| /* | |
| * linux/arch/m32r/platforms/mappi2/setup.c | |
| * | |
| * Setup routines for Renesas MAPPI-II(M3A-ZA36) Board | |
| * | |
| * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, | |
| * Hitoshi Yamamoto, Mamoru Sakugawa | |
| */ | |
| #include <linux/irq.h> | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/platform_device.h> | |
| #include <asm/m32r.h> | |
| #include <asm/io.h> | |
| #define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) | |
| icu_data_t icu_data[NR_IRQS]; | |
| static void disable_mappi2_irq(unsigned int irq) | |
| { | |
| unsigned long port, data; | |
| if ((irq == 0) ||(irq >= NR_IRQS)) { | |
| printk("bad irq 0x%08x\n", irq); | |
| return; | |
| } | |
| port = irq2port(irq); | |
| data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; | |
| outl(data, port); | |
| } | |
| static void enable_mappi2_irq(unsigned int irq) | |
| { | |
| unsigned long port, data; | |
| if ((irq == 0) ||(irq >= NR_IRQS)) { | |
| printk("bad irq 0x%08x\n", irq); | |
| return; | |
| } | |
| port = irq2port(irq); | |
| data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; | |
| outl(data, port); | |
| } | |
| static void mask_mappi2(struct irq_data *data) | |
| { | |
| disable_mappi2_irq(data->irq); | |
| } | |
| static void unmask_mappi2(struct irq_data *data) | |
| { | |
| enable_mappi2_irq(data->irq); | |
| } | |
| static void shutdown_mappi2(struct irq_data *data) | |
| { | |
| unsigned long port; | |
| port = irq2port(data->irq); | |
| outl(M32R_ICUCR_ILEVEL7, port); | |
| } | |
| static struct irq_chip mappi2_irq_type = | |
| { | |
| .name = "MAPPI2-IRQ", | |
| .irq_shutdown = shutdown_mappi2, | |
| .irq_mask = mask_mappi2, | |
| .irq_unmask = unmask_mappi2, | |
| }; | |
| void __init init_IRQ(void) | |
| { | |
| #if defined(CONFIG_SMC91X) | |
| /* INT0 : LAN controller (SMC91111) */ | |
| irq_set_chip_and_handler(M32R_IRQ_INT0, &mappi2_irq_type, | |
| handle_level_irq); | |
| icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; | |
| disable_mappi2_irq(M32R_IRQ_INT0); | |
| #endif /* CONFIG_SMC91X */ | |
| /* MFT2 : system timer */ | |
| irq_set_chip_and_handler(M32R_IRQ_MFT2, &mappi2_irq_type, | |
| handle_level_irq); | |
| icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; | |
| disable_mappi2_irq(M32R_IRQ_MFT2); | |
| #ifdef CONFIG_SERIAL_M32R_SIO | |
| /* SIO0_R : uart receive data */ | |
| irq_set_chip_and_handler(M32R_IRQ_SIO0_R, &mappi2_irq_type, | |
| handle_level_irq); | |
| icu_data[M32R_IRQ_SIO0_R].icucr = 0; | |
| disable_mappi2_irq(M32R_IRQ_SIO0_R); | |
| /* SIO0_S : uart send data */ | |
| irq_set_chip_and_handler(M32R_IRQ_SIO0_S, &mappi2_irq_type, | |
| handle_level_irq); | |
| icu_data[M32R_IRQ_SIO0_S].icucr = 0; | |
| disable_mappi2_irq(M32R_IRQ_SIO0_S); | |
| /* SIO1_R : uart receive data */ | |
| irq_set_chip_and_handler(M32R_IRQ_SIO1_R, &mappi2_irq_type, | |
| handle_level_irq); | |
| icu_data[M32R_IRQ_SIO1_R].icucr = 0; | |
| disable_mappi2_irq(M32R_IRQ_SIO1_R); | |
| /* SIO1_S : uart send data */ | |
| irq_set_chip_and_handler(M32R_IRQ_SIO1_S, &mappi2_irq_type, | |
| handle_level_irq); | |
| icu_data[M32R_IRQ_SIO1_S].icucr = 0; | |
| disable_mappi2_irq(M32R_IRQ_SIO1_S); | |
| #endif /* CONFIG_M32R_USE_DBG_CONSOLE */ | |
| #if defined(CONFIG_USB) | |
| /* INT1 : USB Host controller interrupt */ | |
| irq_set_chip_and_handler(M32R_IRQ_INT1, &mappi2_irq_type, | |
| handle_level_irq); | |
| icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD01; | |
| disable_mappi2_irq(M32R_IRQ_INT1); | |
| #endif /* CONFIG_USB */ | |
| /* ICUCR40: CFC IREQ */ | |
| irq_set_chip_and_handler(PLD_IRQ_CFIREQ, &mappi2_irq_type, | |
| handle_level_irq); | |
| icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; | |
| disable_mappi2_irq(PLD_IRQ_CFIREQ); | |
| #if defined(CONFIG_M32R_CFC) | |
| /* ICUCR41: CFC Insert */ | |
| irq_set_chip_and_handler(PLD_IRQ_CFC_INSERT, &mappi2_irq_type, | |
| handle_level_irq); | |
| icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00; | |
| disable_mappi2_irq(PLD_IRQ_CFC_INSERT); | |
| /* ICUCR42: CFC Eject */ | |
| irq_set_chip_and_handler(PLD_IRQ_CFC_EJECT, &mappi2_irq_type, | |
| handle_level_irq); | |
| icu_data[PLD_IRQ_CFC_EJECT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; | |
| disable_mappi2_irq(PLD_IRQ_CFC_EJECT); | |
| #endif /* CONFIG_MAPPI2_CFC */ | |
| } | |
| #define LAN_IOSTART 0x300 | |
| #define LAN_IOEND 0x320 | |
| static struct resource smc91x_resources[] = { | |
| [0] = { | |
| .start = (LAN_IOSTART), | |
| .end = (LAN_IOEND), | |
| .flags = IORESOURCE_MEM, | |
| }, | |
| [1] = { | |
| .start = M32R_IRQ_INT0, | |
| .end = M32R_IRQ_INT0, | |
| .flags = IORESOURCE_IRQ, | |
| } | |
| }; | |
| static struct platform_device smc91x_device = { | |
| .name = "smc91x", | |
| .id = 0, | |
| .num_resources = ARRAY_SIZE(smc91x_resources), | |
| .resource = smc91x_resources, | |
| }; | |
| static int __init platform_init(void) | |
| { | |
| platform_device_register(&smc91x_device); | |
| return 0; | |
| } | |
| arch_initcall(platform_init); |