| /* | |
| * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. | |
| * http://www.samsung.com | |
| * | |
| * Copyright 2009 Samsung Electronics Co. | |
| * Byungho Min <bhmin@samsung.com> | |
| * | |
| * Common Codes for S5PC100 | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/types.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/list.h> | |
| #include <linux/timer.h> | |
| #include <linux/init.h> | |
| #include <linux/clk.h> | |
| #include <linux/io.h> | |
| #include <linux/device.h> | |
| #include <linux/serial_core.h> | |
| #include <clocksource/samsung_pwm.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/sched.h> | |
| #include <linux/reboot.h> | |
| #include <asm/irq.h> | |
| #include <asm/proc-fns.h> | |
| #include <asm/system_misc.h> | |
| #include <asm/mach/arch.h> | |
| #include <asm/mach/map.h> | |
| #include <asm/mach/irq.h> | |
| #include <mach/map.h> | |
| #include <mach/hardware.h> | |
| #include <mach/regs-clock.h> | |
| #include <plat/cpu.h> | |
| #include <plat/devs.h> | |
| #include <plat/clock.h> | |
| #include <plat/sdhci.h> | |
| #include <plat/adc-core.h> | |
| #include <plat/ata-core.h> | |
| #include <plat/fb-core.h> | |
| #include <plat/iic-core.h> | |
| #include <plat/onenand-core.h> | |
| #include <plat/pwm-core.h> | |
| #include <plat/spi-core.h> | |
| #include <plat/regs-serial.h> | |
| #include <plat/watchdog-reset.h> | |
| #include "common.h" | |
| static const char name_s5pc100[] = "S5PC100"; | |
| static struct cpu_table cpu_ids[] __initdata = { | |
| { | |
| .idcode = S5PC100_CPU_ID, | |
| .idmask = S5PC100_CPU_MASK, | |
| .map_io = s5pc100_map_io, | |
| .init_clocks = s5pc100_init_clocks, | |
| .init_uarts = s5pc100_init_uarts, | |
| .init = s5pc100_init, | |
| .name = name_s5pc100, | |
| }, | |
| }; | |
| /* Initial IO mappings */ | |
| static struct map_desc s5pc100_iodesc[] __initdata = { | |
| { | |
| .virtual = (unsigned long)S5P_VA_CHIPID, | |
| .pfn = __phys_to_pfn(S5PC100_PA_CHIPID), | |
| .length = SZ_4K, | |
| .type = MT_DEVICE, | |
| }, { | |
| .virtual = (unsigned long)S3C_VA_SYS, | |
| .pfn = __phys_to_pfn(S5PC100_PA_SYSCON), | |
| .length = SZ_64K, | |
| .type = MT_DEVICE, | |
| }, { | |
| .virtual = (unsigned long)S3C_VA_TIMER, | |
| .pfn = __phys_to_pfn(S5PC100_PA_TIMER), | |
| .length = SZ_16K, | |
| .type = MT_DEVICE, | |
| }, { | |
| .virtual = (unsigned long)S3C_VA_WATCHDOG, | |
| .pfn = __phys_to_pfn(S5PC100_PA_WATCHDOG), | |
| .length = SZ_4K, | |
| .type = MT_DEVICE, | |
| }, { | |
| .virtual = (unsigned long)S5P_VA_SROMC, | |
| .pfn = __phys_to_pfn(S5PC100_PA_SROMC), | |
| .length = SZ_4K, | |
| .type = MT_DEVICE, | |
| }, { | |
| .virtual = (unsigned long)S5P_VA_SYSTIMER, | |
| .pfn = __phys_to_pfn(S5PC100_PA_SYSTIMER), | |
| .length = SZ_16K, | |
| .type = MT_DEVICE, | |
| }, { | |
| .virtual = (unsigned long)S5P_VA_GPIO, | |
| .pfn = __phys_to_pfn(S5PC100_PA_GPIO), | |
| .length = SZ_4K, | |
| .type = MT_DEVICE, | |
| }, { | |
| .virtual = (unsigned long)VA_VIC0, | |
| .pfn = __phys_to_pfn(S5PC100_PA_VIC0), | |
| .length = SZ_16K, | |
| .type = MT_DEVICE, | |
| }, { | |
| .virtual = (unsigned long)VA_VIC1, | |
| .pfn = __phys_to_pfn(S5PC100_PA_VIC1), | |
| .length = SZ_16K, | |
| .type = MT_DEVICE, | |
| }, { | |
| .virtual = (unsigned long)VA_VIC2, | |
| .pfn = __phys_to_pfn(S5PC100_PA_VIC2), | |
| .length = SZ_16K, | |
| .type = MT_DEVICE, | |
| }, { | |
| .virtual = (unsigned long)S3C_VA_UART, | |
