| /* | |
| * Copyright 2003 Digi International (www.digi.com) | |
| * Scott H Kilau <Scott_Kilau at digi dot com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2, or (at your option) | |
| * any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the | |
| * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR | |
| * PURPOSE. See the GNU General Public License for more details. | |
| */ | |
| #ifndef __DIGI_H | |
| #define __DIGI_H | |
| #ifndef TIOCM_LE | |
| #define TIOCM_LE 0x01 /* line enable */ | |
| #define TIOCM_DTR 0x02 /* data terminal ready */ | |
| #define TIOCM_RTS 0x04 /* request to send */ | |
| #define TIOCM_ST 0x08 /* secondary transmit */ | |
| #define TIOCM_SR 0x10 /* secondary receive */ | |
| #define TIOCM_CTS 0x20 /* clear to send */ | |
| #define TIOCM_CAR 0x40 /* carrier detect */ | |
| #define TIOCM_RNG 0x80 /* ring indicator */ | |
| #define TIOCM_DSR 0x100 /* data set ready */ | |
| #define TIOCM_RI TIOCM_RNG /* ring (alternate) */ | |
| #define TIOCM_CD TIOCM_CAR /* carrier detect (alt) */ | |
| #endif | |
| #if !defined(TIOCMSET) | |
| #define TIOCMSET (('d'<<8) | 252) /* set modem ctrl state */ | |
| #define TIOCMGET (('d'<<8) | 253) /* set modem ctrl state */ | |
| #endif | |
| #if !defined(TIOCMBIC) | |
| #define TIOCMBIC (('d'<<8) | 254) /* set modem ctrl state */ | |
| #define TIOCMBIS (('d'<<8) | 255) /* set modem ctrl state */ | |
| #endif | |
| #define DIGI_GETA (('e'<<8) | 94) /* Read params */ | |
| #define DIGI_SETA (('e'<<8) | 95) /* Set params */ | |
| #define DIGI_SETAW (('e'<<8) | 96) /* Drain & set params */ | |
| #define DIGI_SETAF (('e'<<8) | 97) /* Drain, flush & set params */ | |
| #define DIGI_GET_NI_INFO (('d'<<8) | 250) /* Non-intelligent state info */ | |
| #define DIGI_LOOPBACK (('d'<<8) | 252) /* | |
| * Enable/disable UART | |
| * internal loopback | |
| */ | |
| #define DIGI_FAST 0x0002 /* Fast baud rates */ | |
| #define RTSPACE 0x0004 /* RTS input flow control */ | |
| #define CTSPACE 0x0008 /* CTS output flow control */ | |
| #define DIGI_COOK 0x0080 /* Cooked processing done in FEP */ | |
| #define DIGI_FORCEDCD 0x0100 /* Force carrier */ | |
| #define DIGI_ALTPIN 0x0200 /* Alternate RJ-45 pin config */ | |
| #define DIGI_PRINTER 0x0800 /* Hold port open for flow cntrl*/ | |
| #define DIGI_DTR_TOGGLE 0x2000 /* Support DTR Toggle */ | |
| #define DIGI_RTS_TOGGLE 0x8000 /* Support RTS Toggle */ | |
| #define DIGI_PLEN 28 /* String length */ | |
| #define DIGI_TSIZ 10 /* Terminal string len */ | |
| /************************************************************************ | |
| * Structure used with ioctl commands for DIGI parameters. | |
| ************************************************************************/ | |
| struct digi_t { | |
| unsigned short digi_flags; /* Flags (see above) */ | |
| unsigned short digi_maxcps; /* Max printer CPS */ | |
| unsigned short digi_maxchar; /* Max chars in print queue */ | |
| unsigned short digi_bufsize; /* Buffer size */ | |
| unsigned char digi_onlen; /* Length of ON string */ | |
| unsigned char digi_offlen; /* Length of OFF string */ | |
| char digi_onstr[DIGI_PLEN]; /* Printer on string */ | |
| char digi_offstr[DIGI_PLEN]; /* Printer off string */ | |
| char digi_term[DIGI_TSIZ]; /* terminal string */ | |
| }; | |
| /************************************************************************ | |
| * Structure to get driver status information | |
| ************************************************************************/ | |
