| /* | 
 |  *  64-bit pSeries and RS/6000 setup code. | 
 |  * | 
 |  *  Copyright (C) 1995  Linus Torvalds | 
 |  *  Adapted from 'alpha' version by Gary Thomas | 
 |  *  Modified by Cort Dougan (cort@cs.nmt.edu) | 
 |  *  Modified by PPC64 Team, IBM Corp | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * as published by the Free Software Foundation; either version | 
 |  * 2 of the License, or (at your option) any later version. | 
 |  */ | 
 |  | 
 | /* | 
 |  * bootup setup stuff.. | 
 |  */ | 
 |  | 
 | #include <linux/cpu.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/stddef.h> | 
 | #include <linux/unistd.h> | 
 | #include <linux/user.h> | 
 | #include <linux/tty.h> | 
 | #include <linux/major.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/reboot.h> | 
 | #include <linux/init.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/console.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/utsname.h> | 
 | #include <linux/adb.h> | 
 | #include <linux/module.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/irq.h> | 
 | #include <linux/seq_file.h> | 
 | #include <linux/root_dev.h> | 
 |  | 
 | #include <asm/mmu.h> | 
 | #include <asm/processor.h> | 
 | #include <asm/io.h> | 
 | #include <asm/pgtable.h> | 
 | #include <asm/prom.h> | 
 | #include <asm/rtas.h> | 
 | #include <asm/pci-bridge.h> | 
 | #include <asm/iommu.h> | 
 | #include <asm/dma.h> | 
 | #include <asm/machdep.h> | 
 | #include <asm/irq.h> | 
 | #include <asm/time.h> | 
 | #include <asm/nvram.h> | 
 | #include <asm/pmc.h> | 
 | #include <asm/mpic.h> | 
 | #include <asm/xics.h> | 
 | #include <asm/ppc-pci.h> | 
 | #include <asm/i8259.h> | 
 | #include <asm/udbg.h> | 
 | #include <asm/smp.h> | 
 | #include <asm/firmware.h> | 
 | #include <asm/eeh.h> | 
 | #include <asm/pSeries_reconfig.h> | 
 |  | 
 | #include "plpar_wrappers.h" | 
 | #include "pseries.h" | 
 |  | 
 | int CMO_PrPSP = -1; | 
 | int CMO_SecPSP = -1; | 
 | unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT); | 
 | EXPORT_SYMBOL(CMO_PageSize); | 
 |  | 
 | int fwnmi_active;  /* TRUE if an FWNMI handler is present */ | 
 |  | 
 | static void pseries_shared_idle_sleep(void); | 
 | static void pseries_dedicated_idle_sleep(void); | 
 |  | 
 | static struct device_node *pSeries_mpic_node; | 
 |  | 
 | static void pSeries_show_cpuinfo(struct seq_file *m) | 
 | { | 
 | 	struct device_node *root; | 
 | 	const char *model = ""; | 
 |  | 
 | 	root = of_find_node_by_path("/"); | 
 | 	if (root) | 
 | 		model = of_get_property(root, "model", NULL); | 
 | 	seq_printf(m, "machine\t\t: CHRP %s\n", model); | 
 | 	of_node_put(root); | 
 | } | 
 |  | 
 | /* Initialize firmware assisted non-maskable interrupts if | 
 |  * the firmware supports this feature. | 
 |  */ | 
 | static void __init fwnmi_init(void) | 
 | { | 
