| /* | |
| * | |
| * Intel Management Engine Interface (Intel MEI) Linux driver | |
| * Copyright (c) 2003-2012, Intel Corporation. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms and conditions of the GNU General Public License, | |
| * version 2, as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/device.h> | |
| #include <linux/sched.h> | |
| #include <linux/watchdog.h> | |
| #include <linux/mei.h> | |
| #include "mei_dev.h" | |
| #include "hbm.h" | |
| #include "client.h" | |
| static const u8 mei_start_wd_params[] = { 0x02, 0x12, 0x13, 0x10 }; | |
| static const u8 mei_stop_wd_params[] = { 0x02, 0x02, 0x14, 0x10 }; | |
| /* | |
| * AMT Watchdog Device | |
| */ | |
| #define INTEL_AMT_WATCHDOG_ID "INTCAMT" | |
| /* UUIDs for AMT F/W clients */ | |
| const uuid_le mei_wd_guid = UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, 0x89, | |
| 0x9D, 0xA9, 0x15, 0x14, 0xCB, | |
| 0x32, 0xAB); | |
| static void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout) | |
| { | |
| dev_dbg(dev->dev, "wd: set timeout=%d.\n", timeout); | |
| memcpy(dev->wd_data, mei_start_wd_params, MEI_WD_HDR_SIZE); | |
| memcpy(dev->wd_data + MEI_WD_HDR_SIZE, &timeout, sizeof(u16)); | |
| } | |
| /** | |
| * mei_wd_host_init - connect to the watchdog client | |
| * | |
| * @dev: the device structure | |
| * | |
| * Return: -ENOTTY if wd client cannot be found | |
| * -EIO if write has failed | |
| * 0 on success | |
| */ | |
| int mei_wd_host_init(struct mei_device *dev) | |
| { | |
| struct mei_cl *cl = &dev->wd_cl; | |
| struct mei_me_client *me_cl; | |
| int ret; | |
| mei_cl_init(cl, dev); | |
| dev->wd_timeout = MEI_WD_DEFAULT_TIMEOUT; | |
| dev->wd_state = MEI_WD_IDLE; | |
| /* check for valid client id */ | |
| me_cl = mei_me_cl_by_uuid(dev, &mei_wd_guid); | |
| if (!me_cl) { | |
| dev_info(dev->dev, "wd: failed to find the client\n"); | |
| return -ENOTTY; | |
| } | |
| cl->me_client_id = me_cl->client_id; | |
| cl->cl_uuid = me_cl->props.protocol_name; | |
| mei_me_cl_put(me_cl); | |
| ret = mei_cl_link(cl, MEI_WD_HOST_CLIENT_ID); | |
| if (ret < 0) { | |
| dev_info(dev->dev, "wd: failed link client\n"); | |
| return ret; | |
| } | |
| ret = mei_cl_connect(cl, NULL); | |
| if (ret) { | |
| dev_err(dev->dev, "wd: failed to connect = %d\n", ret); | |
| mei_cl_unlink(cl); | |
| return ret; | |
| } | |
| ret = mei_watchdog_register(dev); | |
| if (ret) { | |
| mei_cl_disconnect(cl); | |
| mei_cl_unlink(cl); | |
| } | |
| return ret; | |
| } | |
| /** | |
| * mei_wd_send - sends watch dog message to fw. | |
| * | |
| * @dev: the device structure | |
| * | |
| * Return: 0 if success, | |
| * -EIO when message send fails | |
| * -EINVAL when invalid message is to be sent | |
| * -ENODEV on flow control failure | |
| */ | |
| int mei_wd_send(struct mei_device *dev) | |
| { | |
| struct mei_cl *cl = &dev->wd_cl; | |
| struct mei_msg_hdr hdr; | |
| int ret; | |
| hdr.host_addr = cl->host_client_id; | |
| hdr.me_addr = cl->me_client_id; | |
| hdr.msg_complete = 1; | |
| hdr.reserved = 0; | |
| hdr.internal = 0; | |
| if (!memcmp(dev->wd_data, mei_start_wd_params, MEI_WD_HDR_SIZE)) | |
| hdr.length = MEI_WD_START_MSG_SIZE; | |
| else if (!memcmp(dev->wd_data, mei_stop_wd_params, MEI_WD_HDR_SIZE)) | |
| hdr.length = MEI_WD_STOP_MSG_SIZE; | |
| else { | |
