| /* |
| * Device Tree support for Armada 370 and XP platforms. |
| * |
| * Copyright (C) 2012 Marvell |
| * |
| * Lior Amsalem <alior@marvell.com> |
| * Gregory CLEMENT <gregory.clement@free-electrons.com> |
| * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/of_address.h> |
| #include <linux/of_fdt.h> |
| #include <linux/io.h> |
| #include <linux/clocksource.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/memblock.h> |
| #include <linux/mbus.h> |
| #include <linux/slab.h> |
| #include <linux/irqchip.h> |
| #include <asm/hardware/cache-l2x0.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/time.h> |
| #include <asm/smp_scu.h> |
| #include "armada-370-xp.h" |
| #include "common.h" |
| #include "coherency.h" |
| #include "mvebu-soc-id.h" |
| |
| static void __iomem *scu_base; |
| |
| /* |
| * Enables the SCU when available. Obviously, this is only useful on |
| * Cortex-A based SOCs, not on PJ4B based ones. |
| */ |
| static void __init mvebu_scu_enable(void) |
| { |
| struct device_node *np = |
| of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); |
| if (np) { |
| scu_base = of_iomap(np, 0); |
| scu_enable(scu_base); |
| of_node_put(np); |
| } |
| } |
| |
| void __iomem *mvebu_get_scu_base(void) |
| { |
| return scu_base; |
| } |
| |
| /* |
| * When returning from suspend, the platform goes through the |
| * bootloader, which executes its DDR3 training code. This code has |
| * the unfortunate idea of using the first 10 KB of each DRAM bank to |
| * exercise the RAM and calculate the optimal timings. Therefore, this |
| * area of RAM is overwritten, and shouldn't be used by the kernel if |
| * suspend/resume is supported. |
| */ |
| |
| #ifdef CONFIG_SUSPEND |
| #define MVEBU_DDR_TRAINING_AREA_SZ (10 * SZ_1K) |
| static int __init mvebu_scan_mem(unsigned long node, const char *uname, |
| int depth, void *data) |
| { |
| const char *type = of_get_flat_dt_prop(node, "device_type", NULL); |
| const __be32 *reg, *endp; |
| int l; |
| |
| if (type == NULL || strcmp(type, "memory")) |
| return 0; |
| |
| reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l); |
| if (reg == NULL) |
| reg = of_get_flat_dt_prop(node, "reg", &l); |
| if (reg == NULL) |
| return 0; |
| |
| endp = reg + (l / sizeof(__be32)); |
| while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { |
| u64 base, size; |
| |
| base = dt_mem_next_cell(dt_root_addr_cells, ®); |
| size = dt_mem_next_cell(dt_root_size_cells, ®); |
| |
| memblock_reserve(base, MVEBU_DDR_TRAINING_AREA_SZ); |
| } |
| |
| return 0; |
| } |
| |
| static void __init mvebu_memblock_reserve(void) |
| { |
| of_scan_flat_dt(mvebu_scan_mem, NULL); |
| } |
| #else |
| static void __init mvebu_memblock_reserve(void) {} |
| #endif |
| |
| static void __init mvebu_init_irq(void) |
| { |
| irqchip_init(); |
| mvebu_scu_enable(); |
| coherency_init(); |
| BUG_ON(mvebu_mbus_dt_init(coherency_available())); |
| } |
| |
| static void __init i2c_quirk(void) |
| { |
| struct device_node *np; |
| u32 dev, rev; |
| |
| /* |
| * Only revisons more recent than A0 support the offload |
| * mechanism. We can exit only if we are sure that we can |
| * get the SoC revision and it is more recent than A0. |
| */ |
| if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > MV78XX0_A0_REV) |
| return; |
| |
| for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") { |
| struct property *new_compat; |
| |
| new_compat = kzalloc(sizeof(*new_compat), GFP_KERNEL); |
| |
| new_compat->name = kstrdup("compatible", GFP_KERNEL); |
| new_compat->length = sizeof("marvell,mv78230-a0-i2c"); |
| new_compat->value = kstrdup("marvell,mv78230-a0-i2c", |
| GFP_KERNEL); |
| |
| of_update_property(np, new_compat); |
| } |
| return; |
| } |
| |
| static void __init mvebu_dt_init(void) |
| { |
| if (of_machine_is_compatible("marvell,armadaxp")) |
| i2c_quirk(); |
| } |
| |
| static void __init armada_370_xp_dt_fixup(void) |
| { |
| #ifdef CONFIG_SMP |
| smp_set_ops(smp_ops(armada_xp_smp_ops)); |
| #endif |
| } |
| |
| static const char * const armada_370_xp_dt_compat[] __initconst = { |
| "marvell,armada-370-xp", |
| NULL, |
| }; |
| |
| DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)") |
| .l2c_aux_val = 0, |
| .l2c_aux_mask = ~0, |
| .init_machine = mvebu_dt_init, |
| .init_irq = mvebu_init_irq, |
| .restart = mvebu_restart, |
| .reserve = mvebu_memblock_reserve, |
| .dt_compat = armada_370_xp_dt_compat, |
| .dt_fixup = armada_370_xp_dt_fixup, |
| MACHINE_END |
| |
| static const char * const armada_375_dt_compat[] __initconst = { |
| "marvell,armada375", |
| NULL, |
| }; |
| |
| DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)") |
| .l2c_aux_val = 0, |
| .l2c_aux_mask = ~0, |
| .init_irq = mvebu_init_irq, |
| .init_machine = mvebu_dt_init, |
| .restart = mvebu_restart, |
| .dt_compat = armada_375_dt_compat, |
| MACHINE_END |
| |
| static const char * const armada_38x_dt_compat[] __initconst = { |
| "marvell,armada380", |
| "marvell,armada385", |
| NULL, |
| }; |
| |
| DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)") |
| .l2c_aux_val = 0, |
| .l2c_aux_mask = ~0, |
| .init_irq = mvebu_init_irq, |
| .restart = mvebu_restart, |
| .dt_compat = armada_38x_dt_compat, |
| MACHINE_END |
| |
| static const char * const armada_39x_dt_compat[] __initconst = { |
| "marvell,armada390", |
| "marvell,armada398", |
| NULL, |
| }; |
| |
| DT_MACHINE_START(ARMADA_39X_DT, "Marvell Armada 39x (Device Tree)") |
| .l2c_aux_val = 0, |
| .l2c_aux_mask = ~0, |
| .init_irq = mvebu_init_irq, |
| .restart = mvebu_restart, |
| .dt_compat = armada_39x_dt_compat, |
| MACHINE_END |