| /* |
| * MOXA ART MMC host driver. |
| * |
| * Copyright (C) 2014 Jonas Jensen |
| * |
| * Jonas Jensen <jonas.jensen@gmail.com> |
| * |
| * Based on code from |
| * Moxa Technologies Co., Ltd. <www.moxa.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/blkdev.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmaengine.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/sd.h> |
| #include <linux/sched.h> |
| #include <linux/io.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/clk.h> |
| #include <linux/bitops.h> |
| #include <linux/of_dma.h> |
| #include <linux/spinlock.h> |
| |
| #define REG_COMMAND 0 |
| #define REG_ARGUMENT 4 |
| #define REG_RESPONSE0 8 |
| #define REG_RESPONSE1 12 |
| #define REG_RESPONSE2 16 |
| #define REG_RESPONSE3 20 |
| #define REG_RESPONSE_COMMAND 24 |
| #define REG_DATA_CONTROL 28 |
| #define REG_DATA_TIMER 32 |
| #define REG_DATA_LENGTH 36 |
| #define REG_STATUS 40 |
| #define REG_CLEAR 44 |
| #define REG_INTERRUPT_MASK 48 |
| #define REG_POWER_CONTROL 52 |
| #define REG_CLOCK_CONTROL 56 |
| #define REG_BUS_WIDTH 60 |
| #define REG_DATA_WINDOW 64 |
| #define REG_FEATURE 68 |
| #define REG_REVISION 72 |
| |
| /* REG_COMMAND */ |
| #define CMD_SDC_RESET BIT(10) |
| #define CMD_EN BIT(9) |
| #define CMD_APP_CMD BIT(8) |
| #define CMD_LONG_RSP BIT(7) |
| #define CMD_NEED_RSP BIT(6) |
| #define CMD_IDX_MASK 0x3f |
| |
| /* REG_RESPONSE_COMMAND */ |
| #define RSP_CMD_APP BIT(6) |
| #define RSP_CMD_IDX_MASK 0x3f |
| |
| /* REG_DATA_CONTROL */ |
| #define DCR_DATA_FIFO_RESET BIT(8) |
| #define DCR_DATA_THRES BIT(7) |
| #define DCR_DATA_EN BIT(6) |
| #define DCR_DMA_EN BIT(5) |
| #define DCR_DATA_WRITE BIT(4) |
| #define DCR_BLK_SIZE 0x0f |
| |
| /* REG_DATA_LENGTH */ |
| #define DATA_LEN_MASK 0xffffff |
| |
| /* REG_STATUS */ |
| #define WRITE_PROT BIT(12) |
| #define CARD_DETECT BIT(11) |
| /* 1-10 below can be sent to either registers, interrupt or clear. */ |
| #define CARD_CHANGE BIT(10) |
| #define FIFO_ORUN BIT(9) |
| #define FIFO_URUN BIT(8) |
| #define DATA_END BIT(7) |
| #define CMD_SENT BIT(6) |
| #define DATA_CRC_OK BIT(5) |
| #define RSP_CRC_OK BIT(4) |
| #define DATA_TIMEOUT BIT(3) |
| #define RSP_TIMEOUT BIT(2) |
| #define DATA_CRC_FAIL BIT(1) |
| #define RSP_CRC_FAIL BIT(0) |
| |
| #define MASK_RSP (RSP_TIMEOUT | RSP_CRC_FAIL | \ |
| RSP_CRC_OK | CARD_DETECT | CMD_SENT) |
| |
| #define MASK_DATA (DATA_CRC_OK | DATA_END | \ |
| DATA_CRC_FAIL | DATA_TIMEOUT) |
| |
| #define MASK_INTR_PIO (FIFO_URUN | FIFO_ORUN | CARD_CHANGE) |
| |
| /* REG_POWER_CONTROL */ |
| #define SD_POWER_ON BIT(4) |
| #define SD_POWER_MASK 0x0f |
| |
| /* REG_CLOCK_CONTROL */ |
| #define CLK_HISPD BIT(9) |
| #define CLK_OFF BIT(8) |
| #define CLK_SD BIT(7) |
| #define CLK_DIV_MASK 0x7f |
| |
| /* REG_BUS_WIDTH */ |
| #define BUS_WIDTH_8 BIT(2) |
| #define BUS_WIDTH_4 BIT(1) |
| #define BUS_WIDTH_1 BIT(0) |
| |
| #define MMC_VDD_360 23 |
| #define MIN_POWER (MMC_VDD_360 - SD_POWER_MASK) |
| #define MAX_RETRIES 500000 |
| |
| struct moxart_host { |
| spinlock_t lock; |
| |
| void __iomem *base; |
| |
| phys_addr_t reg_phys; |
| |
| struct dma_chan *dma_chan_tx; |