 | 	unsigned long system_reset_addr, machine_check_addr; | 
 |  | 
 | 	int ibm_nmi_register = rtas_token("ibm,nmi-register"); | 
 | 	if (ibm_nmi_register == RTAS_UNKNOWN_SERVICE) | 
 | 		return; | 
 |  | 
 | 	/* If the kernel's not linked at zero we point the firmware at low | 
 | 	 * addresses anyway, and use a trampoline to get to the real code. */ | 
 | 	system_reset_addr  = __pa(system_reset_fwnmi) - PHYSICAL_START; | 
 | 	machine_check_addr = __pa(machine_check_fwnmi) - PHYSICAL_START; | 
 |  | 
 | 	if (0 == rtas_call(ibm_nmi_register, 2, 1, NULL, system_reset_addr, | 
 | 				machine_check_addr)) | 
 | 		fwnmi_active = 1; | 
 | } | 
 |  | 
 | static void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc) | 
 | { | 
 | 	struct irq_chip *chip = irq_desc_get_chip(desc); | 
 | 	unsigned int cascade_irq = i8259_irq(); | 
 |  | 
 | 	if (cascade_irq != NO_IRQ) | 
 | 		generic_handle_irq(cascade_irq); | 
 |  | 
 | 	chip->irq_eoi(&desc->irq_data); | 
 | } | 
 |  | 
 | static void __init pseries_setup_i8259_cascade(void) | 
 | { | 
 | 	struct device_node *np, *old, *found = NULL; | 
 | 	unsigned int cascade; | 
 | 	const u32 *addrp; | 
 | 	unsigned long intack = 0; | 
 | 	int naddr; | 
 |  | 
 | 	for_each_node_by_type(np, "interrupt-controller") { | 
 | 		if (of_device_is_compatible(np, "chrp,iic")) { | 
 | 			found = np; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (found == NULL) { | 
 | 		printk(KERN_DEBUG "pic: no ISA interrupt controller\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	cascade = irq_of_parse_and_map(found, 0); | 
 | 	if (cascade == NO_IRQ) { | 
 | 		printk(KERN_ERR "pic: failed to map cascade interrupt"); | 
 | 		return; | 
 | 	} | 
 | 	pr_debug("pic: cascade mapped to irq %d\n", cascade); | 
 |  | 
 | 	for (old = of_node_get(found); old != NULL ; old = np) { | 
 | 		np = of_get_parent(old); | 
 | 		of_node_put(old); | 
 | 		if (np == NULL) | 
 | 			break; | 
 | 		if (strcmp(np->name, "pci") != 0) | 
 | 			continue; | 
 | 		addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL); | 
 | 		if (addrp == NULL) | 
 | 			continue; | 
 | 		naddr = of_n_addr_cells(np); | 
 | 		intack = addrp[naddr-1]; | 
 | 		if (naddr > 1) | 
 | 			intack |= ((unsigned long)addrp[naddr-2]) << 32; | 
 | 	} | 
 | 	if (intack) | 
 | 		printk(KERN_DEBUG "pic: PCI 8259 intack at 0x%016lx\n", intack); | 
 | 	i8259_init(found, intack); | 
 | 	of_node_put(found); | 
 | 	irq_set_chained_handler(cascade, pseries_8259_cascade); | 
 | } | 
 |  | 
 | static void __init pseries_mpic_init_IRQ(void) | 
 | { | 
 | 	struct device_node *np; | 
 | 	const unsigned int *opprop; | 
 | 	unsigned long openpic_addr = 0; | 
 | 	int naddr, n, i, opplen; | 
 | 	struct mpic *mpic; | 
 |  | 
 | 	np = of_find_node_by_path("/"); | 
 | 	naddr = of_n_addr_cells(np); | 
 | 	opprop = of_get_property(np, "platform-open-pic", &opplen); | 
