| /* |
| * Driver for MMC and SSD cards for Cavium ThunderX SOCs. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2016 Cavium Inc. |
| */ |
| #include <linux/device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/interrupt.h> |
| #include <linux/mmc/mmc.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/pci.h> |
| #include "cavium.h" |
| |
| static void thunder_mmc_acquire_bus(struct cvm_mmc_host *host) |
| { |
| down(&host->mmc_serializer); |
| } |
| |
| static void thunder_mmc_release_bus(struct cvm_mmc_host *host) |
| { |
| up(&host->mmc_serializer); |
| } |
| |
| static void thunder_mmc_int_enable(struct cvm_mmc_host *host, u64 val) |
| { |
| writeq(val, host->base + MIO_EMM_INT(host)); |
| writeq(val, host->base + MIO_EMM_INT_EN_SET(host)); |
| } |
| |
| static int thunder_mmc_register_interrupts(struct cvm_mmc_host *host, |
| struct pci_dev *pdev) |
| { |
| int nvec, ret, i; |
| |
| nvec = pci_alloc_irq_vectors(pdev, 1, 9, PCI_IRQ_MSIX); |
| if (nvec < 0) |
| return nvec; |
| |
| /* register interrupts */ |
| for (i = 0; i < nvec; i++) { |
| ret = devm_request_irq(&pdev->dev, pci_irq_vector(pdev, i), |
| cvm_mmc_interrupt, |
| 0, cvm_mmc_irq_names[i], host); |
| if (ret) |
| return ret; |
| } |
| return 0; |
| } |
| |
| static int thunder_mmc_probe(struct pci_dev *pdev, |
| const struct pci_device_id *id) |
| { |
| struct device_node *node = pdev->dev.of_node; |
| struct device *dev = &pdev->dev; |
| struct device_node *child_node; |
| struct cvm_mmc_host *host; |
| int ret, i = 0; |
| |
| host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); |
| if (!host) |
| return -ENOMEM; |
| |
| pci_set_drvdata(pdev, host); |
| ret = pcim_enable_device(pdev); |
| if (ret) |
| return ret; |
| |
| ret = pci_request_regions(pdev, KBUILD_MODNAME); |
| if (ret) |
| return ret; |
| |
| host->base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0)); |
| if (!host->base) |
| return -EINVAL; |
| |
| /* On ThunderX these are identical */ |
| host->dma_base = host->base; |
| |
| host->reg_off = 0x2000; |
| host->reg_off_dma = 0x160; |
| |
| host->clk = devm_clk_get(dev, NULL); |
| if (IS_ERR(host->clk)) |
| return PTR_ERR(host->clk); |
| |
| ret = clk_prepare_enable(host->clk); |
| if (ret) |
| return ret; |
| host->sys_freq = clk_get_rate(host->clk); |
| |
| spin_lock_init(&host->irq_handler_lock); |
| sema_init(&host->mmc_serializer, 1); |
| |
| host->dev = dev; |
| host->acquire_bus = thunder_mmc_acquire_bus; |
| host->release_bus = thunder_mmc_release_bus; |
| host->int_enable = thunder_mmc_int_enable; |
| |
| host->use_sg = true; |
| host->big_dma_addr = true; |
| host->need_irq_handler_lock = true; |
| host->last_slot = -1; |
| |
| ret = dma_set_mask(dev, DMA_BIT_MASK(48)); |
| if (ret) |
| goto error; |
| |
| /* |
| * Clear out any pending interrupts that may be left over from |
| * bootloader. Writing 1 to the bits clears them. |
| */ |
| writeq(127, host->base + MIO_EMM_INT_EN(host)); |
| writeq(3, host->base + MIO_EMM_DMA_INT_ENA_W1C(host)); |
| /* Clear DMA FIFO */ |
| writeq(BIT_ULL(16), host->base + MIO_EMM_DMA_FIFO_CFG(host)); |
| |
| ret = thunder_mmc_register_interrupts(host, pdev); |
| if (ret) |
| goto error; |
| |
| for_each_child_of_node(node, child_node) { |
| /* |
| * mmc_of_parse and devm* require one device per slot. |
| * Create a dummy device per slot and set the node pointer to |
| * the slot. The easiest way to get this is using |
| * of_platform_device_create. |
| */ |
| if (of_device_is_compatible(child_node, "mmc-slot")) { |
| host->slot_pdev[i] = of_platform_device_create(child_node, NULL, |
| &pdev->dev); |
| if (!host->slot_pdev[i]) |
| continue; |
| |
| ret = cvm_mmc_of_slot_probe(&host->slot_pdev[i]->dev, host); |
| if (ret) |
| goto error; |
| } |
| i++; |
| } |
| dev_info(dev, "probed\n"); |
| return 0; |
| |
| error: |
| for (i = 0; i < CAVIUM_MAX_MMC; i++) { |
| if (host->slot[i]) |
| cvm_mmc_of_slot_remove(host->slot[i]); |
| if (host->slot_pdev[i]) { |
| get_device(&host->slot_pdev[i]->dev); |
| of_platform_device_destroy(&host->slot_pdev[i]->dev, NULL); |
| put_device(&host->slot_pdev[i]->dev); |
| } |
| } |
| clk_disable_unprepare(host->clk); |
| return ret; |
| } |
| |
| static void thunder_mmc_remove(struct pci_dev *pdev) |
| { |
| struct cvm_mmc_host *host = pci_get_drvdata(pdev); |
| u64 dma_cfg; |
| int i; |
| |
| for (i = 0; i < CAVIUM_MAX_MMC; i++) |
| if (host->slot[i]) |
| cvm_mmc_of_slot_remove(host->slot[i]); |
| |
| dma_cfg = readq(host->dma_base + MIO_EMM_DMA_CFG(host)); |
| dma_cfg &= ~MIO_EMM_DMA_CFG_EN; |
| writeq(dma_cfg, host->dma_base + MIO_EMM_DMA_CFG(host)); |
| |
| clk_disable_unprepare(host->clk); |
| } |
| |
| static const struct pci_device_id thunder_mmc_id_table[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xa010) }, |
| { 0, } /* end of table */ |
| }; |
| |
| static struct pci_driver thunder_mmc_driver = { |
| .name = KBUILD_MODNAME, |
| .id_table = thunder_mmc_id_table, |
| .probe = thunder_mmc_probe, |
| .remove = thunder_mmc_remove, |
| }; |
| |
| module_pci_driver(thunder_mmc_driver); |
| |
| MODULE_AUTHOR("Cavium Inc."); |
| MODULE_DESCRIPTION("Cavium ThunderX eMMC Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DEVICE_TABLE(pci, thunder_mmc_id_table); |