| struct dma_chan *dma_chan_rx; |
| struct dma_async_tx_descriptor *tx_desc; |
| struct mmc_host *mmc; |
| struct mmc_request *mrq; |
| struct scatterlist *cur_sg; |
| struct completion dma_complete; |
| struct completion pio_complete; |
| |
| u32 num_sg; |
| u32 data_remain; |
| u32 data_len; |
| u32 fifo_width; |
| u32 timeout; |
| u32 rate; |
| |
| long sysclk; |
| |
| bool have_dma; |
| bool is_removed; |
| }; |
| |
| static inline void moxart_init_sg(struct moxart_host *host, |
| struct mmc_data *data) |
| { |
| host->cur_sg = data->sg; |
| host->num_sg = data->sg_len; |
| host->data_remain = host->cur_sg->length; |
| |
| if (host->data_remain > host->data_len) |
| host->data_remain = host->data_len; |
| } |
| |
| static inline int moxart_next_sg(struct moxart_host *host) |
| { |
| int remain; |
| struct mmc_data *data = host->mrq->cmd->data; |
| |
| host->cur_sg++; |
| host->num_sg--; |
| |
| if (host->num_sg > 0) { |
| host->data_remain = host->cur_sg->length; |
| remain = host->data_len - data->bytes_xfered; |
| if (remain > 0 && remain < host->data_remain) |
| host->data_remain = remain; |
| } |
| |
| return host->num_sg; |
| } |
| |
| static int moxart_wait_for_status(struct moxart_host *host, |
| u32 mask, u32 *status) |
| { |
| int ret = -ETIMEDOUT; |
| u32 i; |
| |
| for (i = 0; i < MAX_RETRIES; i++) { |
| *status = readl(host->base + REG_STATUS); |
| if (!(*status & mask)) { |
| udelay(5); |
| continue; |
| } |
| writel(*status & mask, host->base + REG_CLEAR); |
| ret = 0; |
| break; |
| } |
| |
| if (ret) |
| dev_err(mmc_dev(host->mmc), "timed out waiting for status\n"); |
| |
| return ret; |
| } |
| |
| |
| static void moxart_send_command(struct moxart_host *host, |
| struct mmc_command *cmd) |
| { |
| u32 status, cmdctrl; |
| |
| writel(RSP_TIMEOUT | RSP_CRC_OK | |
| RSP_CRC_FAIL | CMD_SENT, host->base + REG_CLEAR); |
| writel(cmd->arg, host->base + REG_ARGUMENT); |
| |
| cmdctrl = cmd->opcode & CMD_IDX_MASK; |
| if (cmdctrl == SD_APP_SET_BUS_WIDTH || cmdctrl == SD_APP_OP_COND || |
| cmdctrl == SD_APP_SEND_SCR || cmdctrl == SD_APP_SD_STATUS || |
| cmdctrl == SD_APP_SEND_NUM_WR_BLKS) |
| cmdctrl |= CMD_APP_CMD; |
| |
| if (cmd->flags & MMC_RSP_PRESENT) |
| cmdctrl |= CMD_NEED_RSP; |
| |
| if (cmd->flags & MMC_RSP_136) |
| cmdctrl |= CMD_LONG_RSP; |
| |
| writel(cmdctrl | CMD_EN, host->base + REG_COMMAND); |
| |
| if (moxart_wait_for_status(host, MASK_RSP, &status) == -ETIMEDOUT) |
| cmd->error = -ETIMEDOUT; |
| |
| if (status & RSP_TIMEOUT) { |
| cmd->error = -ETIMEDOUT; |
| return; |
| } |
| if (status & RSP_CRC_FAIL) { |
| cmd->error = -EIO; |
| return; |
| } |
| if (status & RSP_CRC_OK) { |
| if (cmd->flags & MMC_RSP_136) { |
| cmd->resp[3] = readl(host->base + REG_RESPONSE0); |
| cmd->resp[2] = readl(host->base + REG_RESPONSE1); |
| cmd->resp[1] = readl(host->base + REG_RESPONSE2); |
| cmd->resp[0] = readl(host->base + REG_RESPONSE3); |
| } else { |
| cmd->resp[0] = readl(host->base + REG_RESPONSE0); |
| } |
| } |
| } |
| |
| static void moxart_dma_complete(void *param) |
| { |
| struct moxart_host *host = param; |
| |
| complete(&host->dma_complete); |