 | 	if (opprop != 0) { | 
 | 		openpic_addr = of_read_number(opprop, naddr); | 
 | 		printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr); | 
 | 	} | 
 | 	of_node_put(np); | 
 |  | 
 | 	BUG_ON(openpic_addr == 0); | 
 |  | 
 | 	/* Setup the openpic driver */ | 
 | 	mpic = mpic_alloc(pSeries_mpic_node, openpic_addr, | 
 | 			  MPIC_PRIMARY, | 
 | 			  16, 250, /* isu size, irq count */ | 
 | 			  " MPIC     "); | 
 | 	BUG_ON(mpic == NULL); | 
 |  | 
 | 	/* Add ISUs */ | 
 | 	opplen /= sizeof(u32); | 
 | 	for (n = 0, i = naddr; i < opplen; i += naddr, n++) { | 
 | 		unsigned long isuaddr = of_read_number(opprop + i, naddr); | 
 | 		mpic_assign_isu(mpic, n, isuaddr); | 
 | 	} | 
 |  | 
 | 	/* Setup top-level get_irq */ | 
 | 	ppc_md.get_irq = mpic_get_irq; | 
 |  | 
 | 	/* All ISUs are setup, complete initialization */ | 
 | 	mpic_init(mpic); | 
 |  | 
 | 	/* Look for cascade */ | 
 | 	pseries_setup_i8259_cascade(); | 
 | } | 
 |  | 
 | static void __init pseries_xics_init_IRQ(void) | 
 | { | 
 | 	xics_init(); | 
 | 	pseries_setup_i8259_cascade(); | 
 | } | 
 |  | 
 | static void pseries_lpar_enable_pmcs(void) | 
 | { | 
 | 	unsigned long set, reset; | 
 |  | 
 | 	set = 1UL << 63; | 
 | 	reset = 0; | 
 | 	plpar_hcall_norets(H_PERFMON, set, reset); | 
 | } | 
 |  | 
 | static void __init pseries_discover_pic(void) | 
 | { | 
 | 	struct device_node *np; | 
 | 	const char *typep; | 
 |  | 
 | 	for (np = NULL; (np = of_find_node_by_name(np, | 
 | 						   "interrupt-controller"));) { | 
 | 		typep = of_get_property(np, "compatible", NULL); | 
 | 		if (strstr(typep, "open-pic")) { | 
 | 			pSeries_mpic_node = of_node_get(np); | 
 | 			ppc_md.init_IRQ       = pseries_mpic_init_IRQ; | 
 | 			setup_kexec_cpu_down_mpic(); | 
 | 			smp_init_pseries_mpic(); | 
 | 			return; | 
 | 		} else if (strstr(typep, "ppc-xicp")) { | 
 | 			ppc_md.init_IRQ       = pseries_xics_init_IRQ; | 
 | 			setup_kexec_cpu_down_xics(); | 
 | 			smp_init_pseries_xics(); | 
 | 			return; | 
 | 		} | 
 | 	} | 
 | 	printk(KERN_ERR "pSeries_discover_pic: failed to recognize" | 
 | 	       " interrupt-controller\n"); | 
 | } | 
 |  | 
 | static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) | 
 | { | 
 | 	struct device_node *np = node; | 
 | 	struct pci_dn *pci = NULL; | 
 | 	int err = NOTIFY_OK; | 
 |  | 
 | 	switch (action) { | 
 | 	case PSERIES_RECONFIG_ADD: | 
 | 		pci = np->parent->data; | 
 | 		if (pci) | 
 | 			update_dn_pci_info(np, pci->phb); | 
 | 		break; | 
 | 	default: | 
 | 		err = NOTIFY_DONE; | 
 | 		break; | 
 | 	} | 
 | 	return err; | 
 | } | 
 |  | 
 | static struct notifier_block pci_dn_reconfig_nb = { | 
 | 	.notifier_call = pci_dn_reconfig_notifier, | 
 | }; | 
 |  | 
 | struct kmem_cache *dtl_cache; | 
 |  | 
 | #ifdef CONFIG_VIRT_CPU_ACCOUNTING | 
 | /* | 
 |  * Allocate space for the dispatch trace log for all possible cpus | 