| dev_err(dev->dev, "wd: invalid message is to be sent, aborting\n"); | |
| return -EINVAL; | |
| } | |
| ret = mei_write_message(dev, &hdr, dev->wd_data); | |
| if (ret) { | |
| dev_err(dev->dev, "wd: write message failed\n"); | |
| return ret; | |
| } | |
| ret = mei_cl_flow_ctrl_reduce(cl); | |
| if (ret) { | |
| dev_err(dev->dev, "wd: flow_ctrl_reduce failed.\n"); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * mei_wd_stop - sends watchdog stop message to fw. | |
| * | |
| * @dev: the device structure | |
| * | |
| * Return: 0 if success | |
| * on error: | |
| * -EIO when message send fails | |
| * -EINVAL when invalid message is to be sent | |
| * -ETIME on message timeout | |
| */ | |
| int mei_wd_stop(struct mei_device *dev) | |
| { | |
| struct mei_cl *cl = &dev->wd_cl; | |
| int ret; | |
| if (!mei_cl_is_connected(cl) || | |
| dev->wd_state != MEI_WD_RUNNING) | |
| return 0; | |
| memcpy(dev->wd_data, mei_stop_wd_params, MEI_WD_STOP_MSG_SIZE); | |
| dev->wd_state = MEI_WD_STOPPING; | |
| ret = mei_cl_flow_ctrl_creds(cl); | |
| if (ret < 0) | |
| goto err; | |
| if (ret && mei_hbuf_acquire(dev)) { | |
| ret = mei_wd_send(dev); | |
| if (ret) | |
| goto err; | |
| dev->wd_pending = false; | |
| } else { | |
| dev->wd_pending = true; | |
| } | |
| mutex_unlock(&dev->device_lock); | |
| ret = wait_event_timeout(dev->wait_stop_wd, | |
| dev->wd_state == MEI_WD_IDLE, | |
| msecs_to_jiffies(MEI_WD_STOP_TIMEOUT)); | |
| mutex_lock(&dev->device_lock); | |
| if (dev->wd_state != MEI_WD_IDLE) { | |
| /* timeout */ | |
| ret = -ETIME; | |
| dev_warn(dev->dev, "wd: stop failed to complete ret=%d\n", ret); | |
| goto err; | |
| } | |
| dev_dbg(dev->dev, "wd: stop completed after %u msec\n", | |
| MEI_WD_STOP_TIMEOUT - jiffies_to_msecs(ret)); | |
| return 0; | |
| err: | |
| return ret; | |
| } | |
| /** | |
| * mei_wd_ops_start - wd start command from the watchdog core. | |
| * | |
| * @wd_dev: watchdog device struct | |
| * | |
| * Return: 0 if success, negative errno code for failure | |
| */ | |
| static int mei_wd_ops_start(struct watchdog_device *wd_dev) | |
| { | |
| struct mei_device *dev; | |
| struct mei_cl *cl; | |
| int err = -ENODEV; | |
| dev = watchdog_get_drvdata(wd_dev); | |
| if (!dev) | |
| return -ENODEV; | |
| cl = &dev->wd_cl; | |
| mutex_lock(&dev->device_lock); | |
| if (dev->dev_state != MEI_DEV_ENABLED) { | |
| dev_dbg(dev->dev, "wd: dev_state != MEI_DEV_ENABLED dev_state = %s\n", | |
| mei_dev_state_str(dev->dev_state)); | |
| goto end_unlock; | |
| } | |
| if (!mei_cl_is_connected(cl)) { | |
| cl_dbg(dev, cl, "MEI Driver is not connected to Watchdog Client\n"); | |
| goto end_unlock; | |
| } | |
| mei_wd_set_start_timeout(dev, dev->wd_timeout); | |
| err = 0; | |
| end_unlock: | |
| mutex_unlock(&dev->device_lock); | |
| return err; | |
| } | |
| /** | |
| * mei_wd_ops_stop - wd stop command from the watchdog core. | |
| * | |
| * @wd_dev: watchdog device struct | |
| * | |
| * Return: 0 if success, negative errno code for failure | |
| */ | |
| static int mei_wd_ops_stop(struct watchdog_device *wd_dev) | |
| { | |
| struct mei_device *dev; | |
| dev = watchdog_get_drvdata(wd_dev); | |
| if (!dev) | |
| return -ENODEV; | |
| mutex_lock(&dev->device_lock); | |
| mei_wd_stop(dev); | |
| mutex_unlock(&dev->device_lock); | |
| return 0; | |
| } | |
| /** | |