| } |
| |
| static void moxart_transfer_dma(struct mmc_data *data, struct moxart_host *host) |
| { |
| u32 len, dir_slave; |
| long dma_time; |
| struct dma_async_tx_descriptor *desc = NULL; |
| struct dma_chan *dma_chan; |
| |
| if (host->data_len == data->bytes_xfered) |
| return; |
| |
| if (data->flags & MMC_DATA_WRITE) { |
| dma_chan = host->dma_chan_tx; |
| dir_slave = DMA_MEM_TO_DEV; |
| } else { |
| dma_chan = host->dma_chan_rx; |
| dir_slave = DMA_DEV_TO_MEM; |
| } |
| |
| len = dma_map_sg(dma_chan->device->dev, data->sg, |
| data->sg_len, mmc_get_dma_dir(data)); |
| |
| if (len > 0) { |
| desc = dmaengine_prep_slave_sg(dma_chan, data->sg, |
| len, dir_slave, |
| DMA_PREP_INTERRUPT | |
| DMA_CTRL_ACK); |
| } else { |
| dev_err(mmc_dev(host->mmc), "dma_map_sg returned zero length\n"); |
| } |
| |
| if (desc) { |
| host->tx_desc = desc; |
| desc->callback = moxart_dma_complete; |
| desc->callback_param = host; |
| dmaengine_submit(desc); |
| dma_async_issue_pending(dma_chan); |
| } |
| |
| data->bytes_xfered += host->data_remain; |
| |
| dma_time = wait_for_completion_interruptible_timeout( |
| &host->dma_complete, host->timeout); |
| |
| dma_unmap_sg(dma_chan->device->dev, |
| data->sg, data->sg_len, |
| mmc_get_dma_dir(data)); |
| } |
| |
| |
| static void moxart_transfer_pio(struct moxart_host *host) |
| { |
| struct mmc_data *data = host->mrq->cmd->data; |
| u32 *sgp, len = 0, remain, status; |
| |
| if (host->data_len == data->bytes_xfered) |
| return; |
| |
| sgp = sg_virt(host->cur_sg); |
| remain = host->data_remain; |
| |
| if (data->flags & MMC_DATA_WRITE) { |
| while (remain > 0) { |
| if (moxart_wait_for_status(host, FIFO_URUN, &status) |
| == -ETIMEDOUT) { |
| data->error = -ETIMEDOUT; |
| complete(&host->pio_complete); |
| return; |
| } |
| for (len = 0; len < remain && len < host->fifo_width;) { |
| iowrite32(*sgp, host->base + REG_DATA_WINDOW); |
| sgp++; |
| len += 4; |
| } |
| remain -= len; |
| } |
| |
| } else { |
| while (remain > 0) { |
| if (moxart_wait_for_status(host, FIFO_ORUN, &status) |
| == -ETIMEDOUT) { |
| data->error = -ETIMEDOUT; |
| complete(&host->pio_complete); |
| return; |
| } |
| for (len = 0; len < remain && len < host->fifo_width;) { |
| /* SCR data must be read in big endian. */ |
| if (data->mrq->cmd->opcode == SD_APP_SEND_SCR) |
| *sgp = ioread32be(host->base + |
| REG_DATA_WINDOW); |
| else |
| *sgp = ioread32(host->base + |
| REG_DATA_WINDOW); |
| sgp++; |
| len += 4; |
| } |
| remain -= len; |
| } |
| } |
| |
| data->bytes_xfered += host->data_remain - remain; |
| host->data_remain = remain; |
| |
| if (host->data_len != data->bytes_xfered) |
| moxart_next_sg(host); |
| else |
| complete(&host->pio_complete); |
| } |
| |
| static void moxart_prepare_data(struct moxart_host *host) |
| { |
| struct mmc_data *data = host->mrq->cmd->data; |
| u32 datactrl; |
| int blksz_bits; |
| |
| if (!data) |
| return; |
| |
| host->data_len = data->blocks * data->blksz; |
| blksz_bits = ffs(data->blksz) - 1; |
| BUG_ON(1 << blksz_bits != data->blksz); |
| |
| moxart_init_sg(host, data); |
| |
| datactrl = DCR_DATA_EN | (blksz_bits & DCR_BLK_SIZE); |