 |  * and register the buffers with the hypervisor.  This is used for | 
 |  * computing time stolen by the hypervisor. | 
 |  */ | 
 | static int alloc_dispatch_logs(void) | 
 | { | 
 | 	int cpu, ret; | 
 | 	struct paca_struct *pp; | 
 | 	struct dtl_entry *dtl; | 
 |  | 
 | 	if (!firmware_has_feature(FW_FEATURE_SPLPAR)) | 
 | 		return 0; | 
 |  | 
 | 	if (!dtl_cache) | 
 | 		return 0; | 
 |  | 
 | 	for_each_possible_cpu(cpu) { | 
 | 		pp = &paca[cpu]; | 
 | 		dtl = kmem_cache_alloc(dtl_cache, GFP_KERNEL); | 
 | 		if (!dtl) { | 
 | 			pr_warn("Failed to allocate dispatch trace log for cpu %d\n", | 
 | 				cpu); | 
 | 			pr_warn("Stolen time statistics will be unreliable\n"); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		pp->dtl_ridx = 0; | 
 | 		pp->dispatch_log = dtl; | 
 | 		pp->dispatch_log_end = dtl + N_DISPATCH_LOG; | 
 | 		pp->dtl_curr = dtl; | 
 | 	} | 
 |  | 
 | 	/* Register the DTL for the current (boot) cpu */ | 
 | 	dtl = get_paca()->dispatch_log; | 
 | 	get_paca()->dtl_ridx = 0; | 
 | 	get_paca()->dtl_curr = dtl; | 
 | 	get_paca()->lppaca_ptr->dtl_idx = 0; | 
 |  | 
 | 	/* hypervisor reads buffer length from this field */ | 
 | 	dtl->enqueue_to_dispatch_time = DISPATCH_LOG_BYTES; | 
 | 	ret = register_dtl(hard_smp_processor_id(), __pa(dtl)); | 
 | 	if (ret) | 
 | 		pr_warn("DTL registration failed for boot cpu %d (%d)\n", | 
 | 			smp_processor_id(), ret); | 
 | 	get_paca()->lppaca_ptr->dtl_enable_mask = 2; | 
 |  | 
 | 	return 0; | 
 | } | 
 | #else /* !CONFIG_VIRT_CPU_ACCOUNTING */ | 
 | static inline int alloc_dispatch_logs(void) | 
 | { | 
 | 	return 0; | 
 | } | 
 | #endif /* CONFIG_VIRT_CPU_ACCOUNTING */ | 
 |  | 
 | static int alloc_dispatch_log_kmem_cache(void) | 
 | { | 
 | 	dtl_cache = kmem_cache_create("dtl", DISPATCH_LOG_BYTES, | 
 | 						DISPATCH_LOG_BYTES, 0, NULL); | 
 | 	if (!dtl_cache) { | 
 | 		pr_warn("Failed to create dispatch trace log buffer cache\n"); | 
 | 		pr_warn("Stolen time statistics will be unreliable\n"); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return alloc_dispatch_logs(); | 
 | } | 
 | early_initcall(alloc_dispatch_log_kmem_cache); | 
 |  | 
 | static void __init pSeries_setup_arch(void) | 
 | { | 
 | 	/* Discover PIC type and setup ppc_md accordingly */ | 
 | 	pseries_discover_pic(); | 
 |  | 
 | 	/* openpic global configuration register (64-bit format). */ | 
 | 	/* openpic Interrupt Source Unit pointer (64-bit format). */ | 
 | 	/* python0 facility area (mmio) (64-bit format) REAL address. */ | 
 |  | 
 | 	/* init to some ~sane value until calibrate_delay() runs */ | 
 | 	loops_per_jiffy = 50000000; | 
 |  | 
 | 	fwnmi_init(); | 
 |  | 
 | 	/* Find and initialize PCI host bridges */ | 
 | 	init_pci_config_tokens(); | 
 | 	find_and_init_phbs(); | 
 | 	pSeries_reconfig_notifier_register(&pci_dn_reconfig_nb); | 