| .pfn = __phys_to_pfn(S3C_PA_UART), | |
| .length = SZ_512K, | |
| .type = MT_DEVICE, | |
| }, { | |
| .virtual = (unsigned long)S5PC100_VA_OTHERS, | |
| .pfn = __phys_to_pfn(S5PC100_PA_OTHERS), | |
| .length = SZ_4K, | |
| .type = MT_DEVICE, | |
| } | |
| }; | |
| static struct samsung_pwm_variant s5pc100_pwm_variant = { | |
| .bits = 32, | |
| .div_base = 0, | |
| .has_tint_cstat = true, | |
| .tclk_mask = (1 << 5), | |
| }; | |
| void __init samsung_set_timer_source(unsigned int event, unsigned int source) | |
| { | |
| s5pc100_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; | |
| s5pc100_pwm_variant.output_mask &= ~(BIT(event) | BIT(source)); | |
| } | |
| void __init samsung_timer_init(void) | |
| { | |
| unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { | |
| IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC, | |
| IRQ_TIMER3_VIC, IRQ_TIMER4_VIC, | |
| }; | |
| samsung_pwm_clocksource_init(S3C_VA_TIMER, | |
| timer_irqs, &s5pc100_pwm_variant); | |
| } | |
| /* | |
| * s5pc100_map_io | |
| * | |
| * register the standard CPU IO areas | |
| */ | |
| void __init s5pc100_init_io(struct map_desc *mach_desc, int size) | |
| { | |
| /* initialize the io descriptors we need for initialization */ | |
| iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc)); | |
| if (mach_desc) | |
| iotable_init(mach_desc, size); | |
| /* detect cpu id and rev. */ | |
| s5p_init_cpu(S5P_VA_CHIPID); | |
| s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); | |
| samsung_pwm_set_platdata(&s5pc100_pwm_variant); | |
| } | |
| void __init s5pc100_map_io(void) | |
| { | |
| /* initialise device information early */ | |
| s5pc100_default_sdhci0(); | |
| s5pc100_default_sdhci1(); | |
| s5pc100_default_sdhci2(); | |
| s3c_adc_setname("s3c64xx-adc"); | |
| /* the i2c devices are directly compatible with s3c2440 */ | |
| s3c_i2c0_setname("s3c2440-i2c"); | |
| s3c_i2c1_setname("s3c2440-i2c"); | |
| s3c_onenand_setname("s5pc100-onenand"); | |
| s3c_fb_setname("s5pc100-fb"); | |
| s3c_cfcon_setname("s5pc100-pata"); | |
| s3c64xx_spi_setname("s5pc100-spi"); | |
| } | |
| void __init s5pc100_init_clocks(int xtal) | |
| { | |
| printk(KERN_DEBUG "%s: initializing clocks\n", __func__); | |
| s3c24xx_register_baseclocks(xtal); | |
| s5p_register_clocks(xtal); | |
| s5pc100_register_clocks(); | |
| s5pc100_setup_clocks(); | |
| samsung_wdt_reset_init(S3C_VA_WATCHDOG); | |
| } | |
| void __init s5pc100_init_irq(void) | |
| { | |
| u32 vic[] = {~0, ~0, ~0}; | |
| /* VIC0, VIC1, and VIC2 are fully populated. */ | |
| s5p_init_irq(vic, ARRAY_SIZE(vic)); | |
| } | |
| static struct bus_type s5pc100_subsys = { | |
| .name = "s5pc100-core", | |
| .dev_name = "s5pc100-core", | |
| }; | |
| static struct device s5pc100_dev = { | |
| .bus = &s5pc100_subsys, | |
| }; | |
| static int __init s5pc100_core_init(void) | |
| { | |
| return subsys_system_register(&s5pc100_subsys, NULL); | |
| } | |
| core_initcall(s5pc100_core_init); | |
| int __init s5pc100_init(void) | |
| { | |
| printk(KERN_INFO "S5PC100: Initializing architecture\n"); | |
| return device_register(&s5pc100_dev); | |
| } | |
| /* uart registration process */ | |
| void __init s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no) | |
| { | |
| s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no); | |
| } | |
| void s5pc100_restart(enum reboot_mode mode, const char *cmd) | |
| { | |
| if (mode != REBOOT_SOFT) | |
| samsung_wdt_reset(); | |
| soft_restart(0); | |
| } |