| |
| if (data->flags & MMC_DATA_WRITE) |
| datactrl |= DCR_DATA_WRITE; |
| |
| if ((host->data_len > host->fifo_width) && host->have_dma) |
| datactrl |= DCR_DMA_EN; |
| |
| writel(DCR_DATA_FIFO_RESET, host->base + REG_DATA_CONTROL); |
| writel(MASK_DATA | FIFO_URUN | FIFO_ORUN, host->base + REG_CLEAR); |
| writel(host->rate, host->base + REG_DATA_TIMER); |
| writel(host->data_len, host->base + REG_DATA_LENGTH); |
| writel(datactrl, host->base + REG_DATA_CONTROL); |
| } |
| |
| static void moxart_request(struct mmc_host *mmc, struct mmc_request *mrq) |
| { |
| struct moxart_host *host = mmc_priv(mmc); |
| long pio_time; |
| unsigned long flags; |
| u32 status; |
| |
| spin_lock_irqsave(&host->lock, flags); |
| |
| init_completion(&host->dma_complete); |
| init_completion(&host->pio_complete); |
| |
| host->mrq = mrq; |
| |
| if (readl(host->base + REG_STATUS) & CARD_DETECT) { |
| mrq->cmd->error = -ETIMEDOUT; |
| goto request_done; |
| } |
| |
| moxart_prepare_data(host); |
| moxart_send_command(host, host->mrq->cmd); |
| |
| if (mrq->cmd->data) { |
| if ((host->data_len > host->fifo_width) && host->have_dma) { |
| |
| writel(CARD_CHANGE, host->base + REG_INTERRUPT_MASK); |
| |
| spin_unlock_irqrestore(&host->lock, flags); |
| |
| moxart_transfer_dma(mrq->cmd->data, host); |
| |
| spin_lock_irqsave(&host->lock, flags); |
| } else { |
| |
| writel(MASK_INTR_PIO, host->base + REG_INTERRUPT_MASK); |
| |
| spin_unlock_irqrestore(&host->lock, flags); |
| |
| /* PIO transfers start from interrupt. */ |
| pio_time = wait_for_completion_interruptible_timeout( |
| &host->pio_complete, host->timeout); |
| |
| spin_lock_irqsave(&host->lock, flags); |
| } |
| |
| if (host->is_removed) { |
| dev_err(mmc_dev(host->mmc), "card removed\n"); |
| mrq->cmd->error = -ETIMEDOUT; |
| goto request_done; |
| } |
| |
| if (moxart_wait_for_status(host, MASK_DATA, &status) |
| == -ETIMEDOUT) { |
| mrq->cmd->data->error = -ETIMEDOUT; |
| goto request_done; |
| } |
| |
| if (status & DATA_CRC_FAIL) |
| mrq->cmd->data->error = -ETIMEDOUT; |
| |
| if (mrq->cmd->data->stop) |
| moxart_send_command(host, mrq->cmd->data->stop); |
| } |
| |
| request_done: |
| spin_unlock_irqrestore(&host->lock, flags); |
| mmc_request_done(host->mmc, mrq); |
| } |
| |
| static irqreturn_t moxart_irq(int irq, void *devid) |
| { |
| struct moxart_host *host = (struct moxart_host *)devid; |
| u32 status; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&host->lock, flags); |
| |
| status = readl(host->base + REG_STATUS); |
| if (status & CARD_CHANGE) { |
| host->is_removed = status & CARD_DETECT; |
| if (host->is_removed && host->have_dma) { |
| dmaengine_terminate_all(host->dma_chan_tx); |
| dmaengine_terminate_all(host->dma_chan_rx); |
| } |
| host->mrq = NULL; |
| writel(MASK_INTR_PIO, host->base + REG_CLEAR); |
| writel(CARD_CHANGE, host->base + REG_INTERRUPT_MASK); |
| mmc_detect_change(host->mmc, 0); |
| } |
| if (status & (FIFO_ORUN | FIFO_URUN) && host->mrq) |
| moxart_transfer_pio(host); |
| |
| spin_unlock_irqrestore(&host->lock, flags); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void moxart_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) |