 | 	eeh_init(); | 
 |  | 
 | 	pSeries_nvram_init(); | 
 |  | 
 | 	/* Choose an idle loop */ | 
 | 	if (firmware_has_feature(FW_FEATURE_SPLPAR)) { | 
 | 		vpa_init(boot_cpuid); | 
 | 		if (get_lppaca()->shared_proc) { | 
 | 			printk(KERN_DEBUG "Using shared processor idle loop\n"); | 
 | 			ppc_md.power_save = pseries_shared_idle_sleep; | 
 | 		} else { | 
 | 			printk(KERN_DEBUG "Using dedicated idle loop\n"); | 
 | 			ppc_md.power_save = pseries_dedicated_idle_sleep; | 
 | 		} | 
 | 	} else { | 
 | 		printk(KERN_DEBUG "Using default idle loop\n"); | 
 | 	} | 
 |  | 
 | 	if (firmware_has_feature(FW_FEATURE_LPAR)) | 
 | 		ppc_md.enable_pmcs = pseries_lpar_enable_pmcs; | 
 | 	else | 
 | 		ppc_md.enable_pmcs = power4_enable_pmcs; | 
 | } | 
 |  | 
 | static int __init pSeries_init_panel(void) | 
 | { | 
 | 	/* Manually leave the kernel version on the panel. */ | 
 | 	ppc_md.progress("Linux ppc64\n", 0); | 
 | 	ppc_md.progress(init_utsname()->version, 0); | 
 |  | 
 | 	return 0; | 
 | } | 
 | machine_arch_initcall(pseries, pSeries_init_panel); | 
 |  | 
 | static int pseries_set_dabr(unsigned long dabr) | 
 | { | 
 | 	return plpar_hcall_norets(H_SET_DABR, dabr); | 
 | } | 
 |  | 
 | static int pseries_set_xdabr(unsigned long dabr) | 
 | { | 
 | 	/* We want to catch accesses from kernel and userspace */ | 
 | 	return plpar_hcall_norets(H_SET_XDABR, dabr, | 
 | 			H_DABRX_KERNEL | H_DABRX_USER); | 
 | } | 
 |  | 
 | #define CMO_CHARACTERISTICS_TOKEN 44 | 
 | #define CMO_MAXLENGTH 1026 | 
 |  | 
 | void pSeries_coalesce_init(void) | 
 | { | 
 | 	struct hvcall_mpp_x_data mpp_x_data; | 
 |  | 
 | 	if (firmware_has_feature(FW_FEATURE_CMO) && !h_get_mpp_x(&mpp_x_data)) | 
 | 		powerpc_firmware_features |= FW_FEATURE_XCMO; | 
 | 	else | 
 | 		powerpc_firmware_features &= ~FW_FEATURE_XCMO; | 
 | } | 
 |  | 
 | /** | 
 |  * fw_cmo_feature_init - FW_FEATURE_CMO is not stored in ibm,hypertas-functions, | 
 |  * handle that here. (Stolen from parse_system_parameter_string) | 
 |  */ | 
 | void pSeries_cmo_feature_init(void) | 
 | { | 
 | 	char *ptr, *key, *value, *end; | 
 | 	int call_status; | 
 | 	int page_order = IOMMU_PAGE_SHIFT; | 
 |  | 
 | 	pr_debug(" -> fw_cmo_feature_init()\n"); | 
 | 	spin_lock(&rtas_data_buf_lock); | 
 | 	memset(rtas_data_buf, 0, RTAS_DATA_BUF_SIZE); | 
 | 	call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1, | 
 | 				NULL, | 
 | 				CMO_CHARACTERISTICS_TOKEN, | 
 | 				__pa(rtas_data_buf), | 
 | 				RTAS_DATA_BUF_SIZE); | 
 |  | 
 | 	if (call_status != 0) { | 
 | 		spin_unlock(&rtas_data_buf_lock); | 
 | 		pr_debug("CMO not available\n"); | 
 | 		pr_debug(" <- fw_cmo_feature_init()\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	end = rtas_data_buf + CMO_MAXLENGTH - 2; | 
 | 	ptr = rtas_data_buf + 2;	/* step over strlen value */ | 