| * mei_wd_ops_ping - wd ping command from the watchdog core. | |
| * | |
| * @wd_dev: watchdog device struct | |
| * | |
| * Return: 0 if success, negative errno code for failure | |
| */ | |
| static int mei_wd_ops_ping(struct watchdog_device *wd_dev) | |
| { | |
| struct mei_device *dev; | |
| struct mei_cl *cl; | |
| int ret; | |
| dev = watchdog_get_drvdata(wd_dev); | |
| if (!dev) | |
| return -ENODEV; | |
| cl = &dev->wd_cl; | |
| mutex_lock(&dev->device_lock); | |
| if (!mei_cl_is_connected(cl)) { | |
| cl_err(dev, cl, "wd: not connected.\n"); | |
| ret = -ENODEV; | |
| goto end; | |
| } | |
| dev->wd_state = MEI_WD_RUNNING; | |
| ret = mei_cl_flow_ctrl_creds(cl); | |
| if (ret < 0) | |
| goto end; | |
| /* Check if we can send the ping to HW*/ | |
| if (ret && mei_hbuf_acquire(dev)) { | |
| dev_dbg(dev->dev, "wd: sending ping\n"); | |
| ret = mei_wd_send(dev); | |
| if (ret) | |
| goto end; | |
| dev->wd_pending = false; | |
| } else { | |
| dev->wd_pending = true; | |
| } | |
| end: | |
| mutex_unlock(&dev->device_lock); | |
| return ret; | |
| } | |
| /** | |
| * mei_wd_ops_set_timeout - wd set timeout command from the watchdog core. | |
| * | |
| * @wd_dev: watchdog device struct | |
| * @timeout: timeout value to set | |
| * | |
| * Return: 0 if success, negative errno code for failure | |
| */ | |
| static int mei_wd_ops_set_timeout(struct watchdog_device *wd_dev, | |
| unsigned int timeout) | |
| { | |
| struct mei_device *dev; | |
| dev = watchdog_get_drvdata(wd_dev); | |
| if (!dev) | |
| return -ENODEV; | |
| /* Check Timeout value */ | |
| if (timeout < MEI_WD_MIN_TIMEOUT || timeout > MEI_WD_MAX_TIMEOUT) | |
| return -EINVAL; | |
| mutex_lock(&dev->device_lock); | |
| dev->wd_timeout = timeout; | |
| wd_dev->timeout = timeout; | |
| mei_wd_set_start_timeout(dev, dev->wd_timeout); | |
| mutex_unlock(&dev->device_lock); | |
| return 0; | |
| } | |
| /* | |
| * Watchdog Device structs | |
| */ | |
| static const struct watchdog_ops wd_ops = { | |
| .owner = THIS_MODULE, | |
| .start = mei_wd_ops_start, | |
| .stop = mei_wd_ops_stop, | |
| .ping = mei_wd_ops_ping, | |
| .set_timeout = mei_wd_ops_set_timeout, | |
| }; | |
| static const struct watchdog_info wd_info = { | |
| .identity = INTEL_AMT_WATCHDOG_ID, | |
| .options = WDIOF_KEEPALIVEPING | | |
| WDIOF_SETTIMEOUT | | |
| WDIOF_ALARMONLY, | |
| }; | |
| static struct watchdog_device amt_wd_dev = { | |
| .info = &wd_info, | |
| .ops = &wd_ops, | |
| .timeout = MEI_WD_DEFAULT_TIMEOUT, | |
| .min_timeout = MEI_WD_MIN_TIMEOUT, | |
| .max_timeout = MEI_WD_MAX_TIMEOUT, | |
| }; | |
| int mei_watchdog_register(struct mei_device *dev) | |
| { | |
| int ret; | |
| /* unlock to perserve correct locking order */ | |
| mutex_unlock(&dev->device_lock); | |
| ret = watchdog_register_device(&amt_wd_dev); | |
| mutex_lock(&dev->device_lock); | |
| if (ret) { | |
| dev_err(dev->dev, "wd: unable to register watchdog device = %d.\n", | |
| ret); | |
| return ret; | |
| } | |
| dev_dbg(dev->dev, "wd: successfully register watchdog interface.\n"); | |
| watchdog_set_drvdata(&amt_wd_dev, dev); | |
| return 0; | |
| } | |
| void mei_watchdog_unregister(struct mei_device *dev) | |
| { | |
| if (watchdog_get_drvdata(&amt_wd_dev) == NULL) | |
| return; | |
| watchdog_set_drvdata(&amt_wd_dev, NULL); | |
| watchdog_unregister_device(&amt_wd_dev); | |
| } | |