| /* | |
| * arch/arm/plat-spear/time.c | |
| * | |
| * Copyright (C) 2010 ST Microelectronics | |
| * Shiraz Hashim<shiraz.hashim@st.com> | |
| * | |
| * This file is licensed under the terms of the GNU General Public | |
| * License version 2. This program is licensed "as is" without any | |
| * warranty of any kind, whether express or implied. | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/clocksource.h> | |
| #include <linux/err.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/ioport.h> | |
| #include <linux/io.h> | |
| #include <linux/kernel.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/of_address.h> | |
| #include <linux/time.h> | |
| #include <linux/irq.h> | |
| #include <asm/mach/time.h> | |
| #include "generic.h" | |
| /* | |
| * We would use TIMER0 and TIMER1 as clockevent and clocksource. | |
| * Timer0 and Timer1 both belong to same gpt block in cpu subbsystem. Further | |
| * they share same functional clock. Any change in one's functional clock will | |
| * also affect other timer. | |
| */ | |
| #define CLKEVT 0 /* gpt0, channel0 as clockevent */ | |
| #define CLKSRC 1 /* gpt0, channel1 as clocksource */ | |
| /* Register offsets, x is channel number */ | |
| #define CR(x) ((x) * 0x80 + 0x80) | |
| #define IR(x) ((x) * 0x80 + 0x84) | |
| #define LOAD(x) ((x) * 0x80 + 0x88) | |
| #define COUNT(x) ((x) * 0x80 + 0x8C) | |
| /* Reg bit definitions */ | |
| #define CTRL_INT_ENABLE 0x0100 | |
| #define CTRL_ENABLE 0x0020 | |
| #define CTRL_ONE_SHOT 0x0010 | |
| #define CTRL_PRESCALER1 0x0 | |
| #define CTRL_PRESCALER2 0x1 | |
| #define CTRL_PRESCALER4 0x2 | |
| #define CTRL_PRESCALER8 0x3 | |
| #define CTRL_PRESCALER16 0x4 | |
| #define CTRL_PRESCALER32 0x5 | |
| #define CTRL_PRESCALER64 0x6 | |
| #define CTRL_PRESCALER128 0x7 | |
| #define CTRL_PRESCALER256 0x8 | |
| #define INT_STATUS 0x1 | |
| /* | |
| * Minimum clocksource/clockevent timer range in seconds | |
| */ | |
| #define SPEAR_MIN_RANGE 4 | |
| static __iomem void *gpt_base; | |
| static struct clk *gpt_clk; | |
| static void clockevent_set_mode(enum clock_event_mode mode, | |
| struct clock_event_device *clk_event_dev); | |
| static int clockevent_next_event(unsigned long evt, | |
| struct clock_event_device *clk_event_dev); | |
| static void spear_clocksource_init(void) | |
| { | |
| u32 tick_rate; | |
| u16 val; | |
| /* program the prescaler (/256)*/ | |
| writew(CTRL_PRESCALER256, gpt_base + CR(CLKSRC)); | |
| /* find out actual clock driving Timer */ | |
| tick_rate = clk_get_rate(gpt_clk); | |
| tick_rate >>= CTRL_PRESCALER256; | |
| writew(0xFFFF, gpt_base + LOAD(CLKSRC)); | |
| val = readw(gpt_base + CR(CLKSRC)); | |
| val &= ~CTRL_ONE_SHOT; /* autoreload mode */ | |
| val |= CTRL_ENABLE ; | |
| writew(val, gpt_base + CR(CLKSRC)); | |
| /* register the clocksource */ | |
| clocksource_mmio_init(gpt_base + COUNT(CLKSRC), "tmr1", tick_rate, | |
| 200, 16, clocksource_mmio_readw_up); | |
| } | |
| static struct clock_event_device clkevt = { | |
| .name = "tmr0", | |
| .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, | |
| .set_mode = clockevent_set_mode, | |
| .set_next_event = clockevent_next_event, | |
| .shift = 0, /* to be computed */ | |
| }; | |
| static void clockevent_set_mode(enum clock_event_mode mode, | |
| struct clock_event_device *clk_event_dev) | |