 | 	key = value = ptr; | 
 |  | 
 | 	while (*ptr && (ptr <= end)) { | 
 | 		/* Separate the key and value by replacing '=' with '\0' and | 
 | 		 * point the value at the string after the '=' | 
 | 		 */ | 
 | 		if (ptr[0] == '=') { | 
 | 			ptr[0] = '\0'; | 
 | 			value = ptr + 1; | 
 | 		} else if (ptr[0] == '\0' || ptr[0] == ',') { | 
 | 			/* Terminate the string containing the key/value pair */ | 
 | 			ptr[0] = '\0'; | 
 |  | 
 | 			if (key == value) { | 
 | 				pr_debug("Malformed key/value pair\n"); | 
 | 				/* Never found a '=', end processing */ | 
 | 				break; | 
 | 			} | 
 |  | 
 | 			if (0 == strcmp(key, "CMOPageSize")) | 
 | 				page_order = simple_strtol(value, NULL, 10); | 
 | 			else if (0 == strcmp(key, "PrPSP")) | 
 | 				CMO_PrPSP = simple_strtol(value, NULL, 10); | 
 | 			else if (0 == strcmp(key, "SecPSP")) | 
 | 				CMO_SecPSP = simple_strtol(value, NULL, 10); | 
 | 			value = key = ptr + 1; | 
 | 		} | 
 | 		ptr++; | 
 | 	} | 
 |  | 
 | 	/* Page size is returned as the power of 2 of the page size, | 
 | 	 * convert to the page size in bytes before returning | 
 | 	 */ | 
 | 	CMO_PageSize = 1 << page_order; | 
 | 	pr_debug("CMO_PageSize = %lu\n", CMO_PageSize); | 
 |  | 
 | 	if (CMO_PrPSP != -1 || CMO_SecPSP != -1) { | 
 | 		pr_info("CMO enabled\n"); | 
 | 		pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP, | 
 | 		         CMO_SecPSP); | 
 | 		powerpc_firmware_features |= FW_FEATURE_CMO; | 
 | 		pSeries_coalesce_init(); | 
 | 	} else | 
 | 		pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP, | 
 | 		         CMO_SecPSP); | 
 | 	spin_unlock(&rtas_data_buf_lock); | 
 | 	pr_debug(" <- fw_cmo_feature_init()\n"); | 
 | } | 
 |  | 
 | /* | 
 |  * Early initialization.  Relocation is on but do not reference unbolted pages | 
 |  */ | 
 | static void __init pSeries_init_early(void) | 
 | { | 
 | 	pr_debug(" -> pSeries_init_early()\n"); | 
 |  | 
 | 	if (firmware_has_feature(FW_FEATURE_LPAR)) | 
 | 		find_udbg_vterm(); | 
 |  | 
 | 	if (firmware_has_feature(FW_FEATURE_DABR)) | 
 | 		ppc_md.set_dabr = pseries_set_dabr; | 
 | 	else if (firmware_has_feature(FW_FEATURE_XDABR)) | 
 | 		ppc_md.set_dabr = pseries_set_xdabr; | 
 |  | 
 | 	pSeries_cmo_feature_init(); | 
 | 	iommu_init_early_pSeries(); | 
 |  | 
 | 	pr_debug(" <- pSeries_init_early()\n"); | 
 | } | 
 |  | 
 | /* | 
 |  * Called very early, MMU is off, device-tree isn't unflattened | 
 |  */ | 
 |  | 
 | static int __init pSeries_probe_hypertas(unsigned long node, | 
 | 					 const char *uname, int depth, | 
 | 					 void *data) | 
 | { | 
 | 	const char *hypertas; | 
 | 	unsigned long len; | 
 |  | 
 | 	if (depth != 1 || | 
 | 	    (strcmp(uname, "rtas") != 0 && strcmp(uname, "rtas@0") != 0)) | 
 | 		return 0; | 
 |  | 
 | 	hypertas = of_get_flat_dt_prop(node, "ibm,hypertas-functions", &len); | 