| struct digi_dinfo { | |
| unsigned int dinfo_nboards; /* # boards configured */ | |
| char dinfo_reserved[12]; /* for future expansion */ | |
| char dinfo_version[16]; /* driver version */ | |
| }; | |
| #define DIGI_GETDD (('d'<<8) | 248) /* get driver info */ | |
| /************************************************************************ | |
| * Structure used with ioctl commands for per-board information | |
| * | |
| * physsize and memsize differ when board has "windowed" memory | |
| ************************************************************************/ | |
| struct digi_info { | |
| unsigned int info_bdnum; /* Board number (0 based) */ | |
| unsigned int info_ioport; /* io port address */ | |
| unsigned int info_physaddr; /* memory address */ | |
| unsigned int info_physsize; /* Size of host mem window */ | |
| unsigned int info_memsize; /* Amount of dual-port mem */ | |
| /* on board */ | |
| unsigned short info_bdtype; /* Board type */ | |
| unsigned short info_nports; /* number of ports */ | |
| char info_bdstate; /* board state */ | |
| char info_reserved[7]; /* for future expansion */ | |
| }; | |
| #define DIGI_GETBD (('d'<<8) | 249) /* get board info */ | |
| struct digi_getbuffer /* Struct for holding buffer use counts */ | |
| { | |
| unsigned long tIn; | |
| unsigned long tOut; | |
| unsigned long rxbuf; | |
| unsigned long txbuf; | |
| unsigned long txdone; | |
| }; | |
| struct digi_getcounter { | |
| unsigned long norun; /* number of UART overrun errors */ | |
| unsigned long noflow; /* number of buffer overflow errors */ | |
| unsigned long nframe; /* number of framing errors */ | |
| unsigned long nparity; /* number of parity errors */ | |
| unsigned long nbreak; /* number of breaks received */ | |
| unsigned long rbytes; /* number of received bytes */ | |
| unsigned long tbytes; /* number of bytes transmitted fully */ | |
| }; | |
| /* Board State Definitions */ | |
| #define BD_RUNNING 0x0 | |
| #define BD_NOFEP 0x5 | |
| #define DIGI_SETCUSTOMBAUD _IOW('e', 106, int) /* Set integer baud rate */ | |
| #define DIGI_GETCUSTOMBAUD _IOR('e', 107, int) /* Get integer baud rate */ | |
| #define DIGI_REALPORT_GETBUFFERS (('e'<<8) | 108) | |
| #define DIGI_REALPORT_SENDIMMEDIATE (('e'<<8) | 109) | |
| #define DIGI_REALPORT_GETCOUNTERS (('e'<<8) | 110) | |
| #define DIGI_REALPORT_GETEVENTS (('e'<<8) | 111) | |
| #define EV_OPU 0x0001 /* !<Output paused by client */ | |
| #define EV_OPS 0x0002 /* !<Output paused by reqular sw flowctrl */ | |
| #define EV_IPU 0x0010 /* !<Input paused unconditionally by user */ | |
| #define EV_IPS 0x0020 /* !<Input paused by high/low water marks */ | |
| #define EV_TXB 0x0040 /* !<Transmit break pending */ | |
| /* | |
| * This structure holds data needed for the intelligent <--> nonintelligent | |
| * DPA translation | |
| */ | |
| struct ni_info { | |
| int board; | |
| int channel; | |
| int dtr; | |
| int rts; | |
| int cts; | |
| int dsr; | |
| int ri; | |
| int dcd; | |
| int curtx; | |
| int currx; | |
| unsigned short iflag; | |
| unsigned short oflag; | |
| unsigned short cflag; | |
| unsigned short lflag; | |
| unsigned int mstat; | |
| unsigned char hflow; | |
| unsigned char xmit_stopped; | |
| unsigned char recv_stopped; | |
| unsigned int baud; | |
| }; | |
| #define T_CLASSIC 0002 | |
| #define T_PCIBUS 0400 | |
| #define T_NEO_EXPRESS 0001 | |
| #define T_NEO 0000 | |
| #define TTY_FLIPBUF_SIZE 512 | |
| #endif /* DIGI_H */ |