| for (;;) | |
| opal_poll_events(NULL); | |
| } | |
| static void __noreturn pnv_power_off(void) | |
| { | |
| long rc = OPAL_BUSY; | |
| opal_notifier_disable(); | |
| while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { | |
| rc = opal_cec_power_down(0); | |
| if (rc == OPAL_BUSY_EVENT) | |
| opal_poll_events(NULL); | |
| else | |
| mdelay(10); | |
| } | |
| for (;;) | |
| opal_poll_events(NULL); | |
| } | |
| static void __noreturn pnv_halt(void) | |
| { | |
| pnv_power_off(); | |
| } | |
| static void pnv_progress(char *s, unsigned short hex) | |
| { | |
| } | |
| static void pnv_shutdown(void) | |
| { | |
| /* Let the PCI code clear up IODA tables */ | |
| pnv_pci_shutdown(); | |
| /* And unregister all OPAL interrupts so they don't fire | |
| * up while we kexec | |
| */ | |
| opal_shutdown(); | |
| } | |
| #ifdef CONFIG_KEXEC | |
| static void pnv_kexec_cpu_down(int crash_shutdown, int secondary) | |
| { | |
| xics_kexec_teardown_cpu(secondary); | |
| /* Return secondary CPUs to firmware on OPAL v3 */ | |
| if (firmware_has_feature(FW_FEATURE_OPALv3) && secondary) { | |
| mb(); | |
| get_paca()->kexec_state = KEXEC_STATE_REAL_MODE; | |
| mb(); | |
| /* Return the CPU to OPAL */ | |
| opal_return_cpu(); | |
| } | |
| } | |
| #endif /* CONFIG_KEXEC */ | |
| static void __init pnv_setup_machdep_opal(void) | |
| { | |
| ppc_md.get_boot_time = opal_get_boot_time; | |
| ppc_md.get_rtc_time = opal_get_rtc_time; | |
| ppc_md.set_rtc_time = opal_set_rtc_time; | |
| ppc_md.restart = pnv_restart; | |
| ppc_md.power_off = pnv_power_off; | |
| ppc_md.halt = pnv_halt; | |
| ppc_md.machine_check_exception = opal_machine_check; | |
| } | |
| #ifdef CONFIG_PPC_POWERNV_RTAS | |
| static void __init pnv_setup_machdep_rtas(void) | |
| { | |
| if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) { | |
| ppc_md.get_boot_time = rtas_get_boot_time; | |
| ppc_md.get_rtc_time = rtas_get_rtc_time; | |
| ppc_md.set_rtc_time = rtas_set_rtc_time; | |
| } | |
| ppc_md.restart = rtas_restart; | |
| ppc_md.power_off = rtas_power_off; | |
| ppc_md.halt = rtas_halt; | |
| } | |
| #endif /* CONFIG_PPC_POWERNV_RTAS */ | |
| static int __init pnv_probe(void) | |
| { | |
| unsigned long root = of_get_flat_dt_root(); | |
| if (!of_flat_dt_is_compatible(root, "ibm,powernv")) | |
| return 0; | |
| hpte_init_native(); | |
| if (firmware_has_feature(FW_FEATURE_OPAL)) | |
| pnv_setup_machdep_opal(); | |
| #ifdef CONFIG_PPC_POWERNV_RTAS | |
| else if (rtas.base) | |
| pnv_setup_machdep_rtas(); | |
| #endif /* CONFIG_PPC_POWERNV_RTAS */ | |
| pr_debug("PowerNV detected !\n"); | |
| return 1; | |
| } | |
| define_machine(powernv) { | |
| .name = "PowerNV", | |
| .probe = pnv_probe, | |
| .init_early = pnv_init_early, | |
| .setup_arch = pnv_setup_arch, | |
| .init_IRQ = pnv_init_IRQ, | |
| .show_cpuinfo = pnv_show_cpuinfo, | |
| .progress = pnv_progress, | |
| .machine_shutdown = pnv_shutdown, | |
| .power_save = power7_idle, | |
| .calibrate_decr = generic_calibrate_decr, | |
| #ifdef CONFIG_KEXEC | |
| .kexec_cpu_down = pnv_kexec_cpu_down, | |
| #endif | |
| }; |