 | 	if (!hypertas) | 
 | 		return 1; | 
 |  | 
 | 	powerpc_firmware_features |= FW_FEATURE_LPAR; | 
 | 	fw_feature_init(hypertas, len); | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | static int __init pSeries_probe(void) | 
 | { | 
 | 	unsigned long root = of_get_flat_dt_root(); | 
 |  	char *dtype = of_get_flat_dt_prop(root, "device_type", NULL); | 
 |  | 
 |  	if (dtype == NULL) | 
 |  		return 0; | 
 |  	if (strcmp(dtype, "chrp")) | 
 | 		return 0; | 
 |  | 
 | 	/* Cell blades firmware claims to be chrp while it's not. Until this | 
 | 	 * is fixed, we need to avoid those here. | 
 | 	 */ | 
 | 	if (of_flat_dt_is_compatible(root, "IBM,CPBW-1.0") || | 
 | 	    of_flat_dt_is_compatible(root, "IBM,CBEA")) | 
 | 		return 0; | 
 |  | 
 | 	pr_debug("pSeries detected, looking for LPAR capability...\n"); | 
 |  | 
 | 	/* Now try to figure out if we are running on LPAR */ | 
 | 	of_scan_flat_dt(pSeries_probe_hypertas, NULL); | 
 |  | 
 | 	if (firmware_has_feature(FW_FEATURE_LPAR)) | 
 | 		hpte_init_lpar(); | 
 | 	else | 
 | 		hpte_init_native(); | 
 |  | 
 | 	pr_debug("Machine is%s LPAR !\n", | 
 | 	         (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not"); | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 |  | 
 | DECLARE_PER_CPU(long, smt_snooze_delay); | 
 |  | 
 | static void pseries_dedicated_idle_sleep(void) | 
 | {  | 
 | 	unsigned int cpu = smp_processor_id(); | 
 | 	unsigned long start_snooze; | 
 | 	unsigned long in_purr, out_purr; | 
 | 	long snooze = __get_cpu_var(smt_snooze_delay); | 
 |  | 
 | 	/* | 
 | 	 * Indicate to the HV that we are idle. Now would be | 
 | 	 * a good time to find other work to dispatch. | 
 | 	 */ | 
 | 	get_lppaca()->idle = 1; | 
 | 	get_lppaca()->donate_dedicated_cpu = 1; | 
 | 	in_purr = mfspr(SPRN_PURR); | 
 |  | 
 | 	/* | 
 | 	 * We come in with interrupts disabled, and need_resched() | 
 | 	 * has been checked recently.  If we should poll for a little | 
 | 	 * while, do so. | 
 | 	 */ | 
 | 	if (snooze) { | 
 | 		start_snooze = get_tb() + snooze * tb_ticks_per_usec; | 
 | 		local_irq_enable(); | 
 | 		set_thread_flag(TIF_POLLING_NRFLAG); | 
 |  | 
 | 		while ((snooze < 0) || (get_tb() < start_snooze)) { | 
 | 			if (need_resched() || cpu_is_offline(cpu)) | 
 | 				goto out; | 
 | 			ppc64_runlatch_off(); | 
 | 			HMT_low(); | 
 | 			HMT_very_low(); | 
 | 		} | 
 |  | 
 | 		HMT_medium(); | 
 | 		clear_thread_flag(TIF_POLLING_NRFLAG); | 
 | 		smp_mb(); | 
 | 		local_irq_disable(); | 
 | 		if (need_resched() || cpu_is_offline(cpu)) | 
 | 			goto out; | 
 | 	} | 
 |  | 
 | 	cede_processor(); | 
 |  | 
 | out: | 
 | 	HMT_medium(); | 
 | 	out_purr = mfspr(SPRN_PURR); | 
 | 	get_lppaca()->wait_state_cycles += out_purr - in_purr; | 
 | 	get_lppaca()->donate_dedicated_cpu = 0; | 
 | 	get_lppaca()->idle = 0; | 
 | } | 
 |  | 
