| /* | |
| * OMAP2+ MPU WD_TIMER-specific code | |
| * | |
| * Copyright (C) 2012 Texas Instruments, Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/io.h> | |
| #include <linux/err.h> | |
| #include <linux/platform_data/omap-wd-timer.h> | |
| #include "omap_hwmod.h" | |
| #include "omap_device.h" | |
| #include "wd_timer.h" | |
| #include "common.h" | |
| #include "prm.h" | |
| #include "soc.h" | |
| /* | |
| * In order to avoid any assumptions from bootloader regarding WDT | |
| * settings, WDT module is reset during init. This enables the watchdog | |
| * timer. Hence it is required to disable the watchdog after the WDT reset | |
| * during init. Otherwise the system would reboot as per the default | |
| * watchdog timer registers settings. | |
| */ | |
| #define OMAP_WDT_WPS 0x34 | |
| #define OMAP_WDT_SPR 0x48 | |
| int omap2_wd_timer_disable(struct omap_hwmod *oh) | |
| { | |
| void __iomem *base; | |
| if (!oh) { | |
| pr_err("%s: Could not look up wdtimer_hwmod\n", __func__); | |
| return -EINVAL; | |
| } | |
| base = omap_hwmod_get_mpu_rt_va(oh); | |
| if (!base) { | |
| pr_err("%s: Could not get the base address for %s\n", | |
| oh->name, __func__); | |
| return -EINVAL; | |
| } | |
| /* sequence required to disable watchdog */ | |
| __raw_writel(0xAAAA, base + OMAP_WDT_SPR); | |
| while (__raw_readl(base + OMAP_WDT_WPS) & 0x10) | |
| cpu_relax(); | |
| __raw_writel(0x5555, base + OMAP_WDT_SPR); | |
| while (__raw_readl(base + OMAP_WDT_WPS) & 0x10) | |
| cpu_relax(); | |
| return 0; | |
| } | |
| /** | |
| * omap2_wdtimer_reset - reset and disable the WDTIMER IP block | |
| * @oh: struct omap_hwmod * | |
| * | |
| * After the WDTIMER IP blocks are reset on OMAP2/3, we must also take | |
| * care to execute the special watchdog disable sequence. This is | |
| * because the watchdog is re-armed upon OCP softreset. (On OMAP4, | |
| * this behavior was apparently changed and the watchdog is no longer | |
| * re-armed after an OCP soft-reset.) Returns -ETIMEDOUT if the reset | |
| * did not complete, or 0 upon success. | |
| * | |
| * XXX Most of this code should be moved to the omap_hwmod.c layer | |
| * during a normal merge window. omap_hwmod_softreset() should be | |
| * renamed to omap_hwmod_set_ocp_softreset(), and omap_hwmod_softreset() | |
| * should call the hwmod _ocp_softreset() code. | |
| */ | |
| int omap2_wd_timer_reset(struct omap_hwmod *oh) | |
| { | |
| int c = 0; | |
| /* Write to the SOFTRESET bit */ | |
| omap_hwmod_softreset(oh); | |
| /* Poll on RESETDONE bit */ | |
| omap_test_timeout((omap_hwmod_read(oh, | |
| oh->class->sysc->syss_offs) | |
| & SYSS_RESETDONE_MASK), | |
| MAX_MODULE_SOFTRESET_WAIT, c); | |
| if (oh->class->sysc->srst_udelay) | |
| udelay(oh->class->sysc->srst_udelay); | |
| if (c == MAX_MODULE_SOFTRESET_WAIT) | |
| pr_warning("%s: %s: softreset failed (waited %d usec)\n", | |
| __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT); | |
| else | |
| pr_debug("%s: %s: softreset in %d usec\n", __func__, | |
| oh->name, c); | |
| return (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : | |
| omap2_wd_timer_disable(oh); | |
| } | |
| static int __init omap_init_wdt(void) | |
| { | |
| int id = -1; | |
| struct platform_device *pdev; | |
| struct omap_hwmod *oh; | |
| char *oh_name = "wd_timer2"; | |
| char *dev_name = "omap_wdt"; | |
| struct omap_wd_timer_platform_data pdata; | |
| if (!cpu_class_is_omap2() || of_have_populated_dt()) | |
| return 0; | |
| oh = omap_hwmod_lookup(oh_name); | |
| if (!oh) { | |
| pr_err("Could not look up wd_timer%d hwmod\n", id); | |
| return -EINVAL; | |
| } | |
| pdata.read_reset_sources = prm_read_reset_sources; | |
| pdev = omap_device_build(dev_name, id, oh, &pdata, | |
| sizeof(struct omap_wd_timer_platform_data)); | |
| WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n", | |
| dev_name, oh->name); | |
| return 0; | |
| } | |
| omap_subsys_initcall(omap_init_wdt); |