| { | |
| u32 period; | |
| u16 val; | |
| /* stop the timer */ | |
| val = readw(gpt_base + CR(CLKEVT)); | |
| val &= ~CTRL_ENABLE; | |
| writew(val, gpt_base + CR(CLKEVT)); | |
| switch (mode) { | |
| case CLOCK_EVT_MODE_PERIODIC: | |
| period = clk_get_rate(gpt_clk) / HZ; | |
| period >>= CTRL_PRESCALER16; | |
| writew(period, gpt_base + LOAD(CLKEVT)); | |
| val = readw(gpt_base + CR(CLKEVT)); | |
| val &= ~CTRL_ONE_SHOT; | |
| val |= CTRL_ENABLE | CTRL_INT_ENABLE; | |
| writew(val, gpt_base + CR(CLKEVT)); | |
| break; | |
| case CLOCK_EVT_MODE_ONESHOT: | |
| val = readw(gpt_base + CR(CLKEVT)); | |
| val |= CTRL_ONE_SHOT; | |
| writew(val, gpt_base + CR(CLKEVT)); | |
| break; | |
| case CLOCK_EVT_MODE_UNUSED: | |
| case CLOCK_EVT_MODE_SHUTDOWN: | |
| case CLOCK_EVT_MODE_RESUME: | |
| break; | |
| default: | |
| pr_err("Invalid mode requested\n"); | |
| break; | |
| } | |
| } | |
| static int clockevent_next_event(unsigned long cycles, | |
| struct clock_event_device *clk_event_dev) | |
| { | |
| u16 val = readw(gpt_base + CR(CLKEVT)); | |
| if (val & CTRL_ENABLE) | |
| writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT)); | |
| writew(cycles, gpt_base + LOAD(CLKEVT)); | |
| val |= CTRL_ENABLE | CTRL_INT_ENABLE; | |
| writew(val, gpt_base + CR(CLKEVT)); | |
| return 0; | |
| } | |
| static irqreturn_t spear_timer_interrupt(int irq, void *dev_id) | |
| { | |
| struct clock_event_device *evt = &clkevt; | |
| writew(INT_STATUS, gpt_base + IR(CLKEVT)); | |
| evt->event_handler(evt); | |
| return IRQ_HANDLED; | |
| } | |
| static struct irqaction spear_timer_irq = { | |
| .name = "timer", | |
| .flags = IRQF_DISABLED | IRQF_TIMER, | |
| .handler = spear_timer_interrupt | |
| }; | |
| static void __init spear_clockevent_init(int irq) | |
| { | |
| u32 tick_rate; | |
| /* program the prescaler */ | |
| writew(CTRL_PRESCALER16, gpt_base + CR(CLKEVT)); | |
| tick_rate = clk_get_rate(gpt_clk); | |
| tick_rate >>= CTRL_PRESCALER16; | |
| clkevt.cpumask = cpumask_of(0); | |
| clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0); | |
| setup_irq(irq, &spear_timer_irq); | |
| } | |
| const static struct of_device_id timer_of_match[] __initconst = { | |
| { .compatible = "st,spear-timer", }, | |
| { }, | |
| }; | |
| void __init spear_setup_of_timer(void) | |
| { | |
| struct device_node *np; | |
| int irq, ret; | |
| np = of_find_matching_node(NULL, timer_of_match); | |
| if (!np) { | |
| pr_err("%s: No timer passed via DT\n", __func__); | |
| return; | |
| } | |
| irq = irq_of_parse_and_map(np, 0); | |
| if (!irq) { | |
| pr_err("%s: No irq passed for timer via DT\n", __func__); | |
| return; | |
| } | |
| gpt_base = of_iomap(np, 0); | |
| if (!gpt_base) { | |
| pr_err("%s: of iomap failed\n", __func__); | |
| return; | |
| } | |
| gpt_clk = clk_get_sys("gpt0", NULL); | |
| if (!gpt_clk) { | |
| pr_err("%s:couldn't get clk for gpt\n", __func__); | |
| goto err_iomap; | |
| } | |
| ret = clk_prepare_enable(gpt_clk); | |
| if (ret < 0) { | |
| pr_err("%s:couldn't prepare-enable gpt clock\n", __func__); | |
| goto err_prepare_enable_clk; | |
| } | |
| spear_clockevent_init(irq); | |
| spear_clocksource_init(); | |
| return; | |
| err_prepare_enable_clk: | |
| clk_put(gpt_clk); | |
| err_iomap: | |
| iounmap(gpt_base); | |
| } |