| { |
| struct moxart_host *host = mmc_priv(mmc); |
| unsigned long flags; |
| u8 power, div; |
| u32 ctrl; |
| |
| spin_lock_irqsave(&host->lock, flags); |
| |
| if (ios->clock) { |
| for (div = 0; div < CLK_DIV_MASK; ++div) { |
| if (ios->clock >= host->sysclk / (2 * (div + 1))) |
| break; |
| } |
| ctrl = CLK_SD | div; |
| host->rate = host->sysclk / (2 * (div + 1)); |
| if (host->rate > host->sysclk) |
| ctrl |= CLK_HISPD; |
| writel(ctrl, host->base + REG_CLOCK_CONTROL); |
| } |
| |
| if (ios->power_mode == MMC_POWER_OFF) { |
| writel(readl(host->base + REG_POWER_CONTROL) & ~SD_POWER_ON, |
| host->base + REG_POWER_CONTROL); |
| } else { |
| if (ios->vdd < MIN_POWER) |
| power = 0; |
| else |
| power = ios->vdd - MIN_POWER; |
| |
| writel(SD_POWER_ON | (u32) power, |
| host->base + REG_POWER_CONTROL); |
| } |
| |
| switch (ios->bus_width) { |
| case MMC_BUS_WIDTH_4: |
| writel(BUS_WIDTH_4, host->base + REG_BUS_WIDTH); |
| break; |
| case MMC_BUS_WIDTH_8: |
| writel(BUS_WIDTH_8, host->base + REG_BUS_WIDTH); |
| break; |
| default: |
| writel(BUS_WIDTH_1, host->base + REG_BUS_WIDTH); |
| break; |
| } |
| |
| spin_unlock_irqrestore(&host->lock, flags); |
| } |
| |
| |
| static int moxart_get_ro(struct mmc_host *mmc) |
| { |
| struct moxart_host *host = mmc_priv(mmc); |
| |
| return !!(readl(host->base + REG_STATUS) & WRITE_PROT); |
| } |
| |
| static const struct mmc_host_ops moxart_ops = { |
| .request = moxart_request, |
| .set_ios = moxart_set_ios, |
| .get_ro = moxart_get_ro, |
| }; |
| |
| static int moxart_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *node = dev->of_node; |
| struct resource res_mmc; |
| struct mmc_host *mmc; |
| struct moxart_host *host = NULL; |
| struct dma_slave_config cfg; |
| struct clk *clk; |
| void __iomem *reg_mmc; |
| int irq, ret; |
| u32 i; |
| |
| mmc = mmc_alloc_host(sizeof(struct moxart_host), dev); |
| if (!mmc) { |
| dev_err(dev, "mmc_alloc_host failed\n"); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| ret = of_address_to_resource(node, 0, &res_mmc); |
| if (ret) { |
| dev_err(dev, "of_address_to_resource failed\n"); |
| goto out; |
| } |
| |
| irq = irq_of_parse_and_map(node, 0); |
| if (irq <= 0) { |
| dev_err(dev, "irq_of_parse_and_map failed\n"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| clk = devm_clk_get(dev, NULL); |
| if (IS_ERR(clk)) { |
| ret = PTR_ERR(clk); |
| goto out; |
| } |
| |
| reg_mmc = devm_ioremap_resource(dev, &res_mmc); |
| if (IS_ERR(reg_mmc)) { |
| ret = PTR_ERR(reg_mmc); |
| goto out; |
| } |
| |
| ret = mmc_of_parse(mmc); |
| if (ret) |
| goto out; |
| |
| host = mmc_priv(mmc); |
| host->mmc = mmc; |
| host->base = reg_mmc; |
| host->reg_phys = res_mmc.start; |
| host->timeout = msecs_to_jiffies(1000); |
| host->sysclk = clk_get_rate(clk); |
| host->fifo_width = readl(host->base + REG_FEATURE) << 2; |
| host->dma_chan_tx = dma_request_slave_channel_reason(dev, "tx"); |
| host->dma_chan_rx = dma_request_slave_channel_reason(dev, "rx"); |
| |
| spin_lock_init(&host->lock); |
| |
| mmc->ops = &moxart_ops; |
| mmc->f_max = DIV_ROUND_CLOSEST(host->sysclk, 2); |