 | static void pseries_shared_idle_sleep(void) | 
 | { | 
 | 	/* | 
 | 	 * Indicate to the HV that we are idle. Now would be | 
 | 	 * a good time to find other work to dispatch. | 
 | 	 */ | 
 | 	get_lppaca()->idle = 1; | 
 |  | 
 | 	/* | 
 | 	 * Yield the processor to the hypervisor.  We return if | 
 | 	 * an external interrupt occurs (which are driven prior | 
 | 	 * to returning here) or if a prod occurs from another | 
 | 	 * processor. When returning here, external interrupts | 
 | 	 * are enabled. | 
 | 	 */ | 
 | 	cede_processor(); | 
 |  | 
 | 	get_lppaca()->idle = 0; | 
 | } | 
 |  | 
 | static int pSeries_pci_probe_mode(struct pci_bus *bus) | 
 | { | 
 | 	if (firmware_has_feature(FW_FEATURE_LPAR)) | 
 | 		return PCI_PROBE_DEVTREE; | 
 | 	return PCI_PROBE_NORMAL; | 
 | } | 
 |  | 
 | /** | 
 |  * pSeries_power_off - tell firmware about how to power off the system. | 
 |  * | 
 |  * This function calls either the power-off rtas token in normal cases | 
 |  * or the ibm,power-off-ups token (if present & requested) in case of | 
 |  * a power failure. If power-off token is used, power on will only be | 
 |  * possible with power button press. If ibm,power-off-ups token is used | 
 |  * it will allow auto poweron after power is restored. | 
 |  */ | 
 | static void pSeries_power_off(void) | 
 | { | 
 | 	int rc; | 
 | 	int rtas_poweroff_ups_token = rtas_token("ibm,power-off-ups"); | 
 |  | 
 | 	if (rtas_flash_term_hook) | 
 | 		rtas_flash_term_hook(SYS_POWER_OFF); | 
 |  | 
 | 	if (rtas_poweron_auto == 0 || | 
 | 		rtas_poweroff_ups_token == RTAS_UNKNOWN_SERVICE) { | 
 | 		rc = rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1); | 
 | 		printk(KERN_INFO "RTAS power-off returned %d\n", rc); | 
 | 	} else { | 
 | 		rc = rtas_call(rtas_poweroff_ups_token, 0, 1, NULL); | 
 | 		printk(KERN_INFO "RTAS ibm,power-off-ups returned %d\n", rc); | 
 | 	} | 
 | 	for (;;); | 
 | } | 
 |  | 
 | #ifndef CONFIG_PCI | 
 | void pSeries_final_fixup(void) { } | 
 | #endif | 
 |  | 
 | define_machine(pseries) { | 
 | 	.name			= "pSeries", | 
 | 	.probe			= pSeries_probe, | 
 | 	.setup_arch		= pSeries_setup_arch, | 
 | 	.init_early		= pSeries_init_early, | 
 | 	.show_cpuinfo		= pSeries_show_cpuinfo, | 
 | 	.log_error		= pSeries_log_error, | 
 | 	.pcibios_fixup		= pSeries_final_fixup, | 
 | 	.pci_probe_mode		= pSeries_pci_probe_mode, | 
 | 	.restart		= rtas_restart, | 
 | 	.power_off		= pSeries_power_off, | 
 | 	.halt			= rtas_halt, | 
 | 	.panic			= rtas_os_term, | 
 | 	.get_boot_time		= rtas_get_boot_time, | 
 | 	.get_rtc_time		= rtas_get_rtc_time, | 
 | 	.set_rtc_time		= rtas_set_rtc_time, | 
 | 	.calibrate_decr		= generic_calibrate_decr, | 
 | 	.progress		= rtas_progress, | 
 | 	.system_reset_exception = pSeries_system_reset_exception, | 
 | 	.machine_check_exception = pSeries_machine_check_exception, | 
 | }; |