| mmc->f_min = DIV_ROUND_CLOSEST(host->sysclk, CLK_DIV_MASK * 2); |
| mmc->ocr_avail = 0xffff00; /* Support 2.0v - 3.6v power. */ |
| |
| if (IS_ERR(host->dma_chan_tx) || IS_ERR(host->dma_chan_rx)) { |
| if (PTR_ERR(host->dma_chan_tx) == -EPROBE_DEFER || |
| PTR_ERR(host->dma_chan_rx) == -EPROBE_DEFER) { |
| ret = -EPROBE_DEFER; |
| goto out; |
| } |
| dev_dbg(dev, "PIO mode transfer enabled\n"); |
| host->have_dma = false; |
| } else { |
| dev_dbg(dev, "DMA channels found (%p,%p)\n", |
| host->dma_chan_tx, host->dma_chan_rx); |
| host->have_dma = true; |
| |
| cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; |
| cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; |
| |
| cfg.direction = DMA_MEM_TO_DEV; |
| cfg.src_addr = 0; |
| cfg.dst_addr = host->reg_phys + REG_DATA_WINDOW; |
| dmaengine_slave_config(host->dma_chan_tx, &cfg); |
| |
| cfg.direction = DMA_DEV_TO_MEM; |
| cfg.src_addr = host->reg_phys + REG_DATA_WINDOW; |
| cfg.dst_addr = 0; |
| dmaengine_slave_config(host->dma_chan_rx, &cfg); |
| } |
| |
| switch ((readl(host->base + REG_BUS_WIDTH) >> 3) & 3) { |
| case 1: |
| mmc->caps |= MMC_CAP_4_BIT_DATA; |
| break; |
| case 2: |
| mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; |
| break; |
| default: |
| break; |
| } |
| |
| writel(0, host->base + REG_INTERRUPT_MASK); |
| |
| writel(CMD_SDC_RESET, host->base + REG_COMMAND); |
| for (i = 0; i < MAX_RETRIES; i++) { |
| if (!(readl(host->base + REG_COMMAND) & CMD_SDC_RESET)) |
| break; |
| udelay(5); |
| } |
| |
| ret = devm_request_irq(dev, irq, moxart_irq, 0, "moxart-mmc", host); |
| if (ret) |
| goto out; |
| |
| dev_set_drvdata(dev, mmc); |
| mmc_add_host(mmc); |
| |
| dev_dbg(dev, "IRQ=%d, FIFO is %d bytes\n", irq, host->fifo_width); |
| |
| return 0; |
| |
| out: |
| if (mmc) |
| mmc_free_host(mmc); |
| return ret; |
| } |
| |
| static int moxart_remove(struct platform_device *pdev) |
| { |
| struct mmc_host *mmc = dev_get_drvdata(&pdev->dev); |
| struct moxart_host *host = mmc_priv(mmc); |
| |
| dev_set_drvdata(&pdev->dev, NULL); |
| |
| if (mmc) { |
| if (!IS_ERR(host->dma_chan_tx)) |
| dma_release_channel(host->dma_chan_tx); |
| if (!IS_ERR(host->dma_chan_rx)) |
| dma_release_channel(host->dma_chan_rx); |
| mmc_remove_host(mmc); |
| mmc_free_host(mmc); |
| |
| writel(0, host->base + REG_INTERRUPT_MASK); |
| writel(0, host->base + REG_POWER_CONTROL); |
| writel(readl(host->base + REG_CLOCK_CONTROL) | CLK_OFF, |
| host->base + REG_CLOCK_CONTROL); |
| } |
| return 0; |
| } |
| |
| static const struct of_device_id moxart_mmc_match[] = { |
| { .compatible = "moxa,moxart-mmc" }, |
| { .compatible = "faraday,ftsdc010" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, moxart_mmc_match); |
| |
| static struct platform_driver moxart_mmc_driver = { |
| .probe = moxart_probe, |
| .remove = moxart_remove, |
| .driver = { |
| .name = "mmc-moxart", |
| .of_match_table = moxart_mmc_match, |
| }, |
| }; |
| module_platform_driver(moxart_mmc_driver); |
| |
| MODULE_ALIAS("platform:mmc-moxart"); |
| MODULE_DESCRIPTION("MOXA ART MMC driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>"); |